MTFCA Forum

Good morning Jeffrey, I'm interested in Your dog bone.
Please send paypal .
Thanks
Steve Meudt

Hello Melba, I'm interested in Your petcock tool. Please advise payment plan.
Thanks

Steve Meudt

Hi Allen, put me down As a buyer !! Please send me payment information.
Steve Meudt

Hi Rodger, il take a flat rate quantity worth of each the 12/24 and the sheet metal screws. Please let me know the total price and type of payment You prefere
Thanks
Steve Meudt

Hi Mike, I sent You an email .

Steve

Hi Jay, I would like To purchase Your gas tank gauge. Would You like the same Paypal payment as my last purchase ?

Thanks

Steve Meudt

Thanks Folks for Your reply's. I should have been more specific on type application. I have different types of coils I would like to replace the points with good used points. However the rivets on some of the points have collapsed rivets which I would like to "save". I'll try McMaster Carr.

Wtb, looking to purchase cushion spring rivets. Does anybody know where i can find these special rivets ?
Thanks
Steve Meudt

Hi Karl, Thank You for Your reply !! Frank Brandi of Moline IL. sent me a picture from Steve Jelf that depicted a great solution to my tool box project that i am probably going to use. Again, Thank You !!

Stay in touch !!

Steve Meudt

Wtb
Poor condition luggage rack with good mounting brackets . I plan to reuse the brackets on a running board tool box.
Thanks
Steve Meudt

Hi Scott, I would like to purchase Your auxiliary springs. Please send payment preferences.
Thank You
Steve Meudt

Hello Don, If You do decide to split the two pullers, I would be interested in the 5 Z 326.

Thanks

Steve Meudt

Ok, Thanks Karl

Hi Karl, I noticed an oil pan in the hogs head pike. Would You happen to have a "narrow tapered" usable oil pan ?
Thanks
Steve Meudt

Hi Jack, put me down for one of Your frames. Please let me know when they re available.
Thank You
Steve Meudt

Hi Jack, I'm checking in to see when You may another Steven's frame tool available again.
Thanks
Steve Meudt

[url][/url]Wtb, choke lever for a 1913 Kingston "4" Ball Model Y Carburetor.
Steve Meudt

[url][/url]Wtb, choke lever for a 1913 Kingston "4" Ball Model Y Carburetor.
Steve Meudt

[url][/url]Wtb, choke lever for a 1913 Kingston "4" Ball Model Y Carburetor.
Steve Meudt

Hi Karl, I'm interested in Your spark plugs. Let me know Your preferred payment and address.
Thanks

Steve Meudt

Hey Bob and Allan, this is great advice. I'll be starting on the top project next week. I'll set the bows up as You advised !!

Thanks
Steve

Thank You Wayne , the more information I get lessens the chance of a faulty installation !!! I appreciate Your reply to my delema!!
Steve

Hi Allen and William, Thank you for Your replies! I will be getting into my project next week with Your advice. Wish me luck ! William, as I get going I may confer with Ya to see how You are doing on Your '12

Gratefully Yours

Steve

Good evening Folks of MTFC My project involves a 1913 Model T Touring top assembly for which I am in need of dimensions. After reviewing the past discussions (and diagrams) on this topic ,I would like to confirm some information. #1 bow extends from the socket 6 3/4" # 2 bow 6 1/2" #3 bow 9" #4 bow ...

To all You kind Folks who took the time to help me out with Your helpful wisdom, your advice will be used faithfully!!! Times like these makes being a member of MTFCA a great asset!!

Many Thanks!!!!

Steve Meudt

Good Morning MTFCA ! I would like verifications on the following dimensions on installing a top on the 1914 Roadster. I understand that the center bow needs to be 25" between the bow and the back of the windshield. Currently the measurements I have are 24" with the center bow "plumb" with the car. S...

Dear Bob, May I offer my sincerest condolences to You on Your loss.
best regards,
Steve Meudt

WTB 1914 Combination Oil Lamp and License Plate Bracket

Hello Daniel, I'll be interested in a set of Your reamer/tap set

Hello, I would like to buy Your bead breaker tool. Please provide payment information
Thank You
Steve Meudt

Hi Jack, yes....please put me down as interested in your Steven's Tool. Let me know when You may have another" run" .
Thank You

Steve Meudt

HELLO, By chance do you happen to still have Your 1914 roadster door ?

Thanks

Steve

Thanks Mike, that would make sense considering "in the day" They used lead for body fillers (no plastic fillers then)

One last question, what type of material was used to fill in the screws ?

Thanks Russ and Art for Your replies. I am going to try and replicate the moldings on Russ's '14 . Still hoping to find a "set" that is" pre-molded". Great pictures Guys !

Steve

Thanks John and Steve for Your help !! Ill check out both ideas

Hi Mike, Thank You for Your reply. Yes You would be right on the description of the moldings. I was hoping to find set so as not go through the headache of trying to manufacture. I will have to learn how to be a Blacksmith !! LOL

Hi Walter, I would like to purchase Your wheel puller.

Thanks

Steve

WTB Outside body moldings for a 1914 Ford Model T Roadster. These moldings mount on the back of the body and "curl" down following the lines of the turtle deck just below the deck. The moldingd appear to be solid steel and mounted on the body via screws. any help would be greatly appeciated

WTB Outside body moldings that would go on the back of the body then "curl" down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these "moldings" appear to be solid steel that got mounted via screws. Any help would be appreciated !

Sorry, I should have been more vigilant !

Hello Mr Schweck, I would be interested in Your license plates. Please send pictures and price with delivery charges to 53533.

Thank You
Steve Meudt

Hi Rodger, I'm interested in the 4lb. Deal...please send me the price for shipping to 53533.

Good morning, I would like to purchase Your spindle set. Please payment information.
Thanks

Steve Meudt

Hello Walt, Iwould like to buy y
This tool

Thank You

Steve Meudt

Hi Bob, I would to buy all three tubes.
Please send me Your choice of payment.

Steve Meudt

Hi Bill, I would like to buy Your suspenders.

Steve

Hi Bob, Let me know if You have any left over pack nuts after Rich's purchase.

Thanks

Steve

Hi Terry, Would You be interested in selling Your salvaged tubes and stems w/ hdwre ?

Steve

Thanks Mark,
Appreciate the lead !!
Steve

Hello Scott, please put me down next in line for Your puller tool .

Thank You
Steve Meudt

Maybe try Bob's Antque Auto Parts in Loves Park, Ill....I know He used to have one of those gasket boards...

Hello Melba,
Could You send more pictures of the 9/14 floor mat.....I assume this mat has no defects ?

Thanks

Steve Meudt

Hi Scott, Please let me know Your total price with shipping for one assembly and how You would like payment.

Thanks, Steve Meudt

Search found 54 matches