Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

9127 topics

Page 1 of 92
- Jump to page:
1
2
3
4
5
…
92
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by SparkTag « Mon Mar 01, 2021 10:51 am
Replies: 26
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB a complete stanchion either side---need ONE --advertise wind wing brackets, can have some rust but look like it has been in the or weather for several months greg adams ---beladams1@verizon net.

26 Replies

14487 Views

Last post by SparkTag
Mon Mar 01, 2021 10:51 am

Topics

Replies

Views

Last post

TT Truck rear axle literature

Last post by tmodeldriver « Tue Apr 13, 2021 12:11 am
Replies: 2
by tmodeldriver » Mon Apr 12, 2021 3:45 pm

First post

Does anybody out there in T Model country have a manual for the TT rear axle that you'd be willing to sell to me or make a
copy? I need to tear into mine and replace the gears (7 1/4:1 to 5 1/6:1). Some literature would help so I won't be totally winging it. Please send me a pm if you can help. Thank you. Bob

Last post

It's a standard rear end. Thanks for your reply. Bob

2 Replies

72 Views

Last post by tmodeldriver
Tue Apr 13, 2021 12:11 am
T snowmobile

Last post by Dan Protexter « Mon Apr 12, 2021 10:14 pm

by Dan Protexter » Mon Apr 12, 2021 10:14 pm

Looking for T snowmobile parts. What do you have.

0 Replies

62 Views

Last post by Dan Protexter
Mon Apr 12, 2021 10:14 pm
FS Aermore Big Four whistle

Last post by Modeltmike « Mon Apr 12, 2021 9:04 pm
Replies: 5
by Modeltmike » Sun Jan 24, 2021 11:10 am

First post

This came with an assortment of model t parts I purchased. I know very little about whistles. Happy to answer questions if I can. $85 plus US shipping. Thanks

Last post

I don’t have a thread gauge that big. The opening is just short of 1 1/4. The tubes are 1 1/8 diameter. The longest is about 13 inches the shortest about 6 3/4 inches.

Thanks

5 Replies

756 Views

Last post by Modeltmike
Mon Apr 12, 2021 9:04 pm
FS SUNDAY SWAP MEET

Last post by Mark Chaffin « Mon Apr 12, 2021 8:47 pm
Replies: 9
by Mark Chaffin » Sun Mar 14, 2021 3:37 pm

First post

Once again it is time for the Sunday Swap Meet. This week we have an assortment of mostly new items. Prices indicated are well below retail. Items are generally shipped USPO Priority Flat Rate. Combine items and realize a savings on shipping. Payment by PayPal (preferred) or by check for those not so inclined to use PayPal. First come first serve....

Last post

#21 and #33 sold to John. Thanks John! :)

9 Replies

695 Views

Last post by Mark Chaffin
Mon Apr 12, 2021 8:47 pm
Stromberg accessory carb choke control FS

Last post by Dropacent « Mon Apr 12, 2021 6:47 pm

by Dropacent » Mon Apr 12, 2021 6:47 pm

I have 5 of these ready to go. Latest and best design IMHO. Also , cheapest yet at $135 ppd to your door. Includes T column mounting strap for painless install. Tmorsher@icloud.com to reach me, please no PMs, or messages here to call you. No can do. No will do. 9AB775F4-22B8-4895-AE44-6539E457F16F.jpeg

0 Replies

88 Views

Last post by Dropacent
Mon Apr 12, 2021 6:47 pm
SUNDAY SWAP MEET

Last post by Mark Chaffin « Mon Apr 12, 2021 5:40 pm
Replies: 5
by Mark Chaffin » Sun Apr 11, 2021 2:04 pm

First post

Once again, time for the Sunday Swap Meet! Prices and shipping are as indicated below. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin (951) 805-0928

20210411_102745.jpg

1. Model T Jack Ford script $40.00 plus $15.50 shipping.
2. Taillight $30.00 plus $15.50 shipping. SOLD
3. Universal joint. Minimal wear. $40.00...

Last post

#2 and #13 sold to Bob. Thanks Bob! :)

5 Replies

549 Views

Last post by Mark Chaffin
Mon Apr 12, 2021 5:40 pm
TT Truck rear axle literature

Last post by Jeepbone1 « Mon Apr 12, 2021 4:57 pm
Replies: 4
by tmodeldriver » Mon Apr 12, 2021 3:55 pm

First post

Does anybody out there in T Model country have a manual for the TT rear axle that you'd be willing to sell or make a copy?

I need to tear into the axle of my truck and it would be nice to have some literature so I won't be totally winging it. :)

Please send me a pm if you have such a manual. Thank you. Bob

Last post

I sent an email and pm. Give me a call when you can.

Brad

4 Replies

93 Views

Last post by Jeepbone1
Mon Apr 12, 2021 4:57 pm
Speedometer gear F/S

Last post by Layden Butler « Mon Apr 12, 2021 4:49 pm

by Layden Butler » Mon Apr 12, 2021 4:49 pm

Nice gear with very minimal wear. $20, domestic postage included.

0 Replies

98 Views

Last post by Layden Butler
Mon Apr 12, 2021 4:49 pm
Wanted to trade 5 New Old Stock Shrader 777

Last post by CudaMan « Mon Apr 12, 2021 3:55 pm
Replies: 5
by DaveB » Sun Apr 11, 2021 5:14 pm

First post

I have five New Old Stock Shrader 777 valve Stems complete with all original hardware excellent storage and original plating

I am looking for 8 Champion brass top take apart Number 7 park plugs would like to trade the Shrader stems plus cash depending on condition of the plugs. I can send photos to your cell phone or email.Prefer calls 507...

Last post

Here are the pictures that Dave sent me showing the Schrader 777 stems he has for trade.

5 Replies

245 Views

Last post by CudaMan
Mon Apr 12, 2021 3:55 pm
Locate club member

Last post by CudaMan « Mon Apr 12, 2021 1:21 pm
Replies: 2
by T cruiser » Mon Apr 12, 2021 12:47 pm

First post

Want to locate Mike Davis . Thanks Ted 503 728 3476

Last post

Is this him?

2 Replies

177 Views

Last post by CudaMan
Mon Apr 12, 2021 1:21 pm
WTB NRS Parts

Last post by JvanMaanen « Mon Apr 12, 2021 1:13 pm

by JvanMaanen » Mon Apr 12, 2021 1:13 pm

I've posted this on the early ford site without luck, so thought I'd try here also. I need a few parts to complete my 08 SR.
Hood former, gas cap, radiator cap, timer cover and front spring shackles. I will be stopping by Tulare so could pickup there.

thanks Jim

0 Replies

106 Views

Last post by JvanMaanen
Mon Apr 12, 2021 1:13 pm
Model T 26-27 Standard Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

Last post by Mr. T Ford « Mon Apr 12, 2021 11:04 am

by Mr. T Ford » Mon Apr 12, 2021 11:04 am

Model T 26-27 Standard Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

0 Replies

120 Views

Last post by Mr. T Ford
Mon Apr 12, 2021 11:04 am
Model T 26-27 Pedestal Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

Last post by Mr. T Ford « Mon Apr 12, 2021 10:41 am

by Mr. T Ford » Mon Apr 12, 2021 10:41 am

Model T 26-27 Pedestal Head Light Buckets For Sale, $80 Or Best Reasonable Offer For The Pair.

0 Replies

101 Views

Last post by Mr. T Ford
Mon Apr 12, 2021 10:41 am
Bringing to Luray????

Last post by SparkTag « Mon Apr 12, 2021 9:38 am
Replies: 3
by Dan Hatch » Sat Apr 10, 2021 4:20 pm

First post

I am thinking about rebuilding a few bare front axles to bring to Luray. These will be without perches, blasted, straighten, Stevens inserts in repaired yokes and primed. Not going to do unless there is interest. Email me at address in pictures. Thanks Dan
16D07E4B-5482-49EC-807F-4A83A162C947.jpeg

Last post

Bringing 52-53 different tools as pictured on page 603 in Bruce McCalleys big book. sold as a lot ! ! Also several 6-8 5Z TOOLS Not pictured, but listed in his book. New totally restored Stan Howe-Montana OF carb. Boxes of Model parts, nice rear 27 rear fender ---NOT coupe/roadster. All kinds of T stuff.
sparktag in md.

3 Replies

360 Views

Last post by SparkTag
Mon Apr 12, 2021 9:38 am
FS early Mae West rear Shackle set plus bushing Price reduction

Last post by ThreePedalTapDancer « Mon Apr 12, 2021 9:23 am
Replies: 8
by Quickm007 » Thu Apr 08, 2021 9:43 am

First post

FS early May West rear Shackle set plus bushing. Please refer to the pictures bellow. They have some solder made by previous owner in the goal to fit well with bushing but they are in descent condition as well. . PayPal prefered. Thank you MTFCA.

Mae west.JPG Mae west 2.JPG

Last post

76528ACF-12CB-46BD-BC75-43515C7A529E.jpeg

8 Replies

483 Views

Last post by ThreePedalTapDancer
Mon Apr 12, 2021 9:23 am
FS new Rear shackle set, non-original style U-style

Last post by Quickm007 « Mon Apr 12, 2021 9:12 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 9:35 am

First post

FS new Rear shackle set, non-original style U-style. Never used. $20 for the set plus Shipping. PayPal prefered. Thank you MTFCA

New shackel set.JPG New shackel set 2.JPG

Last post

New set never used only $20 plus shipping.

1 Replies

127 Views

Last post by Quickm007
Mon Apr 12, 2021 9:12 am
Very Very nice Running board luggage rack FS

Last post by Quickm007 « Mon Apr 12, 2021 9:08 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 9:28 am

First post

Hi I'm selling a Very nice Running board luggage rack. $45 or BO plus shipping. PayPal prefered. Thank you MTFCA.
rack.JPG

Last post

Price dropped at $40 plus shipping. Very good shape as well

1 Replies

269 Views

Last post by Quickm007
Mon Apr 12, 2021 9:08 am
FS 1909-1912 Cast Aluminum hood handles

Last post by Quickm007 « Mon Apr 12, 2021 9:06 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 10:53 am

First post

FS 1909-1912 Cast Aluminum hood handles new repro never used. $20 plus shipping.

Hood Handle 1911.JPG

Last post

BTT, also include 2 alumium new rivets as demo

1 Replies

157 Views

Last post by Quickm007
Mon Apr 12, 2021 9:06 am
FS complete "Ford Faithful" Ouside Oiler Kit $40 rebates

Last post by Quickm007 « Mon Apr 12, 2021 9:04 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 9:52 am

First post

FS complete Ford Faithful Ouside Oiler Kit. This is a reproduction of the original “Ford Faithful Oiling System” that was offered to Model T owners from 1911 through the twenties. No modifications to your original engine are needed, no holes need to be drilled. I used one time only and decided to go with different path.

Comming with:
“Ford...

Last post

$40 rebates. New price is $55 plus shipping

1 Replies

295 Views

Last post by Quickm007
Mon Apr 12, 2021 9:04 am
FS Kingston Carb L4 55% rebates

Last post by Quickm007 « Mon Apr 12, 2021 8:59 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 11:02 am

First post

[size=1 Kingston Carb L4.JPG Kingston Carb L4 A.JPG Kingston Carb L4 B.JPG Kingston Carb L4 C.JPG 50]FS Kingston Carb L4. Asking 75$ or BO plus shipping.

Last post

55% off, Now price dropped to $35 plus shipping

1 Replies

163 Views

Last post by Quickm007
Mon Apr 12, 2021 8:59 am
FS Kingston Carb L (1915-16) 50% rebates

Last post by Quickm007 « Mon Apr 12, 2021 8:53 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 11:06 am

First post

FS Kingston Carb L (1915-16), asking $80 or BO plus shipping

Kingston Carb L.JPG Kingston Carb L A.JPG Kingston Carb L B.JPG Kingston Carb L C.JPG

Last post

Price dropped by 50%. Now at $40 plus shipping

1 Replies

159 Views

Last post by Quickm007
Mon Apr 12, 2021 8:53 am
FS Early Side light brackets Price dropped! $20 OFF

Last post by Quickm007 « Mon Apr 12, 2021 8:51 am
Replies: 1
by Quickm007 » Thu Apr 08, 2021 10:01 am

First post

FS Early Side light brackets, they are new and Excellent Reproduction. Asking $50 or BO for the pair plus shipping. PayPal prefered. Thank you MTFCA.
light braket.JPG light braket 2.JPG

Last post

Dropped price at $30 plus shipping

1 Replies

189 Views

Last post by Quickm007
Mon Apr 12, 2021 8:51 am
FS Tulare ("Bakersfield") Swap meet Pre Sale Aux Transmission, Engine Blocks, Disk Wheels

Last post by Allan « Mon Apr 12, 2021 5:06 am
Replies: 15
by Matt in California » Mon Mar 22, 2021 1:07 pm

First post

Time to clean up and make space!!! I will be in Tulare on May 1st at Space I-16.

I have a bunch of stuff and only a van. I am looking to presell as much as I can, so I know what to bring. I don't intend to ship this stuff. If you want it and don't plan to go to Tulare you will need to arrange pickup with someone who is.

I will update this top...

Last post

Email also sent re 1915 block.
Allan from down under.

15 Replies

744 Views

Last post by Allan
Mon Apr 12, 2021 5:06 am
model t babbitt groover tool?

Last post by donald4ham « Mon Apr 12, 2021 12:06 am
Replies: 1
by donald4ham » Mon Apr 12, 2021 12:01 am

First post

Any one recognize this tool? looks like a tool for cutting oil grooves, but that just my guess. Tha shaft opens the two cutters wider as it is cranked into the head piece.

Last post

this should have been posted to the forum, my error

1 Replies

190 Views

Last post by donald4ham
Mon Apr 12, 2021 12:06 am
For Sale: A Real Good All Brass Early Jones 60MPH Speedometer

Last post by GGZ « Sun Apr 11, 2021 8:14 pm
Replies: 2
by GGZ » Thu Apr 08, 2021 4:54 pm

First post

Here is a really nice, all brass early Jones 60 MPH speedometer. The overall diameter is about 3 and the depth is about 2 1/2 not including the mounting bracket. It has a very clear and crisp face with strong numbers. There are no cracks in the brass body or the rim which is unusual. The original beveled glass lens is clean and without chips or...

Last post

Still for sale. It sure is a nice one!

2 Replies

422 Views

Last post by GGZ
Sun Apr 11, 2021 8:14 pm
Wanted good used 11 tooth pinion

Last post by Mark Gregush « Sun Apr 11, 2021 8:05 pm
Replies: 4
by Mark Gregush » Sun Apr 11, 2021 11:00 am

First post

Looking for a good used 11 tooth pinion with no pitting, chunks missing, cracks or major wear. This is for a temporary rear end. I don't have room to tie up while I rebuild the one that is under the car (which is going to be slow process at this point) so have to be able to move/drive the car till it is done. The 2 I have now are too far gone for...

Last post

I'll take the one on the top left in top photo. I will reply to the email. Thank you.

4 Replies

164 Views

Last post by Mark Gregush
Sun Apr 11, 2021 8:05 pm
FS: Left Rear Roadster Fender Iron

Last post by Benji « Sun Apr 11, 2021 5:35 pm
Replies: 1
by Benji » Tue Apr 06, 2021 12:13 am

First post

Evening all,

Here is a single rear roadster fender iron for the left side. In nice shape!

Asking $50 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on pickup is...

Last post

Still for sale

1 Replies

154 Views

Last post by Benji
Sun Apr 11, 2021 5:35 pm
FS: Pair of Rear Roadster Fender Irons

Last post by Benji « Sun Apr 11, 2021 5:34 pm
Replies: 2
by Benji » Tue Apr 06, 2021 12:11 am

First post

Evening all,

I have here a pair (left and right) set of roadster rear fender irons. These look a bit shorter than I those for my 13. I have the measurements in photos. I dont know if they were modified, this is how I got them.

Asking $100 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June,...

Last post

Still for sale

2 Replies

174 Views

Last post by Benji
Sun Apr 11, 2021 5:34 pm
FS: 1913, 1914 Front Fender Irons and Gas Headlight Forks Set

Last post by Benji « Sun Apr 11, 2021 5:34 pm
Replies: 2
by Benji » Tue Apr 06, 2021 12:07 am

First post

Evening all,

Have a set of 1913 1914 front headlight forks and front fender iron set up for grabs. They are still attached to my frame, so please excuse the odd photos ( I will keep the bolts and castle nuts though). A bit of light rust, but no pits. Should clean up nice.

Asking $175 plus shipping. I can ship worldwide.

If paid in advance, I...

Last post

Still for sale

2 Replies

240 Views

Last post by Benji
Sun Apr 11, 2021 5:34 pm
FS: 1914 Windshield Complete with Hinges and Support Rods

Last post by Benji « Sun Apr 11, 2021 5:34 pm
Replies: 4
by Benji » Mon Apr 05, 2021 11:57 pm

First post

Evening all,

Found a few more parts in the barn to get rid of. I found this 1914 complete windshield setup I do not need. Its in nice shape, I unfolded it for the pics, so the hinges arent frozen. Has both original support rods in great shape, not bent or twisted. The original brass channel is there, but part of one half is bad as seen in the...

Last post

Still for sale

4 Replies

237 Views

Last post by Benji
Sun Apr 11, 2021 5:34 pm
FS: 1914 Side Lamp Bracket

Last post by Benji « Sun Apr 11, 2021 5:34 pm
Replies: 1
by Benji » Tue Apr 06, 2021 12:15 am

First post

Evening all,

Here is a single 1914 sidelamp bracket that is surplus to my needs. Some pitting as seen.

Asking $20 plus shipping. I can ship worldwide.

If paid in advance, I can hold for the Richmond swap meet in June, and there is a very good chance I will be a Luray, so could bring there.

I accept USPS money Order, Personal Check, or cash on...

Last post

Still for sale

1 Replies

136 Views

Last post by Benji
Sun Apr 11, 2021 5:34 pm
FS: SOLAR Acetylene Hand Spot Light for Speedster or?

Last post by Benji « Sun Apr 11, 2021 5:33 pm
Replies: 6
by Benji » Mon Mar 29, 2021 1:24 am

First post

Evening all,

I have 2 of these, in the same condition, and only need one. So this one has to go. A nice Solar gas spotlight. It has the original :lens: but has a crack as seen. NO reflector or burner unfortunately (mine too is missing). Otherwise in nice shape, with a lot of flaking paint.
No lower mount, and Id really like to see what one...

Last post

Still for sale

6 Replies

541 Views

Last post by Benji
Sun Apr 11, 2021 5:33 pm
FS 1926-27 gas tank

Last post by KimDobbins « Sun Apr 11, 2021 4:48 pm
Replies: 1
by KimDobbins » Sun Apr 11, 2021 4:47 pm

First post

Nice used 26-27 gas tank. Very solid, pretty clean inside. $450 plus shipping. Kdmks AT att.net.

Last post

Tank pictures

1 Replies

224 Views

Last post by KimDobbins
Sun Apr 11, 2021 4:48 pm
WTB - Running Board Luggage Rack Brackets

Last post by FATMAN « Sun Apr 11, 2021 3:46 pm
Replies: 11
by CudaMan » Sat Apr 10, 2021 4:47 pm

First post

I want to mount a small tool box onto the running board of my 1912 Flanders, but I don't want to drill any holes in the running board. Does anyone have a pair of luggage rack brackets or an otherwise trashed luggage rack that I can cannibalize for the brackets? I hate to buy and cut up a perfectly good, complete luggage rack.

Last post

I have about 30 of them if anyone needs one, Bob

11 Replies

250 Views

Last post by FATMAN
Sun Apr 11, 2021 3:46 pm
WTB Bosch Front Plates

Last post by Joe Bell « Sun Apr 11, 2021 3:38 pm
Replies: 1
by tman1913 » Wed Apr 07, 2021 8:11 pm

First post

In need of a couple of Bosch front plates for dizzy, no reproductions and crack free
IMG_0005.jpg

Last post

Are you looking for the distributer plates?

1 Replies

217 Views

Last post by Joe Bell
Sun Apr 11, 2021 3:38 pm
For Sale: Bruce McCalleys Model T Encylopedia now available on mini USB's

Last post by ahovey « Sun Apr 11, 2021 1:57 pm
Replies: 1
by roystoy57 » Sun Apr 11, 2021 12:13 pm

First post

Bruce McCalley's Model T Encyclopedia now available on mini USB's. The Encyclopedia is an expanded version of his book Model T Ford,The Car that Changed the World and includes data never before published anywhere else. Everything you need to know about a Model T is now available to quickly install on your computer, laptop or just carry with you to...

Last post

Worth the purchase! There is a lot of information not seen in the black book as well as worthwhile articles.

1 Replies

146 Views

Last post by ahovey
Sun Apr 11, 2021 1:57 pm
Wanted: 21 inch split rim front wood wheel.

Last post by Ruxstel24 « Sun Apr 11, 2021 1:17 pm
Replies: 8
by ivaldes1 » Sat Apr 03, 2021 11:58 pm

First post

As the title says. I found my last one a ‘Bimel’ did not fit so I need one more front wheel to get my project rolling.

Last post

Ignacio, I sent you the wheel and another email per your request. You should see it tomorrow or Tuesday.
I still have received no joy here. PayPal is good thanks, Dave
I was surprised that shipping was only $42 UPS.
I found a recent radiator box worked very nice.

8 Replies

335 Views

Last post by Ruxstel24
Sun Apr 11, 2021 1:17 pm
dial indicator toolset for 1" boring bar

Last post by Gene_French « Sun Apr 11, 2021 1:01 pm

by Gene_French » Sun Apr 11, 2021 1:01 pm

per request , i am offering my dial indicator toolset unit separately from my linebore unit ... this is available for 1 or 1.250 diameter boring bars ( buyer must specify ) ... this is used to measure the offset of the boring bit and is NOT a roll over type toolset as used by Tobin-arp and others ... price for 1 toolset is $90.00 + $10.00 postage...

0 Replies

146 Views

Last post by Gene_French
Sun Apr 11, 2021 1:01 pm
WTB 26-27 rear fenders

Last post by Jack Putnam, in Ohio « Sun Apr 11, 2021 11:38 am
Replies: 1
by Woody23 » Sun Apr 11, 2021 8:56 am

First post

I’m looking for a decent set of rear fenders for a ‘26-27 truck or roadster. Please send photos if you have any for sale. Thank you

Last post

I have a pair available if you are going to pick up. I'm in NW Ohio. jputnam(at)wcoil.com

1 Replies

103 Views

Last post by Jack Putnam, in Ohio
Sun Apr 11, 2021 11:38 am
early brass horn

Last post by Scott Rosenthal « Sun Apr 11, 2021 11:12 am

by Scott Rosenthal » Sun Apr 11, 2021 11:12 am

WTB Early brass double twist horn with scalloped style cover . Entire horn or cover with bell only. Must be restorable parts. Call 1 513 378-4235
early 09 horn.jpg

0 Replies

180 Views

Last post by Scott Rosenthal
Sun Apr 11, 2021 11:12 am
NOS TOQUET CARBURETOR

Last post by dykker5502 « Sun Apr 11, 2021 10:28 am
Replies: 3
by StanHowe » Tue Aug 27, 2019 11:52 pm

First post

Appears to me to be NOS. Interesting little carburetor that was pretty popular in the day.

$175 + $15 Priority mail. Paypal only

2019 8 27 carbs for sale 024.JPG

2019 8 27 carbs for sale 023.JPG

2019 8 27 carbs for sale 022.JPG

Stan Howe 406 949 3448 call or text
stanhowemt@aol.com

Last post

After a year of ownership, I can confirm it's a good carburetor :-)

3 Replies

1225 Views

Last post by dykker5502
Sun Apr 11, 2021 10:28 am
ISO Kelsey Wheel Lugs

Last post by KLTagert « Sun Apr 11, 2021 10:23 am
Replies: 8
by Grady Bruton » Fri Mar 26, 2021 12:42 pm

First post

Looking for 4 Kelsey wheel lugs like in the first attached picture. Alternatively, if those can't be found, 2 of the slanted lugs with a K stamped on them should work. Prefer the first kind with Kelsey written on them so that all my lugs will match. These are on the rear wheels of a TT.

Thanks,

Grady from Paradise, TX

Last post

Got it - I’ll call you. Thanks

8 Replies

464 Views

Last post by KLTagert
Sun Apr 11, 2021 10:23 am
NOS Tie Rod Bolts FS

Last post by sweet23 « Sun Apr 11, 2021 9:12 am
Replies: 15
by Dan Hatch » Sun Mar 28, 2021 4:02 pm

First post

Here are some NOS Ford script Tie Rod bolts, part T 2718. These have flip top oilers, so the are for 1917-27 cars and TT. These came out of a Ford Dealer in North Tenn that closed in 1928.
They still had the wax coating for rust protection on them when I took them out of the parts bin there. This pair was cleaned up with thinner. These are are the...

Last post

I will take the last set. Darryl

15 Replies

863 Views

Last post by sweet23
Sun Apr 11, 2021 9:12 am
Spring Mn. Model T Swap Meet.

Last post by BobP « Sun Apr 11, 2021 8:42 am
Replies: 6
by BobP » Wed Mar 17, 2021 8:26 pm

First post

We are having our annual Model T-Model A- pre WW2 swap meet on Saturday April 17th at 7A.M. at our farm at 7525 Co. 12 Blvd. Kenyon, Mn. It is 50 Miles south of St. Paul Mn. There is room for primitive camping the day-night before. Bring your parts, cars, and period memorabilia. There will be a lunch wagon on hand. Questions call 507 458 6778,...

Last post

btttttttttttt

6 Replies

792 Views

Last post by BobP
Sun Apr 11, 2021 8:42 am
Re-babbitted main bearing caps,laminated shim set

Last post by Gene_French « Sun Apr 11, 2021 8:31 am
Replies: 3
by Gene_French » Mon Nov 30, 2020 10:59 am

First post

For sale : Rebabbitted Model T main bearing sets , laminated shim set and timesaver lapping compound ... re-babbitted using tin base automotive high speed babbitt (SAE#2 Government Genuine alloy )... will supply caps bored to Standard diameter or customer specified dimension ... price of $145.00 includes postage in lower 48 states ... actual...

Last post

Larry:
i will check to be certain , but the laminated shim is .016 thick ... being 8 .002 shims total ... in theory a single .002 shim is removed from 1 side of the cap to effect a .001 adjustment ... if a smaller increment is needed a person may lap the caps ... i will lap with wet 180 sandpaper on a precision surface ( lapping block) ... hope...

3 Replies

421 Views

Last post by Gene_French
Sun Apr 11, 2021 8:31 am
FS: 26-27 Radiator Apron

Last post by Rick_Rice « Sun Apr 11, 2021 8:26 am
Replies: 8
by thacker » Tue Mar 23, 2021 11:13 pm

First post

Good condition. Bends have repairs. See pics.

$30 + actual shipping

Prefer PAYPAL (friends - so no charges) or check.

20210324_025308634_iOS.jpg
20210324_025245336_iOS.jpg

Last post

Hi Ted,
I sent you an offer via email and PM.
Kind Regards,
Rick Rice

8 Replies

655 Views

Last post by Rick_Rice
Sun Apr 11, 2021 8:26 am
Carb floats? FS

Last post by Dan Hatch « Sun Apr 11, 2021 6:28 am
Replies: 7
by Dan Hatch » Sun Mar 07, 2021 2:20 pm

First post

Here a couple brass floats I found in stuff I got. Look to be brass floats for Holly G carbs. I think they are JD floats that were at one time (many moons ago) used on Holley G and such carbs. There are some instructions on installing them in the bags. $5.00 each + shipping. Email me at address in pictures. Thanks Dan...

Last post

Back to the top

7 Replies

658 Views

Last post by Dan Hatch
Sun Apr 11, 2021 6:28 am
Tobin ARP Mic FS

Last post by Dan Hatch « Sun Apr 11, 2021 6:27 am
Replies: 6
by Dan Hatch » Sun Mar 21, 2021 6:00 pm

First post

Here is a Torbin ARP mic for Sale. This is a direct read mic, .050 each turn. $200.00 + shipping. Email me at address in pictures. Thanks Dan
1A3D8132-9813-4534-A4EB-2AC8BC77C9F1.jpeg
EA148432-5BCB-4FE9-8402-12C414FAFAB2.jpeg
7EFE762B-F85E-4E35-AC04-A450F2139FB9.jpeg
AF18D4DC-6530-478F-91D0-327547193022.jpeg

Last post

Back to the top

6 Replies

662 Views

Last post by Dan Hatch
Sun Apr 11, 2021 6:27 am
Tire Talc FS

Last post by Dan Hatch « Sun Apr 11, 2021 6:26 am
Replies: 2
by Dan Hatch » Wed Mar 31, 2021 9:32 am

First post

Here are a couple 1 lb cans of Rena Tire Talc. These are unopened extra ones I have. $10.00 each + shipping. Saw them on Amazon for $25 each. Email me at address in pictures. Thanks Dan
9F6A1D55-2D81-4063-850F-6ACE3050FE33.jpeg
E923DBF0-E968-459F-8AB7-A2C618EFC0CE.jpeg
B3AD257A-8009-4FFF-B12D-FB3E994992C6.jpeg

Last post

Back to the top

2 Replies

360 Views

Last post by Dan Hatch
Sun Apr 11, 2021 6:26 am
Valve Lapper FS

Last post by Dan Hatch « Sun Apr 11, 2021 6:26 am
Replies: 6
by Dan Hatch » Sun Mar 21, 2021 5:55 pm

First post

Here is a Valve Lapper I do not need. Some has put a suction cup on it. Works just fine. $30.00 + shipping. Email me at address in pictures. Thanks Dan
979F0A37-9380-4528-A369-6EEB06D9F36C.jpeg
2248175B-3BC4-4043-B969-192ED112790D.jpeg

Last post

Back to the top

6 Replies

533 Views

Last post by Dan Hatch
Sun Apr 11, 2021 6:26 am
NOS Brake Cam kit FS

Last post by Dan Hatch « Sun Apr 11, 2021 6:24 am
Replies: 1
by Dan Hatch » Sat Apr 10, 2021 4:01 pm

First post

I have 5 NOS Small Drum Brake Cam and Lever Kits for Sale. You get a Right and Left NOS Brake Cam and Two NOS Brake Cam Levers. These are NOT reproduction parts. Came out of Ford Dealers in the 1950’s. See pictures. $55.00 + shipping. Email me at address in pictures. Thanks Dan.
D84C543E-171F-42CF-8ADC-32871C086A5D.jpeg...

Last post

Back to the top

1 Replies

143 Views

Last post by Dan Hatch
Sun Apr 11, 2021 6:24 am
Wanted American LaFrance

Last post by Mark Gregush « Sun Apr 11, 2021 1:08 am
Replies: 4
by RichardW » Sat Apr 10, 2021 9:15 am

First post

Wanted early 4 cylinder American LaFrance, complete, or chassis, or major chassis components, motor transmission rear differential, what have you

Thanks

Richard

Last post

Rick the one on HCCA has sold.

4 Replies

284 Views

Last post by Mark Gregush
Sun Apr 11, 2021 1:08 am
FS FOUR CHAMPION X SPARK PLUGS "SOLD"

Last post by StevenS « Sat Apr 10, 2021 11:14 pm
Replies: 2
by StevenS » Sat Apr 10, 2021 10:15 pm

First post

I have for sale four Champion X spark plugs all are cleaned, tight, and spark. Also included are three other plugs, a faded lettering Champion X, a Wards plug, and a Champion 7 Ford plug. All for $60 and that includes shipping in the lower 48 states. Shipping other places will need to be recalculated. PM me or Email Me.

959champion#1.jpg...

Last post

Ron, They are yours. I sent email.

2 Replies

163 Views

Last post by StevenS
Sat Apr 10, 2021 11:14 pm
FREE FOR THE TAKING YOU PAY SHIPPING

Last post by StevenS « Sat Apr 10, 2021 10:34 pm

by StevenS » Sat Apr 10, 2021 10:34 pm

Free for the taking, see pictures. You pay shipping.

961hasslers#1.jpg

961hasslers#2.jpg

0 Replies

235 Views

Last post by StevenS
Sat Apr 10, 2021 10:34 pm
FS BRASS SEDIMENT BULB #2

Last post by StevenS « Sat Apr 10, 2021 10:27 pm

by StevenS » Sat Apr 10, 2021 10:27 pm

I have for sale a brass sediment bulb (THIS IS BULB #2). All is apart for your inspection, not froze up and clean inside. See pictures for details and condition. All for $65 and that includes shipping in the lower 48 states. Shipping other places will need to be recalculated. PM me or Email Me. MAKE SURE TO TELL ME WHICH BRASS BULB YOU WANT....

0 Replies

151 Views

Last post by StevenS
Sat Apr 10, 2021 10:27 pm
FS BRASS SEDIMENT BULB #1

Last post by StevenS « Sat Apr 10, 2021 10:24 pm

by StevenS » Sat Apr 10, 2021 10:24 pm

I have for sale a brass sediment bulb (THIS IS BULB #1). The handle is apart and the pet cock turns, not froze up and appears not too dirty inside. See pictures for details and condition. All for $65 and that includes shipping in the lower 48 states. Shipping other places will need to be recalculated. PM me or Email Me. MAKE SURE TO TELL ME WHICH...

0 Replies

136 Views

Last post by StevenS
Sat Apr 10, 2021 10:24 pm
WTB bosch distributor plate

Last post by dmdeaton « Sat Apr 10, 2021 9:10 pm
Replies: 2
by dmdeaton » Sat Apr 10, 2021 8:37 pm

First post

Probably a pipe dream but I would be very much interested in an original plate. I have a new reproduction plate and it has alignment issues. Go figure

Last post

Richard
Pm sent
Laptop at work and no email tonight

2 Replies

98 Views

Last post by dmdeaton
Sat Apr 10, 2021 9:10 pm
Restored Hlley G (1915-'18)

Last post by Bruce Compton « Sat Apr 10, 2021 8:07 pm
Replies: 5
by Bruce Compton » Sat Apr 03, 2021 5:13 pm

First post

Very nice brass body Holley G carb restored and ready to go. Looks like a new float, new venturi, new needle/seat, replaced or re-bushed throttle shaft and all new gaskets. Asking $275.00 including shipping to Cont.USA or Canada.

Last post

Very nice Holley G still available.

5 Replies

496 Views

Last post by Bruce Compton
Sat Apr 10, 2021 8:07 pm
Comer Auto Stop Signal , NOS incredible piece FS

Last post by Dropacent « Sat Apr 10, 2021 7:05 pm
Replies: 5
by Dropacent » Fri Apr 09, 2021 12:22 pm

First post

Really nifty tailight accessory patented 1914. Comer Auto Stop Signal NOS, mechanically operated . When brake pedal is depressed, the red flag semaphore flips up and shows STOP in illuminated letters. $1500 ppd , glad to take installment payments , for any more info, tmorsher@icloud.com license plate just shown on unit, not included....

Last post

Sorry, I posted the later patent that shows the model for attachment to windshield. Hank, that’s why it’s only $1500. Dan, I sure could do it, but would need more than that of the reproduction.

5 Replies

490 Views

Last post by Dropacent
Sat Apr 10, 2021 7:05 pm
Spindle reamer FS

Last post by John iaccino « Sat Apr 10, 2021 4:55 pm
Replies: 1
by Dan Hatch » Sat Apr 10, 2021 3:36 pm

First post

Here is an original Spindle Bushing and Toe Rod Bushings Reamer combo. This reamer is for reaming both the spindle bushings and also the tie rod bushings. You can see the bushing numbers and also the size on it. Not sure who made this one, there were many makers. Looks like might be Keystone, but not sure. $35.00 + shipping. Email me at address in...

Last post

email sent

1 Replies

193 Views

Last post by John iaccino
Sat Apr 10, 2021 4:55 pm
Drive Shaft Bushing Tool FS

Last post by Dan Hatch « Sat Apr 10, 2021 3:40 pm
Replies: 2
by Dan Hatch » Sat Apr 10, 2021 3:08 pm

First post

Here is a drive shaft bushing removal tool that is extra to me. Has plate, threaded rod, nuts and puller. $25.00 + shipping. Email me at address in pictures. Thanks Dan
C2215FC4-B6FA-4102-991F-405261576474.jpeg
F6D47101-2764-4BA6-A296-9578A1DE6E36.jpeg

Last post

Sold pending

2 Replies

150 Views

Last post by Dan Hatch
Sat Apr 10, 2021 3:40 pm
Exhaust Whistle For Model T & Early Cars

Last post by Mr. T Ford « Sat Apr 10, 2021 1:35 pm
Replies: 3
by Mr. T Ford » Thu Mar 18, 2021 1:29 pm

First post

Exhaust Whistle For Model T & Early Cars, $175 or Best Offer.
This whistle is in real good condition & is a hard to find item.

Last post

Exhaust Whistle For Model T & Early Cars-Item Sold

3 Replies

416 Views

Last post by Mr. T Ford
Sat Apr 10, 2021 1:35 pm
Model T & Other Cars Running Board Mounted Tool Box

Last post by Mr. T Ford « Sat Apr 10, 2021 1:33 pm
Replies: 7
by Mr. T Ford » Sat Mar 27, 2021 9:17 pm

First post

Model T & Other Cars Running Board Mounted Tool Box.
$180 Or Best Reasonable Offer.

Last post

Model T & Other Cars Running Board Mounted Tool Box- Item Sold

7 Replies

699 Views

Last post by Mr. T Ford
Sat Apr 10, 2021 1:33 pm
NOS Small Brake Levers FS SOLD

Last post by Walt Wise « Sat Apr 10, 2021 11:39 am
Replies: 7
by Dan Hatch » Sat Feb 27, 2021 11:46 am

First post

Here are some Small Drum brake levers part # 2562. They NOS. New ones are $20.00 each.
These will be $15.00 each + shipping. Email me at address in pictures. Thanks Dan.
C7E19E31-B5E1-42D2-8486-4D1240D48427.jpeg
6BEFECF0-DED3-4C3A-9AAE-A3858D9A090D.jpeg

Last post

Mr. Dan, I just sent you an email. I need one if you still have any? Walt Wise

7 Replies

874 Views

Last post by Walt Wise
Sat Apr 10, 2021 11:39 am
early clamp tightened around the brass tubing SOLD

Last post by Quickm007 « Sat Apr 10, 2021 10:50 am
Replies: 4
by Quickm007 » Thu Apr 08, 2021 10:35 am

First post

FS early repro clamp tightened around the brass tubing near to the Radiator. I have 2 sets for my 1911 so I'm selling the extra one. Asking $40 plus shipping. Paypal Prefered. Thank you MTFCA.

Brass rod.JPG Brass rod 1.JPG Brass rod 2.JPG Brass rod 3.JPG

Last post

Payment received. Thank you Austin

Sorry Randall appreciated the interest as well

4 Replies

412 Views

Last post by Quickm007
Sat Apr 10, 2021 10:50 am
Model T Transmission Brake Drum 1909 to 1925.

Last post by Mr. T Ford « Fri Apr 09, 2021 9:36 pm
Replies: 4
by Mr. T Ford » Thu Mar 18, 2021 2:49 pm

First post

Model T Transmission Brake Drum 1909 to 1925.
$80 Each Or Best Offer.
Have Two Other Transmission Brake Drums For 1909 to 1925 Model Ts For Sale @ $80 Each Or Best Offer.

Last post

Model T Transmission Brake Drum 1909 to 1925-All Drums Sold

4 Replies

592 Views

Last post by Mr. T Ford
Fri Apr 09, 2021 9:36 pm
2 Cylinder T Engine Project

Last post by David Mazza « Fri Apr 09, 2021 8:55 pm
Replies: 3
by Chad_Marcheese » Mon Apr 05, 2021 8:33 pm

First post

The time has come for me to make some decisions, so I am offering up my unfinished, but near complete 2 Cylinder T engine project. $650 Local pickup or can crate and ship in the US on your dime.

I can provide as many pics as you need, many were posted on the old forums as this was a project I started from scratch.
A single Valve chamber block was...

Last post

Interested! Pm sent!

3 Replies

624 Views

Last post by David Mazza
Fri Apr 09, 2021 8:55 pm
Model T connecting rod mold

Last post by Gene_French « Fri Apr 09, 2021 7:09 pm
Replies: 1
by Gene_French » Sat Feb 06, 2021 8:55 am

First post

connecting rod mold for Model T Babbitt connecting rods... pours bearing at 1 1/8 diameter with excess material on side flanges for finish machining ...price $85 plus $7.60 priority mail postage in lower 48 states ...actual postage outside this area or international … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t rod1.JPG t rod.JPG

Last post

to the top again , thanks MTFCA

1 Replies

220 Views

Last post by Gene_French
Fri Apr 09, 2021 7:09 pm
WTB driver side seat hinges for a 1920 Center Door

Last post by CDooREDW « Fri Apr 09, 2021 6:12 pm
Replies: 8
by 26Tpickup » Thu Apr 01, 2021 2:26 pm

First post

I'm looking for suitable replacement hinges for the driver's seat in my 1920 Centerdoor Sedan. Both broke when I was rear-ended
20210408_144104.jpg 20210408_144009.jpg VanBriggle2.JPG Van Briggle 3_LI (2).jpg

Last post

Great to hear! Guessing he has what you need, plus. Safe travels.

Ron

8 Replies

353 Views

Last post by CDooREDW
Fri Apr 09, 2021 6:12 pm
Steel Truck Bed - Sold

Last post by Richard K « Fri Apr 09, 2021 5:14 pm
Replies: 1
by PDGx » Fri Apr 09, 2021 2:29 pm

First post

Has been sold

Last post

PM Sent, Thanks Rich

1 Replies

300 Views

Last post by Richard K
Fri Apr 09, 2021 5:14 pm
Original 1910 1911 Stewart brass speedometer cable F/S

Last post by Layden Butler « Fri Apr 09, 2021 3:40 pm

by Layden Butler » Fri Apr 09, 2021 3:40 pm

Unusual all brass cable with steel reinforcing spiral sleeve and clip for leather strap! More pictures available, happy to answer any questions.

0 Replies

217 Views

Last post by Layden Butler
Fri Apr 09, 2021 3:40 pm
Looking for 2 original Ford Model T keys #54

Last post by Mark Gregush « Fri Apr 09, 2021 3:34 pm
Replies: 3
by SteveBoothroyd » Mon Apr 05, 2021 10:45 pm

First post

I'm Looking for 2 original #54 Ford Model T keys in good condition.
Let me know price and your contact info.
Thanks

Steve Boothroyd
Sidney, B.C.
Canada

Last post

Rocking deal, except they show no shipping to Canada. :(

3 Replies

253 Views

Last post by Mark Gregush
Fri Apr 09, 2021 3:34 pm
Hand starter and shock absorber misc pieces F/S

Last post by Layden Butler « Fri Apr 09, 2021 1:43 pm

by Layden Butler » Fri Apr 09, 2021 1:43 pm

Odd lot of model T related accessory parts. $125 domestic postage $18.

0 Replies

188 Views

Last post by Layden Butler
Fri Apr 09, 2021 1:43 pm
1913 KW Lid Instructions

Last post by TRDxB2 « Fri Apr 09, 2021 1:33 pm
Replies: 9
by Original Smith » Tue Apr 06, 2021 11:04 am

First post

Need to find lid instructions for a 1913 KW coilbox. Randall had them but can't find them. I have a lid that needs the instructions.

Last post

The box Frank posted is mint! You are lucky to have it.

Unfortunately its not my box. Got the picture off the Internet. I did some additional searching about restoring/cleaning old documents and it sounds like you can clean up Keith's image of the instructions with Photoshop (I don't have it and other on-line software didn't work). This Youtube...

9 Replies

644 Views

Last post by TRDxB2
Fri Apr 09, 2021 1:33 pm
Free item just pay shipping

Last post by Quickm007 « Fri Apr 09, 2021 11:48 am
Replies: 3
by Quickm007 » Thu Apr 08, 2021 11:10 am

First post

HI, I have these nice brass items. No idea if it is Model T. It is free just pay the shipping.

free.JPG

Last post

Sent to James. Thank you MTFCA

3 Replies

555 Views

Last post by Quickm007
Fri Apr 09, 2021 11:48 am
timing cover centering gage

Last post by Gene_French « Fri Apr 09, 2021 10:59 am
Replies: 19
by Gene_French » Sat Feb 02, 2019 9:13 am

First post

front timing cover centering gage … this is the tool used to center the timer recess to assure uniform timing from cylinder to cylinder … this is often overlooked when re-assembling an engine and a poorly centered timer will result in poor performance … this tool centers the actual timer recess to the camshaft ...NOT the much smaller design that...

Last post

to the top again , thanks MTFCA

19 Replies

3793 Views

Last post by Gene_French
Fri Apr 09, 2021 10:59 am
Ball cap , Re-babbitted ball cap bored to your specifications

Last post by Gene_French « Fri Apr 09, 2021 10:58 am
Replies: 1
by Gene_French » Wed Feb 10, 2021 10:21 am

First post

Re-babbitted Ball cap ... i will machine to size for your specific needs ... price is $50.00 + $15.05 postage in lower 48 states ... exchange core is required... i can machine any size ranging from standard down to 1.500 diameter ... Gene French 49519 cr23 Nunn,Co. 80648 ... phone # 970-581-2808

Last post

to the top again , thanks MTFCA

1 Replies

180 Views

Last post by Gene_French
Fri Apr 09, 2021 10:58 am
Model T main bearing mold

Last post by Gene_French « Fri Apr 09, 2021 10:57 am
Replies: 1
by Gene_French » Sat Feb 06, 2021 9:00 am

First post

mainbearing mold for model T Ford … price $100 plus $13.60 postage in lower 48 states … actual postage outside this area or international … I am unable to add photos as yet ! email for photos or information … gene French 49519 cr.23 Nunn,Co. 80648 phone 970-581-2808 t main.jpg t main top.jpg

Last post

to the top again , thanks MTFCA

1 Replies

150 Views

Last post by Gene_French
Fri Apr 09, 2021 10:57 am
Mainbearing linebore Model T and A Ford

Last post by Gene_French « Fri Apr 09, 2021 10:55 am
Replies: 31
by Gene_French » Sun Jan 27, 2019 6:02 pm

First post

linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $875 plus $75 priority...

Last post

to the top again , thanks MTFCA

31 Replies

5849 Views

Last post by Gene_French
Fri Apr 09, 2021 10:55 am
Tulare swap meet May 1st

Last post by 949cathy « Fri Apr 09, 2021 9:22 am
Replies: 2
by 949cathy » Tue Mar 16, 2021 6:37 pm

First post

Antique T Motor Sports will be at the Tulare swap meet spaces H-26 & I-25. If you want any items such as seats or wheels place let me know so I can have it for you. email me at bill7472@aceweb.com

Last post

Antique T Motor Sports spaces H26 & I25 View our parts at

2 Replies

503 Views

Last post by 949cathy
Fri Apr 09, 2021 9:22 am
WTB - Outside Mirror

Last post by RustyFords « Fri Apr 09, 2021 8:38 am
Replies: 6
by RustyFords » Wed Apr 07, 2021 2:24 pm

First post

Looking for a weathered outside mirror for my '24 Touring (the mirror that goes on the windshield post).

I'm about to install a top and will need the mirror for the passenger side. I know the vendors sell them, but I'm looking for something that will compliment the weathered look of my car.

Thanks,
Don

allenchemistryATgmail.com

Last post

There you go Don. Lovely patina. If you cant live with the mirror glass fault, about the only way around it is to fix a new glass over the existing one. The original is fitted by spinning the brass retainer ring to the glass/mirror head, and it cannot be easily removed.

Allan from down under.

You’re right Allan...the patina is lovely. I’ll be...

6 Replies

235 Views

Last post by RustyFords
Fri Apr 09, 2021 8:38 am
K R Wilson # 3089-N plug wrench?

Last post by Mark Gregush « Fri Apr 09, 2021 1:28 am
Replies: 3
by donald4ham » Wed Apr 07, 2021 10:58 pm

First post

I have a bunch of these wrench's and no one seems to know their use, it was mentioned that they would work on spark plugs. I tried one and it clears the top of the terminal and fits the plug body. If you need or want one, $10.00 = shipping There are app 14 available. they look to be n.o.s. that came from a long ago closed Ford dealer.

Last post

The first number, 3, should be front axle tool. Checked our catalogs at the shop, but this tool is newer then our newest catalog, which came out about 1940.

3 Replies

383 Views

Last post by Mark Gregush
Fri Apr 09, 2021 1:28 am
FOUND! Wanted, an early non louvered model T hood

Last post by JTT3 « Thu Apr 08, 2021 11:20 pm
Replies: 3
by JTT3 » Wed Apr 07, 2021 10:36 pm

First post

Looking for a good hood per the subject line.
Thanks John

Last post

Thanks Mike & Frank. Located one near by.

3 Replies

312 Views

Last post by JTT3
Thu Apr 08, 2021 11:20 pm
Looking for auxiliary brakes for large drum t

Last post by Jonah D'Avella « Thu Apr 08, 2021 5:42 pm

by Jonah D'Avella » Thu Apr 08, 2021 5:42 pm

Looking for well used aux brakes, need to fit a late rear end. Preferably inexpensive compared to new ones.

0 Replies

158 Views

Last post by Jonah D'Avella
Thu Apr 08, 2021 5:42 pm
TT outside brakes

Last post by tmodeldriver « Thu Apr 08, 2021 5:13 pm
Replies: 1
by tmodeldriver » Tue Apr 06, 2021 10:32 am

First post

Have any of you guys got a set of outside brakes for the TT truck that are pretty well used up? Cheap? Message me with a description and maybe we can work something out. Thanks. Bob

Last post

Located a set of RM brakes. Thanks, forum.

1 Replies

245 Views

Last post by tmodeldriver
Thu Apr 08, 2021 5:13 pm
One item left, wonderful tire pump

Last post by Dropacent « Thu Apr 08, 2021 3:03 pm

by Dropacent » Thu Apr 08, 2021 3:03 pm

Only one item left from this pile. It’s a sleeper, someone will be happy to get it. This is an original Bridgeport tire pump with a small ford script on the underside. The barrel is nickel plated brass. Some age cracks on the backside, but it will display well, and this one is rarely seen. An overnight dip in vinegar will make the nickel shine....

0 Replies

257 Views

Last post by Dropacent
Thu Apr 08, 2021 3:03 pm
An original large lotor meter

Last post by ModelT46 « Thu Apr 08, 2021 12:36 pm
Replies: 3
by ModelT46 » Tue Apr 06, 2021 6:49 pm

First post

An original large motor meter. Very nice conditional. Red does not show, probably dried up. Original face.
$88 postpaid.

Last post

Sold, thank you.

3 Replies

462 Views

Last post by ModelT46
Thu Apr 08, 2021 12:36 pm
Ford Bumpers, Gas tanks, Rear Axle parts

Last post by Brent Mize « Thu Apr 08, 2021 9:55 am

by Brent Mize » Thu Apr 08, 2021 9:55 am

D098BC7A-09DC-4930-A381-4149FFD3C74E.jpeg

0 Replies

261 Views

Last post by Brent Mize
Thu Apr 08, 2021 9:55 am
Spring Carburetor sale

Last post by Bruce Compton « Wed Apr 07, 2021 10:20 pm
Replies: 5
by Bruce Compton » Sat Mar 27, 2021 5:11 pm

First post

I have 6 rebuilt, tested and guaranteed Model T carbs. All are set up and ready to install, nor core charges, and all prices include shipping to Cont. USA or Canada. # 1 is a regular Holley NH ('22-'25, but can be fitted with the later adjustment for '25-'27) @$195.00. #2 is a Holley straight through with the brass throttle arm and cast choke arm...

Last post

Thanks Mark. The #1 NH has also sold. Just the two NH straight throughs left plus a very nice '15-'18 brass body Holley G @ $275.00 including shipping.

5 Replies

1066 Views

Last post by Bruce Compton
Wed Apr 07, 2021 10:20 pm
Wanted: Ford pliers and tire iron for factory toolkit.

Last post by Allan « Wed Apr 07, 2021 9:56 pm
Replies: 2
by ivaldes1 » Wed Apr 07, 2021 5:36 pm

First post

As the subject line says wanting to complete a factory tool kit.

Last post

I have a pair of tyre irons, and most likely have pliers in my swap meet stuff. I'll dig them out and get a postage quote if you are interested.

Allan from down under.

2 Replies

194 Views

Last post by Allan
Wed Apr 07, 2021 9:56 pm
Frontenac SOHC cover Wanted

Last post by Layden Butler « Wed Apr 07, 2021 5:24 pm

by Layden Butler » Wed Apr 07, 2021 5:24 pm

Surely someone has a reproduction or pattern to cast one!! Who has made these in the past?
Marked with arrow in picture. Not the circle!
Any help appreciated.

0 Replies

129 Views

Last post by Layden Butler
Wed Apr 07, 2021 5:24 pm
New rear frame lowering brackets

Last post by 949cathy « Wed Apr 07, 2021 5:18 pm

by 949cathy » Wed Apr 07, 2021 5:18 pm

New rear frame bolt on lowering brackets. View the listing at,

0 Replies

217 Views

Last post by 949cathy
Wed Apr 07, 2021 5:18 pm
1926-7 Shock Absorbers factory F/S

Last post by Layden Butler « Wed Apr 07, 2021 2:12 pm
Replies: 1
by Layden Butler » Wed Apr 07, 2021 2:09 pm

First post

Rare factory Ford shock absorbers for 1926 and 1927 Model T, one of the few factory offered accessories! $325, domestic postage $18.

Last post

Restoration

1 Replies

240 Views

Last post by Layden Butler
Wed Apr 07, 2021 2:12 pm
Large drum Rucksell

Last post by BlackTinLizzie « Wed Apr 07, 2021 1:27 pm
Replies: 13
by BlackTinLizzie » Mon Apr 05, 2021 8:26 am

First post

Selling a Large Drum Rucksell 13 39 gears 3to1 ratio.
I got this 15 plus years ago a Hershey and been stored since time to put back in circulation.
Gears look good all clean see photos
Shifter is stiff will need to be cleaned of dried up grease.
One threaded hole for the shifter is helicoiled the other is ok but might need helicoiled some day....

Last post

Thanks to all who responded
Sold to Keith
Thanks MTFCA

13 Replies

931 Views

Last post by BlackTinLizzie
Wed Apr 07, 2021 1:27 pm
FORD Vintage Tire gauges for sale FORD

Last post by Mark Osterman « Wed Apr 07, 2021 11:41 am
Replies: 5
by Dropacent » Tue Mar 30, 2021 8:33 pm

First post

These are just about 100 years old now. We find them, we buy them, we take them apart, clean,oil,regulate. We polish or nickel plate the case and stem. Choice of 5 different faces. We assemble in your choice of dull nickel, then polished, or in polished brass. New clear lens, delivered to your door, $85 for brass case , $95 for nickel case.
A...

Last post

Did they make them for the clincher tires?

5 Replies

571 Views

Last post by Mark Osterman
Wed Apr 07, 2021 11:41 am
Looking for 5 Schrader 777 tube stem covers in reasonable shape

Last post by Mark Osterman « Wed Apr 07, 2021 11:38 am
Replies: 1
by SteveBoothroyd » Sun Apr 04, 2021 10:06 pm

First post

I'm looking for 5 of the ever elusive Schrader 777 valve stem covers with locknuts and washers in good conddition if possible.

Regards,

Steve Boothroyd
Sidney, B.C. Canada

Last post

Email me Markosterman@icloud.com

1 Replies

224 Views

Last post by Mark Osterman
Wed Apr 07, 2021 11:38 am
SUNDAY SWAP MEET

Last post by Mark Chaffin « Wed Apr 07, 2021 11:22 am
Replies: 9
by Mark Chaffin » Sun Apr 04, 2021 2:47 pm

First post

Good morning everyone and Happy Easter! Hope you all are doing well. This week’s Sunday Swap Meet offerings are all good new, NOS and a couple used items. Description and prices are as indicated below. In most cases, USPO Flat Rate shipping will be an additional $8.50. Payment by PayPal (preferred) or by check. Message me or call Mark Chaffin...

Last post

Still have a few items available.

9 Replies

801 Views

Last post by Mark Chaffin
Wed Apr 07, 2021 11:22 am
Wanted: narrow trans brake drum with good lugs

Last post by got10carz « Wed Apr 07, 2021 10:59 am
Replies: 7
by Trford » Tue Apr 06, 2021 10:03 am

First post

Looking for a narrow trans brake drum with good clutch plate lugs.

Thank You
Tom F

Last post

Adam, what I would do is bust it out to the bottom, or grind it, fill in the entire hole with brass, and machine. Use the pressure plate to transfer the hole.

7 Replies

317 Views

Last post by got10carz
Wed Apr 07, 2021 10:59 am
Grab Bag of Misc Parts one Money gets it ALL

Last post by henryford2 « Tue Apr 06, 2021 5:29 pm

by henryford2 » Tue Apr 06, 2021 5:29 pm

Like the title say, grab bag of misc. Model T parts, one money gets them all. $60 and IT includes shipping in the CONUS. Thanks, stay safe, reply to jandulics@gmail.com

IMG_0186.jpeg
IMG_0187.jpeg
IMG_0188.jpeg
IMG_0189.jpeg

0 Replies

469 Views

Last post by henryford2
Tue Apr 06, 2021 5:29 pm
Some nice tires for sale

Last post by YellowTRacer « Tue Apr 06, 2021 4:25 pm
Replies: 1
by Dropacent » Tue Apr 06, 2021 2:37 pm

First post

Here are some nice tires. The back two, white and black are free for the postage. They would be good rollers. The front two are really nice original tires. Would be perfect for an old restoration or a real original car. I can share any needed details and better pics to anyone interested. I’m thinking $60 each on those, or $100 for pair. The front...

Last post

The black one free for postage appears to have good tread, what's wrong with it other than being old? If there's nothing else wrong I'll take it.

Ed aka #4

1 Replies

506 Views

Last post by YellowTRacer
Tue Apr 06, 2021 4:25 pm

New Topic

9127 topics

Page 1 of 92
- Jump to page:
1
2
3
4
5
…
92
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum