MTFCA Forum

when i Put the brake lever all the way forward it gets stuck and will not come back until I move the lever on the trans up were it rides on the cam by the trans what do I need to adjust to fix this thanks mike

Hi I have a 1922 center door Canadian original I had to replace the door class in mine i used 1/2 round foam the dense one cut it in half clued three strips to each of the three sides of the frame of the window frame then rapped a black canvas cloth around the foam and glued it to the inside of the ...

hi all I am working on a 22 centerdoor with a Ruckstell rear end I had a leak were the shift lever housing bolts on it has two 7/16 fine thread bolts on one side of the housing and one on other side is a 7/16 bolt and a 9/16's head with a lock nut below it and a point on it it to go into something i...

hi pete i am in ontario i have test equitment but i am one hour north of toronto if it helps mike

looks good[image][/image]

email sent mike

thanks guys it may have been added but it matches the original interior so it will stay for now

hi I have a 1922 centerdoor looking for were the location of the switch for the dome light and what it may look like thanks mike

how are you window runs on the glass for the door mine is missing them not sure how to make them

hi i am building my motor in my 26 i am putting in a 280 cam were would i set the timing at i have been setting it at 15 ptdc as stock at number one cylinder is there different timing when using a 280 cam i also put in high compression pistons thank s mike

has anyone dun tours in a 22 centerdoor is it a good riding car thanks mike

I put one on my 26 coupe works ok so far

hi all I am removing the engine from a 15 roadster do I have to raise the body to get the engine out or anything else that i have to remove to get it out thanks for the help mike

how about some numbers for the led bulbs you are using for the headlights

they came out easy with a little heat and a 55 ton press

thanks guys the spring perches are on the wrong side will be switching them back thanks again mike

i am working on a 26 touring front axle problem is the axle is leaning to the rear of the car i know it has to lean to the front of the the bottom of the axle to the front just trying to see were the angle is built into the axle or is it built into the spring perches or the frame it steers so bad st...

i am working on a 27 touring with a vaporizer carb i have it running but it is missing the linkage for the carb looking for some pictures or diagrams of what I need to look for to get it working right thanks mike

if you make some I would be interested mike

I would be interested in a pair 26 coupe canadian

yes rear of trans

Just putting engine back together forth main oil hole does it go up of down thanks mike

0.681 4 OVER THE PIN SIZE

thanks guys that help alot mike

i have a 26 coupe made in Canada i want a set of sill plates not sure what they look like or if someone has the size of then bought a set from langs but they will not fit on the sill so if someone has a set they will sell or have a picture or the measurements of them let me know you mike

any more in put on this one any one

hi I have the engine out of my 26 coupe when I rebuilt it last year I put in a reground 270 cam I did not get the power increase I thought I might see I set the valves at 18 as per the shop I got it from has any body tried different setting at all if so what did you set them at and how did it run I ...

re building my 26 engine bought a 270 regrind cam just wondering if I need to set the timing different than the stock at 15 dec atdc i put in new ss valves and adjustable lifters and running high compression pistons thanks mike