Search found 30 matches

by Tim Moore
Wed May 06, 2020 9:43 pm
Forum: General Discussion Forum (started 2019)
Topic: Source of 6 Volt Battery
Replies: 32
Views: 1294

Re: Source of 6 Volt Battery

Charge it not change it, damn phone.
by Tim Moore
Wed May 06, 2020 9:41 pm
Forum: General Discussion Forum (started 2019)
Topic: Source of 6 Volt Battery
Replies: 32
Views: 1294

Re: Source of 6 Volt Battery

Yes they are usually available but this last weekend I also needed one for my Ford Jubilee tractor. For some reason it was hard to find a 6volt as none were available. I bought an 8 volt at Family Farm. I don't know how it will charge or how the lights will work but my tractor buddies all swear by t...
by Tim Moore
Fri Apr 10, 2020 12:17 pm
Forum: General Discussion Forum (started 2019)
Topic: foam filled tires
Replies: 17
Views: 1253

Re: foam filled tires

So far no trouble. I just push it around the yard so don't expect the foam to break down soon. Actually that expanding foam gets hard. When I first did this I figured it didn't work I would go to harbor freight and buy a solid tire. For some reason my wheelbarrow tires have never held air.
by Tim Moore
Thu Apr 09, 2020 4:13 pm
Forum: General Discussion Forum (started 2019)
Topic: foam filled tires
Replies: 17
Views: 1253

Re: foam filled tires

Spranger wheels, auto-correct on phone.
by Tim Moore
Thu Apr 09, 2020 4:13 pm
Forum: General Discussion Forum (started 2019)
Topic: foam filled tires
Replies: 17
Views: 1253

Re: foam filled tires

I have a set of Stranger wire wheels that came off a T that was used for mail delivery. The tires were solid rubber without the normal holes going horizontal like sometime seen on ton trucks, looked like normal tires. I took them off with a sawzall and it took a LONG time! This last fall I grabbed t...
by Tim Moore
Mon Mar 30, 2020 10:27 pm
Forum: Classifieds - Parts
Topic: 1917 Model T Ford Race Car Speedster Body
Replies: 3
Views: 816

Re: 1917 Model T Ford Race Car Speedster Body

34 posts and all of them are eBay listings not for sale here. I would think the classified section is for what is available to purchase within the MTFCA.
by Tim Moore
Sun Mar 22, 2020 1:56 pm
Forum: OT - Off topic
Topic: $5 Rigid shop vac!
Replies: 22
Views: 1232

Re: $5 Rigid shop vac!

Ignacio, look into Cimexa dust for bed bugs. Far superior to DE and still cheap. I have been a licensed exterminator for 27 years and while I don't do much bed bug work (by choice) when I do this is what I use.
by Tim Moore
Fri Nov 29, 2019 7:51 pm
Forum: Classifieds - Parts
Topic: unique split rim tool
Replies: 0
Views: 314

unique split rim tool

Don't think this went through....folding split rim tool with adjustable sizes with removable U shaped pin. Probably NOS and never appears to have been on a rim. No rust or bends and not the normal gear / crank type. Stamped steel with cast handle. Patent date 1925. Much lighter and cleaner. $100 plu...
by Tim Moore
Fri Nov 29, 2019 6:30 pm
Forum: Classifieds - Parts
Topic: 4 sale, unique govenor
Replies: 0
Views: 287

4 sale, unique govenor

No fly weights on the fan, no bent up linkage or throttle rods. Excellent aluminum case and everything is tight. The top knob lifts and twists to increase or lower spring tension that controls the butterfly in the intake. Never seen another and looks much better than all those rods and moving parts....
by Tim Moore
Sun Nov 10, 2019 8:49 pm
Forum: OT - Off topic
Topic: Caution - Rutting season has started
Replies: 27
Views: 2532

Re: Caution - Rutting season has started

Deer become what is called "crepuscular"" or active at dawn and dusk, some mammals are either nocturnal (active at night) or diurnal (active during the day) . Deer all over the page and crepuscular activity is triggered by many factors such as the breeding season but mostly by the amount of sunlight...
by Tim Moore
Tue Oct 29, 2019 9:45 pm
Forum: General Discussion Forum (started 2019)
Topic: New accessory item, GUESS
Replies: 43
Views: 3704

Re: New accessory item, GUESS

Yup I got it! I have a few so am out. I know lots of people who don't have one. What color? Good work again Tim!
by Tim Moore
Fri Oct 11, 2019 9:49 pm
Forum: General Discussion Forum (started 2019)
Topic: Any ideas about removing a stubborn wheel key?
Replies: 30
Views: 2305

Re: Any ideas about removing a stubborn wheel key?

I would never use heat in this area. If a sharp punch or chisel up the taper won't knock it loose I would drill lots of small holes down into the key that is soft. That will release the bond and let it collapse. No way I would ever heat anything around a rear axle red hot.
by Tim Moore
Sun Sep 08, 2019 9:06 pm
Forum: General Discussion Forum (started 2019)
Topic: Failure
Replies: 18
Views: 2347

Re: Failure

A trophy is just plastic, I got over it years ago and threw them away. I can buy any trophy on eBay that I want and be the best at everything.
by Tim Moore
Sat Aug 31, 2019 5:53 pm
Forum: General Discussion Forum (started 2019)
Topic: New pre 1920 Screwdrivers
Replies: 24
Views: 2269

Re: New pre 1920 Screwdrivers

If I was to make a guess as to the wood handle I would go with spoke material. It would seem logical that Ford would use what they had lots of scrap on hand.
by Tim Moore
Fri Aug 16, 2019 8:44 pm
Forum: General Discussion Forum (started 2019)
Topic: For Those Who Make Their Own Penetrant...
Replies: 6
Views: 1094

Re: For Those Who Make Their Own Penetrant...

A short story; last fall I was rear ended in my Blazer at a stop sign after just getting rear ended in my Chevy Silverado at a stop sign by 2 separate idiots on cell phones. I put a hitch in both vehicles so the next one would take out their radiator. The Blazer got the good hitch with the 4" drop (...
by Tim Moore
Sun Aug 11, 2019 9:32 pm
Forum: General Discussion Forum (started 2019)
Topic: Himico Cylinder Head
Replies: 15
Views: 2384

Re: Himico Cylinder Head

The HIMICO motor I had was complete except for the lost shift plate. The head was marked AC.
by Tim Moore
Thu Aug 01, 2019 8:33 pm
Forum: OT - Off topic
Topic: Two Piece Lug Nuts on Modern Vehicles
Replies: 13
Views: 1369

Re: Two Piece Lug Nuts on Modern Vehicles

Just went through this doing brakes on my son's jeep 2 weekends ago. Spun the metal caps, chiseled them off, rounded lug nuts. Got off 9 of 10 then was stuck. Torch in the center of the last one and burned the stud and nut out. Luckily didn't burn the wheel with the sunken lug nut. Threw all that ju...
by Tim Moore
Sat Jul 27, 2019 9:56 pm
Forum: General Discussion Forum (started 2019)
Topic: Have you had a drum failure ? POLL
Replies: 47
Views: 3289

Re: Have you had a drum failure ? POLL

Funny stuff to read here year after year. Dance with the devil and pay the price. There is an obvious conclusion regarding kevlar that has been known for many years. It is "bullet proof" and used for helmets and vests but in a model t transmission not a wise choice. Regardless of adjustment or drivi...
by Tim Moore
Sun Feb 10, 2019 10:00 pm
Forum: General Discussion Forum (started 2019)
Topic: OT period whatizit?
Replies: 11
Views: 1752

Re: OT period whatizit?

Not really a razor but a razor sharpener. It flips the blade back and forth on each stroke to sharpen both edges.
Tim Moore
by Tim Moore
Wed Feb 06, 2019 8:30 pm
Forum: General Discussion Forum (started 2019)
Topic: FJ - How to keep your trailer from being stolen
Replies: 28
Views: 3524

Re: FJ - How to keep your trailer from being stolen

FJ, I like your target poster and the gun image but everybody does that and criminals have guns also. I had an uncle in Southern CA who owned a sign company and at the front of his ranch he had a sign with an image of a coiled rattle snake and it read "Warning, experimental rattle snake farm". Nobod...
by Tim Moore
Wed Jan 23, 2019 9:29 pm
Forum: OT - Off topic
Topic: OT - Ford Tractor (1) old man (0)
Replies: 45
Views: 6322

Re: OT - Ford Tractor (1) old man (0)

Ted, if that was the case to get a new tractor with a safety switch we should all sell our Model T's and get cars with air bags and seat belts! We are a group who likes a previous generation of equipment but along with that comes some risks. This is a good post of what was common and what can happen...
by Tim Moore
Wed Jan 23, 2019 6:23 pm
Forum: OT - Off topic
Topic: OT - Ford Tractor (1) old man (0)
Replies: 45
Views: 6322

Re: OT - Ford Tractor (1) old man (0)

Holy crap Tim that is scary. I plow with the same tractor and blade and am surprised it stalled and didn't just sit and spin or go right over the fence. I also learned that when going backwards on those tractors you have to be sure to keep your feet well inside on the running boards. About a year ag...
by Tim Moore
Thu Jan 17, 2019 8:31 pm
Forum: General Discussion Forum (started 2019)
Topic: Differential oil leak
Replies: 8
Views: 1504

Re: Differential oil leak

This doesn't sound right to me if you were able to place a "shim" (?) 1" long between the halves and seal the outside of it. One side has a ridge and the other has a recess and they should fit together tight. From what I read, the halves are not engaged together properly. If this is true one half co...
by Tim Moore
Mon Jan 07, 2019 8:34 pm
Forum: General Discussion Forum (started 2019)
Topic: Race Car Project
Replies: 69
Views: 6855

Re: Race Car Project

I am afraid one big bump on a turn or a curb and the axle will fold over to the side.

Tim Moore
by Tim Moore
Mon Jan 07, 2019 8:29 pm
Forum: General Discussion Forum (started 2019)
Topic: Race Car Project
Replies: 69
Views: 6855

Re: Race Car Project

I am concerned with your front lowering system as it is like a step ladder with no steps. That is a big drop and even if the welds hold there will be constant stress with each bump and turn. Eventually it may fold over left or right. You could plate or box the lowering bracket in the rear or both fr...
by Tim Moore
Sun Jan 06, 2019 9:42 pm
Forum: General Discussion Forum (started 2019)
Topic: Frank Van Ekeran. Are you OK?
Replies: 6
Views: 1218

Re: Frank Van Ekeran. Are you OK?

He e-mailed me 24 hours ago and did not mention any problems.

Tim Moore
by Tim Moore
Sun Jan 06, 2019 9:07 pm
Forum: Forum Support Questions
Topic: test photo
Replies: 4
Views: 675

Re: test photo

P6200015.JPG
Old photo's, just playing around.
by Tim Moore
Sun Jan 06, 2019 8:58 pm
Forum: Forum Support Questions
Topic: test photo
Replies: 4
Views: 675

Re: test photo

P1010088.JPG
by Tim Moore
Sun Jan 06, 2019 8:56 pm
Forum: Forum Support Questions
Topic: test photo
Replies: 4
Views: 675

Re: test photo

P6200014.JPG
by Tim Moore
Sun Jan 06, 2019 8:53 pm
Forum: Forum Support Questions
Topic: test photo
Replies: 4
Views: 675

test photo

IM001044.JPG