Classifieds - Parts - Page 12

Classifieds - Parts

New Topic

10414 topics

Page 12 of 105
- Jump to page:
Previous
1
…
10
11
12
13
14
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

83923 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Junior motometer for parts SOLD

Last post by 1925 Touring « Fri Oct 10, 2025 1:37 pm
Replies: 5
by big2bird » Sun Aug 10, 2025 2:07 pm

First post

20250810_105911.jpg 20250810_105922.jpg

As stated, for parts. Thermometer is loose. Probably broken.
Glass and legend plate are nice, as well as rims.

$20 + $10 shipping to lower 48.
Check or PayPal

Contact via forum. PM or email.

Last post

William was first. Sold.

That's fine, enjoy the motormeter William.

5 Replies

1092 Views

Last post by 1925 Touring
Fri Oct 10, 2025 1:37 pm
Rim Nuts

Last post by Oldav8tor « Fri Oct 10, 2025 10:21 am
Replies: 3
by Original Smith » Wed Oct 08, 2025 12:33 pm

First post

WTB: Rim nuts that will fit Blockley valve stems. Their valves are much larger than a standard Model T. Is rim nut the correct term? I have lots of the correct nuts for T's, the 777's and 888's. I know Ford didn't use the 888 but I use them because they work and reduce the weight slightly.

Last post

I have Blockleys and use a valve stem cover I bought from langs. I also use this rim nut, also from Langs.
wash.jpeg

3 Replies

570 Views

Last post by Oldav8tor
Fri Oct 10, 2025 10:21 am
WTB: 17-23 Left Front Fender

Last post by Apis Mellifera « Fri Oct 10, 2025 9:52 am

by Apis Mellifera » Fri Oct 10, 2025 9:52 am

I struck out at Hershey. Looking for a 17-23 left front fender.

0 Replies

292 Views

Last post by Apis Mellifera
Fri Oct 10, 2025 9:52 am
Sold: 1926-1927 Brass Radiator Shell

Last post by GGZ « Thu Oct 09, 2025 8:51 pm
Replies: 1
by GGZ » Thu Oct 09, 2025 8:40 pm

First post

Sold to Ed. That was fast!! An original 1926-1927 brass radiator shell. It could be used on 1923-1925 as well. Good original condition. There is one, unnoticeable, very small split on the right, lower lace area. It wouldn't be seen on a car. The neck area is in very good condition. The mounting feet are good. There is original lacing. These are...

Last post

Sold!!!!!!!

1 Replies

287 Views

Last post by GGZ
Thu Oct 09, 2025 8:51 pm
Snyder spare wheel bracket

Last post by big2bird « Thu Oct 09, 2025 4:53 pm
Replies: 3
by big2bird » Sun Jul 13, 2025 12:46 pm

First post

20250713_092155.jpg 20250713_092245.jpg 20250713_092248.jpg

Bought for $300. Will take $150 + 50 shipping
Contact via forum. PM or email

Last post

Last bump.

3 Replies

1409 Views

Last post by big2bird
Thu Oct 09, 2025 4:53 pm
Set of 3 Boyco caps SOLD

Last post by big2bird « Thu Oct 09, 2025 4:49 pm
Replies: 2
by big2bird » Sun Jul 13, 2025 12:43 pm

First post

20250713_092150.jpg

Brand new repo Boyco caps for show car.
I have decided to go another route.
Paid $200, will take $100+ $10 postage

Contact via forum. PM or email

Last post

Sold to Terry. Thank you.

2 Replies

1012 Views

Last post by big2bird
Thu Oct 09, 2025 4:49 pm
FS letter pedals

Last post by Karl Von Neumann « Thu Oct 09, 2025 2:50 pm
Replies: 2
by Karl Von Neumann » Fri Sep 12, 2025 12:14 pm

First post

Nice prignal set of letter pedals c &b show some wear c has a hole drilled thru it could be welded up $100 shipped lower 48

Last post

Move to top

2 Replies

734 Views

Last post by Karl Von Neumann
Thu Oct 09, 2025 2:50 pm
Pending 1913 engine

Last post by Karl Von Neumann « Thu Oct 09, 2025 2:50 pm
Replies: 6
by Karl Von Neumann » Wed Aug 20, 2025 1:40 pm

First post

1913 engine standard bore #1cyl has a nice wrist pin mark it will probably need a sleeve other cylinders look good what's you are buying in the block and rotating assembly no trans pan or hogs head they will be removed. $600 Local pick up pleasant prairie wisconsin

SALE PENDING

Last post

Move to top

6 Replies

2122 Views

Last post by Karl Von Neumann
Thu Oct 09, 2025 2:50 pm
FS new aluminum hood 1915-16

Last post by KimDobbins « Thu Oct 09, 2025 10:55 am
Replies: 4
by KimDobbins » Mon Aug 11, 2025 11:24 pm

First post

New in the box. $275.00 plus shipping. kdmks AT att.net.

Last post

its been sold.

4 Replies

2199 Views

Last post by KimDobbins
Thu Oct 09, 2025 10:55 am
Holley G Pats Pending carburetor/sold

Last post by Corey Walker « Thu Oct 09, 2025 7:02 am

by Corey Walker » Thu Oct 09, 2025 7:02 am

1914 Holley G, new float, float valve, venturi and choke spring, throttle shaft bushing installed, reconditioned spray needle, test run. $300 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

1385 Views

Last post by Corey Walker
Thu Oct 09, 2025 7:02 am
WTB High Hood Cowl - Found

Last post by JZSlenker « Wed Oct 08, 2025 6:44 pm

by JZSlenker » Wed Oct 08, 2025 6:44 pm

Looking to buy a high hood cowl. None found at Hershey 😞.

Edit, found one online.

0 Replies

341 Views

Last post by JZSlenker
Wed Oct 08, 2025 6:44 pm
WTB-under the running board toolbox.

Last post by Etudes10 « Wed Oct 08, 2025 2:47 pm
Replies: 3
by WorldChamp1914 » Tue Oct 07, 2025 9:33 pm

First post

Any out there?

Last post

28 1/2 x 15 1/2 hangs down about 5 inches. Wasn't planning on shipping it.

3 Replies

512 Views

Last post by Etudes10
Wed Oct 08, 2025 2:47 pm
WTB 26/27 Roadster Top Irons

Last post by JonLevine « Wed Oct 08, 2025 1:38 pm
Replies: 2
by JonLevine » Tue Oct 07, 2025 11:04 pm

First post

Looking for a set of top irons for a 26/27 roadster. I know these are not easy to find. Appreciate any suggestions or ideas on locating serviceable parts.

Thank you!

Last post

Thank you very much for your reply Scott, I just sent you an email.

Jon

2 Replies

340 Views

Last post by JonLevine
Wed Oct 08, 2025 1:38 pm
fender iron 17/25

Last post by Melba Nolan « Wed Oct 08, 2025 12:26 am
Replies: 8
by Melba Nolan » Sun Oct 05, 2025 10:03 pm

First post

for sale: set of fender irons $50 plus postage

20250327_171454.jpg 20250327_171442.jpg

Last post

yes, will try tomorrow

8 Replies

868 Views

Last post by Melba Nolan
Wed Oct 08, 2025 12:26 am
WTB..anti kick accessory

Last post by WorldChamp1914 « Tue Oct 07, 2025 9:21 pm
Replies: 1
by WorldChamp1914 » Tue Oct 07, 2025 9:20 pm

First post

IMG_7030.png IMG_7031.png

Last post

Any out there?

1 Replies

397 Views

Last post by WorldChamp1914
Tue Oct 07, 2025 9:21 pm
Magneto battery pack diode accessry.

Last post by Oldav8tor « Tue Oct 07, 2025 7:59 pm
Replies: 2
by Jay In Northern Ca. » Tue Oct 07, 2025 6:43 pm

First post

Anyone know if someone is reproducing the Diode battery charger accessory powered by the magneto for non starter cars? I bought and installed one years ago on our1915 roadster and would like to install one on another T we have.

Last post

If you can't find one you can make one. The circuit is fairly simple. You need a diode such as the 1N5042, P600M or equiv. , a bulb socket , and a automotive light bulb.

If the bulb burns out, it may mean that the diode shorted (had that happen once). The blown bulb protects the magneto. You never want to connect the battery and mag directly as...

2 Replies

502 Views

Last post by Oldav8tor
Tue Oct 07, 2025 7:59 pm
Buy 2 Full Flow Float Valves and get a special 1/4-32 tap for free - Sold OUT

Last post by Scott_Conger « Tue Oct 07, 2025 6:51 pm

by Scott_Conger » Tue Oct 07, 2025 6:51 pm

I just found 5 brand new, in the package 1/4-32 taps. They are top quality Chinese made...not my normal USA taps that I typically offer, but are still a quality product and will work just fine for many many years. The bonus is, these are FREE and my USA ones are not...

In case you missed it, they are FREE if you buy 2 or more Full Flow Float...

0 Replies

492 Views

Last post by Scott_Conger
Tue Oct 07, 2025 6:51 pm
Trade complete top assembly

Last post by micshotrodgarage « Tue Oct 07, 2025 5:30 pm
Replies: 1
by Lil Teezy » Sat Oct 04, 2025 10:57 am

First post

Hello from Colorado! I would like to trade a complete 27 roadster windshield and roof for a complete 26 touring roof and windshield. The roadster parts are original with thick old chrome plating. There is no pitting or flaking and minimal scratches. The chromed roadster parts were very expensive, but I feel like the scarcity of the touring roof...

Last post

Chris, E Mail sent

1 Replies

615 Views

Last post by micshotrodgarage
Tue Oct 07, 2025 5:30 pm
For sale Big brake rod supports

Last post by Charlie_26_TT_Ccab « Tue Oct 07, 2025 4:28 pm
Replies: 5
by elliott1936 » Mon Oct 06, 2025 3:54 pm

First post

This is set is new old stock and has not been used. $20.00 plus the postage. five03-644-937four Tom

Last post

Sent you an email.

5 Replies

656 Views

Last post by Charlie_26_TT_Ccab
Tue Oct 07, 2025 4:28 pm
Fender transportation from Hershey

Last post by Michael Paul « Tue Oct 07, 2025 11:15 am
Replies: 1
by Michael Paul » Sun Oct 05, 2025 7:31 pm

First post

Hi all, is any one driving back from Hershey to California that has room for a set of model t fenders?
I'm located near Nevada City in Northern California.

Any help appreciated

Mike

Last post

One more time, looking for a ride to the west coast for a set of 1909 model t fenders. Any help appreciated.
Michael

1 Replies

382 Views

Last post by Michael Paul
Tue Oct 07, 2025 11:15 am
1913 ILL plate for T SOLD

Last post by fordrelic « Tue Oct 07, 2025 7:52 am
Replies: 8
by fordrelic » Mon Oct 14, 2024 8:52 am

First post

1913 Illinois licence plate.

Great for collection or for your model T.

$180 includes shipping

Last post

Sold, Thanks Brian

8 Replies

3876 Views

Last post by fordrelic
Tue Oct 07, 2025 7:52 am
13 Roadster deck at Hershey

Last post by Dan Hatch « Mon Oct 06, 2025 6:46 pm

by Dan Hatch » Mon Oct 06, 2025 6:46 pm

Saw a really nice 13 Turtle deck in the Chocolate Field South today. Not mine but if I needed one it would be.
Come by my spaces CR33-38 and I will show you here it is.
I don’t know the space number but I can show you. Dan

0 Replies

547 Views

Last post by Dan Hatch
Mon Oct 06, 2025 6:46 pm
FS Winfield carburetor adapter

Last post by ThreePedalTapDancer « Mon Oct 06, 2025 6:26 pm
Replies: 3
by ThreePedalTapDancer » Mon Sep 29, 2025 7:13 pm

First post

Here we have a nice aluminum Winfield carburetor adapter. It measures 2-1/8 hole to hole center with 1-5/16 bore opening. 1-7/16 hole to hole center on the Winfield 4 hole flange side. 75 includes shipping.

IMG_4553.jpeg

Last post

Still available

3 Replies

623 Views

Last post by ThreePedalTapDancer
Mon Oct 06, 2025 6:26 pm
For sale big drum brake rod supports

Last post by Ken Buhler « Mon Oct 06, 2025 5:23 pm
Replies: 1
by elliott1936 » Mon Oct 06, 2025 3:58 pm

First post

Big drum brake rod supports New old stock. $20.00 Tom five03-644-937Four

Last post

Hello again Tom, I will buy them.
Ken Buhler

1 Replies

365 Views

Last post by Ken Buhler
Mon Oct 06, 2025 5:23 pm
W.T.B. 26/27 touring rear fenders

Last post by schwabd1 « Mon Oct 06, 2025 1:55 pm
Replies: 1
by Lil Teezy » Mon Oct 06, 2025 10:22 am

First post

Looking for some rear fenders for the improved touring car, at least semi-locally, to avoid shipping. “Almost” any condition considered and anywhere within a “reasonable” drive. Here we see the roadster fenders hanging temporarily in place but certainly not fitting well! Thanks! -Chris, in Boulder IMG_2835.jpeg

Last post

Give me a call 419-283-6363. Dave

1 Replies

325 Views

Last post by schwabd1
Mon Oct 06, 2025 1:55 pm
WTB Early Front Spring Perches.

Last post by old_charley « Mon Oct 06, 2025 11:45 am
Replies: 4
by old_charley » Sat Oct 04, 2025 6:08 pm

First post

Hey everyone.

I am in need of good, useable left and right over-the-axle-wishbone front spring perches. With or without flip-top oiler holes would be fine. If you're able to help me out, please contact me through the forum by clicking on my username and emailing me directly that way. Thank you in advance.

Bryan Ostergren

Last post

Thank youy to all who reponded. I have a pair coming from Larry DeBaugh.

4 Replies

571 Views

Last post by old_charley
Mon Oct 06, 2025 11:45 am
FS: Klaxon 6v horn

Last post by South Park Zephyr « Mon Oct 06, 2025 8:14 am
Replies: 11
by TPrez1923@aol.com » Sun Sep 21, 2025 2:50 pm

First post

For sale: Nice looking and sounding 6v Klaxon electric horn. Works good, nice aoogah sound. Asking $65.00 plus $20.00 shipping.

Last post

I sent a message
We are back home and would like to arrange payment

Scott

11 Replies

1302 Views

Last post by South Park Zephyr
Mon Oct 06, 2025 8:14 am
Model T and NRS one piece spindles

Last post by Adam « Sun Oct 05, 2025 7:36 pm
Replies: 6
by Larry Debaugh » Thu Oct 02, 2025 9:38 am

First post

Pair of Model T one piece spindles $700. Single NRS left one piece spindle $300 plus postage will be at Hershey if not sold CM 30-40 Larry

Last post

Those are the odd ‘21/‘22 spindles. Not 1909’s

From Bruce’s Encyclopedia:

IMG_4097.jpeg

IMG_4098.jpeg

6 Replies

962 Views

Last post by Adam
Sun Oct 05, 2025 7:36 pm
driveshaft and housing

Last post by Melba Nolan « Sun Oct 05, 2025 6:46 pm

by Melba Nolan » Sun Oct 05, 2025 6:46 pm

For sale: driveshaft housing with driveshaft $75 plus postage

20250829_183809.jpg 20250829_183841.jpg

0 Replies

356 Views

Last post by Melba Nolan
Sun Oct 05, 2025 6:46 pm
Still looking for

Last post by KimDobbins « Sun Oct 05, 2025 6:29 pm
Replies: 3
by Dollisdad » Thu Oct 02, 2025 12:58 pm

First post

these brake rod supports brackets. IMG_4424.jpeg IMG_4423.jpeg

Last post

There are 2 different versions of this part. Tom, you might check with Gail Rodda, he made some a few years ago.

3 Replies

851 Views

Last post by KimDobbins
Sun Oct 05, 2025 6:29 pm
Free: 3x Iron Intake Manifolds GONE!

Last post by model t americana « Sun Oct 05, 2025 2:15 pm
Replies: 1
by Rodger Erickson » Sun Oct 05, 2025 1:39 pm

First post

Free: 3 cast iron intake manifolds, including 2 that don't have the Ford Script (probably pre-1920.) You pay shipping, which will be $18.20 for a USPS Medium Flat Rate Box.

tinman01.jpg

Thanks for looking!

Last post

Rodger, I’ll take them…Dean model t americana

1 Replies

286 Views

Last post by model t americana
Sun Oct 05, 2025 2:15 pm
Wanted: broken 26-27 gooseneck spare tire carrier

Last post by Brent « Sun Oct 05, 2025 12:41 pm
Replies: 2
by Brent » Thu Oct 02, 2025 3:31 pm

First post

I am looking for the side that attaches to the springs. I only need about 8-12 of the gooseneck. I am building a speedster and have built a custom body. I hate to cut a perfectly good gooseneck. I will be fabricating the rest. I don't know if somebody has one in the broken/junk pile. Thanks for looking.

Last post

I sent you a private message

2 Replies

500 Views

Last post by Brent
Sun Oct 05, 2025 12:41 pm
Trade-Oddball water outlet towards Side Lamps

Last post by RajoRacer « Sun Oct 05, 2025 11:19 am
Replies: 3
by BaltimoreTMan » Sat Oct 04, 2025 11:10 pm

First post

I took this off my 1926 Roadster I’m restoring. I’d like to trade this to someone towards a set of 6561X side lamps for my 1922 touring car. I could sell it too. I’m keeping the fan blades.

I’ll be at Hershey on Wednesday if you would like to meet.

Send me an email if you’re interested.
ashman.organist.95@gmail.com

Last post

I believe it's the remnants of an accessory water circulator.

3 Replies

532 Views

Last post by RajoRacer
Sun Oct 05, 2025 11:19 am
FS *Newly rebuilt 6v starter*

Last post by AdminJeff « Sat Oct 04, 2025 8:06 pm
Replies: 4
by AdminJeff » Sat Jul 05, 2025 11:30 am

First post

Best Possible quality rebuild.
PRICE DROP! $325!!

Now that I make literally every part in these units except the housing and the armatures, I can pass some savings on to everyone.

I have ONE 6v starter for sale that I just finished putting together yesterday.

New field coils with silver soldered post (yes, I now make these)
Bronze bushing...

Last post

Yup! I’m bringing 60# of parts - as much as I could pack in my checked luggage. Hopefully it wont get lost!

4 Replies

1639 Views

Last post by AdminJeff
Sat Oct 04, 2025 8:06 pm
WTB: Gooseneck intake Manifold

Last post by Mark Gregush « Sat Oct 04, 2025 5:01 pm
Replies: 2
by Gleaner » Fri Oct 03, 2025 3:21 pm

First post

Anyone going to Hershey I am needing 2 Gooseneck intake manifolds for 2 1909’s I am working on.
Thanks
Ed

Last post

many call them dog leg.

2 Replies

501 Views

Last post by Mark Gregush
Sat Oct 04, 2025 5:01 pm
FS Martin Parry Cab Panels near Hershey

Last post by JZSlenker « Sat Oct 04, 2025 3:13 pm
Replies: 2
by JZSlenker » Mon Sep 15, 2025 4:03 pm

First post

Several Parry cab sheet metal panels including the cab back. Can be picked up 20 minutes south of Hershey, PA. Payment by PayPal or Cash. Reasonable offers considered.

Last post

Back to top

2 Replies

756 Views

Last post by JZSlenker
Sat Oct 04, 2025 3:13 pm
Wanted - brass sediment bulb and brass (DB) steering wheel spyder

Last post by RajoRacer « Sat Oct 04, 2025 11:26 am
Replies: 9
by Craig E. Luton » Tue Sep 30, 2025 5:21 pm

First post

Looking for a good brass sediment bulb that will not leak. Also looking for a brass (DB) steering wheel spyder. Contact me through the e-mail link below.
Thank you, Craig

Last post

The new repro from Snyder's seems well made - I've installed several and no leaks !

9 Replies

817 Views

Last post by RajoRacer
Sat Oct 04, 2025 11:26 am
Fender transport

Last post by Lil Teezy « Sat Oct 04, 2025 10:33 am

by Lil Teezy » Sat Oct 04, 2025 10:33 am

Hello T lovers! I am wondering if any one from the Colorado front range, or even Albuquerque to Cheyenne will be attending the Texas T party and can return with a set of fenders. One day I will have to make it to that round up but alas, not this year. If transporting front and rears is possible for anyone please give me a shout! I am pricing the...

0 Replies

416 Views

Last post by Lil Teezy
Sat Oct 04, 2025 10:33 am
transmission cover door

Last post by Melba Nolan « Sat Oct 04, 2025 10:15 am
Replies: 5
by Melba Nolan » Thu Jun 20, 2024 7:42 pm

First post

for sale: transmission cover door, good condition $30 each plus postage
20220616_125511.jpg

Last post

reduced price $25 plus postage

5 Replies

2438 Views

Last post by Melba Nolan
Sat Oct 04, 2025 10:15 am
front fender brace

Last post by Melba Nolan « Sat Oct 04, 2025 10:14 am
Replies: 3
by Melba Nolan » Tue Mar 25, 2025 10:34 pm

First post

For sale: front fender bracket. mounts to frame 1926/27 $25 plus shipping
20250325_182315.jpg 20250325_182325.jpg 20250325_182342.jpg

Last post

reduced price $20 plus postage

3 Replies

1799 Views

Last post by Melba Nolan
Sat Oct 04, 2025 10:14 am
crossmember

Last post by Melba Nolan « Sat Oct 04, 2025 10:13 am
Replies: 1
by Melba Nolan » Sat Aug 02, 2025 2:11 pm

First post

For sale: Cross member with brackets $75 plus postage
20250325_155833.jpg 20250325_155845.jpg

Last post

move to top

1 Replies

870 Views

Last post by Melba Nolan
Sat Oct 04, 2025 10:13 am
metal firewall

Last post by Melba Nolan « Sat Oct 04, 2025 10:12 am
Replies: 5
by Melba Nolan » Tue Jun 18, 2024 9:58 pm

First post

For sale: original metal firewall in good condition. alittle surface rust on bottom $50 plus shipping
20210905_131402.jpg

Last post

move to top

5 Replies

2032 Views

Last post by Melba Nolan
Sat Oct 04, 2025 10:12 am
26-27 wishbone

Last post by EricMac « Fri Oct 03, 2025 9:01 pm

by EricMac » Fri Oct 03, 2025 9:01 pm

Does anyone have a good 26-27 wishbone they will be bringing to Hershey? I'm interested in picking one up. I am going to bee in the Green Field GDA 28. Thanks!

0 Replies

396 Views

Last post by EricMac
Fri Oct 03, 2025 9:01 pm
wood for top of truck

Last post by Melba Nolan « Fri Oct 03, 2025 7:12 pm
Replies: 2
by Melba Nolan » Sat Aug 09, 2025 5:26 pm

First post

For sale: New wood for top of truck. bought from Classic Wood Products. $750 plos shipping
20250616_135906 - Copy.jpg

Last post

move to top

2 Replies

1151 Views

Last post by Melba Nolan
Fri Oct 03, 2025 7:12 pm
axle REDUCED PRICE

Last post by Melba Nolan « Fri Oct 03, 2025 7:12 pm
Replies: 4
by Melba Nolan » Thu Jun 26, 2025 10:38 pm

First post

For sale: Front axle with spring perches and bushing $125 plus shipping
20240619_085254.jpg 20240619_085310.jpg

new price $100 plus shipping

Last post

reduced to $75 plus shipping

4 Replies

1789 Views

Last post by Melba Nolan
Fri Oct 03, 2025 7:12 pm
hub puller

Last post by Melba Nolan « Fri Oct 03, 2025 7:09 pm
Replies: 4
by Melba Nolan » Thu Apr 03, 2025 4:37 pm

First post

For sale: rear hub puller #3Z605 with faint Ford script. Very good condition $100 plus postage
20250403_145258.jpg 20250403_145245.jpg 20250403_145411.jpg 20250406_101049.jpg 20250406_101104.jpg

Last post

move to top

4 Replies

1569 Views

Last post by Melba Nolan
Fri Oct 03, 2025 7:09 pm
Sold: A good 1926-1927 Brass Radiator Shell

Last post by GGZ « Fri Oct 03, 2025 2:21 pm
Replies: 1
by GGZ » Fri Oct 03, 2025 2:20 pm

First post

Sold: good 1926-1927 brass radiator shell. These are hard to find in any condition. Just out of a barn . Has not been cleaned. Still has some original lacing. It could be polished and used as-is or would be a great candidate for replating. It's a good one. Take a look at the photos. If you need more, let me know. Price is 265.00 including FedEx...

Last post

More photos

1 Replies

405 Views

Last post by GGZ
Fri Oct 03, 2025 2:21 pm
WTB - Brass steering column support bracket

Last post by RajoRacer « Fri Oct 03, 2025 11:29 am
Replies: 2
by havnfun » Tue Sep 30, 2025 8:22 pm

First post

Howdy,

WTB brass early steering column support bracket non horn IMG_8253.jpeg

Last post

Sorry Joe - must have peddled them all !

2 Replies

448 Views

Last post by RajoRacer
Fri Oct 03, 2025 11:29 am
Leather speedster seat inserts (originals)

Last post by babychadwick « Fri Oct 03, 2025 9:05 am
Replies: 3
by bobster1 » Thu Oct 02, 2025 2:20 pm

First post

Anyone interest in a period correct leather tufted seat insert for use (these are very old and worn) or great for patterns. They have leather laces that were woven into the metal seat bucket to hold then in, really cool design. I bought them at Hershey several years ago and used them for a pattern, now passing them on to anyone out there that may...

Last post

Before shipping out would you consider taking some poster paper and making a tracing for me ?

3 Replies

641 Views

Last post by babychadwick
Fri Oct 03, 2025 9:05 am
Loading Trailer for Hershey 2025

Last post by Dan Hatch « Fri Oct 03, 2025 3:09 am
Replies: 13
by Dan Hatch » Sun Sep 07, 2025 10:33 am

First post

Well that time of the year!!! Thank goodness!!!
Starting to load trailer again.
Some early takeoff or maybe some maybe NOS High Radiator Shells. 14 windshields and or parts, 13/14 coil boxes WITH LIDS, 15 coilboxs, 25 right front fenders will work for 26/27 TT, 21” wheels, nice 14 steering columns, 13 column, 13/14 sidelights and taillights,...

Last post

Early forged end rear radius rods, 14 driveshaft tube, low heads, Australia Ford sign, Safety hubs and housings, Stevens Front Axle inserts, 14 steering columns, needle nose pans, WT steering parts, high metal firewalls, nos 24/25 front fender. 15/16 steering columns. Bid red mailbox, 13/14 sidelights & taillights. Norman Rockwell Ford puzzles,...

13 Replies

2015 Views

Last post by Dan Hatch
Fri Oct 03, 2025 3:09 am
FOR SALE: Rear Fenders for 1926-7 Touring or Sedan

Last post by GatorsModelT « Thu Oct 02, 2025 11:40 pm

by GatorsModelT » Thu Mar 13, 2025 10:35 pm

FOR SALE: Rear Fenders for 1926-7 Touring or Sedan. $350.00 for the Pair. Can deliver to TEXAS T PARTY in Marshall, TX next week. Let me know any other parts needs you may have and I may be able to help you. Contact Eric Gator Gould here on MTFCA Classifieds website.

0 Replies

1197 Views

Last post by GatorsModelT
Thu Oct 02, 2025 11:40 pm
FOR SALE: 1926-27 Front Fenders

Last post by GatorsModelT « Thu Oct 02, 2025 11:33 pm

by GatorsModelT » Thu Mar 13, 2025 10:24 pm

FOR SALE: Front Fenders for 1926-7 Model T. One is a New Rootieb Fender and the other is an original. Selling as a PAIR. Can deliver to TEXAS T PARTY in Marshall, TX next Week. $900.00 Let me know if you have other parts needs I may help with. Contact Eric Gator Gould here on the MTFCA Classifieds Website.

0 Replies

1324 Views

Last post by GatorsModelT
Thu Oct 02, 2025 11:33 pm
FS fan governor

Last post by Karl Von Neumann « Thu Oct 02, 2025 9:30 pm
Replies: 3
by Karl Von Neumann » Fri Sep 26, 2025 2:10 pm

First post

Fan governor off a power unit or something kinda crusty 20$ plus the ride

Last post

I'm inquiring for a friend. Can I have an e-mail address please ?

You can just click on my name and hit send email

3 Replies

657 Views

Last post by Karl Von Neumann
Thu Oct 02, 2025 9:30 pm
Wanted, 09/10 pass side spindle.

Last post by Michael Paul « Thu Oct 02, 2025 8:16 pm
Replies: 2
by Michael Paul » Wed Oct 01, 2025 9:02 pm

First post

Hi all, I'm in need of a right side one piece spindle.
Any help appreciated.
Mike

Last post

I'm a little concerned what spindle means in Scamlandia? Anyone brave enough to click on the link?

2 Replies

346 Views

Last post by Michael Paul
Thu Oct 02, 2025 8:16 pm
I need a couple of pictures, please

Last post by RajoRacer « Thu Oct 02, 2025 4:34 pm
Replies: 1
by Bill Everett » Thu Oct 02, 2025 1:28 pm

First post

I need a couple of pictures of each of the front hub and the rear hub for a ‘12. One of each side of each hub would be great.

Please text them to me at 901-496-8795.

Thank you.

Bill Everett

Cell: 901-496-8795

Last post

Bill - how come you didn't reply regarding the 10/13 block you were wanting ????????????????

1 Replies

453 Views

Last post by RajoRacer
Thu Oct 02, 2025 4:34 pm
Generator FS

Last post by love2T's « Thu Oct 02, 2025 9:20 am
Replies: 2
by love2T's » Sun Sep 28, 2025 6:50 am

First post

Selling for a friend.
Generator...use for core or add your own gear and cutoff and install it. Last chance to buy with free trip to Hershey. $50.
Email me through my profile to arrange payment and Hershey details. Must be bought by Thursday 10/2 or I won't be able to get it to the transporter in time. Thanks.

Last post

Tomorrow is the last chance to buy, to enable me to get this to Joe the courier to Hershey!

2 Replies

509 Views

Last post by love2T's
Thu Oct 02, 2025 9:20 am
2 nice heads FS

Last post by love2T's « Thu Oct 02, 2025 9:19 am
Replies: 3
by love2T's » Mon Sep 22, 2025 11:35 am

First post

Time's running out quick til Hershey! Selling for a friend.
Come n get your nice high head that you need...a '24 & '26...was only replaced by H.C. heads is why they're FS.
Can send to Hershey. $100 each... O.B.O.
Pls reply via EMAIL link on my profile for payment details etc. Thanks.

Last post

Tomorrow is last chance to buy to enable me to deliver them to Joe the courier to Hershey!

3 Replies

790 Views

Last post by love2T's
Thu Oct 02, 2025 9:19 am
for sale 26/27 large brake rear end housings w/ new brake parts

Last post by bobster1 « Thu Oct 02, 2025 5:29 am
Replies: 2
by bobster1 » Tue Sep 23, 2025 8:20 am

First post

26/27 large brake rear end housing with all new brake parts for sale. The housings have been cleaned, sand blasted and epoxy primed. They will come with new brake cams, bushings, linings, riveting tool, brake shoes, rear spring bushings and flip top oilers. $300 Available for pickup in Richmond, VA or Hershey Swap meet. Thanks, Bob

Last post

Price reduced....... $250, Come check them out in Hershey!

2 Replies

479 Views

Last post by bobster1
Thu Oct 02, 2025 5:29 am
Trunk Key

Last post by ModelTWoods « Thu Oct 02, 2025 12:35 am
Replies: 3
by Wingnut » Sun Sep 28, 2025 5:44 pm

First post

Say... does anyone happen to have an extra loose trunk key for a '26 coupe? I only have one and you know what they say if one is good two is better. Lemme know, Wingnut

Last post

Dan, did you get my email or PM through the MTFCA ? Contacting about a trunk key.

3 Replies

596 Views

Last post by ModelTWoods
Thu Oct 02, 2025 12:35 am
1911/ 12 Heinz coil box and new 09/11 timer

Last post by Larry Debaugh « Wed Oct 01, 2025 7:49 pm
Replies: 4
by Larry Debaugh » Tue Sep 30, 2025 5:55 pm

First post

1911-12 Heinz coil box with restored coils done by RV Anderson, $1500, new 09-11 timer $600 will have these at Hershey CM 30-40 Larry

Last post

This Coilbox and timer are sold … have others of both larry

4 Replies

647 Views

Last post by Larry Debaugh
Wed Oct 01, 2025 7:49 pm
Early Brass Speedometers

Last post by Bill Everett « Wed Oct 01, 2025 6:55 pm
Replies: 7
by Larry Debaugh » Tue Sep 30, 2025 5:35 pm

First post

I have 100’s of speedometers of all manufacturers restored and unrestored, mounting brackets, swivels, gears and cables. Will bring some to Hershey, CM 30-40 , what do you need. Larry

Last post

E-Mail sent.

7 Replies

814 Views

Last post by Bill Everett
Wed Oct 01, 2025 6:55 pm
Early Kingston and Holly Carbs

Last post by michaelb2296 « Wed Oct 01, 2025 4:11 pm
Replies: 1
by Larry Debaugh » Tue Sep 30, 2025 8:57 pm

09-10 Kingston and Holly Carbs, will bring these to Hershey CM 30-40 have many more at home Larry. 1910-11 Kingston $1800, 1909-10 $1700, 1912 Holly $400, 1910 Holly $3000 all brass, 1910 Holly $2500 pot metal cap. Many others 09-15, send a note and I’ll send pictures, been trying for 2 hours in any direction possible… I’m toast… Larry

1 Replies

419 Views

Last post by michaelb2296
Wed Oct 01, 2025 4:11 pm
SOLD hyatts

Last post by Karl Von Neumann « Wed Oct 01, 2025 1:26 pm

by Karl Von Neumann » Wed Oct 01, 2025 1:26 pm

4 Hyatt bearings measurements are in the pictures cages are tight will be posting more later in the week as I get them clean price is 30$ ea plus shipping sold sold sold

0 Replies

457 Views

Last post by Karl Von Neumann
Wed Oct 01, 2025 1:26 pm
FS Hand Crank Coil Tester (SOLD)

Last post by ThreePedalTapDancer « Wed Oct 01, 2025 1:17 pm
Replies: 2
by ThreePedalTapDancer » Tue Sep 09, 2025 12:33 pm

First post

Original hand crank coil tester. Complete, ready for restoration. 800.00, pick up only, too fragile and heavy to ship reasonably unfortunately.

IMG_3797.jpeg

Last post

Ready to be picked up, come and get it

2 Replies

1033 Views

Last post by ThreePedalTapDancer
Wed Oct 01, 2025 1:17 pm
FREE axle housings

Last post by love2T's « Wed Oct 01, 2025 8:45 am
Replies: 7
by Karl Von Neumann » Wed Jun 11, 2025 12:18 pm

First post

Come and getting them before the scrapper does 2 pairs I parted them out I've got a pile of whole axles don't need empty housings sitting around located pleasant prairie wisconsin. I would have to be heavily bribed to ship any of these

Last post

Problem is location, location, location. Sadly since you're way up north of Chi-town and Milwaukee with lots of traffic in those areas but along a nice lake might make it hard for people to just pop on over LOL. Shipping this stuff isn't that hard, short of cleaning any grease maybe left on them, most shippers will take them as is with a shipping...

7 Replies

2284 Views

Last post by love2T's
Wed Oct 01, 2025 8:45 am
T Parts and other interesting stuff!

Last post by bobster1 « Wed Oct 01, 2025 6:50 am

by bobster1 » Wed Oct 01, 2025 6:50 am

I hope everyone will be in Hershey! I’ll have my usual spaces in the Red Field, RWI 18,19 &20. I’m just a few rows back from the Horseless Carriage Tent. Items will be for sale at Hershey and what doesn’t sell will be listed here on the forum later. Thanks, Bob

0 Replies

619 Views

Last post by bobster1
Wed Oct 01, 2025 6:50 am
NEEDED, ignition switch for ‘24 T.

Last post by RajoRacer « Tue Sep 30, 2025 9:33 pm
Replies: 3
by HoosierFordMan » Sun Sep 28, 2025 2:03 pm

First post

Needing an ignition switch for a 24 T. Lang’s and Snyders are both on back order and I’m stuck until I replace mine. Thanks!

Last post

I sent you some photos & prices the other day !

3 Replies

413 Views

Last post by RajoRacer
Tue Sep 30, 2025 9:33 pm
FS Allen HCCT

Last post by Schrep771 « Tue Sep 30, 2025 8:33 pm

by Schrep771 » Tue Sep 30, 2025 8:33 pm

Allen HCCT- Original condition, complete with gauges (needing restoration) and hard to find crank handle. Restore or clean up and use. Base will need repair as corner is broken and missing. (See pics) Will bring to Hershey if serious interest. $550. Call or text: 3one55two5six3eight5

0 Replies

445 Views

Last post by Schrep771
Tue Sep 30, 2025 8:33 pm
Early Kingston and Holly Carbs

Last post by Larry Debaugh « Tue Sep 30, 2025 7:08 pm

by Larry Debaugh » Tue Sep 30, 2025 7:08 pm

09-15 Kingston and Holly Carbs, will bring these to Hershey, many more at home of all years . CM 30-40 Larry

0 Replies

362 Views

Last post by Larry Debaugh
Tue Sep 30, 2025 7:08 pm
1908-12 New manufacture differential housings

Last post by Quickm007 « Tue Sep 30, 2025 11:40 am
Replies: 1
by Eric Edwards » Wed Sep 24, 2025 10:38 am

First post

No rivet 6 rivet or 12 clamshell housings
Available Silicon steel centre sections on original tubes and backing plates
No sagging no rivet leaks exceptional performance workmanship guaranteed
One set only available This is the last run
$2500 USD plus freight Worldwide shipping available pics available
Eric Edwards 705 828 5405

Last post

Hi can you post a picture please?

Thanks

1 Replies

631 Views

Last post by Quickm007
Tue Sep 30, 2025 11:40 am
Disassembled Sept of 24 parts car

Last post by Todd Touchberry « Tue Sep 30, 2025 8:00 am
Replies: 2
by Todd Touchberry » Wed Sep 17, 2025 10:52 am

First post

After making the video, I'm pretty much finished with this car. I'm keeping the front wishbone and MAYBE the hood (with dimples )
Let me know if you see anything that you need.

Last post

Hi Mr Touchberry--

I saw the video. I'm in Florence, SC and would be able to make Sumter easily. I have the option of giving the rest of the car a spot to stay in one piece whilst rebuilding it; if you'd be interested in turning her loose I'd like to go for it.
Yes I'm new to the Forum; I've not been active for the excellent reason I don't own...

2 Replies

897 Views

Last post by Todd Touchberry
Tue Sep 30, 2025 8:00 am
Swap: Perfecto or early Ruckstell shift handle for later

Last post by JvanMaanen « Mon Sep 29, 2025 11:31 pm
Replies: 4
by KWTownsend » Wed Aug 20, 2025 8:17 pm

First post

I have what I believe to be a Perfecto or early Ruckstell shift handle. I am looking for a later Ruckstell style shift handle.

The shifter I have uses three mounting bolts at the ball cap. The rod (not included) mounts at the same relative location as on a Ruckstell, but the shaft of the handle comes up from the mounting location, which puts the...

Last post

Keith,

surplus to my needs, I'll pm you

Jim

4 Replies

1323 Views

Last post by JvanMaanen
Mon Sep 29, 2025 11:31 pm
FS KRW Combination Machine and Stand

Last post by kevinf « Mon Sep 29, 2025 6:35 pm

by kevinf » Mon Sep 29, 2025 6:35 pm

For Sale, KRW Combination Machine and engine stand head. I don't know a lot about this machine, the gearbox has been replaced with a right angle drive box and looks like it should work. I have an original gearbox that will go with. I have a rack with 10 boring bars/reamers, and I believe the frames for the Model A and Model T engines. I have two...

0 Replies

496 Views

Last post by kevinf
Mon Sep 29, 2025 6:35 pm
FS: '17-'23 Fenders, front and rear, NOS and excellent original -- Hershey pick-up available.

Last post by Walter Higgins « Mon Sep 29, 2025 6:28 pm
Replies: 5
by Walter Higgins » Mon Sep 15, 2025 8:31 pm

First post

FS: '17-'23 Fenders, NOS and excellent original -- Hershey pick-up available.

Nice nice fenders. Fronts $850 for the pair, the rear is $400, or mix and match. Let's talk.

Email me through the system for and we'll swap phone numbers.

Hershey delivery available. Local pick-up location 17350, Gettysburg, PA area. Pick up at Hershey and save....

Last post

One more time. Loading the truck. I'll bring them with a commitment to buy, otherwise, I'm going to use the space for other things. All three fenders are still available. Thanks!

5 Replies

889 Views

Last post by Walter Higgins
Mon Sep 29, 2025 6:28 pm
WTB Solid Hyatt Bearings

Last post by Karl Von Neumann « Mon Sep 29, 2025 10:09 am
Replies: 2
by TillieTheTouring » Sun Sep 28, 2025 10:08 pm

First post

I am in need of a pair of serviceable Hyatt rear axle bearings for my '24. I'm looking for them to measure .495 and above and be non-twisting, tight, and serviceable. Thank you!

Last post

I may have some I will check later

2 Replies

440 Views

Last post by Karl Von Neumann
Mon Sep 29, 2025 10:09 am
WTB 26/27 coil box lid

Last post by Randylbarnes « Sun Sep 28, 2025 9:41 pm
Replies: 2
by Randylbarnes » Sun Sep 28, 2025 12:42 pm

First post

Looking for a 1927 / 1927 coil box lid.

Last post

No longer needed. I found one

2 Replies

355 Views

Last post by Randylbarnes
Sun Sep 28, 2025 9:41 pm
Hayes rim

Last post by Chris Haynes « Sun Sep 28, 2025 7:31 pm
Replies: 4
by Melba Nolan » Thu Jul 03, 2025 7:45 pm

First post

For sale Hayes rim $100 plus shipping

20250324_141159.jpg 20250322_184948.jpg 20250322_184855.jpg

Last post

Hayes, not Haynes.

4 Replies

2018 Views

Last post by Chris Haynes
Sun Sep 28, 2025 7:31 pm
Used Acetylene Accessory Flint Strikers $80 / Pr

Last post by ThreePedalTapDancer « Sun Sep 28, 2025 4:57 pm
Replies: 2
by Rodger Erickson » Sun Jul 27, 2025 11:14 pm

First post

FS: Pair of flint strikers for acetylene burners. Some guys like to accessorize their gas headlights with these, although I'm pretty sure they were intended for interior lighting. These look to be in good shape but the flints are long gone. These strikers are better quality than most of the ones I've seen. $80 for the pair not including shipping....

Last post

They made many different types for automobiles. Here is a link to previous discussion

2 Replies

1066 Views

Last post by ThreePedalTapDancer
Sun Sep 28, 2025 4:57 pm
'26 TT parts for sale

Last post by FM2102 « Sun Sep 28, 2025 3:41 pm
Replies: 2
by FM2102 » Wed Sep 17, 2025 12:31 pm

First post

Howdy Boys, I am in Make me an offer mode. Differentials, radiator, running boards, fenders, C cab, steel cab, etc. Look this stuff over and make an offer. I won't price them. If I agree on your offer, we'll make a deal. And they are going cheap! Pendleton, OR. Thanks guys!

Last post

Just the one that is on the cab. Probably won't sell it just yet, unless you want the whole cab. Thanks.

2 Replies

777 Views

Last post by FM2102
Sun Sep 28, 2025 3:41 pm
FS Unused Repop Ignition Switch Plates 1913-15 $10 ea.

Last post by Rodger Erickson « Sun Sep 28, 2025 12:39 pm
Replies: 2
by Rodger Erickson » Sun Sep 28, 2025 9:12 am

First post

FS: Brass etched Auto Synchron' ignition switch plates for 1913-1915 Model T Ford Coil Boxes. I'm quite sure these were originally sold by the Greenland Company in the late 1960's or early 1970's. They are decent copies but not exactly perfect, you may have to do a little filing to make them fit perfectly. Asking $10 each.

tswpl01.jpg

Thanks...

Last post

Spoken for. Thanks MTFCA.

2 Replies

466 Views

Last post by Rodger Erickson
Sun Sep 28, 2025 12:39 pm
WTB : Belt Driven Alternator

Last post by RajoRacer « Sun Sep 28, 2025 12:25 pm
Replies: 6
by ModelTWoods » Sat Sep 27, 2025 6:01 pm

First post

Anyone have a belt driven alternator that they aren't using? I want to buy a new or good used Texas T Parts external belt driven alternator, either 6 or 12 volt. Must be complete kit from crank pulley, belt, alternator, and mounting brackets.

Last post

This is the one I installed -

6 Replies

615 Views

Last post by RajoRacer
Sun Sep 28, 2025 12:25 pm
Metal ring that fits in wood felloe valve stem hole?

Last post by CALLEN1234 « Sun Sep 28, 2025 11:01 am
Replies: 7
by DHort » Fri Sep 26, 2025 3:47 pm

First post

Does anyone know if Stutzman puts the ring in the valve stem hole or do you need to purchase it somewhere?
This is for a wood felloe.

Last post

The hubs and rims that I took to Stutzman were painted.

7 Replies

742 Views

Last post by CALLEN1234
Sun Sep 28, 2025 11:01 am
FS: "Antique Auto" Dash Plaques $10 ea.

Last post by Rodger Erickson « Sun Sep 28, 2025 3:20 am

by Rodger Erickson » Sun Sep 28, 2025 3:20 am

FS: Antique Auto dash plaques or dash plates, etched from thin gauge brass, approx 2 1/2 x 4 1/2. I believe these were originally distributed by the Greenland Company in the late 1960's or early 1970's. Also a brass Model T Club dash plaque. $10 each, not including shipping.

antq01.jpg

antq02.jpg

Thanks for looking!

0 Replies

559 Views

Last post by Rodger Erickson
Sun Sep 28, 2025 3:20 am
Books "The Model T Ford Car" by Victor Page $5-$20

Last post by Rodger Erickson « Sun Sep 28, 2025 2:05 am

by Rodger Erickson » Sun Sep 28, 2025 2:05 am

FS: 3 Hardcover Copies of The Model T Ford Car - A Complete Reference on the Universal Car by Victor Page 1915, 1917, and 1920 editions. Very used. Asking $20 for the 1915 edition, $10 for the 1917 edition, and $5 for the faded 1920 edition, not including shippping.

pagemt01.jpg

pagemt02.jpg

Thanks for looking!

0 Replies

381 Views

Last post by Rodger Erickson
Sun Sep 28, 2025 2:05 am
Free: 1920-25 Stewart Speedometer Very Rough Parts only

Last post by Rodger Erickson « Sat Sep 27, 2025 6:09 pm
Replies: 1
by Rodger Erickson » Sat Sep 20, 2025 12:53 pm

First post

Free: what's left of a Stewart dash-mount speedometer, appropriate for a 1920-1925 Model T Ford, if I'm not mistaken. It was left in a bucket that filled up with water for several months, resulting in a speedometer that is mostly junk. Maybe some of the brackets, etc., or brass gears can be salvaged I don't know. It's yours if you pay for...

Last post

Spoken for. Thanks MTFCA.

1 Replies

517 Views

Last post by Rodger Erickson
Sat Sep 27, 2025 6:09 pm
fs TIMERS AND ROLLERS

Last post by Tinner12 « Sat Sep 27, 2025 4:53 pm
Replies: 3
by Tinner12 » Fri Sep 26, 2025 9:39 am

First post

MISC timers and rollers One Ford timer and roller, Anco, Milwaukee All for $100 includes shipping to USA

Last post

Timers sold Thank you Ed

3 Replies

565 Views

Last post by Tinner12
Sat Sep 27, 2025 4:53 pm
4 door going to hershey

Last post by KenHaverhill « Sat Sep 27, 2025 2:01 pm

by KenHaverhill » Sat Sep 27, 2025 2:01 pm

I am bringing a 26 4 door to hershey its a project i will never get to .interior is out so you can get a good look at the bones the car is in primer and i have a clear Massachusetts title in my name .ready to restore. Will be at spot cw10 monday after lunch. First $1600 takes it away.i can text pictures if interested

0 Replies

550 Views

Last post by KenHaverhill
Sat Sep 27, 2025 2:01 pm
FS Pair of 1909-10 5 1/2" Front Hubs

Last post by Nikko012 « Sat Sep 27, 2025 10:09 am
Replies: 5
by BigAl » Tue Sep 23, 2025 11:53 am

First post

Pair of CNC made 1909-1910 5 1/2 front hubs. These reproductions are primed and ready to paint. Asking $475 for the pair plus shipping and optional insurance. AL '

Last post

I also would buy a pair of hubs that look that good for my 1910 roadster. I hope we can make this happen! Thanks Ray

5 Replies

795 Views

Last post by Nikko012
Sat Sep 27, 2025 10:09 am
For Sale: Dog Bone Radiator Caps

Last post by micshotrodgarage « Sat Sep 27, 2025 9:38 am
Replies: 1
by Ed Fuller » Thu Sep 25, 2025 10:29 pm

First post

For sale, 2 dog bone radiator caps.

SOLD #1 cap is brass, should polish up nice. $35 plus $10 shipping in the U.S.

SOLD #2 cap is either aluminum or pot metal. Not sure which. $25 plus $10 shipping in the U.S.

IMG_7785.jpeg

IMG_7783.jpeg

IMG_7784.jpeg

Last post

Hi Ed, Will these caps thread on a T radiator.

1 Replies

533 Views

Last post by micshotrodgarage
Sat Sep 27, 2025 9:38 am
Everything you see… $6000

Last post by frontyboy « Fri Sep 26, 2025 11:42 pm
Replies: 2
by Stephen1915 » Thu Sep 25, 2025 9:30 pm

First post

Selling this for a customer.

Speedster project utilizing a 14/15 Dodge brothers Frame with a T subframe for mouthing the motor. T rear end, Essex front end. Buffalo wire wheels and reproduction hubs and hubcaps. Livingston V Radiator. Have decent Firestone tires for rear. More details and items not listed call for more information. May part out....

Last post

I would be interested in the radiator. what are you asking for it. I live in Seattle and shipping for the whole project would be prohibitive for me.
Frontyboy
Call me at 206-919-1949 west coast time

I have a a1915 roadster with a Gallivan dual overhead cam engine very fast and very loud. I just purchased a1914 older restoration Fronty single cam...

2 Replies

972 Views

Last post by frontyboy
Fri Sep 26, 2025 11:42 pm
Transmission drums at Hershey

Last post by DNolting « Fri Sep 26, 2025 9:47 pm
Replies: 2
by DNolting » Wed Sep 10, 2025 9:39 pm

First post

I am starting to pack for Hershey. Place your orders now to pick up your new transmission drums at Hershey and save shipping.
Our new spaces are OBC 32, 33 & 34. Near light pole 114.
Dave’s Restoration & Machine
Thank You
Dave

Last post

to the top

2 Replies

814 Views

Last post by DNolting
Fri Sep 26, 2025 9:47 pm
For Sale: HCCT Project

Last post by 1925 Touring « Fri Sep 26, 2025 8:41 pm
Replies: 2
by Ed Fuller » Mon Sep 22, 2025 9:31 pm

First post

Years ago on the forum there quite a few people putting together home built Hand Crank Coil Testers and posting plans for making your own.

I started collecting pieces to build one and got this far until I stalled out on the project. I recently picked up an Allen tester so I won’t be needing this one.

Here is what’s included:

-Fabricated...

Last post

Hi Ed,
I sent you an email.
Thanks, Austin.

2 Replies

704 Views

Last post by 1925 Touring
Fri Sep 26, 2025 8:41 pm
TN Auction

Last post by Dan Hatch « Fri Sep 26, 2025 7:20 pm

by Dan Hatch » Fri Sep 26, 2025 7:20 pm

Saw some fine ModelT cars and a few A too today. You have never seen so many Carburetors in your life. All look like rebuilt by RP. Tomorrow is the day. Let the fun begin!

0 Replies

681 Views

Last post by Dan Hatch
Fri Sep 26, 2025 7:20 pm
For Sale: Valve Stem Covers

Last post by Ed Fuller « Fri Sep 26, 2025 6:50 pm
Replies: 1
by Ed Fuller » Sat Sep 20, 2025 7:15 pm

First post

Lot of used valve stem covers and hardware.

SOLD $25 for all plus $10 shipping in the U.S.

IMG_7739.jpeg

IMG_7738.jpeg

IMG_7737.jpeg

IMG_7736.jpeg

Last post

SOLD

1 Replies

545 Views

Last post by Ed Fuller
Fri Sep 26, 2025 6:50 pm
WTB High Hood Sides

Last post by Model T Mark « Fri Sep 26, 2025 11:35 am

by Model T Mark » Fri Sep 26, 2025 11:35 am

WTB a pair of hood sides with good hinge loops and not wore through where the clips set. Mine were lost unfortunately. Trying to do a high point show car with all original sheetmetal. Please sent me pictures of what you may have available through this website. Looking for 23-25 not 26-27.
Thanks you. Stay safe. Mark Eyre Battle Creek Michigan.

0 Replies

409 Views

Last post by Model T Mark
Fri Sep 26, 2025 11:35 am
Model A Connecting Rods: SOLD

Last post by 38 coupe « Fri Sep 26, 2025 6:02 am
Replies: 1
by Scott C. » Thu Sep 18, 2025 9:38 pm

First post

I have 8 Model A connecting rods, does anyone have a need for these?

IMG_3749.jpg

Last post

I could use them, I sent a message through the forum.

1 Replies

542 Views

Last post by 38 coupe
Fri Sep 26, 2025 6:02 am
8 inch brake drums available?

Last post by DHort « Fri Sep 26, 2025 2:17 am
Replies: 2
by DHort » Sat Sep 20, 2025 8:28 pm

First post

Is anyone still making brake drums? I need one that has 5 holes and not 6 holes. Or a blank that I could have the holes cut in. I think I got the last set from McLarens.

Last post

Found some at Birdhaven.

Thank you Bill.

2 Replies

627 Views

Last post by DHort
Fri Sep 26, 2025 2:17 am
............

Last post by GGZ « Thu Sep 25, 2025 5:57 pm
Replies: 6
by GGZ » Mon Jul 14, 2025 9:58 am

First post

...............

Last post

...................

6 Replies

1997 Views

Last post by GGZ
Thu Sep 25, 2025 5:57 pm
More Wide Track parts FS at Hershey

Last post by DustySpokes « Thu Sep 25, 2025 5:31 pm
Replies: 1
by Dan Hatch » Thu Sep 25, 2025 2:07 pm

First post

Loading some more Wt parts for Hershey.
Tie Rod and Drag Link with coarse threads, not sure of year.
Good WT Tie Rod, will work for all year WT.
Set of good 13 WT Fenders
One extra rear WT 13/14 Fender.
CR33-38 Dan

Last post

Out of curiousity, what is your ask on the WT tie rod and drag link ? -Dusty

1 Replies

362 Views

Last post by DustySpokes
Thu Sep 25, 2025 5:31 pm
1912 DB transmission FS

Last post by Dan Hatch « Thu Sep 25, 2025 3:54 pm
Replies: 2
by Dan Hatch » Thu Sep 25, 2025 8:40 am

First post

I have a complete early transmission. Date on the main shaft is 6-16-12. All visible parts are marked DB. If someone is interested I can bring it to Hershey. Not bringing it unless someone wants it. I’ll post a picture later. Email me by forum. Dan

Last post

Pictures.
IMG_4653.jpeg
IMG_4655.jpeg
IMG_4657.jpeg
Last picture the DB is stamped like the marking on the brass steering column quadrant.
Email me by forum.

2 Replies

513 Views

Last post by Dan Hatch
Thu Sep 25, 2025 3:54 pm

New Topic

10414 topics

Page 12 of 105
- Jump to page:
Previous
1
…
10
11
12
13
14
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum