MTFCA Forum

Dave,
Sent you an email. Tnx,
Ron

Dave,
I'm happy to take the other if it hasn't been asked for. Understand that $115 would take that one plus shipping?
My wife loves clocks. If affirmative, let me know and I'll send a check.
Email at rdwenzel at gmail dot com
Thanks much,
Ron in HSV, AL

Email sent.

Would like first refusal depending upon size, sir, if I happen to be first in the chute. Tnx, Ron

Morning, Ed,
What are the dimensions of the box, pls.
Tnx,
Ron

HI, Richard,

Would like one of these also if you have an additional one available. Tnx, Ron

My email rdwenzelATgmailDOTcom. Will need your address and amount (pls combine with exhaust pipe wrench order) to send check.

Thank you

Morning, Richard,

Would also like one if you have one available. Tnx, Ron

Need your email and address to send check, pls. Mine is rdwenzelATgmailDOTcom

Mark, sent you a text message for one of the two NH’s. Never know when you may need a spare. Tnx, Ron

Tim,

I'll take the APCO oil level gauge, pls. Sent email. Thanks, Ron

Donnie, pls put me down for a copy of your next printing. No hurry, sir. Thank you, Ron

Will do Rick. Thanks for the suggestion

And back to the top. Hard to believe no one currently wants a nice winter project '20 Center Door project. Offers considered.

Okay, Brad, another email sent with dims and photos. Ron

Sorry. I’ll try again in a little bit. Not sure what happened. Ron

Brad, not sure you got my email. Can you advise pls. Ron

And back to the top one more time. Nobody needs a good Center Door less chassis? Offers considered. Thank you

Evening Brad,
I may have one for you. I’ll send a photo by email with a few basic dimensions. I have the same door handles on my ‘22 Center Door. Not sure if they’re absolutely correct but I like ‘em. Tnx, Ron in HSV

BTTT. Offers considered.

Good morning, Walt, from your nearby Huntsville neighbor. I'll take them.
Pls email your address to me at rdwenzelATgmailDOTcom and I'll put you a check in the mail this morning.
This Model T thing is quickly becoming addictive!
Tnx,
Ron

Thanks FATMAN and MTFCA! Set of rears are on the way which I also will need.

Thanks, FATMAN and MTFCA!. They're on the way as surrogates until I repair/replace my L-shaped ones.

Hey, Bob, I’ll take em all, both fronts and rears. Please see my email.
Tnx
Ron

Afternoon, Bob, I’ll take them both. Pls see my email and wrap these up with the rears, please.
Tnx much,
Ron

Bob, sending you an email. Tnx Ron

Thx, Allan. I’ll see if I can scare up those posts.

Ron

And, an email. Thx
Ron

Thanks, Bob, sent you a PM.

Thanks, folks! I’ll have to check with Bob and this also gives me an excuse to get on the move and get the antique lathe out of storage and get it set up. Much appreciated.

Thanks, Mark. I must have missed the magic words when I was searching eBay. Took a close look and best I can tell the ones offered are worn as badly as are mine. May have to bite the bullet and use a repro set until I can find a good set, or, since here in HSV we’re a hotbed of R&D, I might just see...

For ‘22 Centerdoor. Seem to be rare and hard to find, ones that are not badly worn anyway. Anyone out there with a set for the rear as well?
Neither Hank Lee nor Model T Haven have any serviceable ones.
Thanks, Ron
email: rdwenzelATgmailDOTcom

Back to the top

Thanks Steve and Mark for having what I needed! Done

Thanks MTFCA!

Thanks, Steve,
Interested, sir. The stems are just under a half inch in dia. Can you pls shoot me an email with what you've got, condition and price. Much appreciated.
Ron
rdwenzelATgmailDOTcom

Thanks, Steve, I'll need your larger size, I believe. The stems will be just a touch under a half inch in diameter.

Anybody out there got a half dozen or so "old style" bridge washers for metal stem, demountable rims (wood spoke wheels)? Fixing to buy new tires and tubes and what I read out there says that the old style bridge washers work better than the newer repro flat versions. Much appreciated. Thank you. Ron

Back to the top.

And, my bad. Mistype on the phone area code for Mr. John Puckett.

CORRECT PHONE for John is (859)302-4057. Give him a call.

Tnx,

Ron

Posting this for a friend. For sale is a ready to paint ‘20 Center Door body thru primer. Includes all other metal including frame up including seats and interior upholstery, both of which are in pretty bad condition. Glass is there with two pieces needing replacement. Includes extra fenders. No dri...

Thanks Jim and MTFCA!

JIm,
Works for me. Don't want 'em looking new anyway. I'll take them. My email rdwenzelATgmailDOTcom
Tnx,
Ron

Jim, are they, or used to be nickel?
Tnx,
Ron

Ben, received the Hutchins and Stewart Warner horns. Very nicely done! Best of luck in passing along the rest of your parts.
If these horns are any indication, the rest of your parts must be in great shape.

Thanks, Ben and MTFCA,

Ron

And I’d like to procure two pair as well, pls
Ron Wenzel

Darel,
My colleague's husband is still interested but we need a photo or two of the weld repair on the fixture, pls.
Thanks,
Ron

Darel,

Received the ordered plates in the mail. Very nice repros. All set now with the '22 Center Door and the '29 A Speedster project!
Tnx much,
Ron

I, too, would like a copy please.
Regards,
Ron---------- rdwenzel@gmail.com

Hi, Tim,
Sent separate email requesting one each 28-29 Model A mount. Pls let me know where to send the check.
Tnx, Ron
Huntsville

Hi, Darrel,
Sent you an email ref purchase of one of your 1919-1925 patent plates. Email had typo of 1911-1925.
Thank you,
Ron Wenzel
Huntsville, AL 35824

I’d go $60 plus shipping.

Would 25 bucks plus shipping get it? Would go great on our recently acquired 1922 Center Door.
Thanks,
Ron Wenzel
rdwenzel@gmail.com

Search found 49 matches