MTFCA Forum

Mark, are the Differential case's still available?
And, will it fit a 1922 axle housing? I'm asking because my worn out case's use the three separate bolt's and nuts instead of the stud bolts and nut as shown? I'm guessing their different years, but are they interchangeable?

When you talked to Snyder’s was the capacitor size discussed? The gal acted like she didn't know there was a difference. I've since received the replacement coil from them....it has the same 684K 630V yellow capacitor. I've taken the liberty to replace this yellow capacitor with one of their orange...

Just a FYI, Snyder's is sending me another new coil in exchange for the first one received. I doubt if it's a better quality unit, but who knows? So, thanks to them. I've also sent off my 4 older coils to Brent Mize for rebuilding. I may still need to use that new coil IF one of the old ones is foun...

Tim Moore wrote: ↑

Tue Dec 07, 2021 12:31 pm

When you secure the new component I strongly advise you do not use expanding foam. I have seen this done and coils can swell and no longer fit in the coil box.

Tim Moore

So the tar works better......where do you get it?

This morning I cut the yellow capacitors out of the 4 new coils that tested bad, soldered in the correct orange ones, then tested on my ECCT and they all registered “excellent”. I find it really odd that Snyder’s sells these new coils with incorrect capacitors yet they sell the correct capacitors i...

Just to see what was in the new wood box coil I purchased; I opened the case......it looks exactly like the photo MichaelPawelek posted. The same yellow capacitor with markings of 684K, 630V. https://i.postimg.cc/d1z4vq3N/Coil-7.jpg https://i.postimg.cc/50HnZH4F/Coil-8.jpg Forgive me if I don't unde...

Thanks for the replies fellows! I bought this '22 T at an estate auction, which from the looks of things hadn't been run in years. The magneto doesn't seem to work so my only hope of getting it to run is with the 6V side. I had it running for a short time.....enough to see the generator was producin...

The three older coils don't spark....they buzz, but no sign of sparking like this new coil does. Last night it was a nice night to work around here, the spark coming off of the top of the new coil was significant! Could it be since I didn't have the spark plug attached to the coil, the energy was re...

The new coil is from Snyder's...their new wood boxed version.

I purchased a single new coil recently and put it into the number one piston position in the box to help set the timing. I'm noticing as I set the timing at ATDC the points on the coil are sparking, as well as the typical buzzing of the points. Is there something wrong with the new coil to be arcing...