Classifieds - Parts - Page 13

Classifieds - Parts

New Topic

10399 topics

Page 13 of 104
- Jump to page:
Previous
1
…
11
12
13
14
15
…
104
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

83836 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

WTB original Ford script key

Last post by J1MGOLDEN « Tue Sep 23, 2025 3:59 pm
Replies: 1
by r4rabbitx » Mon Sep 22, 2025 8:24 am

First post

Send a dm if you have a 61 Ford script key for sale

Last post

I only have 1 original that looks like NOS Silver Plated, but I do not have a close-up camera.

What are they worth now?

Ford 61 New Key.jpg

Ford 61 Side.jpg

1 Replies

618 Views

Last post by J1MGOLDEN
Tue Sep 23, 2025 3:59 pm
side curtain rods

Last post by Melba Nolan « Tue Sep 23, 2025 2:04 pm
Replies: 4
by Melba Nolan » Sat Nov 16, 2024 12:16 pm

First post

For sale: new side curtain rods (2 pieces) $20 plus postage

Last post

move to top

4 Replies

3591 Views

Last post by Melba Nolan
Tue Sep 23, 2025 2:04 pm
rim

Last post by Melba Nolan « Tue Sep 23, 2025 1:46 pm

by Melba Nolan » Tue Sep 23, 2025 1:46 pm

For sale: Hayes rim $100 plus shipping

0 Replies

355 Views

Last post by Melba Nolan
Tue Sep 23, 2025 1:46 pm
air pump

Last post by Melba Nolan « Tue Sep 23, 2025 1:38 pm

by Melba Nolan » Tue Sep 23, 2025 1:38 pm

For sale: air pump to pressurize gas tank $150 plus postage

20250908_185200.jpg 20250908_185156.jpg

0 Replies

337 Views

Last post by Melba Nolan
Tue Sep 23, 2025 1:38 pm
1915 rear end FS

Last post by Dan Hatch « Tue Sep 23, 2025 1:18 pm

by Dan Hatch » Tue Sep 23, 2025 1:18 pm

Got a complete 15 rear end. Driveshaft, Radius Rods, brake rods. Came out from under my late 15 Touring to install Ruckstell.
Has smooth backing plates. Can bring to Hershey. Email me if interested by forum. Do it fast loading trailer, may run out of room.

0 Replies

416 Views

Last post by Dan Hatch
Tue Sep 23, 2025 1:18 pm
F/S Perfecto /Looking for ride to Hershey

Last post by Craig Leach « Tue Sep 23, 2025 12:17 pm
Replies: 4
by Craig Leach » Thu Aug 21, 2025 11:50 pm

First post

Selling for a friend Perfecto two speed rear end, NO SHIFTER has had work done on it but have no info as to what was done. there is writing on
it that seem to be instructions for installer. Has noticeable new parts. and is clean as it has not been run. Has 3.25:1 ring & pinion, drive shaft
that seems to have had work on it also & is as clean as...

Last post

Please move back to the top

4 Replies

1625 Views

Last post by Craig Leach
Tue Sep 23, 2025 12:17 pm
KRW tools to Hershey

Last post by Dan Hatch « Tue Sep 23, 2025 11:54 am

by Dan Hatch » Tue Sep 23, 2025 11:54 am

Thinking of parting out a combination machine to Hershey. Anyone need anything? Email me by forum. Dan

0 Replies

429 Views

Last post by Dan Hatch
Tue Sep 23, 2025 11:54 am
26 / 27 Ruckstell housing

Last post by Lil Teezy « Tue Sep 23, 2025 11:47 am
Replies: 1
by Randylbarnes » Mon Sep 22, 2025 12:10 pm

First post

I picked up a Ruckstell for my 26 that I am building. From what I understand I can swap over the stock housing to retain the large brakes. I am looking for a Ruckstell housing with a large brake backing plate.

Last post

Hi Randy! Have one just up the road. Just sent you an email too. Feel free to give me a shout! -Chris, in Boulder

1 Replies

415 Views

Last post by Lil Teezy
Tue Sep 23, 2025 11:47 am
FS Brass Bermuda Bell (SOLD)

Last post by ThreePedalTapDancer « Mon Sep 22, 2025 7:49 pm
Replies: 3
by ThreePedalTapDancer » Thu Sep 18, 2025 1:55 pm

First post

Original T era brass Bermuda Bell. This is an original bell, not a reproduction. Excellent condition, nice polished brass with no dents or cracks. Works great, very loud “Ding Dong!” when brass foot plunger is depressed. 5.5 diameter, solid brass. I have one on each of my T’s, they are lots of fun. 275 includes shipping.

IMG_4464.jpeg

Last post

It’s yours, email sent

3 Replies

588 Views

Last post by ThreePedalTapDancer
Mon Sep 22, 2025 7:49 pm
FS KW Brass Master Vibrator Switch

Last post by rickd « Mon Sep 22, 2025 7:04 am
Replies: 6
by ThreePedalTapDancer » Wed Sep 10, 2025 12:56 pm

First post

Nice brass KW Master Vibrator switch with key. Nice crisp lettering. Ready to mount and use. 50 includes shipping.

IMG_4421.jpeg

Last post

Pic of my KW coil box ignition switch. The internals are the same as Eds' master vibrator but the switch internal connection lever is designed to turn by the Yale/KW key versus the normal round ignition key. Nice switch Ed, the patent date on my switch is the same as yours. Also of note the internal tumbler of these switches have a serial number...

6 Replies

951 Views

Last post by rickd
Mon Sep 22, 2025 7:04 am
FS: Klaxon 6v horn

Last post by South Park Zephyr « Mon Sep 22, 2025 2:50 am
Replies: 2
by TPrez1923@aol.com » Sun Sep 21, 2025 2:50 pm

First post

For sale: Nice looking and sounding 6v Klaxon electric horn. Works good, nice aoogah sound. Asking $65.00 plus $20.00 shipping.

Last post

I’d like to purchase the horn, if available

I’m out of town and won’t be back until 10/5.
Can do PayPal if that works

Scott

2 Replies

399 Views

Last post by South Park Zephyr
Mon Sep 22, 2025 2:50 am
Bud vases

Last post by Harvey Bergstrom « Sun Sep 21, 2025 10:27 pm

by Harvey Bergstrom » Sun Sep 21, 2025 10:27 pm

WTB A nice pair of vintage bud vases with original brackets for my ‘26 Tudor.

0 Replies

431 Views

Last post by Harvey Bergstrom
Sun Sep 21, 2025 10:27 pm
For Sale: 3 starter bendix cores

Last post by Model-T-Medic « Sun Sep 21, 2025 7:28 pm
Replies: 2
by Ed Fuller » Sun Sep 14, 2025 4:04 pm

First post

3 starter bendix cores for rebuilding. All appear to need new springs.

SOLD!

$60 plus shipping in the U.S. for the lot of 3.

IMG_7692.jpeg

IMG_7693.jpeg

Last post

I’m interested in these. Please email me at cmize1025@gmail.com

2 Replies

569 Views

Last post by Model-T-Medic
Sun Sep 21, 2025 7:28 pm
Gull wings

Last post by RajoRacer « Sun Sep 21, 2025 6:00 pm
Replies: 8
by Harvey Bergstrom » Fri Sep 19, 2025 5:41 pm

First post

WTB Chrome wide spread gull wings cap for moto meter.
Harvey Bergstrom. (701) 680 eight one one five.

Last post

I sent you an email.

8 Replies

968 Views

Last post by RajoRacer
Sun Sep 21, 2025 6:00 pm
Model T Auto Theft Signal With Key - SOLD

Last post by BE_ZERO_BE « Sun Sep 21, 2025 11:33 am
Replies: 7
by BE_ZERO_BE » Sat Sep 20, 2025 6:25 pm

First post

Model T Auto Theft Signal With Key.

$75.00 OBO Including USPS Priority shipping in lower 48.

IMG_1894.JPG

IMG_1895.JPG

IMG_1896.JPG

Last post

Jay,
Email Sent.
Bob

7 Replies

772 Views

Last post by BE_ZERO_BE
Sun Sep 21, 2025 11:33 am
Another Incomplete Jno Brown 115 Tail Light $45

Last post by Rodger Erickson « Sun Sep 21, 2025 8:24 am

by Rodger Erickson » Sun Sep 21, 2025 8:24 am

FS: A Jno Brown 115 tail light suitable for a 1914 Model T Ford. This one is all steel except for chimney cap and the upper part of the fount. The front door and red lens are missing. There is a lot of surface rust and some pitting, but I don't see any rust-through which is good. On the plus side the metal here is nice and straight, this light...

0 Replies

438 Views

Last post by Rodger Erickson
Sun Sep 21, 2025 8:24 am
For Sale: TT Rear Wheels Hershey Delivery

Last post by andrew o sullivan « Sun Sep 21, 2025 5:30 am
Replies: 1
by Ed Fuller » Sat Sep 20, 2025 6:02 pm

First post

For Sale: Pair of TT rear wheels. Unfortunately, I don’t have any of the rim mounting lugs or hardware. Tires are no good.

SOLD!!!

IMG_7724.jpeg

IMG_7725.jpeg

Last post

ill take them ill be at hershey

1 Replies

359 Views

Last post by andrew o sullivan
Sun Sep 21, 2025 5:30 am
Hershey 2025

Last post by AdminJeff « Sun Sep 21, 2025 4:22 am
Replies: 4
by Model-T-Medic » Fri Sep 19, 2025 5:24 pm

First post

Good afternoon all,
It is a beautiful and hot day in Columbus, Ohio but my thoughts are on the unknown weather and climate of Hershey this year. My name is Chris Mize and I am a model t starter and generator rebuilder. This year my father, Brent Mize, and I will accompanied by Jeff Stevenson of ModelTStarters.com at the Hershey space GBH 17-18....

Last post

I cant wait to meet all you guys at Hershey this year! Chris is bringing fully rebuilt units, I'm bringing voltage Regulators and Starter-generator parts that I manufacture.

Jeff

4 Replies

870 Views

Last post by AdminJeff
Sun Sep 21, 2025 4:22 am
WTB JNO Brown model 100 light

Last post by Steve Thomas « Sat Sep 20, 2025 9:15 pm
Replies: 7
by Steve Thomas » Sun Sep 07, 2025 9:24 pm

First post

Just purchased a ‘12 touring. The RH light is severely damaged. Does anyone have a good one lying on the shelf? This is the square lens model. Thanks in Advance.

Last post

Found replacement. Thanks Donnell

7 Replies

803 Views

Last post by Steve Thomas
Sat Sep 20, 2025 9:15 pm
Pair Jno Brown 110 Cowl Lamps Parts or Restore $85

Last post by Rodger Erickson « Sat Sep 20, 2025 12:29 pm

by Rodger Erickson » Sat Sep 20, 2025 12:29 pm

FS: Another pair of Jno Brown 110 side lights, for parts or restore. These are the later versions, the entire chimney is steel with the exception of the brass tops. At some point they were copper-plated. An earlier fount is attached to one lamp but it is kind of rough. One of the tops is messed up as well. On the plus side there's very little rust...

0 Replies

403 Views

Last post by Rodger Erickson
Sat Sep 20, 2025 12:29 pm
Parts Delivery available to Hershey(Langs)

Last post by slang250 « Sat Sep 20, 2025 11:44 am

by slang250 » Sat Sep 20, 2025 11:44 am

Hershey AACA Fall Meet is approaching. We will be bringing a large array of Used and New Old Stock items to sell as well as your pre-orders. So this means if there is anything you would like to pick up at Hershey, please let us know ahead of time as we will not have reproduction items there. We want to make sure you get everything you need so the...

0 Replies

444 Views

Last post by slang250
Sat Sep 20, 2025 11:44 am
Free: Incomplete Judd-Leland "Victor" Tire Pump GONE!

Last post by babychadwick « Sat Sep 20, 2025 9:23 am
Replies: 1
by Rodger Erickson » Sat Sep 20, 2025 12:43 am

First post

Free: a set of brass tubes and a bottom base from an early brass-era Judd-Leland 3-Barrel Victor Half-a-Minute Tire pump. For parts only. Interesting pump from the brass era. It's yours if you pay for shipping.

3pump02.jpg

3pump01.jpg

3pump03.jpg

Thanks for looking!

Last post

Still available? If so I'm interested, shipping would be to 38340

1 Replies

373 Views

Last post by babychadwick
Sat Sep 20, 2025 9:23 am
1912 Holly carb.

Last post by Larry Debaugh « Fri Sep 19, 2025 10:06 pm
Replies: 1
by Larry Debaugh » Wed Sep 17, 2025 10:04 am

First post

1912 Holly Carb. Had a crack in the bowl that was silver soldered, great condition with a perfect float. $400 Have many 09-13 Holly ,Kingstons and early parts going to Hershey CM 34-40. What do you need. Larry Debaugh

Last post

Carburetor is sold, have others if interested… larry

1 Replies

534 Views

Last post by Larry Debaugh
Fri Sep 19, 2025 10:06 pm
SOLD accessory spring parts

Last post by BHarper « Fri Sep 19, 2025 3:23 pm
Replies: 4
by Karl Von Neumann » Tue Sep 16, 2025 10:50 am

First post

See something you need of want make an offer beer money and the shipping they are going to the scrap yard beging of October

Last post

Hi Karl,

I acknowledge that Scott (South Park Zephyr) has reached out to you before me and I don't know if he wants all of the spring parts or only some of them. I have interest in the ones circled in red in the attached picture if Scott doesn't want them. I wonder if they might fit in a Flat Rate USPS box.
Bill Harper
Keene, New Hampshire...

4 Replies

630 Views

Last post by BHarper
Fri Sep 19, 2025 3:23 pm
Wanted Delco 5195 Two Cap Distributor

Last post by T4Tom « Fri Sep 19, 2025 3:18 pm
Replies: 5
by Chris Haynes » Sun May 04, 2025 9:28 pm

First post

I am searching for a Delco 5195 Two Cap Distributor. Originally used on four cylinder Stutz and other makes. image.jpg

Last post

Chris, check out what Tim Dickson has to offer. Here is his website:

At one point Tim offered a dual distributor unit but I am not seeing it on his website, maybe they are still available. Tim also sells a dual spark, single distributor that is made with modern, easy to find components.

I bought the Delco dual distributor from John Karvaly but...

5 Replies

1341 Views

Last post by T4Tom
Fri Sep 19, 2025 3:18 pm
Free: Induction Coil "Dow Spark Coil"

Last post by Rodger Erickson « Fri Sep 19, 2025 1:42 pm

by Rodger Erickson » Fri Sep 19, 2025 1:42 pm

I know it's not Model T but it's out of that era. Induction coil Dow Spark Coil Boston probably for a Stationary engine. Untested, needs total restoration. It's yours if you pay for shipping.

indc05.jpg

indc06.jpg

indc07.jpg

Thanks for looking!

0 Replies

479 Views

Last post by Rodger Erickson
Fri Sep 19, 2025 1:42 pm
FS - Accessory Black Bumper

Last post by OldFord « Fri Sep 19, 2025 12:36 pm

by OldFord » Fri Sep 19, 2025 12:36 pm

This is a black painted bumper made by the Albany Bumper Co, Albany, NY for the black Model T. Could use some paint, but the label is still visible. Can bring to Hershey. $200 PM for info...

Frank

0 Replies

494 Views

Last post by OldFord
Fri Sep 19, 2025 12:36 pm
FS - Vintage ACME bumper hitch

Last post by Novice « Fri Sep 19, 2025 12:12 pm
Replies: 7
by Heck914 » Sun Sep 14, 2025 10:29 am

First post

ACME bumper hitch. I do not know much about it, any info would be appreciated. from my Dads stuff, I'll never use it.

$40 ? Thanks

Last post

Any photos of a road runner trap. Had one that liked to perch on my outside TV antenna. Had a interesting five note chirp from high to low. Mating call ?

7 Replies

926 Views

Last post by Novice
Fri Sep 19, 2025 12:12 pm
VEE RADIATOR WANTED

Last post by Pep C Strebeck « Fri Sep 19, 2025 11:34 am
Replies: 5
by frontyboy » Thu Sep 18, 2025 11:08 pm

First post

Looking to purchase a brass VEE RADIATOR!!!!!

frontyboy Text 2ho6-919-1949(Seattle)

Last post

Dan,

Not sure what your text means?

frontyboy

Don Meadows estate auction in White Bluff, Tennessee next Saturday. There is a V radiator in the auction. The auction for the cars is on-site/in-person, everything else (including the V radiator) is on-line only, not an in-person auction. If you intend to bid READ THE TRANSACTION FEE RULES! A...

5 Replies

624 Views

Last post by Pep C Strebeck
Fri Sep 19, 2025 11:34 am
WTB Mounting strap(s) for Prest-O-Lite Tank

Last post by OldFord « Fri Sep 19, 2025 11:18 am
Replies: 1
by Layden Butler » Sat Sep 13, 2025 1:16 pm

First post

Would like to purchase a pair ( or a single would help) of running board mounting straps for a 6 diameter Prest-O-Lite tank to supply my headlamps.
Contact me thru MTFCA messaging system email.

Last post

PM sent to you

1 Replies

365 Views

Last post by OldFord
Fri Sep 19, 2025 11:18 am
FS Frontenac Literature

Last post by old_charley « Fri Sep 19, 2025 11:07 am
Replies: 3
by old_charley » Thu Sep 18, 2025 7:22 pm

First post

I have for sale what I believe to be three pieces of original Frontenac sales literature for sale. The first is a 12 page piece, dated April 1, 1924, showing pretty much everything Frontenac offered from cylinder heads to a complete race car. The second piece is four pages, has no date, but describes the T, S, and R model heads and has a picture...

Last post

Good morning, Richard. Thanks for the email. I sent you a reply with the pdf attached.

Bryan

3 Replies

434 Views

Last post by old_charley
Fri Sep 19, 2025 11:07 am
FS 1917 liscense plates

Last post by Tinner12 « Fri Sep 19, 2025 9:11 am

by Tinner12 » Fri Sep 19, 2025 9:11 am

repainted 1917 Washington plates $150 plus shipping Very good steel plate

0 Replies

427 Views

Last post by Tinner12
Fri Sep 19, 2025 9:11 am
WTB.No longer available from Langs

Last post by frontyboy « Fri Sep 19, 2025 12:32 am
Replies: 7
by WorldChamp1914 » Wed Sep 17, 2025 8:26 am

First post

Any out there? IMG_6950.png

Last post

Sorry about today, was getting my 1910 Stoddard Dayton ready for shipping for a tour next week, and every which way I turned there was a problem, I will take photos 1st thing tomorrow in the morning.

frontyboy

7 Replies

1270 Views

Last post by frontyboy
Fri Sep 19, 2025 12:32 am
For Sale: TT Rear Springs Hershey Delivery

Last post by Ed Fuller « Thu Sep 18, 2025 8:15 pm

by Ed Fuller » Thu Sep 18, 2025 8:15 pm

For Sale: A nice set of rear leaf springs for a TT. No cracks, pitting, or heavy wear. These can be hard to find without any cracks or broken leaves.
SOLD!
$40 for the set. Can be picked up at Hershey

IMG_7712.jpeg

0 Replies

395 Views

Last post by Ed Fuller
Thu Sep 18, 2025 8:15 pm
FS: Neville fat man steering wheel

Last post by mtntee20 « Thu Sep 18, 2025 4:09 pm
Replies: 4
by TPrez1923@aol.com » Wed Sep 17, 2025 2:13 pm

First post

Very nice Neville sliding steering wheel for Model T. Fits steering post perfectly, works perfectly. Asking $425.00 obo plus $20.00 shipping

Last post

Chad, I'm planning on a '25 C-cab TT or a 27 Wood body delivery. Basically, the one I fit better with it.

4 Replies

722 Views

Last post by mtntee20
Thu Sep 18, 2025 4:09 pm
Tire pump for sale

Last post by Franko « Thu Sep 18, 2025 3:03 pm
Replies: 1
by Franko » Thu Sep 18, 2025 2:14 pm

First post

Excellent tire pump $100. Plus shipping. Call Tim 216-387-9544

Last post

Pump is sold within 10 minutes. Thank you Mark from California!!!

1 Replies

296 Views

Last post by Franko
Thu Sep 18, 2025 3:03 pm
Loading up for hershey

Last post by KenHaverhill « Thu Sep 18, 2025 11:54 am

by KenHaverhill » Thu Sep 18, 2025 11:54 am

Parting out a fordson model f .have rebuilt mag and a 1 bbl carburetor both still in boxes .tool box with tools and more .will only bring if interest.also bringing a 26 4 door project car in primer ready for restoration
Have title in hand

0 Replies

535 Views

Last post by KenHaverhill
Thu Sep 18, 2025 11:54 am
Loading up for hershey

Last post by KenHaverhill « Thu Sep 18, 2025 11:54 am

by KenHaverhill » Thu Sep 18, 2025 11:54 am

Parting out a fordson model f .have rebuilt mag and a 1 bbl carburetor both still in boxes .tool box with tools and more .will only bring if interest.also bringing a 26 4 door project car in primer ready for restoration
Have title in hand

0 Replies

408 Views

Last post by KenHaverhill
Thu Sep 18, 2025 11:54 am
FS 1914 Model T and spare engine

Last post by JonnyQuest « Thu Sep 18, 2025 11:32 am
Replies: 3
by JonnyQuest » Wed Sep 17, 2025 9:04 am

First post

Running and in good shape T with spare engine from Owl's Head in Maine. Interested in selling both. Will get better photos and video. It was my father's T that he used extensively in the NH/Maine T club/trips. And I will ask the friend who has it currently to get some good photos and the stuff off it and put the roof on correctly! Asking $21K for...

Last post

Thank you!

3 Replies

865 Views

Last post by JonnyQuest
Thu Sep 18, 2025 11:32 am
FOUND the Fender eye bolts. Thanks all.

Last post by Todd Touchberry « Wed Sep 17, 2025 9:34 pm
Replies: 2
by Jack Putnam, in Ohio » Fri Sep 12, 2025 9:52 pm

First post

in search of 4 fender eye bolts and nuts. Contact thru forum preferred.

Last post

I have 2 if you're still looking.

2 Replies

518 Views

Last post by Todd Touchberry
Wed Sep 17, 2025 9:34 pm
For Sale: Holley NH center drain carburetor

Last post by Ed Fuller « Wed Sep 17, 2025 7:15 pm
Replies: 1
by Ed Fuller » Sun Sep 14, 2025 4:31 pm

First post

Holley NH center drain carburetor core for rebuilding. Spray needle and throttle are free. Choke is stuck. I didn’t try to remove the bowl but it sounds like it has a float.
SOLD!
$40 plus shipping in the U.S.

IMG_7687.jpeg

IMG_7688.jpeg

IMG_7689.jpeg

IMG_7690.jpeg

Last post

Still available

1 Replies

516 Views

Last post by Ed Fuller
Wed Sep 17, 2025 7:15 pm
1911 Torpedo door locks F/S

Last post by Layden Butler « Wed Sep 17, 2025 6:28 pm
Replies: 2
by Layden Butler » Sun Sep 14, 2025 1:22 pm

First post

These are a complete and proper pair of left and right door locks for all 1911 Torpedos, both styles ( early with and later without) outside door handles. Same manufacturer as were supplied to Ford in their bodies. Price is $450 the pair, packaging included, shipping at cost. They are nice fully operational, never any rust. Available to first...

Last post

Austin, I guess I wasn't clear enough, the doors that these locks are in are NOT Model T of any year or style. Same locks as used on 1911 Model T Ford Torpedo but the doors are off some other car. Like today, suppliers to Ford ( in this case bodies) purchased needed components from specialty manufacturers ( locks in this case).

Nice doors but...

2 Replies

531 Views

Last post by Layden Butler
Wed Sep 17, 2025 6:28 pm
WTB tire pump and jack handle for 1925 tool kit

Last post by KimDobbins « Wed Sep 17, 2025 3:55 pm

by KimDobbins » Wed Sep 17, 2025 3:55 pm

Looking for the tire pump and jack handle pictured. kdmks AT att.net.

0 Replies

488 Views

Last post by KimDobbins
Wed Sep 17, 2025 3:55 pm
FS 1914 Ford manual

Last post by fordrelic « Wed Sep 17, 2025 3:41 pm

by fordrelic » Wed Sep 17, 2025 3:41 pm

For Sale: Nice original 1914 Ford Manual.

$125 plus shipping

ford manual 1914.jpg ford manual 1914 2.jpg ford manual 1914 3.jpg ford manual 1914 5.jpg

0 Replies

456 Views

Last post by fordrelic
Wed Sep 17, 2025 3:41 pm
FS 1913-4 12 rivet diff housings UPDATED PRICE

Last post by Karl Von Neumann « Wed Sep 17, 2025 3:12 pm
Replies: 6
by Karl Von Neumann » Tue Jun 24, 2025 11:30 am

First post

Pair of 1913 1914 12 rivet housings THE LEFT HOUSING HAS A CRACK thru one of the pinion spool bolt holes it is fixable. Will probably need to be re riveted the rivets have been peened over on the left side $ 175 for the pair plus shipping but would prefer local pickup located pleasant prairie wisconsin

Last post

Move to top

6 Replies

2230 Views

Last post by Karl Von Neumann
Wed Sep 17, 2025 3:12 pm
FS 1913 Roadster Body

Last post by SleepyT « Wed Sep 17, 2025 1:48 pm
Replies: 12
by SleepyT » Sun Mar 23, 2025 12:28 am

First post

1913 Ray Wells roadster body new wood ready for body and paint work. Includes turtle deck, Rands windshield, floor boards, firewall and gas tank cover. Windshield supports are not original. 5000$ Delivery possible to Bakersfield, CA swap meet in May. Russ 928.863.8375

Last post

Back on the market.

12 Replies

4916 Views

Last post by SleepyT
Wed Sep 17, 2025 1:48 pm
Looking for 26/27 hood shelves .

Last post by EricMac « Wed Sep 17, 2025 6:57 am
Replies: 3
by Oldrusty26 » Sun Sep 14, 2025 12:21 pm

First post

Looking for a set of decent 26/27 hood shelves don’t have to be perfect , actually need a passenger side one if anyone has one loose .
I m in northwest pa .
Thank you .

Last post

PM sent this morning.

3 Replies

548 Views

Last post by EricMac
Wed Sep 17, 2025 6:57 am
FS model T Ford parts

Last post by Shannon_in_Texas « Wed Sep 17, 2025 6:52 am
Replies: 8
by KimDobbins » Tue Sep 16, 2025 10:45 am

First post

Original complete battery box $200. 1915 coil box switch $40. 1915 coil box lid, this is the first style without the re enforcing rib $35. Roadster windshield posts $75. Pair of NOS headlight rims $50. New battery door for pickup $50. All plus shipping kdmks AT att.net.

Last post

Kim, I sent you an email about the battery door.

8 Replies

1035 Views

Last post by Shannon_in_Texas
Wed Sep 17, 2025 6:52 am
FS early low no made in USA cylinder head *SOLD*

Last post by KimDobbins « Tue Sep 16, 2025 8:22 pm
Replies: 2
by KimDobbins » Tue Sep 16, 2025 11:32 am

First post

This is a nice early head, I can’t see any cracks $600 plus shipping. kdmks AT att.net.

Last post

Head is sold.

2 Replies

532 Views

Last post by KimDobbins
Tue Sep 16, 2025 8:22 pm
for sale 26/27 large brake rear end housings and disc brake setup kit

Last post by bobster1 « Tue Sep 16, 2025 8:10 pm
Replies: 2
by bobster1 » Sat Sep 13, 2025 3:14 pm

First post

I've got a 26/27 large brake rear end housing with all new brake parts for sale. The housings have been cleaned sand blasted and epoxy primed. they will come with new brake cams, bushings, linings, riveting tool & shoes. also rear spring bushings and flip top oilers. $400
Also available is a complete Disc brake setup for wire wheels from TexasT...

Last post

Disc brake setup sold, thank you Model T Forum!

Axle housings with new brake parts still available.

2 Replies

533 Views

Last post by bobster1
Tue Sep 16, 2025 8:10 pm
FS Rebuilt Coils - SOLD

Last post by JZSlenker « Tue Sep 16, 2025 5:36 pm
Replies: 1
by JZSlenker » Mon Sep 15, 2025 4:18 pm

First post

Another set of Four coils as pictured. Take one or Take all. These have been cleaned, new capacitors installed, new fiber washers, new tar poured, reassembled adjusted and tested. These obviously aren't Patterson coils but they work and could be a perfect backup to have on the shelf. Reasonable offers considered. PayPal only. Buyer pays actual...

Last post

Sold - another set coming soon

1 Replies

347 Views

Last post by JZSlenker
Tue Sep 16, 2025 5:36 pm
Early Blocks FS. Hershey?

Last post by Dan Hatch « Tue Sep 16, 2025 3:04 pm
Replies: 2
by Dan Hatch » Tue Sep 09, 2025 9:57 am

First post

I have been looking through my blocks and some early ones.
1. Casting date 12/5/12 think number is 202+++. Screw in core plugs, looks like some older crack repair . I will pressure test it and see.
2. 11/??/16 looks ok, don’t see anything wrong, will pressure test.
Any interest. Can bring to Hershey, but not unless someone wants them.

Plan to...

Last post

I need to pressure test them first.

2 Replies

801 Views

Last post by Dan Hatch
Tue Sep 16, 2025 3:04 pm
Speedometer mount FS

Last post by Dan Hatch « Tue Sep 16, 2025 2:23 pm
Replies: 1
by Dan Hatch » Fri Sep 12, 2025 5:40 pm

First post

Here is a speedometer mount came off a straight spindle arm.
Not sure of year used, but spindle is a DB. Look at pictures.
$30 + shipping. Email me by forum.
IMG_4607.jpeg
IMG_4608.jpeg
IMG_4609.jpeg
IMG_4610.jpeg

Last post

Back to the top

1 Replies

518 Views

Last post by Dan Hatch
Tue Sep 16, 2025 2:23 pm
Dome light FS

Last post by Dan Hatch « Tue Sep 16, 2025 2:21 pm
Replies: 2
by Dan Hatch » Sat Sep 13, 2025 2:30 pm

First post

Here is some light no lens. See pictures. $15 + shipping. Email me by forum. Dan
IMG_4614.jpeg
IMG_4615.jpeg
IMG_4616.jpeg

Last post

Back to the top

2 Replies

422 Views

Last post by Dan Hatch
Tue Sep 16, 2025 2:21 pm
Early Magneto cores Hershey

Last post by Dan Hatch « Tue Sep 16, 2025 2:20 pm
Replies: 3
by Dan Hatch » Fri Sep 12, 2025 3:00 pm

First post

I have at least 3 double stack, oval, cast iron mag field coil cores. I can bring to Hershey if anyone is interested.
Email me by forum. Not bringing unless spoken for. Dan

Last post

No one needs these? How about you coil rebuilders?

3 Replies

545 Views

Last post by Dan Hatch
Tue Sep 16, 2025 2:20 pm
SOLD New Texas T Distributor

Last post by Tadpole « Tue Sep 16, 2025 10:45 am
Replies: 3
by Tadpole » Sun Sep 14, 2025 8:22 am

First post

New, never installed Texas T Distributor Kit for sale. Project I bought this for went a different direction and now I don’t see myself using it. $300 shipped anywhere in the continental U.S.A.

Last post

Perry, this distributor would run either. All you would need is a 12V coil.

3 Replies

531 Views

Last post by Tadpole
Tue Sep 16, 2025 10:45 am
16-18 Wide Track Rear axle housings

Last post by Dan Hatch « Tue Sep 16, 2025 8:18 am
Replies: 5
by Dan Hatch » Thu Aug 28, 2025 8:57 am

First post

Here is a pair of rear axle housings for a 16/18 WT.
They have been vatted, inside and out. Baking plates look good, spring perches look good, brake cams look good.
There is a crack in one bolt hole for pinion stud. See pictures.
$190 for the pair. Vatting is almost that. NO SHIPPING, pickup here or maybe Hershey in Chocolate Field. Email me by...

Last post

Back to the top

5 Replies

1066 Views

Last post by Dan Hatch
Tue Sep 16, 2025 8:18 am
Accessory Steering gear/column Gemmer style

Last post by WorldChamp1914 « Tue Sep 16, 2025 12:11 am
Replies: 1
by Eric Edwards » Mon Sep 15, 2025 7:03 am

First post

Accessory T Ford Steeribg column with lower gears enclosed ( Gemmer style) $500 Eric Edwards 705 828 5405

Last post

What does it look like?

1 Replies

416 Views

Last post by WorldChamp1914
Tue Sep 16, 2025 12:11 am
FS Ruckstell housing and parts

Last post by KimDobbins « Mon Sep 15, 2025 8:35 pm
Replies: 7
by KimDobbins » Wed Aug 13, 2025 11:13 pm

First post

Ruckstell housing plus other half. The tube is bent, can be straightened with a press or an extra tube is included. $135.00. P202 diff assembly, $125. P146 sliding gear, $60. P211 bearing $35. P147 notch plate, $50. P144 sun gear, $40. P93 internal ring gear, new, $200, used $100. P87 pinion gears (2) $25 each. All plus shipping. kdmks AT att.net....

Last post

These are the ruckstell parts I still have for sale.

7 Replies

1438 Views

Last post by KimDobbins
Mon Sep 15, 2025 8:35 pm
WTB - pair of front spring perches for '27T

Last post by TRDxB2 « Mon Sep 15, 2025 8:35 pm
Replies: 3
by milkman » Mon Sep 15, 2025 12:56 pm

First post

I'm looking for a pair pf front spring perches for a '27T. Thanks.

Last post

Will send pictures later tonight

3 Replies

368 Views

Last post by TRDxB2
Mon Sep 15, 2025 8:35 pm
WTB large gas tank for speedster

Last post by skyhunter « Mon Sep 15, 2025 5:09 pm

by skyhunter » Mon Sep 15, 2025 5:09 pm

Anyone going to Hershey have a steel gas tank for a speedster?

tank copy.png

0 Replies

423 Views

Last post by skyhunter
Mon Sep 15, 2025 5:09 pm
Champion A25 3 piece spark plug

Last post by JZSlenker « Mon Sep 15, 2025 4:04 pm
Replies: 2
by Randylbarnes » Wed Sep 10, 2025 1:54 am

First post

ISO a good Champion A25 take apart spark plug. The car I picked up has really clean plugs but unfortunately one has the top of the plug broke off.

Last post

Items are SOLD

2 Replies

551 Views

Last post by JZSlenker
Mon Sep 15, 2025 4:04 pm
Taillights FS

Last post by babychadwick « Mon Sep 15, 2025 10:07 am
Replies: 4
by Dan Hatch » Sat Sep 13, 2025 2:27 pm

First post

Here are 3 tail lights all for one money. $20 + shipping. See pictures. All have red glass lenses. Email me by forum. Dan
IMG_4613.jpeg
IMG_4612.jpeg

Last post

After you get them and take a look let me know. When my dad built my speedster he used a plastic light and I've been meaning to change it for a glass one.

4 Replies

724 Views

Last post by babychadwick
Mon Sep 15, 2025 10:07 am
Ossipee Snow mobile kit For Sale

Last post by Mark Gregush « Mon Sep 15, 2025 9:14 am
Replies: 1
by tom_strickling » Mon Sep 15, 2025 8:29 am

First post

I dont represent this I am just sharing a FB marketplace post.

Last post

When I click on that link it shows no longer available but this one shows it still available. Proceed with caution.

The guy selling it has been on Facebook for a while so that is a plus.

1 Replies

370 Views

Last post by Mark Gregush
Mon Sep 15, 2025 9:14 am
FS. 1910-11 Torpedo frame and…

Last post by Eric Edwards « Mon Sep 15, 2025 6:55 am

by Eric Edwards » Mon Sep 15, 2025 6:55 am

Original frame. No running board irons attached . $ 1000 pickup only
Original Torpedo wood firewall (for pattern) $100
Original Torpedo lower body metal.(for patterns.). $250
Eric Edwards. 705 828 5405

0 Replies

509 Views

Last post by Eric Edwards
Mon Sep 15, 2025 6:55 am
FS. Rebuilt small drum Ruxtell Axle/Fronty OHV

Last post by Eric Edwards « Mon Sep 15, 2025 6:35 am

by Eric Edwards » Mon Sep 15, 2025 6:35 am

Freshly Rebuilt Small drum Ruxtell assembly with new inner bearings 3:1 gears and shifter
$3750
Rebuilt Fronty OHV valve Head. Fitted with reground 428 valves and new springs $3950 New Rocker train available
Single Buffalo 30x3 1/2 wire wheels by Al McRoberts inquire
Reproduction Morton&Brett fibreglass body $4500 pickup only.
Eric Edwards 705...

0 Replies

547 Views

Last post by Eric Edwards
Mon Sep 15, 2025 6:35 am
WTB. 191y Michigan license plate

Last post by ZacharyNelson « Mon Sep 15, 2025 6:09 am
Replies: 4
by w_cbeyer@hotmail.com » Mon Sep 08, 2025 5:30 pm

First post

If anyone has a 1916 Michigan plate in decent shape I’m interested

Last post

Those RPM numbers sound pretty normal for a T, but it’s always worth double-checking with a handheld tach and making sure your ignition and mixture are dialed in. Sometimes what sounds fast is still within a safe range. I was reading this while looking up versant test meaning for work—funny how both engines and language tests rely on finding the...

4 Replies

638 Views

Last post by ZacharyNelson
Mon Sep 15, 2025 6:09 am
SOLD tool box

Last post by Melba Nolan « Sun Sep 14, 2025 10:50 pm
Replies: 1
by Melba Nolan » Sat Aug 02, 2025 1:56 pm

First post

For sale: running board tool box. has some holes in bottom and has a bottom liner. $50 plus postage
20241027_164611.jpg 20241027_164638.jpg 20241027_164703.jpg

Last post

reduced price: now $45 plus shipping

1 Replies

994 Views

Last post by Melba Nolan
Sun Sep 14, 2025 10:50 pm
WTB: Large Drum Ruckstell & Rocky Mountain Brakes – Will Be at Hershey

Last post by 1926DepotHack « Sun Sep 14, 2025 10:27 pm

by 1926DepotHack » Sun Sep 14, 2025 10:27 pm

Looking to buy a large drum Ruckstell rear end and Rocky Mountain Brakes for my 1926 Depot Hack.

Will be at Hershey and would love to arrange a pickup or purchase while I’m there.

We finished the initial restoration back in 2019 for my wedding (photo below) and now we're ready to upgrade so the car can better handle the hills of Western PA....

0 Replies

431 Views

Last post by 1926DepotHack
Sun Sep 14, 2025 10:27 pm
Delco Two Cap distributor needed

Last post by kmatt2 « Sun Sep 14, 2025 6:57 pm
Replies: 3
by Chris Haynes » Sun Sep 14, 2025 3:38 pm

First post

Earlier this year I bought a 1932 Model B 5 Window that had been in backyard storage for 75 years. It was an early Hot Rod with a Morton and Brett OHV Dual Plug conversion head. It also had a front mounted Delco Two Cap distributor. These were originally used on cars from the late teens and early '20's. The American Stutz four cylinders used them....

Last post

I will try to post a picture of what they look like . Note the caps pictured that look like they are for 8 cy are actually a twin fire cap form a more modern Nissan I think .

3 Replies

416 Views

Last post by kmatt2
Sun Sep 14, 2025 6:57 pm
WTD1912 ford model t touring body

Last post by andrew o sullivan « Sun Sep 14, 2025 1:33 pm
Replies: 1
by andrew o sullivan » Sat Sep 13, 2025 9:16 am

First post

WTD 1912 ford model t touring body .Anybody willing to part with one . Anybody bring one to hershey

Last post

im heading to hershey this year if anybody was bring 1912 touring body

1 Replies

479 Views

Last post by andrew o sullivan
Sun Sep 14, 2025 1:33 pm
1913-1915 repo flat front fenders.

Last post by frontyboy « Sat Sep 13, 2025 11:58 pm
Replies: 8
by frontyboy » Fri Aug 22, 2025 6:04 pm

First post

I have 2 sets of late '13-15 nearly perfect front fenders, these are repo fenders and were on a 1914 speedster. They have been sand blasted and now in primer. I can take detailed photos of any areas you want to see. All 4 were on a speedster when it was restored. No rust no dents no wavey side trim. I will sell either 2 as a pair or all 4 . New...

Last post

Don't want to store these fenders so up to the top

frontyboy

8 Replies

2031 Views

Last post by frontyboy
Sat Sep 13, 2025 11:58 pm
ROOF PARTS WANTED

Last post by frontyboy « Sat Sep 13, 2025 10:59 pm

by frontyboy » Sat Sep 13, 2025 10:59 pm

WANTED: for ROOF 8valve cylinder head,
3Port exhaust manifold
Cylinder head gasket or tracing
8 push rods or photo, and drawings.

thnx,
frontyboy.

brasscarguy@comcast.net or text 2ho6-919-1949(anytime)

0 Replies

499 Views

Last post by frontyboy
Sat Sep 13, 2025 10:59 pm
Disteel wheel wanted

Last post by DNolting « Sat Sep 13, 2025 10:51 pm
Replies: 3
by DNolting » Wed Sep 10, 2025 10:06 pm

First post

I would like to find one more Disteel wheel, 30 x 3 ½”, for my grandson’s speedster project. Must have a good rim. Will buy out right or I have extra front & rear Disteel hubs to trade.
Thank you
Dave & Eric

Last post

We just need one wheel to complete a set.

3 Replies

538 Views

Last post by DNolting
Sat Sep 13, 2025 10:51 pm
FS: 21" wood wheels with rims and tires -- Hershey Delivery

Last post by Walter Higgins « Sat Sep 13, 2025 8:34 pm

by Walter Higgins » Sat Sep 13, 2025 8:34 pm

Hershey delivery available.

These were takeoffs from a 1920 roadster project when they were replaced with a set of wheels correct for the year. Removed from a roadworthy car in the 1980's and in garaged storage most of the car's life (one-family ownership for over 90 years and put on about the 1940's). They'd look great on an unrestored driver....

0 Replies

428 Views

Last post by Walter Higgins
Sat Sep 13, 2025 8:34 pm
FS Coils - SOLD

Last post by JZSlenker « Sat Sep 13, 2025 4:40 pm
Replies: 1
by JZSlenker » Thu Sep 11, 2025 1:10 pm

First post

Four coils as pictured. Take one or Take all. These have been cleaned, new capacitors installed, new fiber washers, new tar poured, reassembled adjusted and tested. These obviously aren't Patterson coils but they work and could be a perfect backup to have on the shelf. Reasonable offers considered. PayPal only. Buyer pays actual shipping.

Last post

More sets coming soon.

1 Replies

531 Views

Last post by JZSlenker
Sat Sep 13, 2025 4:40 pm
FS Model T on Craigslist

Last post by brassford « Fri Sep 12, 2025 9:27 pm

by brassford » Fri Sep 12, 2025 9:27 pm

I have no connection or further information
Enjoy Your Day!

0 Replies

758 Views

Last post by brassford
Fri Sep 12, 2025 9:27 pm
1915 Coil Box

Last post by Bruce Z « Fri Sep 12, 2025 12:34 pm
Replies: 2
by Bruce Z » Sat Sep 06, 2025 11:28 am

First post

Coil box for a 1915 Model T. Good solid metal. $100 plus shipping

Last post

Bump...............

2 Replies

580 Views

Last post by Bruce Z
Fri Sep 12, 2025 12:34 pm
FS brake rod support brackets

Last post by Karl Von Neumann « Fri Sep 12, 2025 12:33 pm
Replies: 1
by Karl Von Neumann » Mon Aug 25, 2025 10:56 am

First post

Brake rod brackets one pair and 2 of the same side 10$ each plus the ride

Last post

Move to top

1 Replies

753 Views

Last post by Karl Von Neumann
Fri Sep 12, 2025 12:33 pm
1915 all original Model T “Canadian” radiator

Last post by amandasfowler « Fri Sep 12, 2025 11:58 am
Replies: 1
by amandasfowler » Wed May 28, 2025 11:31 am

First post

1915 all original Model T “Canadian” radiator. Needs restored.

Located in Napoleon, OH
$750 (open to offers)

Call Amanda at 917.699.7670

Last post

Bump…………….

1 Replies

1357 Views

Last post by amandasfowler
Fri Sep 12, 2025 11:58 am
Winfield carb adaptor FS

Last post by Roadsterguy « Thu Sep 11, 2025 7:50 pm
Replies: 2
by Layden Butler » Sat Mar 08, 2025 5:05 pm

First post

Adaptor to put Winfield Model S or SR carburetor size BB on to a 1 1/4 S.A.E. manifold ( 2 bolts 2 11/16 c/c). New Old Stock never used Winfield piece part number S-64BB1. It has a tap for vacuum line ( does not have to be used) to windshield wiper or distributer advance. $85, 48 state shipping $10.

Last post

Sent you a email.

2 Replies

1027 Views

Last post by Roadsterguy
Thu Sep 11, 2025 7:50 pm
Clock brass Phinney-Walker F/S

Last post by Layden Butler « Thu Sep 11, 2025 5:08 pm
Replies: 1
by Layden Butler » Mon Aug 18, 2025 4:02 pm

First post

Solid brass case and rim, 2 1/2 face, Phinney-Walker keyless dash clock, no dents cracks or repairs, sets properly but only runs for a few seconds when rotated, they always should have a trip to the clock shop for cleaning and lubrication, nickel plated which could be stripped to bare brass if desired. $85 which includes domestic 48 state...

Last post

Great companion to Stewart Model 26 speedometers!!

1 Replies

896 Views

Last post by Layden Butler
Thu Sep 11, 2025 5:08 pm
FS 1913 WINDSHIELD HINGES AND ROD

Last post by got10carz « Thu Sep 11, 2025 12:50 pm

by got10carz » Thu Sep 11, 2025 12:50 pm

For Sale 2 hinges and 1 support rod. No brass caps.$100 Steve 701 212 5009

0 Replies

481 Views

Last post by got10carz
Thu Sep 11, 2025 12:50 pm
SOLD Ford Script Jack

Last post by MAG « Thu Sep 11, 2025 12:45 pm
Replies: 3
by MAG » Mon Jul 28, 2025 6:37 pm

First post

T2343 Screw Ford Script in good working condition. $35 plus $15 shipping. Email me at markpaulagember AT aol DOT com

Last post

sold to Jack

3 Replies

938 Views

Last post by MAG
Thu Sep 11, 2025 12:45 pm
FS Headlamp Double Sockets 1915/16

Last post by MAG « Thu Sep 11, 2025 12:39 pm
Replies: 3
by MAG » Mon Jul 28, 2025 6:35 pm

First post

I have 4 headlamp sockets for 1915 or 1916 Model T’s. These differ from the later ones in that the pins are 90 degrees off. This was done to align the filament horizontally to allow the headlamp to be focused. Note the later socket in the middle of the picture. The focus screw for the 1915/16 is at the top of the light bulb, not to the side of the...

Last post

To the top

3 Replies

573 Views

Last post by MAG
Thu Sep 11, 2025 12:39 pm
FS Air Pressure Gauges

Last post by MAG « Thu Sep 11, 2025 12:38 pm
Replies: 1
by MAG » Mon Jul 28, 2025 6:28 pm

First post

2 Brass and 1 Nickle w/case Shrader air pressure gauges. Also 3 Ford Motor Company modern air pressure gauges. $40 shipped to your door. Email me at markpaulagember AT aol DOT com

Last post

Lower price in add

1 Replies

933 Views

Last post by MAG
Thu Sep 11, 2025 12:38 pm
FS 6 Fluted Oil Cap – Steel no Script

Last post by MAG « Thu Sep 11, 2025 12:36 pm
Replies: 1
by MAG » Mon Jul 28, 2025 6:40 pm

First post

6 fluted original steel oil cap. Plain top. (1915-16) $25 shipped to your door. Has intact screen. Email me at markpaulagember AT aol DOT com

Last post

To the top

1 Replies

934 Views

Last post by MAG
Thu Sep 11, 2025 12:36 pm
FS Front wheel race set for Model A NEW

Last post by MAG « Thu Sep 11, 2025 12:35 pm
Replies: 1
by MAG » Mon Jul 28, 2025 6:32 pm

First post

This is all the wheel bearing races you need for the front wheels on a Model A. These are brand new Timken races. $50 shipped to your door. Email me at markpaulagember AT aol DOT com

Last post

To the top

1 Replies

810 Views

Last post by MAG
Thu Sep 11, 2025 12:35 pm
Pending 26/ 27 Rocky Mountain brakes

Last post by 2727 « Thu Sep 11, 2025 10:39 am
Replies: 1
by Bjerm » Thu Sep 11, 2025 8:44 am

First post

I have changed plans with my car and I am not going to use Rocky’s. Has a narrow Rocky Mountain pedal. $800 plus shipping. Emailing me through the forum is the best way to reach me. Ben

Last post

e-mail sent
Peter Haid

1 Replies

300 Views

Last post by 2727
Thu Sep 11, 2025 10:39 am
SOLD packnut wrench

Last post by Melba Nolan « Wed Sep 10, 2025 11:10 pm
Replies: 4
by Melba Nolan » Tue Sep 09, 2025 12:13 am

First post

For sale: Exhaust packnut wrench 3Z624 $35 plus postage

20250908_184449.jpg

Last post

sorry, I looked again and checked my spam and don't find anything from you.

4 Replies

707 Views

Last post by Melba Nolan
Wed Sep 10, 2025 11:10 pm
FS 28 top irons

Last post by fordrelic « Wed Sep 10, 2025 9:31 pm

by fordrelic » Wed Sep 10, 2025 9:31 pm

For Sale: 1928/29 model A roadster top irons, new never used.

These will ship folded.

$1000

28 29 top irons.jpg 28 29 top irons 2.jpg

0 Replies

356 Views

Last post by fordrelic
Wed Sep 10, 2025 9:31 pm
Buffalo Wire Wheels NEW!

Last post by Kevin Pharis « Wed Sep 10, 2025 8:14 pm

by Kevin Pharis » Wed Sep 10, 2025 8:14 pm

I typically only make wheels to order… but this order got cancelled. Wheels are ready to go! 100% new components, just need paint and rubber. Bare steel, powder coating available. New hubs and caps available too

5 available 30”x3-1/2” rim —> $1200 ea + shipping

IMG_3301.jpeg IMG_3302.jpeg
IMG_1432.jpeg

0 Replies

640 Views

Last post by Kevin Pharis
Wed Sep 10, 2025 8:14 pm
U & J rebuild kits - going once...going twice...last gaskets sold...

Last post by Scott_Conger « Wed Sep 10, 2025 6:41 pm
Replies: 8
by Scott_Conger » Sat Apr 05, 2025 4:33 pm

First post

As was promised last year, the last set of dies have now been made and correct gaskets stamped...

Brand new, custom float valve, and perfectly dimensioned custom gaskets plus the venturi spacer are now available to be purchased as a kit.

Full kits will be sold until I am out of float valves, and then just the gasket set alone, will be available,...

Last post

Gaskets only
no float valves

when this kit of gaskets is gone then that's it - to heck with it

having to do a hard-sell on things that apparently no one wants is plenty demeaning but better than throwing things out (though it's damn tempting)

FWIW - in my opinion, the 3 pages of instructions and hints I supply with the gaskets is darn near...

8 Replies

3303 Views

Last post by Scott_Conger
Wed Sep 10, 2025 6:41 pm
FS 1909-10 E & J Brass Headlamps (SOLD)

Last post by bryan831daniel « Wed Sep 10, 2025 2:25 pm
Replies: 2
by ThreePedalTapDancer » Wed Sep 10, 2025 2:00 pm

First post

Here is a nice pair of E & J 466 brass headlamps for the 1909-1910 Model T Ford. They appear to be very old reproductions, at least from the late 1960s. They are in excellent shape, no cracks or serious dents. Glass intact. Some small wear indentation from forks rubbing during use on back lower dome, but not seen when mounted. They include...

Last post

E-mail sent. ~Bryan

2 Replies

432 Views

Last post by bryan831daniel
Wed Sep 10, 2025 2:25 pm
ISO: EE Model T crank preferably already ground, ready to go

Last post by speedytinc « Wed Sep 10, 2025 1:42 pm
Replies: 4
by nathanw90 » Tue Sep 09, 2025 10:40 pm

First post

Might be in the market to replace my crank. Putting a feeler out for something stronger than what I've got. Rear flange out 2 thou. Could just need a facing, could be worse. Would like to upgrade for longevity anyways.

Trying to stay in budget (I know, those new fancy ones at Chaffins..)

Let me know what you have!

Thanks!

Last post

I disagree. Already 20 under. +wear?? Offered crank is only .002 larger. Very doable with timesaver.
Bonus: the new bearing surfaces will be 100%.
I have done the same, fitting a 1.250 scat crank to a standard Babbitt block.

I would not pass up this excellent crank.

4 Replies

590 Views

Last post by speedytinc
Wed Sep 10, 2025 1:42 pm
FS Splitdorf Magneto Drive gear

Last post by ThreePedalTapDancer « Wed Sep 10, 2025 1:01 pm
Replies: 1
by ThreePedalTapDancer » Sun Feb 16, 2025 4:27 pm

First post

Here is an original Splitdorf main gear for the Splitdorf Dixie front plate magneto drive. It is steel, some wear, all the teeth are present. Impossible to find and often missing from original units that you do find. This is the gear only.

100 includes shipping.

IMG_2822.jpeg

Last post

Still available, very hard to find when you need one.

1 Replies

1013 Views

Last post by ThreePedalTapDancer
Wed Sep 10, 2025 1:01 pm
FS 11-14 Left Headlight Fork (SOLD)

Last post by ThreePedalTapDancer « Wed Sep 10, 2025 12:25 pm
Replies: 1
by ThreePedalTapDancer » Wed Aug 27, 2025 12:53 pm

First post

Original 11-14 left headlight fork. Nice condition, good threads, some pitting, evidence of old but well-done braze repair on one fork. 7 inch between forks. 45.00 includes shipping.

IMG_4340.jpeg

Last post

Nice headlight fork.

1 Replies

801 Views

Last post by ThreePedalTapDancer
Wed Sep 10, 2025 12:25 pm
Gas tank fittings

Last post by AZTerry « Tue Sep 09, 2025 11:27 pm
Replies: 1
by Michael Paul » Tue Sep 09, 2025 9:16 pm

First post

Hi all, looking for inlet and outet fittings to build some early gas tanks.. if you have any rusted out tanks, I'd like to buy the fittings. Any help appreciated.
Thanks Mike

Last post

sent email

1 Replies

346 Views

Last post by AZTerry
Tue Sep 09, 2025 11:27 pm
(Purchased) WTB: early steering gear pinion (the one with long teeth)

Last post by RajoRacer « Tue Sep 09, 2025 8:02 pm
Replies: 2
by LittleTimmy52 » Mon Sep 08, 2025 1:39 pm

First post

No one makes a reproduction of the early style steering gears, my pinion is the messed up one, if anyone has one that's not messed up please let me know if like to buy it.

It's the pinion with 2 key slots and the long teeth and I believe it was for the 4:1 but I could be wrong, I'll look at the old one and see how many teeth it has when I get a...

Last post

I've sent you a couple emails, Lucas

2 Replies

384 Views

Last post by RajoRacer
Tue Sep 09, 2025 8:02 pm
WTB NH Carb. Bowls

Last post by Plankhill « Tue Sep 09, 2025 7:48 pm
Replies: 1
by Plankhill » Sat Aug 30, 2025 8:13 am

First post

I need a couple Holley NH side drain carb. bowls as shown.

Last post

I Still could use one or two of these.

1 Replies

748 Views

Last post by Plankhill
Tue Sep 09, 2025 7:48 pm

New Topic

10399 topics

Page 13 of 104
- Jump to page:
Previous
1
…
11
12
13
14
15
…
104
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum