Classifieds - Parts - Page 18

Classifieds - Parts

New Topic

9742 topics

Page 18 of 98
- Jump to page:
Previous
1
…
16
17
18
19
20
…
98
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

81626 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS 1913-16 Rolling Chassis SOLD

Last post by got10carz « Tue Apr 15, 2025 8:12 pm

by got10carz » Tue Apr 15, 2025 8:12 pm

For Sale bottom frame in pictures. Has DB axle, 13-14 rear axle. Both tapered springs. Fender brackets, firewall brackets & HL forks. $700 Moorhead MN Steve 701 212 5009 Sold

0 Replies

2266 Views

Last post by got10carz
Tue Apr 15, 2025 8:12 pm
FS 1913-16 Frames

Last post by got10carz « Tue Apr 15, 2025 8:02 pm

by got10carz » Tue Apr 15, 2025 8:02 pm

For Sale 2 bare frames correct for late 13-16. Both have RB brackets which tells me they were never trailers. $100 each. Moorhead MN Steve 701 212 5009

0 Replies

2163 Views

Last post by got10carz
Tue Apr 15, 2025 8:02 pm
FS POOR 1914 Body

Last post by got10carz « Tue Apr 15, 2025 7:55 pm

by got10carz » Tue Apr 15, 2025 7:55 pm

For Sale, all this tin for 1914. $100. Moorhead MN Steve 701 212 5009

0 Replies

2271 Views

Last post by got10carz
Tue Apr 15, 2025 7:55 pm
FS 1910-13 Frames

Last post by got10carz « Tue Apr 15, 2025 7:49 pm

by got10carz » Tue Apr 15, 2025 7:49 pm

For Sale 2 early frames. 1 has broken front crossmember $450. 1 has RS rail gone, but has LS fender iron and 11-12 RB brackets $350 Moorhead MN Steve 701 212 5009

0 Replies

2103 Views

Last post by got10carz
Tue Apr 15, 2025 7:49 pm
FS Budd Wheels and Hubs

Last post by got10carz « Tue Apr 15, 2025 7:40 pm

by got10carz » Tue Apr 15, 2025 7:40 pm

For Sale, wheel parts and 2 rear hubs probably from a small Overland. NO CAPS. $400 Moorhead MN Steve 701 212 5009

0 Replies

2089 Views

Last post by got10carz
Tue Apr 15, 2025 7:40 pm
FS: Warford emblems

Last post by TPrez1923@aol.com « Tue Apr 15, 2025 7:30 pm
Replies: 2
by TPrez1923@aol.com » Tue Apr 15, 2025 3:15 pm

First post

For sale: 2 Warfird equipped flat emblems. Asking $75.00 OBO Plus $10.00 shipping. Contact Mark with questions.

Last post

Sold pending payment

2 Replies

1008 Views

Last post by TPrez1923@aol.com
Tue Apr 15, 2025 7:30 pm
wtb 1910 hood straps

Last post by JTT3 « Tue Apr 15, 2025 4:34 pm
Replies: 1
by andrew o sullivan » Tue Apr 15, 2025 4:21 pm

First post

looking for a set of1910 leather straps with buckles that go from the top front of the hood to the bottom of the front frame to each side of the rad. also looking for a set of small leather buckle straps that ties up the front roll up curtain . im looking for a good set of used leather set . year of the car 1910

Last post

You may consider contacting Russ if you want new.

1 Replies

854 Views

Last post by JTT3
Tue Apr 15, 2025 4:34 pm
FS: Rajo Emblems

Last post by TPrez1923@aol.com « Tue Apr 15, 2025 4:01 pm
Replies: 1
by TPrez1923@aol.com » Tue Apr 15, 2025 3:13 pm

First post

For sale: 4 Rajo emblems, reproductions. 2 flat, 1 license plate topper, and 1 small emblem that says on back Rajo motor company (stud mounting for dashboard.
Asking $100.00 OBO plus $10.00 shipping. Contact Mark with questions.

Last post

Sold pending payment.

1 Replies

836 Views

Last post by TPrez1923@aol.com
Tue Apr 15, 2025 4:01 pm
FS Ford Champion spark Plug

Last post by J1MGOLDEN « Tue Apr 15, 2025 10:38 am

by J1MGOLDEN » Tue Apr 15, 2025 10:38 am

For Sale - What is a New Old Stock Champion Spark Plug worth? Email me.

0 Replies

2220 Views

Last post by J1MGOLDEN
Tue Apr 15, 2025 10:38 am
F/S: Drive Line Spool for early T ** SOLD pending final payment**

Last post by jethro « Tue Apr 15, 2025 8:13 am
Replies: 2
by jethro » Sat Apr 12, 2025 10:16 am

First post

For Sale is the rear drive line spool for the early Model T. This is the closed spool where the studs/bolts into the rear end are enclosed. $50.00 plus shipping.

R/S,
Jonathan Bodine
jethro10101@aol.com
1 406 498 3946

Last post

Sold pending final payment.
Thank you to the buyer and MTFCA!

2 Replies

1375 Views

Last post by jethro
Tue Apr 15, 2025 8:13 am
FS: Policeman Stop Signal

Last post by MNToys « Tue Apr 15, 2025 8:09 am
Replies: 5
by TPrez1923@aol.com » Mon Apr 14, 2025 11:09 am

First post

For sale: Older cop electric stop signal. Arms come up when energized thru the stop light switch. Does work, appears to have never been mounted. I've had it over 50 years, not sure if original or early reproduction. Asking $150.00 OBO. Contact Mark with questions.

Last post

I emailed you. Thanks

5 Replies

1510 Views

Last post by MNToys
Tue Apr 15, 2025 8:09 am
For Sale: TT Rear Axle Hyatt Bearings

Last post by BUSHMIKE « Mon Apr 14, 2025 8:54 pm
Replies: 1
by Ed Fuller » Mon Apr 14, 2025 6:17 pm

First post

SOLD

Nice pair of usable TT rear axle Hyatt bearings. Cages are tight, rollers show very little wear and no pitting.

SOLD $40 for the pair plus shipping in the U.S.

IMG_6528.jpeg

IMG_6527.jpeg

IMG_6529.jpeg

Last post

Ill take them. Sending PM.

1 Replies

952 Views

Last post by BUSHMIKE
Mon Apr 14, 2025 8:54 pm
FOR SALE 1924 coupe assembled wood kit with body metal

Last post by geezert « Mon Apr 14, 2025 3:58 pm
Replies: 2
by geezert » Mon Apr 07, 2025 9:56 am

First post

sold pending payment
Bump to top
1924 coupe wood kit with cab metal
Call email or text (preferred)
No fenders , running boards, etc just cab metal
Metal is in good shape a few pinholes but nice otherwise
Eight two eight 964 seven three 99
$5495 or best offer
Located near Boone NC

Last post

Bump to top

2 Replies

1472 Views

Last post by geezert
Mon Apr 14, 2025 3:58 pm
WTB ROADSTER PU BED

Last post by Karl Von Neumann « Mon Apr 14, 2025 2:03 pm
Replies: 3
by Mark Chaffin » Mon Apr 14, 2025 11:31 am

First post

I'm in the market for a shortened model T roadster pickup bed for my Ranch doodlebug project. I would prefer not to modify a good original bed. Instead, I would like to find one someone already modified for a failed street rod project. I can pick up at the Bakersfield Swap Meet May 2nd and 3rd. Thank you for any help locating one. Mark Chaffin...

Last post

I think I have a pair of sides that are decent

3 Replies

1167 Views

Last post by Karl Von Neumann
Mon Apr 14, 2025 2:03 pm
Later Frame For Sale

Last post by J1MGOLDEN « Mon Apr 14, 2025 12:00 pm

by J1MGOLDEN » Mon Apr 14, 2025 12:00 pm

A friend in Maryland has two frames for sale and the price is reasonable. Email me if you are interested.

0 Replies

2209 Views

Last post by J1MGOLDEN
Mon Apr 14, 2025 12:00 pm
FS- Stewart nickel speedometer - SOLD

Last post by t-time « Mon Apr 14, 2025 11:13 am

by t-time » Mon Apr 14, 2025 11:13 am

Nice 75 MPH Stewart nickel plated speedo with firewall mounting bracket. Everything moves and trip meter resets BUT the needle shaft is loose and flops around so it will need to be repaired. $160 includes US shipping.

0 Replies

2191 Views

Last post by t-time
Mon Apr 14, 2025 11:13 am
WTB 1911 Running Boards

Last post by jmemjr « Mon Apr 14, 2025 9:48 am

by jmemjr » Mon Apr 14, 2025 9:48 am

I am in need of a set of 1911 Running Boards for a project. Rootlieb is out of stock and not sure if they are making anymore. Thanks John 201-Three one five - 7373. call or text. E-mail john (at) royalmaster.com

0 Replies

2038 Views

Last post by jmemjr
Mon Apr 14, 2025 9:48 am
More Misc. Free Junky Parts

Last post by Martinbuilt « Mon Apr 14, 2025 8:31 am
Replies: 3
by Rodger Erickson » Sat Apr 12, 2025 11:17 am

First post

More free stuff I just can't bring myself to toss in the scrap barrel. Clockwise from Upper Left
Driveshaft Ball with the radius rod ears chopped off, ball looks OK
Steel Horn Snoot, approx 6 3/4 in length, and the bolt holes are on a 4 15/16 circle
Most of an Indiana steel tail light, good fount
A rusty Ford-O style tail light with a...

Last post

I'd like the indiana tailight, if it's still available.
C

3 Replies

1688 Views

Last post by Martinbuilt
Mon Apr 14, 2025 8:31 am
Side drive magneto adapter

Last post by Ron_White « Sun Apr 13, 2025 10:19 pm
Replies: 9
by Playswithbrass » Mon Jan 27, 2025 1:48 pm

First post

Price 500.00 u.s.plus postage

Removed from a running engine,reason for removal,went to a cross drive due to installing different intake/carb and header set up.
Comes with all hardware/spacers etc. that held adapter to engine IMG_0877.jpeg

Last post

Hi Peter

Are the gears intact and in good shape?

TIA

9 Replies

7535 Views

Last post by Ron_White
Sun Apr 13, 2025 10:19 pm
Refurbished Brass E & J "1908" Tail Lamp SOLD!

Last post by Ron_White « Sun Apr 13, 2025 10:15 pm
Replies: 2
by Rodger Erickson » Sat Apr 12, 2025 12:33 pm

First post

For Sale: One Brass 1908 tail light, refurbished, ca. 1910 -1912. This light was basically pieced together from leftover parts; the door, side panels, glass, and fount are all reproductions(the clear lens is an older reproduction and not quite perfect.) The reflector was re-plated and looks quite nice. A few minor dings are present. This is a good...

Last post

Rodger, also, sent you an email.

2 Replies

1360 Views

Last post by Ron_White
Sun Apr 13, 2025 10:15 pm
Bosch Side Mount Mag plate **Sold**

Last post by jethro « Sun Apr 13, 2025 7:09 pm
Replies: 4
by jethro » Mon Apr 07, 2025 7:45 am

First post

This is a Bosch side drive magneto bracket/mounting plate for mounting and running a magneto on the early, pre-generator Model T Ford engine. $300.00 OBO plus shipping.

R/S,
Jonathan Bodine
jethro10101@AOL.com
406-498-3946

Last post

SOLD
Thank you to the buyer and MTFCA and HCCA.

4 Replies

1523 Views

Last post by jethro
Sun Apr 13, 2025 7:09 pm
FS: Gas Tank (oval) Mounting Brackets

Last post by jethro « Sun Apr 13, 2025 7:06 pm
Replies: 1
by jethro » Fri Apr 11, 2025 6:05 pm

First post

For Sale are two pair of Oval gas tank mounting brackets. $15.00 plus shipping for both pair. Again I think they all will fit into a medium Flat Rate Box.

R/S,
Jonathan Bodine
jethro10101@aol.com

Last post

Sold pending final payment.
Thank you to the buyer and MTFCA.

1 Replies

888 Views

Last post by jethro
Sun Apr 13, 2025 7:06 pm
WTB Rear Hub

Last post by Shrshot « Sun Apr 13, 2025 4:19 pm
Replies: 1
by Shrshot » Sat Apr 12, 2025 5:56 pm

First post

Wanted to buy one rear hub. Need a hub to support rear axles to press axle gears on. Keyway need not be perfect. Thanks, Kent

Last post

Got a hub, thanks MTFCA...

1 Replies

879 Views

Last post by Shrshot
Sun Apr 13, 2025 4:19 pm
WTB 23 TOURING MEL MILLER DRAWINGS

Last post by big2bird « Sun Apr 13, 2025 12:52 pm

by big2bird » Sun Apr 13, 2025 12:52 pm

I cannot find my Mel Miller drawings from way back when.
I would like to buy an original set, decent copy, pdf, whatever in that order.
I have an early 23 touring. Slant windshield, one man top, low hood.
I very much appreciate any help with this quest. Jeff

0 Replies

1946 Views

Last post by big2bird
Sun Apr 13, 2025 12:52 pm
FS: Model T Hand Tools, Misc

Last post by jethro « Sun Apr 13, 2025 11:07 am
Replies: 1
by jethro » Fri Apr 11, 2025 8:49 pm

First post

For Sale miscellaneous hand tools contemporary with Model T and old cars in general. $35.00 for all plus shipping. Should all fit in a medium Flat Rate Box which ships for $19.15.

R/S,
Jonathan Bodine
jethro10101@aol.com

Last post

Sold pending final payment.
Thank you buyer and MTFCA.

1 Replies

911 Views

Last post by jethro
Sun Apr 13, 2025 11:07 am
FS: Speed Wrenches

Last post by jethro « Sun Apr 13, 2025 9:45 am
Replies: 2
by jethro » Fri Apr 11, 2025 5:53 pm

First post

This is a group of old mostly speed wrench type tools. Some are quite common, a few are fairly unusual, at least in my experience. I no longer have need for these, I hope I can find a good home for them. $50.00 plus shipping for the whole group.

R/S,
Jonathan Bodine
jethro10101@aol.com

Last post

Sold pending final payment

2 Replies

927 Views

Last post by jethro
Sun Apr 13, 2025 9:45 am
corner bracket

Last post by Melba Nolan « Sat Apr 12, 2025 11:18 pm
Replies: 2
by Melba Nolan » Tue Jun 18, 2024 5:55 pm

First post

For sale: front corner bracket on passenger side. near crossmember $25 plus postage

20220811_100505.jpg 20220811_100518.jpg

Last post

move to top

2 Replies

1226 Views

Last post by Melba Nolan
Sat Apr 12, 2025 11:18 pm
clutch nut wrench

Last post by Melba Nolan « Sat Apr 12, 2025 11:10 pm
Replies: 4
by Melba Nolan » Tue Oct 22, 2024 9:54 pm

First post

For sale: Ford 5Z1861 clutch nut wrench $50 plus postage

20241022_201852.jpg 20241022_202000.jpg

Last post

move to top

4 Replies

1474 Views

Last post by Melba Nolan
Sat Apr 12, 2025 11:10 pm
WTB 26/27 Roadster rear fender brace

Last post by Henry K. Lee « Sat Apr 12, 2025 9:39 pm
Replies: 1
by JonLevine » Sat Apr 12, 2025 7:44 pm

First post

Looking for a rear fender brace (bracket) for a 26/27 Roadster.

Last post

I believe I have an original stamped steel one. Please send me an email and will double check tomorrow.

1 Replies

718 Views

Last post by Henry K. Lee
Sat Apr 12, 2025 9:39 pm
Model B distributor ( spoken for , thanks MTFCA )

Last post by Gene_French « Sat Apr 12, 2025 9:08 pm

by Gene_French » Sat Apr 12, 2025 9:08 pm

Model B Ford distributor , is centrifugal advance unit designed for 1932 thru 1934 B series 4 cylinder Ford engines ... fits and works very well in Model A engines ... will need cleaning and new shaft bushings , points etc. ... price $90 + $19.15 postage in lower 48 states , actual postage outside this area or INTERNATIONAL ... contact thru MTFCA...

0 Replies

1856 Views

Last post by Gene_French
Sat Apr 12, 2025 9:08 pm
re-babbitted T rods

Last post by Gene_French « Sat Apr 12, 2025 9:02 pm

by Gene_French » Sat Apr 12, 2025 9:02 pm

re-babbitted model T connecting rods ...-.010 diameter ... these rods are from old auto re-builder stock ... X oil grooved and drilled for dippers ...use with -.010 re-ground crankshaft or use Timesaver lapping compound to fit to worn Standard crankshaft ... these rods have been in my storage for over 25 years ... priced at $250 + $19.15 postage...

0 Replies

1877 Views

Last post by Gene_French
Sat Apr 12, 2025 9:02 pm
Covered transportation form Washington state

Last post by Nikko012 « Sat Apr 12, 2025 6:32 pm
Replies: 1
by Nikko012 » Sat Apr 12, 2025 6:21 pm

First post

I have a 20 foot car hauling trailer, looking for a load going East. Resonable rates. Looking for the middle of May. 360 cr1 qqv0

Last post

Covered transportation from Washington State. Sorry, D#)@ computers.

1 Replies

577 Views

Last post by Nikko012
Sat Apr 12, 2025 6:32 pm
Covered transportation for Washington state

Last post by Nikko012 « Sat Apr 12, 2025 6:20 pm

by Nikko012 » Sat Apr 12, 2025 6:20 pm

I have a 20 foot car hauling trailer, looking for a load going East. Resonable rates. Looking for the middle of May. 360 cr1 qqv0

0 Replies

1866 Views

Last post by Nikko012
Sat Apr 12, 2025 6:20 pm
Model B rod cores and parts carburatorSpoken for ...Thanks MTFCA

Last post by Gene_French « Sat Apr 12, 2025 2:58 pm

by Gene_French » Sat Apr 12, 2025 2:58 pm

For sale ... 5 model B Ford 4 cyl. connecting rods for re-babbitt ... B carburator for parts ... mounting flange is broken on front side , otherwise the bowl and shafts are all in re-buildable condition ... i also have a B crankshaft listed on this site ... may find more B items as i dig deeper into my storage sheds ...price for the 5 connecting...

0 Replies

1787 Views

Last post by Gene_French
Sat Apr 12, 2025 2:58 pm
Sold 1909-14 Rear License Plate Bracket

Last post by Harold « Sat Apr 12, 2025 6:08 am
Replies: 2
by Tparts » Fri Apr 11, 2025 7:48 pm

First post

For Sale is an original cast iron license plate bracket. Some light pitting as seen in the photos. Good threads, no cracks and is very straight. $100 plus shipping. Langs 1-800-872-7871

Last post

I would be interested in purchasing it

2 Replies

961 Views

Last post by Harold
Sat Apr 12, 2025 6:08 am
FS: Bands with removable ears ** are spoken for**

Last post by jethro « Fri Apr 11, 2025 8:40 pm
Replies: 1
by jethro » Fri Apr 11, 2025 6:00 pm

First post

For Sale are two sets of bands with removable ears. One set has three narrow bands, the other has two narrow bands and one wide band (wide brake band). One of the six is missing the removable ear. Both sets $40.00 plus shipping, I think they all will fit into a medium flat rate box. These bands need a new home.

R/S,
Jonathan Bodine...

Last post

These bands have been spoken for. Thank you for your interest.

1 Replies

651 Views

Last post by jethro
Fri Apr 11, 2025 8:40 pm
Tractor rear end For Sale

Last post by Tim D « Fri Apr 11, 2025 5:09 pm
Replies: 1
by Tim D » Thu Apr 10, 2025 10:57 am

First post

I have a converted Model T rearend converted into a unknown tractor rearend. pick up only. Beloit WI
$250

Last post

back to the top

1 Replies

886 Views

Last post by Tim D
Fri Apr 11, 2025 5:09 pm
T headlight buckets

Last post by micshotrodgarage « Fri Apr 11, 2025 12:29 pm
Replies: 2
by Gene_French » Fri Apr 11, 2025 10:13 am

First post

for sale ... pair of headlight buckets ... 1 is missing mounting bracket ... for parts ... price $20 + $26 flat rate postage in lower 48 states ... actual postage outside this area or INTERNATIONAL ...will post pictures later today ...contact thru MTFCA site ...Gene French

Last post

Gene E mail sent

2 Replies

749 Views

Last post by micshotrodgarage
Fri Apr 11, 2025 12:29 pm
FS. Model T transmission gear puller #3Z611

Last post by 1902Crest « Fri Apr 11, 2025 12:03 pm
Replies: 1
by 1902Crest » Fri Apr 11, 2025 12:02 pm

First post

Cleaning out tools I'll never use again
Threads good shape. Hex not beat up . $75.00 Mike West mawest729@gmail.com 585 738 1541 livonia ny

Last post

3z611 puller in good condition. $75.00

1 Replies

615 Views

Last post by 1902Crest
Fri Apr 11, 2025 12:03 pm
Maxwell starter generator unit ( spoken for, thanks MTFCA )

Last post by Tadpole « Fri Apr 11, 2025 11:39 am
Replies: 2
by Gene_French » Fri Apr 11, 2025 10:21 am

First post

Not a T part , but may be of interest to members on this site ... this is a Simms-Huff starter generator unit as used on Maxwell cars in teens and early 20's ... have tested on 6 volt and unit runs as a motor ... not sure what was used as a cutout or relay for the generator function ... unit is clean , but is missing any chain or gear to drive the...

Last post

Mr. French, sent you an email.

2 Replies

704 Views

Last post by Tadpole
Fri Apr 11, 2025 11:39 am
Poormans Rajo components

Last post by Gene_French « Fri Apr 11, 2025 11:20 am
Replies: 2
by Gene_French » Thu Apr 10, 2025 2:43 pm

First post

this is a partial set of items needed to build a Poormans Rajo ... i am uncertain who produced this adapter plate , but the design is typical of the eccentric counterbores used in the period conversions ... plate is steel and is surface ground to .980 ... included is a re-buildable 1928 Chev. 2 port cylinder head ( needs rocker arm set ) , the...

Last post

please note: the term POORMAN'S RAJO is just an old term that probably originated during the hay days of early dirt track racing ...was probably used in a condescending manner by well funded racers to minimize the status of less fortunate drivers ( funding) ... NONE of these items interchange with RAJO or any other manufacturers speed parts of the...

2 Replies

1027 Views

Last post by Gene_French
Fri Apr 11, 2025 11:20 am
Gas headlight flint sparkers

Last post by MNToys « Fri Apr 11, 2025 7:56 am
Replies: 2
by MNToys » Mon Feb 10, 2025 9:48 pm

First post

I am selling a pair of flint starters for acetylene headlights. They clamp to the burner. You twist or spin the “key” and a little wheel rotates against a piece of flint and lights you lights. Like a zippo lighter. I’ve never used them. They look clean and I don’t see why they would not work. Might need a to be cleaned inside and oiled-and or...

Last post

Bump to the top

2 Replies

1388 Views

Last post by MNToys
Fri Apr 11, 2025 7:56 am
WTB one piece pan

Last post by Gleaner « Thu Apr 10, 2025 9:19 pm
Replies: 2
by Gleaner » Thu Apr 10, 2025 5:02 pm

First post

I am needing a good one piece pan for my 1909 T engine

Last post

It is not a water pump engine

2 Replies

952 Views

Last post by Gleaner
Thu Apr 10, 2025 9:19 pm
For Sale: 1915-1916 Coil Box

Last post by TRDxB2 « Thu Apr 10, 2025 6:02 pm
Replies: 1
by Ed Fuller » Thu Apr 10, 2025 4:55 pm

First post

SOLD

From my research I believe this to be a 1915-1916 and possibly very early 1917 coil box and lid.

No dents that I can see, it does have some rust pitting. Switch is in very poor shape. Looks like someone has replaced the wood in the past but it obviously needs to be replaced again. All the contacts and porcelain look to be in good shape. A...

Last post

From my research I believe this to be a 1915-1916 and possibly very early 1917 coil box and lid.

No dents that I can see, it does have some rust pitting. Switch is in very poor shape. Looks like someone has replaced the wood in the past but it obviously needs to be replaced again. All the contacts and porcelain look to be in good shape. A couple...

1 Replies

843 Views

Last post by TRDxB2
Thu Apr 10, 2025 6:02 pm
WTB Correct Battery Box Cover

Last post by Ken Buhler « Thu Apr 10, 2025 2:57 pm
Replies: 3
by Ken Buhler » Tue Apr 08, 2025 11:48 pm

First post

I am looking for a very nice original battery box cover to go with Larry Smith's very nice battery box, can you help me?
Shipping to Postal Code V1W 2X6 Canada
Ken Buhler

Last post

Thank you guys, now I know what to look for. Hopefully someone is willing to part with one.

3 Replies

1154 Views

Last post by Ken Buhler
Thu Apr 10, 2025 2:57 pm
timing gear cover

Last post by Melba Nolan « Thu Apr 10, 2025 2:09 pm
Replies: 3
by Melba Nolan » Fri Mar 28, 2025 11:12 pm

First post

For sale: 1926 to 1927 timing gear cover with Ford script. Very good condition $30 plus shipping
20250324_175110.jpg 20250324_175153.jpg

Last post

okay, I was looking in Langs book and they don't show a picture of one.

3 Replies

1535 Views

Last post by Melba Nolan
Thu Apr 10, 2025 2:09 pm
front axle

Last post by Melba Nolan « Thu Apr 10, 2025 11:19 am
Replies: 4
by Melba Nolan » Fri Jun 21, 2024 11:19 pm

First post

for sale: front axle with Ford script, left and right springs perches with nuts and a bushing $175 plus shipping
in good condition just needs cleaned, only surface rust.
20240619_085254.jpg 20240619_085303.jpg 20240619_085310.jpg

Last post

move to top

4 Replies

2523 Views

Last post by Melba Nolan
Thu Apr 10, 2025 11:19 am
Model T Tire savers

Last post by Unprr « Wed Apr 09, 2025 11:39 pm
Replies: 4
by Unprr » Tue Apr 08, 2025 4:17 pm

First post

Up for bid,or four identical tire saver jacks.
Manufacturer, Ashland Elite co.
Patented OCT 3, 1911

These are duplicates and need the space, in my garage.
All four work as designed and have been cleaned and primed.

I’m looking for offers, plus the shipping for the four.

George Schmidt
Unprr@cox.net

Last post

Thanks for the offers. All four tire savers have been sold.

4 Replies

1451 Views

Last post by Unprr
Wed Apr 09, 2025 11:39 pm
F/s. Rear spool and bearings, axle, pinion gear

Last post by 4ham « Wed Apr 09, 2025 4:01 pm
Replies: 3
by 4ham » Mon Apr 07, 2025 8:20 pm

First post

For sale is a decent rear spool and 2 bearings , a decent axle gear and a pinion gear that show wear. All for 115.00 shipped. P/m or email me if interested. PayPal preferred, but checks are good also.

Last post

Ok, offers?

3 Replies

1055 Views

Last post by 4ham
Wed Apr 09, 2025 4:01 pm
WTB 1917-1925 CHASSIS

Last post by Cody Winters « Wed Apr 09, 2025 2:01 pm

by Cody Winters » Wed Apr 09, 2025 2:01 pm

Wanted: 1917-1925 T chassis, must have full drivetrain, would prefer a running chassis but any condition is acceptable. Posting for a friend who wants to build a T express for his peanut business. **Update** Will also take entire closed or open cab express fitting the before description

0 Replies

1911 Views

Last post by Cody Winters
Wed Apr 09, 2025 2:01 pm
FS Hassler front accessory shock

Last post by TRDxB2 « Wed Apr 09, 2025 1:46 pm
Replies: 2
by Karl Von Neumann » Fri Apr 04, 2025 11:11 am

First post

Front heavy type Hassler shock thus is all I have so it's for parts 40$ plus the ride

Last post

Some more info for it

2 Replies

1098 Views

Last post by TRDxB2
Wed Apr 09, 2025 1:46 pm
WTB 26/27 CHASSIS FIREWALL (FOUND)

Last post by Mark Chaffin « Wed Apr 09, 2025 10:52 am
Replies: 4
by Mark Chaffin » Thu Apr 03, 2025 6:55 pm

First post

I would like to purchase a 26/27 chassis firewall Ford # 3634-L in very good condition for a current project. I stole these pictures from Brad's post. Any help in locating one would be much appreciated. Mark Chaffin (951) 805-0928

97305567-1309-4998-954F-DC21B60BA51C.jpeg

606A29AC-B87C-4858-BFEF-F36B737DCE0B.jpeg

Last post

Found one! Thanks to Steve at Lang's.

4 Replies

1089 Views

Last post by Mark Chaffin
Wed Apr 09, 2025 10:52 am
FS T Jack

Last post by fordrelic « Wed Apr 09, 2025 7:56 am
Replies: 1
by fordrelic » Mon Mar 24, 2025 12:39 pm

First post

For Sale: Model T Jack with Ford Script

Jack works but I found a hair line crack.
Look at picture and crack is between the top two openings for screw shaft.

$20 plus shipping

T jack.jpg

Last post

to the top

1 Replies

1485 Views

Last post by fordrelic
Wed Apr 09, 2025 7:56 am
WTB: One front fender iron FOUND

Last post by Harley_97 « Tue Apr 08, 2025 10:36 pm
Replies: 1
by Ed Fuller » Tue Apr 08, 2025 8:57 pm

First post

Found!

I’m looking for a single 1917-1925 front fender iron.

The pitted and rougher the better. Hoping to match the rough looking one I have.

Last post

Which one would you like? $10.00 each plus shipping

1 Replies

738 Views

Last post by Harley_97
Tue Apr 08, 2025 10:36 pm
FS: Engine front plate for pre-generator engines *AKA Timing Gear plate* Price Adjustment

Last post by jethro « Tue Apr 08, 2025 2:18 pm
Replies: 5
by jethro » Fri Mar 28, 2025 8:33 pm

First post

For Sale is a front plate (AKA timing gear cover) for the pre-generator engines. Appears to be in excellent shape. Although not magnafluxed I see NO signs of cracks or other damage. $85.00 Plus shipping.

Please contact me by email or phone. Thank you for your interest and for looking.

R/S,
Jonathan Bodine
1 406 498 3946

Last post

Back to the Top Please.

5 Replies

1756 Views

Last post by jethro
Tue Apr 08, 2025 2:18 pm
WTB cylinder head outlet for 1915

Last post by Kenny Edmondson « Tue Apr 08, 2025 11:22 am
Replies: 10
by johnr » Mon Mar 31, 2025 2:53 pm

First post

Looking for a cylinder head outlet part #3004.
If you have one you want to sell let me know.
If you could include shipping to 44839 in the price.
Thank you.

Last post

Here’s one I have. Sent you an email also.

10 Replies

2374 Views

Last post by Kenny Edmondson
Tue Apr 08, 2025 11:22 am
FS APCO Style Drag Link & Radius Rod & other anti-rattlers

Last post by TRDxB2 « Tue Apr 08, 2025 11:00 am
Replies: 17
by TRDxB2 » Fri Feb 28, 2025 5:30 pm

First post

Parts are priced as noted - shipping is extra. PayPal or Check
The steel APCO style Tie & radius rod anti-rattlers have been remanufactured with new parts.
--

APCO Drag Link ball caps $30 each 4 left & 6 sold
--
IMG_6890.JPG
--
--
The follow anti-rattlers are group ether as usable or for wall hangers
Usable
U1 & U2 are Perch braces -...

Last post

email sent for 2 drag link ball caps.

There yours pending payment

17 Replies

3273 Views

Last post by TRDxB2
Tue Apr 08, 2025 11:00 am
FS NOS Eveready Mazda Bulbs in box

Last post by TRDxB2 « Mon Apr 07, 2025 9:12 pm
Replies: 9
by TRDxB2 » Thu Oct 10, 2024 5:25 pm

First post

All the bulbs are NOS & have dual tee-pee shaped filaments at equal heights as original. They are 6-8 volts and 21-21 c.p. & fit a headlight base socket. Boxes 1, 2 and 3 each have 10 bulbs with silver color base. Box 4 has 10 bulbs with brass color base over steel. Box 5 just 3 or 4 brass / steel base bulbs and box). I tested all the bulbs for...

Last post

bumppppppppp

9 Replies

4623 Views

Last post by TRDxB2
Mon Apr 07, 2025 9:12 pm
FS: 1909-early 1911 Square Door Hogshead (narrow)

Last post by SurveyKing « Mon Apr 07, 2025 10:13 am
Replies: 1
by Walter Higgins » Mon Mar 31, 2025 9:06 pm

First post

1909-early 1911 Square Door Hogshead (narrow). Likely a reproduction. Removed from a running car.

Price: $850 + shipping.

Please message me through my forum account for more details, or my phone number, so we can text or talk. Thanks!

20250331_205349.jpg
20250331_205428.jpg
20250331_205409.jpg
20250331_205451.jpg

Last post

Walt,
I tried emailing you. Please let me know the measurement of the width center of hole to center of hole at widest point in the front.

Thanks

1 Replies

1388 Views

Last post by SurveyKing
Mon Apr 07, 2025 10:13 am
WTB Steven's front axle yoke resurfacing tool

Last post by Jack Putnam, in Ohio « Sun Apr 06, 2025 5:15 pm
Replies: 13
by Jack Putnam, in Ohio » Fri Jan 31, 2025 6:48 pm

First post

I am searching for the Stevens Front axle facing tool that is used
to reface the inside yoke surfaces. The inside surfaces of the front axle yoke wear and this tool is used to file them perpendicular to the king pin. Please contact me through the forum email. Thank you, Jack [

Last post

And the search continues. There must be a survivor available somewhere.

13 Replies

6907 Views

Last post by Jack Putnam, in Ohio
Sun Apr 06, 2025 5:15 pm
WANTED:Firestone demountable rims

Last post by JSteele « Sun Apr 06, 2025 10:07 am
Replies: 6
by JSteele » Mon Dec 18, 2023 1:10 pm

First post

I'm looking for a couple of 30X3 1/2 Firestone demountable cincher rims. They are held in place by a triangular shaped ring and lugs. Thank you to ever post these pictures earlier.

Last post

I'm still looking for a couple of 30X3 1/2 Firestone demountable cincher rims. The pictures above label them as Type A, but believe they are actually Type F.

6 Replies

1529 Views

Last post by JSteele
Sun Apr 06, 2025 10:07 am
Timer cover 1911-1919

Last post by RGould1910 « Sun Apr 06, 2025 12:22 am
Replies: 2
by ModelT46 » Fri Apr 04, 2025 11:59 am

First post

Here is a early time cover, perhaps 1911-1915. If you know the exact year, post that here. The cover is $75 plus the ride. I will consider offers.

Last post

See how it also has a u shaped channel for holding the fely

2 Replies

973 Views

Last post by RGould1910
Sun Apr 06, 2025 12:22 am
FS: Timer **SOLD**

Last post by mtntee20 « Sat Apr 05, 2025 10:42 pm
Replies: 5
by jethro » Sat Mar 29, 2025 11:30 am

First post

For Sale is an original steel timer with roller. $35.00 plus shipping.

Please contact me by phone or email.

R/S,
Jonathan Bodine
406 498 3946

Last post

Thank You Jonathan.

5 Replies

1716 Views

Last post by mtntee20
Sat Apr 05, 2025 10:42 pm
Cushion spring rivets

Last post by Steves Ts « Sat Apr 05, 2025 7:14 pm
Replies: 3
by Steves Ts » Fri Apr 04, 2025 7:53 am

First post

Wtb, looking to purchase cushion spring rivets. Does anybody know where i can find these special rivets ?
Thanks
Steve Meudt

Last post

Thanks Folks for Your reply's. I should have been more specific on type application. I have different types of coils I would like to replace the points with good used points. However the rivets on some of the points have collapsed rivets which I would like to save . I'll try McMaster Carr.

3 Replies

1095 Views

Last post by Steves Ts
Sat Apr 05, 2025 7:14 pm
FS Tiger Timers

Last post by Tim D « Sat Apr 05, 2025 3:54 pm
Replies: 2
by Tim D » Sat Apr 05, 2025 1:51 pm

First post

I have 4 new Tiger timers with rollers
$35 each includes usps shipping in the USA. Just opened them up they have had a crack repaired. Lowered the price.

Last post

I will look.

2 Replies

816 Views

Last post by Tim D
Sat Apr 05, 2025 3:54 pm
door latch for 1926 model t fordor

Last post by EricMac « Sat Apr 05, 2025 2:27 pm
Replies: 7
by bnchief » Fri Apr 04, 2025 8:40 am

First post

i am looking for a door latch for the front passenger door on a 1926 fordor which means it lock with a key i already got one but i would like to have a spare to refurbish. just message me so we can talk.

Last post

If you can't get the one you have to work let me know, I might have one also.

7 Replies

1112 Views

Last post by EricMac
Sat Apr 05, 2025 2:27 pm
Door for E&J "1908" Right Side Cowl Lamp $25

Last post by model t americana « Sat Apr 05, 2025 11:28 am
Replies: 3
by Rodger Erickson » Thu Jul 04, 2024 11:44 am

First post

FS: One E&J 1908 Side Door for Right Side Cowl Lamp, w/ brass frame and new beveled glass. Should fit E & J lanterns from 1909 - 1912 but some filing and fitting may be needed. Unpolished. Asking $25 not including shipping.

ejrdr01.jpg

ejrdr02jpg

Thanks for looking!

Last post

Rodger If you have one left, I’ll take 1. Thanks for posting..Dean…Model T Americana

3 Replies

1556 Views

Last post by model t americana
Sat Apr 05, 2025 11:28 am
More Free Stuff: 4' Length of REX #80 Roller Chain (GONE)

Last post by KBurket « Sat Apr 05, 2025 10:33 am
Replies: 4
by Rodger Erickson » Sun Mar 09, 2025 2:35 pm

First post

Free: one piece of roller chain, probably ca. 1900-1920, Size 80. 1 pitch, 5/8 roller width, 5/8 roller diameter. Appox 4' length. This chain is interesting because each link is held together with cotter pins, so effectively every single link is a master link. It's covered in surface rust which makes it stiff so it will have to be cleaned somehow....

Last post

I’m interested.
Sending an email.

4 Replies

1293 Views

Last post by KBurket
Sat Apr 05, 2025 10:33 am
WTB 3 30x3 1/2 Demountable Rims

Last post by Allan « Thu Apr 03, 2025 11:53 pm
Replies: 4
by 25tfire » Wed Apr 02, 2025 2:21 pm

First post

In need of 3 30 x 3 1/2 demountable rims in usable condition. Thanks Jim

Last post

Jim, if you have Hayes wheels you are in luck. Not only will they take Hayes rims but they will also take all the other fixed lug variants. Being Hayes you do need rims with fixed lugs.

Allan from down under.

4 Replies

1132 Views

Last post by Allan
Thu Apr 03, 2025 11:53 pm
WTB: used script floor mat

Last post by frontyboy « Thu Apr 03, 2025 11:11 pm

by frontyboy » Thu Apr 03, 2025 11:11 pm

WTB old script floor mat. Used but usable condition using it in an older restoration 1915 roadster.

brasscarguy@comcast.net 2ho6 919-1949(Seattle)

0 Replies

1749 Views

Last post by frontyboy
Thu Apr 03, 2025 11:11 pm
WTB Whitewall Tires

Last post by Bill Everett « Thu Apr 03, 2025 10:03 pm

by Bill Everett » Thu Apr 03, 2025 10:03 pm

I'd like to buy two (2) of the 30 x 3 whitewall tires, and one (1) 30 x 3-1/2 whitewall tire, just like in the picture.

Please e-mail me a picture of the front of the tire(s) you have, as well as a picture of the back of the tire, showing the size.

Or, text to me at 901-496-8795.

Thank you.

Bill Everett

Model T Whitewall Tire 30X3.jpeg

0 Replies

1567 Views

Last post by Bill Everett
Thu Apr 03, 2025 10:03 pm
oil checker SOLD

Last post by kevinf « Thu Apr 03, 2025 8:09 pm
Replies: 1
by Melba Nolan » Thu Apr 03, 2025 5:00 pm

First post

For sale: crankcase oil checker 1909/1927 $15 plus shipping

20250327_182955.jpg 20250327_182950.jpg

Last post

Just sent you and email,
thanks
Kevin

1 Replies

700 Views

Last post by kevinf
Thu Apr 03, 2025 8:09 pm
hub puller

Last post by Melba Nolan « Thu Apr 03, 2025 3:38 pm
Replies: 1
by Melba Nolan » Thu Apr 03, 2025 2:52 pm

First post

For sale: hub puller $75 plus shipping

20240618_170139.jpg

Last post

sold pending payment

1 Replies

642 Views

Last post by Melba Nolan
Thu Apr 03, 2025 3:38 pm
FS: Allen HCCT, restored, very nice condition.

Last post by Walter Higgins « Wed Apr 02, 2025 10:16 pm
Replies: 1
by Walter Higgins » Mon Mar 31, 2025 11:26 am

First post

Here is a very nice Allen HCCT that I'm listing for a friend. It is currently located near Princeton, NJ. I'll be passing near there soon and, if it helps, I can bring it down near Gettysburg, PA. Local pickup only. No shipping. If you commit to buy and you'd like me to move it down my way, speak up soon so I can adjust my travel plans.

Price:...

Last post

Back to top. Make an offer if you're interested. I'm happy to talk by phone. Just shoot me a PM or email. Thanks!

1 Replies

1348 Views

Last post by Walter Higgins
Wed Apr 02, 2025 10:16 pm
FS Brass G. Piel Company Long Horn (SOLD)

Last post by MTPhono « Wed Apr 02, 2025 8:06 pm
Replies: 2
by ThreePedalTapDancer » Wed Apr 02, 2025 4:56 pm

First post

Original heavy solid brass G. Piel Company Long Horn. This is a beautiful all-brass hand operated horn. It is in great condition, no dents or cracks on bell. Weighs 7 lbs, 8.5 length, 6 inch diameter bell. It lets out a loud “AAAWHOOO!” when the plunger is pushed. The internals are very clean, lubed, and in wonderful condition, and operate as...

Last post

Email sent - Scott

2 Replies

809 Views

Last post by MTPhono
Wed Apr 02, 2025 8:06 pm
WTB Ford Script For Attached Project

Last post by 1925 Touring « Wed Apr 02, 2025 6:35 pm
Replies: 2
by Bill Everett » Wed Apr 02, 2025 4:30 pm

First post

Model T Farm Roadster Body-1.JPG

I'd like to find a brass Ford script to attach to the outside of the shown tailgate, inside the channel which will be painted black.

Can anyone steer me to where I may find the brass script?

Thank you.

Bill Everett

Last post

The major parts vendors, langs, and snyders has them as well.

2 Replies

1072 Views

Last post by 1925 Touring
Wed Apr 02, 2025 6:35 pm
WTB 3 30x3 1/2 Demountable Rims

Last post by 25tfire « Wed Apr 02, 2025 2:09 pm

by 25tfire » Wed Apr 02, 2025 2:09 pm

In need of 3 30 x 3 1/2 demountable rims in usable condition. Thanks Jim

0 Replies

1681 Views

Last post by 25tfire
Wed Apr 02, 2025 2:09 pm
WTB 4 Used 30x3 1/2 Black Tires

Last post by 25tfire « Wed Apr 02, 2025 2:01 pm

by 25tfire » Wed Apr 02, 2025 2:01 pm

Needing 4 30 x 3 1/2 tires in good usable condition, any brand is fine. Thanks Jim

0 Replies

1650 Views

Last post by 25tfire
Wed Apr 02, 2025 2:01 pm
FS 26-7 headlight bar

Last post by Karl Von Neumann « Wed Apr 02, 2025 1:36 pm
Replies: 3
by Karl Von Neumann » Sat Mar 08, 2025 12:09 pm

First post

Decent head light bar few blemishes nothing major $100 plus the ride

Last post

Move to top

3 Replies

1202 Views

Last post by Karl Von Neumann
Wed Apr 02, 2025 1:36 pm
Fs brass holley body

Last post by Karl Von Neumann « Wed Apr 02, 2025 1:34 pm

by Karl Von Neumann » Wed Apr 02, 2025 1:34 pm

Decent looking brass holey carb body bowl is rusty inside 60$ plus the ride

0 Replies

1600 Views

Last post by Karl Von Neumann
Wed Apr 02, 2025 1:34 pm
FS 1913 Ford Engine

Last post by KimDobbins « Wed Apr 02, 2025 10:25 am
Replies: 6
by KimDobbins » Tue Feb 04, 2025 12:02 pm

First post

For sale is a complete 1913 T engine. This looks like a very nice engine, Ford .005 pistons, original valves. SR number 190635, that places it in early January 1913. $3000.00. located in Los Angeles. kdmks AT att.net.

Last post

Still for sale

6 Replies

4704 Views

Last post by KimDobbins
Wed Apr 02, 2025 10:25 am
FS: Master carb (SOLD)

Last post by mklooksup « Wed Apr 02, 2025 9:29 am
Replies: 7
by tselliott » Mon Oct 16, 2023 12:46 pm

First post

Here is a really nice Master carb. It is missing the air inlet piece. Stan Howe thought these were the best carbs for a go fast speedster. You don’t often see these for sale.
$350 plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Have you run this carb on a Model T?

7 Replies

2318 Views

Last post by mklooksup
Wed Apr 02, 2025 9:29 am
SOLD: Brass Radiator for 1913

Last post by GatorsModelT « Tue Apr 01, 2025 11:04 pm
Replies: 1
by GatorsModelT » Thu Mar 13, 2025 9:22 pm

First post

SOLD: USED brass radiator for a 1913 Model T. Can deliver to Duncan, OK Swap Meet next week. Make Offer ! Contact Eric Gator Gould here through MTFCA website.

Last post

SOLD This Item

1 Replies

1455 Views

Last post by GatorsModelT
Tue Apr 01, 2025 11:04 pm
SOLD: 1919-22 Restored Turtle Deck

Last post by GatorsModelT « Tue Apr 01, 2025 11:00 pm

by GatorsModelT » Tue Apr 01, 2025 11:00 pm

SOLD 1919-22 Restored Turtle Deck.

0 Replies

1656 Views

Last post by GatorsModelT
Tue Apr 01, 2025 11:00 pm
FOR SALE: 1919-22 Restored Turtle Deck Ready to Install

Last post by GatorsModelT « Tue Apr 01, 2025 10:56 pm
Replies: 3
by GatorsModelT » Thu Mar 13, 2025 11:24 pm

First post

FOR SALE: 1919-22 Turtle Deck Has been restored and is ready to install. Very Nice. $850.00 Going to Duncan, OK Swap Meet next week Can deliver there. Contact Eric Gator Gould here on MTFCA website.

Last post

SOLD this Item.

3 Replies

1117 Views

Last post by GatorsModelT
Tue Apr 01, 2025 10:56 pm
FS: Original Ford Battery

Last post by ModelTWoods « Tue Apr 01, 2025 8:16 pm
Replies: 5
by WaltM » Tue Apr 01, 2025 11:14 am

First post

For Sale, original model T battery. Marked Ford . No longer available. Thanks

Last post

Read the original post. He signed it Abe Pro Full :roll:

Eric

I missed that. I was responding to Humble's post.

5 Replies

1378 Views

Last post by ModelTWoods
Tue Apr 01, 2025 8:16 pm
WTB Stewart speedometer swivel

Last post by Layden Butler « Tue Apr 01, 2025 4:21 pm
Replies: 3
by Allan » Sun Mar 30, 2025 5:52 pm

First post

Jason, there are variations in these.Specifying a year would help. Left or right rotation would help too.

Allan from down under.

Last post

This is a modern replacement for the 2 1/2 to I ratio right handed swivel for Model T Fords using Stewart swivel #1913. This will be the last swivel you ever have to deal with, it will outlast You! SOLD

3 Replies

1332 Views

Last post by Layden Butler
Tue Apr 01, 2025 4:21 pm
FS: Radiator caps

Last post by jethro « Tue Apr 01, 2025 9:57 am
Replies: 1
by jethro » Sat Mar 29, 2025 11:35 am

First post

For Sale are three Radiator caps. Appear to be originals. In nice condition with some patina. $10.00 each plus shipping. Buy several things and I will try to ship them together to save on shipping. Thanks for looking.

Please contact me by phone or email.

R/S,
Jonathan Bodine
406 498 3946

Last post

Back to top with price reduction to $5.00 each plus shipping.

1 Replies

1234 Views

Last post by jethro
Tue Apr 01, 2025 9:57 am
FS: brass era speedster gas tank brackets (new price)

Last post by Nate22huckster « Mon Mar 31, 2025 4:15 pm
Replies: 5
by Nate22huckster » Tue Feb 11, 2025 10:04 pm

First post

For sale: Two gas tank brackets for a 14” ~ 15” round tank.
1.5” wide brass castings. They will need final sanding and polishing. Will look spectacular on your brass era speedster; Model-T, Simplex, Packard etc…
$200 plus shipping. Please contact me through P.M. or email thru this website.

E4E4F1CD-E8BA-41CC-891A-652473A6F07E.jpeg...

Last post

Once more to the top please

5 Replies

2048 Views

Last post by Nate22huckster
Mon Mar 31, 2025 4:15 pm
FS 1915 & later 30x3 Wheels

Last post by 25tfire « Mon Mar 31, 2025 1:46 pm

by 25tfire » Mon Mar 31, 2025 1:46 pm

In good condition some with ball bearings, spokes are in good condition also, 2 1915 type front and 2 later front wheels. $350 for the 15's and $300 for the later ones. All are 30x3 Clincher style with good usable edges. Plus shipping in US, Pictures to your email or text. Jim nine7zero 37three 88six 4.

0 Replies

2013 Views

Last post by 25tfire
Mon Mar 31, 2025 1:46 pm
Tube clamp FS

Last post by Dan Hatch « Mon Mar 31, 2025 6:10 am
Replies: 3
by Dan Hatch » Wed Mar 26, 2025 4:26 pm

First post

Here is a tube clamp for patching tube. Not sure if it is for hot patch cause it has a pan with it. You look and decide. $10 + shipping. Email me by forum not PM . Thanks Dan
IMG_4313.jpeg
IMG_4315.jpeg

Last post

Back to the top

3 Replies

1425 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:10 am
Model A exhaust clamp FS got more

Last post by Dan Hatch « Mon Mar 31, 2025 6:10 am
Replies: 4
by Dan Hatch » Sun Mar 09, 2025 1:25 pm

First post

I know some of yous guys have a Model A. So I thought I’d post these here before I post them other places.
New A exhaust clamps. $10 each + shipping. Email me at address in pictures. If this too Off Topic please move it. Thanks Dan
IMG_4279.jpeg
IMG_4280.jpeg
IMG_0260.jpeg

Last post

Back to the top

4 Replies

1584 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:10 am
3/06/25 NEW STEVENS FRONT AXLE TOOLING RUN

Last post by Dan Hatch « Mon Mar 31, 2025 6:08 am
Replies: 12
by Dan Hatch » Thu Mar 06, 2025 3:37 pm

First post

I have been approached about making another run of Stevens Front Axle Tool Reamers and Taps. I will only do this if 12 people come forward to commit to a set. I don’t have a price as of now but it will be as much as last set and maybe more. Tool steel goes up almost every month and we all know where it is made.
The pictures are of the tooling....

Last post

Back to the top

12 Replies

2547 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:08 am
Dill valve stem covers FS

Last post by Dan Hatch « Mon Mar 31, 2025 6:08 am
Replies: 1
by Dan Hatch » Sat Mar 29, 2025 2:06 pm

First post

Here are 2 Dill stem covers. One is 2 3/4” long the other is 2 1/2” long. There are different diameter too. See pictures. $20 for pair + shipping. Email me by forum. Thanks Dan
IMG_4321.jpeg
IMG_4322.jpeg

Last post

Back to the top

1 Replies

955 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:08 am
More A Parts FS

Last post by Dan Hatch « Mon Mar 31, 2025 6:07 am
Replies: 2
by Dan Hatch » Wed Mar 26, 2025 3:26 pm

First post

Here are a couple A upper distributor plates new older reproduction. $10 each + shipping. Email me by forum for them. No PM they get lost. Thanks Dan
IMG_4303.jpeg
IMG_4309.jpeg

Last post

Back to the top

2 Replies

1285 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:07 am
Wtb luggage rack

Last post by WorldChamp1914 « Sun Mar 30, 2025 8:35 pm
Replies: 4
by Steves Ts » Sun Mar 30, 2025 8:48 am

First post

Wtb
Poor condition luggage rack with good mounting brackets . I plan to reuse the brackets on a running board tool box.
Thanks
Steve Meudt

Last post

Are clamps available for sale?

4 Replies

1229 Views

Last post by WorldChamp1914
Sun Mar 30, 2025 8:35 pm
FS: NOS 26/27 Rear Spring Perches

Last post by Stephen_heatherly « Sun Mar 30, 2025 8:00 pm
Replies: 1
by Stephen_heatherly » Thu Mar 27, 2025 12:52 am

First post

Here we have a beautiful pair of 26/27 rear spring perches. They appear to never have been used and are likely nos. Both are ford script and have perfect threads. Included is a pair of nuts in equally nice condition. Even the original oilers are intact and usable. These are becoming difficult to find, especially ones as nice as these. $150 plus...

Last post

Bump to the top

1 Replies

1135 Views

Last post by Stephen_heatherly
Sun Mar 30, 2025 8:00 pm
Diff carrier FS

Last post by Dan Hatch « Sun Mar 30, 2025 2:01 pm

by Dan Hatch » Sun Mar 30, 2025 2:01 pm

Here is a carrier out of T rear end. Has both halves, the spider with gears and bolts. Locking pins for thrust washers look good. Ring gear is there but don’t know if it’s good enough to use, your choice. See pictures. $45 + shipping. Email me by forum. Dan
IMG_4323.jpeg
IMG_4324.jpeg
IMG_4325.jpeg
IMG_4326.jpeg

0 Replies

1942 Views

Last post by Dan Hatch
Sun Mar 30, 2025 2:01 pm
FS Used Aftermarket 'T' Water Pumps $10 each

Last post by Rodger Erickson « Sun Mar 30, 2025 1:45 pm

by Rodger Erickson » Sun Mar 30, 2025 1:45 pm

FS Three used water pumps:
Top: Eskimo water pump, turns freely, front pulley is damaged
Center: Jewel water pump, turns freely
Bottom: Unbranded water pump, a real typical generic pump, looks restorable
Asking $10 each or $25 for all three, shipping not included.

twpmp01.jpg

Thanks for looking!

0 Replies

1779 Views

Last post by Rodger Erickson
Sun Mar 30, 2025 1:45 pm
FS: Ruckstell shifters (SOLD)

Last post by KWTownsend « Sun Mar 30, 2025 1:37 am
Replies: 2
by tselliott » Sat Mar 29, 2025 2:16 am

First post

One is a Hall Scott shifter and has an additional bracket on it that has “Truck” embossed on it.
The other is a Ruckstell shifter that someone has bent the shaft. It could be straightened very easily.
$150 each plus shipping
Scott Elliott
971-5O6-94O2

Last post

The TT truck has the battery by the running board so the lineage goes straight back to the shift lock. In standard chassis the rod has to cross over the drive shaft to dodge the battery.

: ^ )

Keith

2 Replies

1167 Views

Last post by KWTownsend
Sun Mar 30, 2025 1:37 am

New Topic

9742 topics

Page 18 of 98
- Jump to page:
Previous
1
…
16
17
18
19
20
…
98
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum