MTFCA Forum

Gas gauge has found a new home! Thanks MTFCA !!! Walt Wise

1912 Patent Pending Motor Specialties Co. MFRS(MOSCO) gas gauge made for Model T, Waltham, Mass., USA. As you can see in the pics, the gauge works off a cork float that goes up/down in your tank to register on the top cap dial how many gallons of gas you have in your tank. The cork has a chip missin...

FOUND! Thanks MTFCA!!! Walt Wise

So many ads right now?!!! So back to the tippy top!

Still looking, but call me cheap, I am not willing to pay double the price for one, so I may be just waiting until Langs gets some in...

Although I haven't gotten payment yet, too many people are responding wanting this, so consider the parts lot SOLD. Makes me wish I would have asked for more, but I price stuff to attempt to sell it fast and get it out of my way!

Thanks MTFCA!!!

Walt Wise

Does anyone have a Holley G venturi that they would sell and if so, how much? I am assuming there must be someone somewhere that probably makes them for all the vendors since they all seem to be out - at least all I have contacted. PLEASE respond here, shoot me an email, or PM me. Much Thanks for lo...

I have several parts here that I know I will never use, so I have grouped them all together here to sell. We have two battery ground cables, one positive(red) cable about 30”, one battery clamp, 26-27 emergency brake quadrant, four drag link caps, one T gas tank cap, one brass winged cap(?), dash pa...

Carb has found a new home! Thanks MTFCA !!! Walt Wise

I have a Brass Kingston L4 carburetor for sale that I bought in a parts lot getting something else I needed. I have taken it apart, cleaned it, new choke spring, new inlet elbow, and obviously a new gasket set. I test ran it on Saturday as you can see in one of my pics – well you can’t see it runnin...

Band linings have found a new home! Thanks MTFCA !!! Walt Wise

Okay y'all, I am beginning to feel like an idiot. I paid $75 for these when I was told by two vendors they were going to be out of stock soon with no more coming in. Langs, Smith and Jones, and Macs don't have any now. So...back to the tippy top!

Okay y'all(as we say in the south), these need to find a new home! So...back to the top!!!

I added this to the top original post, but maybe some of you didn't see it: "The bands measure about 23 and 1/8 inches on one and a tad more on the other two(about 23 and 1/4inches) and are somewhat rigid from being packed in the box. If your installation method is soaking them in oil overnight to s...

I have a new set of Scandinavia transmission band linings for 26-27 cars with rivets in the original box. Since I sold my 26 Coupe, I no longer have the use for these. The bands measure about 23 and 1/8 inches on one and a tad more on the other two(about 23 and 1/4inches) and are somewhat rigid from...

The 26 Coupe has found a new home!!! Now I can focus all my time/energy on my recent 22 Coupe purchase - the car I wanted in the first place! Much Thanks to the MTFCA and specifically Ms. Susan Yaeger and Jeff Stevenson for their help!!! Walt Wise

Mr. Russell, I sent you an email through this website. Sometimes I understand they may go to your SPAM folder, so look there if it isn't in your Inbox. Much Thanks for responding!!! Walt Wise, Atlanta, GA

Much Thanks for the kind observations/words Mr. Gumbinger, Mr. Jarzabek, and Mr. Hank!!! I think this is a very solid car and worth every penny of the $7500, so I hope someone else in the purchase market agrees! Thanks to all!!! Walt Wise, Atlanta, GA

Mr. Adcock, I just sent you an email with my contact info. I just don't feel comfortable posting it here where everyone in the world could see it if they wanted to,,, Much Thanks for responding!!! Walt Wise

I am not a photographer, so if anyone needs a specific picture of something, let me know and I will attempt to provide that. Also, PLEASE let me know if you have any questions and I will attempt to answer anything I know about as honestly as I can - the ONLY way I roll! Much Thanks !!! Walt Wise

I am selling my 26 Coupe that I bought on 12-8-2016, when I settled on it because I had searched for an older suicide door Coupe for a year and couldn’t find the right one for me. Now that I have my 22 Coupe, the 26 Coupe needs to find a new home. As usual with old cars, I have spent way more on the...

Shackles have found a new home! Thanks MTFCA !!! Walt Wise

These are some really nice original Ford script shackles in my opinion, except for one pitted castle nut as shown in the pics, so back to the top!

Shackles set #2, have found a new home! Much Thanks MTFCA !!! Walt Wise

I have a front set of used original Ford script U shackles with Ford script plates, no castle nuts, that I bought for my 26 Coupe that I did not use since they were good already. In my opinion, they have no significant wear, so along with new bushings in your perches and springs, they should last yo...

I have a front set of used original Ford script U shackles with Ford script plates and castle nuts that I removed from my Coupe I bought a couple of months ago that I replaced with the correct year shackle. In my opinion, they have no significant wear, so along with new bushings in your perches and ...

Plugs have found a new home! Thanks MTFCA !!! Walt Wise

I have four "gently" used Champion X plugs that I removed from my Coupe I bought a couple of months ago. I say gently, since they almost look new. I attached three pics to hopefully show you their condition. I know that some of you like old original boxes, so I have four of them in somewhat decent s...

Timer has found a new home! Thanks MTFCA !!! Walt Wise

I believe this to be a Tiger Timer that was taken off a running car, complete with all parts. It looks to me to be in excellent condition with very little wear. I am asking $28 that includes shipping to any of the lower 48 contiguous US states only. I prefer Paypal using the friends and family optio...

Perches have found a new home! Thanks MTFCA !!! Walt Wise

Okay...lower price - $38 shipping included!!! Y'all, these are ready to bolt on as is or I can paint them black for you. These need a new home! Basically, I am asking $15 each since me paying shipping is over eight dollars. Thanks for looking!!! Walt Wise

Two rear spring perches with new bushings already installed along with flip top oilers, plus two spare bushings for you to install in your leaf springs. There is a very small “chip” off the left pictured perch shown on pics #2 and #3, but there is no compromise there in my opinion. It is not cracked...

Wiring harnesses have found a new home! Thanks MTFCA !!! Walt Wise

Mr. Marcheese, I sent you an email. PLEASE check your SPAM folder as well if you don't see the email in your "regular" Inbox. Much Thanks !!!

Walt Wise

Hood Pins have found a new home! Thanks MTFCA !!! Walt Wise

Mr John, I sent you an email through this system. Sometimes they go to your SPAM Inbox if you don't see it in your "regular" Inbox. Let me know!

Much Thanks !!!

Walt Wise

Brand new, three stainless steel hood hinge rods for 26-27 hood for sale. I am asking $22 that includes shipping to any of the lower 48 contiguous US states only. I prefer Paypal using the friends and family option and not using a credit card(since I won’t get the full $22) or a check will work too....

Brand new in the bag wiring harnesses for sale for 19-25 cars. This is the communicator T5031(right side seven wire with lights) and the lighting T5041(left side five wire with lights). From the vendors, these cost $60 or more plus shipping. I am asking $48 with shipping included to any of the lower...

Sediment bulb has found a new home. Thanks MTFCA !!! Walt Wise

Mr. Rick,

I sent you an email a couple of hours ago with how to pay using Paypal. PLEASE check your "regular" Inbox or possibly your SPAM folder. Guys are lining up behind you for the sediment bulb! If I would have thought it would be this popular, I would have asked more!

Thanks !!!

Walt Wise

Mr. Scott, thanks for the kind words, but I will probably be six feet under before I become an "old hand" at this stuff! I will say, spending literally hours searching old posts here, helps me out a lot to find out how to accomplish something!!! Hope you as well as everyone is safe, healthy, virus f...

Pending, awaiting funds...

Will update later!

Walt Wise

Mr. Butterworth, I sent you an email through this site. If you don't see it in your "regular" Inbox, it may be in the SPAM inbox. Let me know if you don't get it! Much Thanks !!! Walt Wise

Okay...let me give y'all a laugh, but I can't bring myself to throw almost 100 year old parts(has Ford script and part number) away if they still have been made to work, just not so "pretty". Here is my fix of a broken off sediment bulb arm. The bulb has been taken completely apart and cleaned, lapp...

I took this accessory steering wheel lock off my 22 Coupe, since I wanted it to be original. It is complete! It comes with the "lock body", the gear drive pinion which is essential to the operation of the lock, the three little gears(4:1), the three gear pins, and two working original keys. You can ...

Carb has found a new home! Thanks MTFCA !!! Walt Wise

Mr. Strange, sent you both a PM and an email earlier, so hopefully you get at least one of them?!!!

Let's get it to the top!

Mr. Hank, sent you a direct email since I had your address. Much Thanks !!! Walt Wise

I want to remove an accessory locking steering wheel setup and the steering drive pinion needs to stay with the accessory locking steering wheel "unit" to be sold all together. So...I need a 4:1 steering gear drive pinion. Don't really need the three little gears, but it you are wanting to sell your...

This carb was taken off a running car so I could install a brass Holley G carb that I had restored. It is ready to bolt to your car with a gasket on it and the brass elbow inlet as well. I am asking $38 that includes shipping to any of the lower 48 contiguous US states only. I prefer Paypal using th...

USPS tracking info if you don't see my email to you! 9505 5107 1081 0177 3574 80

Expected delivery day is this coming Monday. Much Thanks !!! Walt Wise

Spindle has found a new home! Thanks MTFCA !!! Walt Wise

Mr. Valdes,

I sent you an email at 5am this morning with Paypal info and requesting your mailing address. You might need to check your Spam folder because some of the emails from this site go to there.

Let me know...

Thanks !!!

Walt Wise

Are you getting my emails? I was so frantic at first not to miss out on something I wanted, I used the site email system first, but have forwarded those emails to the posted email address in the ad, but am now waiting to hear back?

Email sent! Thanks !!! Walt Wise

Let's try that again!

Thanks for filling me in guys!!! It is awesome to get an answer to your question! Much Thanks !!! Walt Wise

Since I finally acquired a suicide door Coupe(1922) after locating about 20 cars, I have not only seen several in person, but numerous more with pictures that sellers would send me. Please look at the two pictures below and if possible, inform me that they were possibly an "accessory" support rods f...

Back to the top!

I have just the single 26-27 excellent looking condition right front spindle for sale. It looks like NOS to me, but not positive. I am asking $40 that includes shipping to any of the lower 48 contiguous US states only. I prefer Paypal using the friends and family option and not using a credit card(s...

Plugs have found a new home! Thanks MTFCA !!!

Walt Wise

I think I am getting close here for answers to my questions, but forgot to ask how wide the board is that goes across the top of the tank to hold it down? Probably will make some of you laugh at me, but it sure won't be the first time...

Mr. Campbell, that picture is awesome!!! Exactly what I needed to see!!! I hope the 1922 would be the same bracket? I would think that it has to be close. Hopefully Mr. Seth can confirm? I have serious doubts that anyone would ever have one to sell, but sure would pay anyone that wants to fabricate ...

Oil can has found a new home! Much Thanks MTFCA!!!

Walt Wise

For sale is a Ford script oil can that has the "E" on the opposite side of the can from the Ford. The base is 3.5 inches and the height is 6 inches. It has one very tiny ding, but otherwise I think it is nice. I am asking $40 that includes shipping to any of the lower 48 contiguous US states only. I...

I have three "gently" used Champion 25 plugs that I will not use. I say gently, since they almost look new. I am asking $25 that includes shipping to any of the lower 48 contiguous US states only. I prefer Paypal using the friends and family option and not using a credit card(since I won’t get the f...

Awesome pics Mr. Rich E.!!!

Wow Mr. Rich E., you must be a draftsman! I believe you are correct and it isn't a hinge there, just a bent metal piece. Now I seem to think if someone had these brackets to sell, it would have to come only from a coupe, since it attaches to the underside of the turtle on the right side. Sedans that...

Mr. Rich E., I had blown-up your pictures here before I saw your post reply. Unless I am mistaken, the brackets in those two pics of yours look very different? One of them even looks like a hinge, where the thin wood board across the top of the tank could easily be bent up via the hinge, to remove t...

Mr. Rich E., much thanks for that reply and the additional pics. It looks like there is a "special" bracket on the right side(passenger side of vehicle) of the gas tank, then on the left it is just a steel rod, and then the thin board across the top of the tank holding it down. Until you added your ...

Even though I could make a similar bracket to hold down the square gas tank in my 22 Coupe like in the picture below, I would prefer to have an original bracket. I don't know if the bracket in sedans that used the square gas tank is the same or not? PLEASE let me know if you can help me!!! Much Than...

Sent you an email Mr. Seth. Much Thanks !!! Walt Wise

I have looked through several vendor catalogs and can not find any brackets they sell to secure/hold in place the square gas tank. I just bought a 22 Coupe and it currently has nothing to hold the tank in place besides the "square bottom bed" that has about a three to four inch sides. I have attache...

I have been "pinching" myself for a couple of days now since it still is hard for me to believe, but after a five year exhaustive search, on Wednesday past, I bought a 22 Coupe that I believe after some much needed TLC, since it has been in storage for quite some time, will make me very happy. I mus...

That was quick!!! The wrench has found a new home! Much Thanks MTFCA!!! Walt Wise

This is a wrench that I bought on this website a couple of years ago from someone whom I don’t remember. Anyway…when the envelope package was delivered by the USPS, this heavy wrench had burst through the envelope and I figured it was lost forever, so I bought one off Ebay. Well, a couple of weeks a...

Mr. Martin, In a one word answer, NO, but I believe I have found the car I want and have a "gentleman's agreement" to get it, just working out the timing. I can possibly point you in the direction of two cars that might interest you if you don't already know about them. The Model T Haven has both a ...

Mr. Hank,

No pictures of these? I am simply astounded by your awesome "works of art"!!! I am like Scott, I want to tour your shop, but hopefully his $1K will get me in too???

As I look at the pic closer now, which I should have done initially, I see the differences. I am sending you an email...

Are these for a tapered shaft or a straight shaft yoke ball?

Carb has found a new home. Thanks MTFCA!!! Walt Wise

Mr. Dowell, earlier I sent you an email and a PM, so hopefully you should get one of them? Walt Wise

I think this is a great deal! Back to the top!

As the picture shows, carburetor completely disassembled, cleaning all parts and all passages, new choke spring, new venturi, obviously new gasket set, polished and reseated needle, reconditioned spray needle, installed original brass elbow, with new mounting gasket, and ready to install on your car...

Carb has found a new home. Thanks MTFCA !!! Walt Wise

Okay...back to the top!

As the picture shows, carburetor completely disassembled, cleaning all parts and all passages, new choke spring, new venturi, obviously new gasket set, polished and reseated needle, reconditioned spray needle, installed original steel inlet elbow and nut, with new mounting gasket, and ready to insta...

Carb has found a new home. Thanks MTFCA!!! Walt Wise

Mr. Keith, thanks for the kind words. I thought at this price it would sell fast too. Maybe today???

As the picture shows, carburetor completely disassembled, cleaning all parts and all passages, new choke spring, new venturi, new float, obviously new gasket set, polished and reseated needle, reconditioned spray needle, installed original brass inlet elbow, with new mounting gasket, and ready to in...

Carburetor is spoken for and found a new home. Thanks MTFCA !!! Walt Wise

Carburetor completely disassembled cleaning all parts, cleaned all passages, new choke and throttle plates, new choke spring, polished and reseated needle, reconditioned spray needle, obviously new gasket set, primed/painted, with your choice of spray nozzle(20-25 years “T” or 26 “U” top with new un...

Rods have found a new home! Thanks MTFCA !!! Walt Wise

Three nice choke rods for sale that did not work out for what I bought them for with the following lengths: 13”, 13 and 3/8”, lastly 16”. Also, an unknown tool to me. Asking $25 with FREE shipping to any of the lower 48 contiguous US States only. Paypal preferred, using the Family and Friends option...

Well...what about $17 with shipping included???

No bites on this???

As you can see in the pictures, the brass winged cap had a symmetrical cut out in the top, but that has been filled in nicely with lead(I think, since not by me). This very heavy brass cap is 2.25 inches across in the pristine threaded area under the cap. Possibly a speedster gas cap very similar to...

Search found 172 matches