MTFCA Forum

I sent an email with my contact info

That would be great

I’m looking for a front wheel hub
Thanks

i bought new bearings and they seem difficult to thread on to the spindles. i ran a chase nut on each side and cleaned up the spindles but the threads in the bearings are still tight. i can get them on but would need a wrench to get them up the spindle. i cant get them to run up by hand. the chase n...

Item found

I am looking for a front wheel hub for my T

Thanks

Rebuilding a carburetor and this is the missing part
Thanks for looking

Tim, thanks for the picture of the hydraulic brake system. i forgot they existed. did you use the sure- stop system or maybe another vendor. i don't go fast but it just appears that where ever i go there is a stop light or stop sign at the bottom of a hill. never on the upside of the hill!!!!! all g...

All great info My t is basically a 23/24 car that has a wood cab pickup much like a tt would look like The bands stop it pretty good I did put brake shoes on and my club helped me figure out the brake rods so the parking brake works good also I live in an area that has hills and I use reverse and th...

i have considered installing the rocky mountain brakes on my 23 wood body truck. i could purchase them from a vendor, but i also have heard that the old style may be better or different. is it worth the effort to find an older set or just purchase a new set? im not familiar with the differences enou...

I will be tackling this tomorrow when the humidity breaks
I did replace the tires this winter using the same size as the old ones

Thanks for the help With the tire filled with air I am not able to put both bolts thru the mounting holes in the rim because the tire hits the bed if I try to rotate it I was wondering if I only used the upper bolt if that’s all it needed Did the bolt in the running board have another purpose? If I ...

Can anyone please tell me how the tire attaches to the bolts in the running board or to the one on the cab side I haven’t been able to see how others are done Any ideas appreciated Thanks 47D0194F-2A1A-4B74-A56B-640D4DFA84C3.jpeg BF3AB746-D491-44C9-BB82-7C41CA2C4140.jpeg 7A45B832-D121-407C-984E-0E29...

Thanks for the advice
Going with the flat core

I took my radiator to a repair shop for some cleaning and repair and it is time for replacement I read that flat tube radiator cool better than the round tube It the cooling of the flat tube that much better that it is worth changing from the original? Any of the local car shows that I plan on atten...

I sent the motor out for a rebuild
I am installing new tires and painting the wheels

01B02AAE-9CF2-4E60-B800-186FF760A492.jpeg While driving this summer I heard a terrible noise and the truck stopped running The motor was stuck and I could not get it to budge Some club members recommended removing the starter and there is some metal piece which I think is broken I think this fix is...

I put a rebuilt carb on Cleaned the plugs Installed the rebuilt coils Still trying to figure out the timer aspect That’s is sort of my downfall I think Maybe by August I will figure out how to make it start and run! But I do have one question about starting So how could I tell if my truck has a magn...

The coils wouldn’t buzz at all
I am going back out to try the adjustments for the timer.
The timer isn’t new but it didn’t look like it had anything wrong with it
It hasn’t run in 27 years but that’s all going to change this week

Thanks for the club information
I will reach out to them this week

Ok New to model t I had the coils rebuilt I had the carb rebuilt Cleaned the plugs And it won’t start Tried the cleaning of the timer It is a new day timer Could it be the key switch? Also I’m trying to find a club near me I’m between Philadelphia and Allentown in the eastern part of Pa Any help I w...