MTFCA Forum

Still for sale.....

Is there anywhere you can find the collection including the results? Can someone post the link? Thanks. (I looked and looked, but I couldn't find it, butts I not smartz on compukers.)

Still for sale

Still for sale

Still for sale

Still for sale.......

More photos.....

This large Rubes 3/4 twist horn is about 10" tall and is about 6" wide. This is the style with the large bell and rim. It can be used on a right or left-hand early automobile. The original tubing is about 40" long. It's in great condition. Complete with the thumb nuts, screen, adapters, reed, etc. H...

Still for sale

Still for sale...

Still for sale.....

This Klaxon horn is about 11" long, 6" tall and 4" wide. It has the mounting bracket and a nice original Klaxon plate. Really nice original and blows LOUD! Price is 185.00 including FedEx Ground shipping with insurance in the USA. I don't check messages here but call me at 734-730-4274 or email me d...

Thanks Scott. I appreciate and respect your answer and comments. Also, there should be "no comments" allowed for items that are posted are the For Sale or Wanted forums. Classified postings that are on MAFCA, MARC, Jalopy Journal, Ford Barn, HCCA, Prewar Car, etc do not allow people to comment on ei...

An accessory carburetor adapter. The bore is about 1.25" bore and C to C is 2 1/2" on the short side. The other side bore is a little smaller, about 1.125". Nice original condition. Price is 65.00 including FedEx shipping in the USA. Call me at 734-730-4274 or email directly at motoringicons@hotmail...

Still for sale.......

TWO original Bosch DU4 Magnetos. 5 1/2 × 6 1/2" and 15 pages. Descriptions, usage, settings, parts illustrations etc. Covers are loose but they are in very good original condition. The price is 60.00 EACH including shipping via FedEx Ground in the USA. Call me at 734-730-4274 or email me directly at...

More photos

Still for sale.

Price reduced to 195.00 including shipping in the USA

More photos.....

Here is a really nice group of early magneto literature. Includes: 6" by 9" Berling two manuals together for Type S and Type E-41 four cylinder, 28 pages, Kingston 6 pages, fold out, 3"x 7", European, 23 pages, 6" x 9" (I can't read it!), Two Simms 6"x 9" 12 and 16 pages and two larger blueprints fr...

Still for sale..

Still for sale.....

Sold!!!!!!!

SOLD to John V. That was fast!!!! Here are four, early Bosch manuals/parts books. Included: -Bosch Dual Ignition, 31 pages, 5 1/2" by 8 3/4" -Bosch DU4, 16 pages, 5 1/2 by 8 3/4" -Bosch D3, D4 and D6, 16 page, 5 1/2" by 8 3/4" (cover loose) -Bosch DU4, 23 pages, 3 1/2" by 8 3/4" (cover torn) A great...

Sold to Ed! Thanks.neat booklet for the 1920s Model T. 6" by 3". 22 pages. Lots of graphics including Fordson Tractors. Nice original condition. 35.00 including postage within the USA. Email me directly motoringicons@hotmail.com or call at 734-730-4274 Thank you.

Gonzo!!!!!!

Still for sale.....

Still for sale.....

https://www.ebay.com/itm/267294002958?_skw=1%2F4+x+18+tap&itmmeta=01K2WYPB1MRY4MBZKDD7AD6GTY&hash=item3e3bf6cf0e:g:uR4AAOSwS-poUYlt&itmprp=enc%3AAQAKAAAA0FkggFvd1GGDu0w3yXCmi1ftIjXssXjM%2Blf7RyjmCUvPl3k82qOJxh5fiQcFfzcAW%2BsQWIIlzkbHY6qXgiF3nx4UM41J3zWY2Y%2FYh26aHQooK1rFSJ9VxLV1Hj2gtzLbiU%2BozOVszIu...

I believe it would be both in order to work.

Yes, it works. Sounds like a mating duck. If you have any questions, please email at motoringicons@hotmail.com or call 734-730-4274 Thanks.

Still for sale.....

Still for sale.....

A large and early triple horn that is 11" tall and about 6" wide. It is made by SMA Le Cyrano, Paris. It is in excellent condition and an older restoration. It was clear coated years ago. This is a great brass horn that would date from about 1905 to 1911ish. It could be used for a larger American or...

..................

They can be used parallel to the frame for a race car, brass era car, etc.

Sold.........

Another photo....

Still for sale

You are absolutely right.

If you really want to sell the car, then sell it. If you don't want to sell the car, then keep it. It doesn't matter how long the next caretaker will keep the car.

More photos......

A rare pair of Hartford Shock Absorbers. Nice and clean original condition. Hartford brass adjustment emblems and the brass arrows are excellent. It has the mounting brackets. Great for an early race car, speedster, quality brass car, etc. 850.00. I don't check or here for messages but you can email...

Still for sale.....

Still for sale.....

Still for sale.....

More photos.....

Beep! Beep!

I'll never forget all of the years attending and selling at the LBMTC swap meets from Hamilton Bowl, Long Beach College parking lot, etc. As a kid, I remember riding on the back of Model T truck with the water tank that would drive around so to keep the dust down at the Hamilton Bowl. If my memory i...

Price reduced to 195.00 including shipping. A really neat, early, nickel-plated taillight. 5" x 5" x 5" . Red ruby lens with clear lens for the license plate. Opening the door with the clear lens to access the light bulb. Blade mount. Double socket. Excellent, original condition Great for a speedste...

Honk!!!!!!!

Neat Detroit history!

No. They do not have any removable lock rings. One piece rims just like a Model T but 26".I have a set of new Coker 34x4 but they are straight side.

Ok, I know this magneto has 2 more terminals for this crowd, but there might be an early six cylinder person that needs one. Brass base. Has the original Bosch bakelite knobs. Clockwise. Gives a good spark when you spin it. Good condition, complete, not tampered with, etc. A good magneto. Price is 4...

I doubt anything will happen, but it's worth asking!! I do have a Plan B!

I know these aren't for Model Ts, but, you never know....I need 34x4 or 35x4 1/2 CLINCHER tires for 26" wheels. Condition could be fair to excellent. I can use one to five. I don't want straight side, I have a new set of those . I could also trade the new straight side 34×4 set for a new set of 875x...

Price reduced to 125.00 including shipping within the USA.

Sold to Ed! Price reduced to 125.00 including shipping within the USA.

Price reduced to 150.00 shipping include shipping in the USA

Another photo....

Sold.......

Still for sale.......

Price reduced to 120.00 This horn measures about 10" long and about 5" in diameter. It is made by the Maxim Automobile Supply Mfg. Company in Brooklyn, New York. It has a brass bell, a three-hole mounting bracket and the original bakelite wire knobs. I would assume it would be from about 1913 to 191...

Sold to Ed. Thank you. Here is a nice Master Vibrator by the New York Coil Co. in New York. It measures about 3" by 3" by 6". Terminals Bat-Off-Mag. It says "Model T" under the key. Very nice condition and complete with the removable key and instructions under the lid. Price is 140.00 including ship...

Still for sale.....

Sold........

Still for sale.....

Sold to John!

...................

Price reduced to 150.00 including shipping via FedEx in the USA.

Price reduced to 150.00. Here is a neat, original automobile plate. Embossed tin. 3" by 13". Made for a car. " Detroit Automobile Club, Protected Inter-Insurance, AAA, Thieves Will Be Prosecuted " etc. The price is 200.00 including FedEx Ground including insurance in the USA. Call me directly at 734...

Sold........

Price reduced to 325.00 including shipping in the USA

Sold......

.................

Still for sale.....

For example.....

Sold to Don! Thank you! Price reduced to 195.00 including shipping in the USA. This reproduction brass spare tire mirror stands about 7" tall and the base is about 5" x 3 1/4". The glass mirror is beveled and is about 4" in diameter. The polished brass is heavy including the cast brass base. The mir...

Still for sale.....

.

..

..............

If a museum does not have money, they will need to sell some assets. Regarding Piquette-or other museums- they may need to sell assets. This could mean some employees will need to go. The main assets for any museum, are the collection(s). Unfortunately, Model Ts don't bring a lot of money, not even ...

I have a two-pedal. Much rarer. I purchased mine on April 1, 2024.

Sold to Galen

Still for sale.....

...............

What an outstanding car. I remember when you got this car. I was still at my parents home which was in the next town over from you. And I visited you often. It's hard to imagine it has been 40+ years. I was 18 years old when I bought my 1912 from Jay in Fullerton. It has been 40 years in my possessi...

Why not make it where the only person who can post to a thread is the original person who posted the ad? If someone has a question about the car they can send an email or a PM. That would put an end to what you are trying stop. I agree with Dan 100%. I think this should also be applied to the Parts...

SOLD! Thank you. A nice original 3/4 brass bulb horn. Marked "Standard". Excellent condition. No dents or cracks. Has a good original front screen, thumb screws, an extra mounting bracket, good reed, etc. Price is 245.00 including shipping via FedEx Ground in the USA. Call me at 734-730-4274 or emai...

If you want a car, buy it now. How long will you be dead?

Sold! A great Phares Auteroche acetylene/carbide all brass spotlight that would likely be for a pre-1912'ish automobile. This light measures overall 11" long, the diameter of 7" and has a depth of 6". This light has two acetylene/carbide gas tips with individual on/off valves attached. There is one ...

I was researching a car in the June 1961 Horseless Carriage Gazette. Found one of the great Asinine Alley pages from Ward Kimball. PS- You are still older than me, my old friend Peter!

Still for sale.....

....................

Glenn sold it!

Glenn sold it!! Here is a one of the desirable Stromberg OF Carburetors. This appears to be rebuilt and has not been used since. The price is 350.00. NOTE: I am advertising for a friend. His name is Glenn and his phone number is: 937 - 477 - 3298 or email at: glennchamilton46(at)gmail.com Call him d...

I have been a MTFCA member since I was 12 years old or since 1978. The Vintage Ford used to be great and was considered to be an important magazine. I would impatiently wait for each issue to arrive and the rest of the world would stop until the magazine was read. And it was read many times. The cov...

Bye bye bye

Sold to John. Thanks. Price reduced to 275.00 including shipping in the USA. A great brass era accessory that is often called a "Potato" horn. This is a brass horn that has its original nickel plated surface but it can be stripped back to brass. The mounting, conduit, etc are nickeled over brass as ...

Sold,.,.... .

Search found 452 matches