MTFCA Forum

3 dip or 4

Hey Phil if you like to co.e by and see my mercury just call its the yellow one I. Pictures above bring your mask and tape measure Robert@aaglassshop.com

Contact me at robertaweitzel@gmail.com

This is new in Box. 1990 bought . $100 plus shipping robertaweitzel@gmail.com

Used $40 plus shipping robertaweitzel@gmail.com

These i took out T engine that had model a crank 30 on pistons 292. New with rings rods are 20. This was never ran. Have little surface rust. This came out engine that was done in the 80s. That never got run $350 plus shipping
robertaweitzel@gmail.com.

Needs sodered together 75 plus shipping robertaweitzel@gmail.com

These have been modified to accept later bearings they have races with some bearings

$ 275 includes usa shipping. Robertaweitzel@gmail.com

Send me email i have a new one robertaweitzel@gmail.com

Talk to kim dobbins he has one i beliveve

Sold pending payment

this is a reproduction done in the 1990s new in box same with timing cover$850 flate rate usa shipping included

robertaweitzel@gmail.com

Thanks mtfca sold pending payment

Thanks mtfca sold pending payment

e and j 466 fronts and all rest e and J $1800 plus shipping
4 new rear could use polish robertaweitzel@gmail.com

this is a drive line shortened to use with a warford i have radius rods ill throw in $250 plus shipping robertaweitzel@gmail.com

Ill Take these Robertaweitzel@gmail.com send paypal address thru email

if you take $600.00 I'll take it

Set 26 27 wire wheel hubs one of fronts they welded stud. No rear brake drums you can redrill your wood ones $350 plus shipping flate rate robertaweitzel@gmail.com.

1914 my 1st build

the merc

wc2. After its 1st hillclimb win you can tell it was exausted

Chris Egsgaurds. Copy frontless

the car with the legendary Fast Frank And Humble howard

Here is a picture atlas i believe

Contact via email.I"m helping a friend out! robertaweitzel@gmail.com

Putting it together

Ill take it kim talk to you soon robertaweitzel@gmail.com

I have 4 sets just sold one recently

Ill Take them all

Last set i seen went 3yrs ago for $1200. At bakersfield

looking for black tires 30 by 3. For a project robertaweitzel@gmail.com

can i get the other deck lock robertaweitzel@gmail.com do you have paypal

Have pictures email me. problems posting

Front hubs one needs stud rear hubs have good keyway. No drums $420 includes shipping usa only robertaweitzel@gmail.com

set of hubs no rear brake drums Keyways are good $400 To your door usa. Only robertaweitzel@gmail.com

DAN how do the swagelok compare to the a n. Fittings

Does anybody have a side shift trans lincolns had these in them robertaweitzel@gmail.com

This is replated comes with keys and 5 :1 gears this bowls outward so you really have room all works good really nice. $750 robertaweitzel@gmail.com

Sorry guys i know a few of you have been waiting for emails with pictues just got back in Town ill gettem to you tomorrow

Still avaliable

$21,000 w title i have lots pictures better to send me email robertaweitzel@gmail.com

I dont think this will last

Yes lets see it

Bakersfield is not canceled go to there page its to early to tell

I would definitly balance flywheel after doing removal of material and the magnets... We knife balance them

Erik barrwtt has some. he will be at chickasha

And acessory foot throttle how $

Hand brake acessory and aluminum neck fill tube how much both

Engine rebuilt. I have lots of pictures and yes i forgot how cool the orginal paint pinstripe is but its a little faded

21 k. Hit wrong price button

Erik Barrett is bringing to chickasha. Needs put together orginal body. Few things missing lots new parts. Email for more pictures robertaweitzel@gmail.com [image]

[/image]20k.

Ill be coming from tennesse

You better check low band knotch. Ive ran kevlars for years. I find if you have to ajust them more often than not its the knotch

My friend erik did the clutch. In this this is a quality car. Top knotch

that what he used fortunatly the ratio is 1.3 to 1

I have a skin if your intrested robertaweitzel@gmail .com

Don't forget about Jakes for ribs there bomb

Can i get a post of who is going to chickasha from california. I was wondering cause i may need some parts. transported..Buyer will contribute toward gas

Send me email robertaweitzel@gmail.com

Do you have any 1914 left and 1916 robertaweitzel@gmail.com

Nice job

Ill take one robertaweitzel@gmail.com

I have one been welded corners 200.00 and ill have delivered chickasha robertaweitzel@gmail.com

Bring one turlock have one sold for you John is his name he will be there he also has cores for you

U da man

Really guys. No tour just a swap meet what you think?

I've heard that the welding that orville did was crud now i know coarse he said all the welder in the 70s were crud welders

BTT. Reduced $ 600

Nice wheel bought some years ago has plantary gears with 5 to 1 , 1 key to unlock only dont know what other is $400 plus shipping robertaweitzel@gmail.com

I have few ill look

Electronic dist is sold

Sold thanks mtfca

Send me email

This was taken november 4th this year

I was just saying to Erik after rpm (needed to let both Howard ,And Frank see egsgaards faultless speedster run and with the mega phone that Howard reunited me with .. so off to murrietta we went. Ererybody asked where the wild cherry 2 was .For they did not know my intent or story behind this (caus...

Has both top and bttom glass .. BOTTOM GLASS will need to be glued IN its new HAS STATIONS WITH IT $450. Plus shipping robertaweitzel@gmail.com

You will need this if yoy have a rajio or gemsa or any head with 2 spark plugs per cyclinder Good used I

have 2 ones points ones electronic with extend shafts and propper gear which are sets. Bottom one is the electronic $ 200. Each plus shipping robertaweitzel@gmail.com

$20 for all

3 to choose froom $30 each Plus shipping robertaweitzel@gmail.com

Dan can i get 2. Robertaweitzel@gmail.com

Still on the hunt robertaweitzel@gmail.com

Better picture

Here is another to add to Kevin s. Portfolio. ReBuilr Relaced with new stainles spokes and powder coated

I thought this was t. Dont believe it is. Has 1 inch ball tje stering shaft is only 12 inch long I was going to use it but switched gears $250 plus shipping robertaweitzel@gmail.com 20191128_092846.jpg i 20191128_092846.jpg pp[achment=3]20191128_092846.jpg[/attachment] 20191128_092846.jpg

Give me call later today ive got this for u

Really like get rid all ass package

Plus shipping

Nice column bought didnt use. $500 ROBERTAWEITZEL@GMAIL.COM

Ttt blowing them out. Both fronts and rears have had bead repairs thats why cheap. 2 approns. Right front passenger fender both reAr fenders Cheap. $550 plus shipping

Send me email robertaweitzel@gmail.com

Spings only $100 plus shipping robertaweitzel@gmail.com

SOLD THANKS MTFCA

picture all five same been sitting since the 80s

I have a set of 5 Red 19 inch orginal buffalos with chrome rings with nos new zealand firestone tires these have the raised letters tires already mounted with hubs, knocks offs are so so mixed up $6500.00 plus freight robertaweitzel@gmail.com send email for pictures

I dont know what happened to my post but. Left fender sold and running boards sold b4 pictures price reduced to $650. Plus shipping these all have issues but can be worked with

Ok joe ill take it robertaweitzel@gmail.com

Price reduced sold running boards and left fender $600.

have fenders front rear and aprons and running boards package $850 plus shipping will seprate robertaweitzel@gmail.com

Sometimes its just easier to find a better steering column if thats the problem.The hard part is dropping out the bottom of car or pulling to inside and taking out. I have a car lift so its easy

NIce job love the intake.I would get it running drive it for couple years then paint it posssibly, things change

Search found 206 matches