Classifieds - Parts - Page 26

Classifieds - Parts

New Topic

10441 topics

Page 26 of 105
- Jump to page:
Previous
1
…
24
25
26
27
28
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

84045 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS 1915 & later 30x3 Wheels

Last post by 25tfire « Mon Mar 31, 2025 1:46 pm

by 25tfire » Mon Mar 31, 2025 1:46 pm

In good condition some with ball bearings, spokes are in good condition also, 2 1915 type front and 2 later front wheels. $350 for the 15's and $300 for the later ones. All are 30x3 Clincher style with good usable edges. Plus shipping in US, Pictures to your email or text. Jim nine7zero 37three 88six 4.

0 Replies

2061 Views

Last post by 25tfire
Mon Mar 31, 2025 1:46 pm
Tube clamp FS

Last post by Dan Hatch « Mon Mar 31, 2025 6:10 am
Replies: 3
by Dan Hatch » Wed Mar 26, 2025 4:26 pm

First post

Here is a tube clamp for patching tube. Not sure if it is for hot patch cause it has a pan with it. You look and decide. $10 + shipping. Email me by forum not PM . Thanks Dan
IMG_4313.jpeg
IMG_4315.jpeg

Last post

Back to the top

3 Replies

1483 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:10 am
Model A exhaust clamp FS got more

Last post by Dan Hatch « Mon Mar 31, 2025 6:10 am
Replies: 4
by Dan Hatch » Sun Mar 09, 2025 1:25 pm

First post

I know some of yous guys have a Model A. So I thought I’d post these here before I post them other places.
New A exhaust clamps. $10 each + shipping. Email me at address in pictures. If this too Off Topic please move it. Thanks Dan
IMG_4279.jpeg
IMG_4280.jpeg
IMG_0260.jpeg

Last post

Back to the top

4 Replies

1638 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:10 am
3/06/25 NEW STEVENS FRONT AXLE TOOLING RUN

Last post by Dan Hatch « Mon Mar 31, 2025 6:08 am
Replies: 12
by Dan Hatch » Thu Mar 06, 2025 3:37 pm

First post

I have been approached about making another run of Stevens Front Axle Tool Reamers and Taps. I will only do this if 12 people come forward to commit to a set. I don’t have a price as of now but it will be as much as last set and maybe more. Tool steel goes up almost every month and we all know where it is made.
The pictures are of the tooling....

Last post

Back to the top

12 Replies

2654 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:08 am
Dill valve stem covers FS

Last post by Dan Hatch « Mon Mar 31, 2025 6:08 am
Replies: 1
by Dan Hatch » Sat Mar 29, 2025 2:06 pm

First post

Here are 2 Dill stem covers. One is 2 3/4” long the other is 2 1/2” long. There are different diameter too. See pictures. $20 for pair + shipping. Email me by forum. Thanks Dan
IMG_4321.jpeg
IMG_4322.jpeg

Last post

Back to the top

1 Replies

984 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:08 am
More A Parts FS

Last post by Dan Hatch « Mon Mar 31, 2025 6:07 am
Replies: 2
by Dan Hatch » Wed Mar 26, 2025 3:26 pm

First post

Here are a couple A upper distributor plates new older reproduction. $10 each + shipping. Email me by forum for them. No PM they get lost. Thanks Dan
IMG_4303.jpeg
IMG_4309.jpeg

Last post

Back to the top

2 Replies

1313 Views

Last post by Dan Hatch
Mon Mar 31, 2025 6:07 am
Wtb luggage rack

Last post by WorldChamp1914 « Sun Mar 30, 2025 8:35 pm
Replies: 4
by Steves Ts » Sun Mar 30, 2025 8:48 am

First post

Wtb
Poor condition luggage rack with good mounting brackets . I plan to reuse the brackets on a running board tool box.
Thanks
Steve Meudt

Last post

Are clamps available for sale?

4 Replies

1277 Views

Last post by WorldChamp1914
Sun Mar 30, 2025 8:35 pm
FS: NOS 26/27 Rear Spring Perches

Last post by Stephen_heatherly « Sun Mar 30, 2025 8:00 pm
Replies: 1
by Stephen_heatherly » Thu Mar 27, 2025 12:52 am

First post

Here we have a beautiful pair of 26/27 rear spring perches. They appear to never have been used and are likely nos. Both are ford script and have perfect threads. Included is a pair of nuts in equally nice condition. Even the original oilers are intact and usable. These are becoming difficult to find, especially ones as nice as these. $150 plus...

Last post

Bump to the top

1 Replies

1171 Views

Last post by Stephen_heatherly
Sun Mar 30, 2025 8:00 pm
Diff carrier FS

Last post by Dan Hatch « Sun Mar 30, 2025 2:01 pm

by Dan Hatch » Sun Mar 30, 2025 2:01 pm

Here is a carrier out of T rear end. Has both halves, the spider with gears and bolts. Locking pins for thrust washers look good. Ring gear is there but don’t know if it’s good enough to use, your choice. See pictures. $45 + shipping. Email me by forum. Dan
IMG_4323.jpeg
IMG_4324.jpeg
IMG_4325.jpeg
IMG_4326.jpeg

0 Replies

1977 Views

Last post by Dan Hatch
Sun Mar 30, 2025 2:01 pm
FS Used Aftermarket 'T' Water Pumps $10 each

Last post by Rodger Erickson « Sun Mar 30, 2025 1:45 pm

by Rodger Erickson » Sun Mar 30, 2025 1:45 pm

FS Three used water pumps:
Top: Eskimo water pump, turns freely, front pulley is damaged
Center: Jewel water pump, turns freely
Bottom: Unbranded water pump, a real typical generic pump, looks restorable
Asking $10 each or $25 for all three, shipping not included.

twpmp01.jpg

Thanks for looking!

0 Replies

1819 Views

Last post by Rodger Erickson
Sun Mar 30, 2025 1:45 pm
FS: Ruckstell shifters (SOLD)

Last post by KWTownsend « Sun Mar 30, 2025 1:37 am
Replies: 2
by tselliott » Sat Mar 29, 2025 2:16 am

First post

One is a Hall Scott shifter and has an additional bracket on it that has “Truck” embossed on it.
The other is a Ruckstell shifter that someone has bent the shaft. It could be straightened very easily.
$150 each plus shipping
Scott Elliott
971-5O6-94O2

Last post

The TT truck has the battery by the running board so the lineage goes straight back to the shift lock. In standard chassis the rod has to cross over the drive shaft to dodge the battery.

: ^ )

Keith

2 Replies

1205 Views

Last post by KWTownsend
Sun Mar 30, 2025 1:37 am
FS: Lettered Pedals

Last post by M.M.Ryan « Sat Mar 29, 2025 11:08 pm
Replies: 4
by jethro » Fri Mar 28, 2025 8:18 pm

First post

For Sale are two lettered pedals, Reverse and Brake. Minimal wear on reverse, a little wear on the brake on the right side. Letters very prominent. $50.00 plus shipping.

Please contact me by email or phone. Thank you for your interest and for looking.

R/S,
Jonathan Bodine
1 406 498 3946

Last post

Jonathan, I enjoyed taking to you ,no problem selling the pedals, I look forward to looking at the pictures of your 1913 T Ford thanks for sending the pictures.

Matt

4 Replies

1248 Views

Last post by M.M.Ryan
Sat Mar 29, 2025 11:08 pm
Schrader valve stem covers FS

Last post by Dan Hatch « Sat Mar 29, 2025 6:42 pm
Replies: 2
by Dan Hatch » Sat Mar 29, 2025 1:54 pm

First post

Here are 5 Schrader covers with rim nuts. 2 3/8” long. See picture.
Some may be NOS, some used. $50 + shipping. Email me by forum. Thanks Dan
IMG_4320.jpeg

Last post

Sold pending payment

2 Replies

1009 Views

Last post by Dan Hatch
Sat Mar 29, 2025 6:42 pm
FS: Nice accessory switch for ignition, lights and horn.

Last post by TPrez1923@aol.com « Sat Mar 29, 2025 3:41 pm
Replies: 5
by TPrez1923@aol.com » Thu Feb 20, 2025 3:17 pm

First post

Cool switch dash mount great for a speedster. Ignition, lights, and horn button. Very positive Ignition and lights levers. Asking $125.00 plus shipping. Contact Mark with questions.

Last post

Thank you so much.

5 Replies

1864 Views

Last post by TPrez1923@aol.com
Sat Mar 29, 2025 3:41 pm
FS: Babbitt Mold - Sold

Last post by jethro « Sat Mar 29, 2025 1:00 pm
Replies: 1
by jethro » Sat Mar 29, 2025 11:27 am

First post

For Sale is what appears to be an original adjustable babbitt mold. Appears solid. Just needs a little cleaning and lubrication. $75.00 plus shipping. This item will fit in a medium flat rate box. Thanks for looking.

Please contact me by phone or email.

R/S,
Jonathan Bodine
406 498 3946

Last post

Sold Pending final payment.
Thank you buyer. Thank you MTFCA.

1 Replies

900 Views

Last post by jethro
Sat Mar 29, 2025 1:00 pm
Accessory Oil Level Dipstick

Last post by South Park Zephyr « Sat Mar 29, 2025 12:25 pm
Replies: 5
by MNToys » Mon Feb 24, 2025 12:39 pm

First post

Accessory dipstick. Looks great pictures show condition and writing on the dipstick. The housing screws into your pan and the dipstick screws into the housing.
Asking $85 shipped CONUS
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593

IMG_2256.jpeg

IMG_2255.jpeg

IMG_2254.jpeg

Last post

Nick,
I came a week or so back,
I forgot to say thanks

Scott

5 Replies

1641 Views

Last post by South Park Zephyr
Sat Mar 29, 2025 12:25 pm
FOR SALE - FRONT AND REAR SPRING TIE BOLT LUBRICATORS NEW OLDS STOCK IN THE ORIGINAL BOX

Last post by South Park Zephyr « Sat Mar 29, 2025 12:23 pm
Replies: 4
by Jay In Northern Ca. » Thu Mar 20, 2025 9:03 pm

First post

These are brand new and ready to install on your front and rear spring. They force grease between the spring pack leafs from the center out to help smooth out your ride. Asking $45 for the pair plus postage. PLEASE INQUIRE VIA EMAIL THROUGH THE MTFCA WEBSITE - NOT MESSAGING !
FRONT AND REAR SPRING TIE BOLT LUBRICATORS 1.jpg FRONT AND REAR SPRING...

Last post

Thanks Jay
They arrived yesterday

Scott

4 Replies

1326 Views

Last post by South Park Zephyr
Sat Mar 29, 2025 12:23 pm
For sale: 30x3.0 brass stemmed tubes

Last post by South Park Zephyr « Sat Mar 29, 2025 12:22 pm
Replies: 6
by Mike Lebsack-Iowa » Sun Mar 23, 2025 8:44 am

First post

I have 4 new 30x3.0 brass stemmed inner tubes with bridge washers and nuts. These are older and from the time before the problems we had with some of the later imports. Thicker rubber. $125 for the 4 plus actual shipping. Please PM me.

Last post

Thanks Mike
They got here Thursday

Scott

6 Replies

1425 Views

Last post by South Park Zephyr
Sat Mar 29, 2025 12:22 pm
FS SHACKLE SET (SOLD)

Last post by South Park Zephyr « Sat Mar 29, 2025 12:22 pm
Replies: 3
by Mark Chaffin » Tue Mar 25, 2025 12:11 pm

First post

One set of NORS Font shackles. These were once made by Bob's Antique Auto. No longer available.
A good alternative for those on a budget. $55.00 with free domestic shipping. Mark Chaffin (951)805-0928
20250325_090207.jpg

Last post

Thanks for the quick shipping
Always a pleasure doing business

Scott

3 Replies

1141 Views

Last post by South Park Zephyr
Sat Mar 29, 2025 12:22 pm
U-Joint

Last post by John_Aldrich « Sat Mar 29, 2025 12:16 pm

by John_Aldrich » Sat Mar 29, 2025 12:16 pm

Have a nice tight Ford Script u-joint for sale.$75 plus shipping

0 Replies

1987 Views

Last post by John_Aldrich
Sat Mar 29, 2025 12:16 pm
Found.

Last post by Craig Raynor « Sat Mar 29, 2025 11:52 am
Replies: 1
by Dollisdad » Sat Mar 29, 2025 12:41 am

First post

A threaded drag link. Coarse or fine thread will work.

Last post

I have a fine thread I would sell PM me if your still looking

1 Replies

961 Views

Last post by Craig Raynor
Sat Mar 29, 2025 11:52 am
FS: Disc Wheels with rims and tires

Last post by Karl Von Neumann « Sat Mar 29, 2025 11:37 am
Replies: 1
by tselliott » Sat Mar 29, 2025 12:49 am

First post

Here are a couple of Motor Utilities Co. Disc Wheels.
These are the same wheels I have on my speedster and that Steve Tomaso has on his. Unfortunately there are just 2.
These are nice solid wheels with a couple of small dents that don’t really distract from how nice they are. These come with custom aluminum spacers and rear hubs that have nice...

Last post

I've got a single tuarc front I feel the pain of having a miss pair or single wheels

1 Replies

952 Views

Last post by Karl Von Neumann
Sat Mar 29, 2025 11:37 am
FS: Langs front axle bushing reamer

Last post by nathanw90 « Sat Mar 29, 2025 9:03 am

by nathanw90 » Sat Mar 29, 2025 9:03 am

Brand new. Never used it. Had to have the OD of the bushings turned down, the machine shop ended up just honing the bushings to the kingpins.

$80 shipped to your door, PayPal friends, and family, check, or Venmo

IMG_1740.jpeg

0 Replies

2000 Views

Last post by nathanw90
Sat Mar 29, 2025 9:03 am
FS: Accessory Rear Springs SOLD

Last post by Steves Ts « Sat Mar 29, 2025 8:54 am
Replies: 1
by tselliott » Sat Mar 29, 2025 1:57 am

First post

I have never seen this particular type of accessory rear spring before. I rebuilt these with a new coil springs thinking I would use them on my speedster, but have decided to let them go. These came on an early rear end I picked up. I would guess the rear end was about a 1914. They seem to be well made. Leaf spring not included.
$300 plus...

Last post

Hi Scott, I would like to purchase Your auxiliary springs. Please send payment preferences.
Thank You
Steve Meudt

1 Replies

821 Views

Last post by Steves Ts
Sat Mar 29, 2025 8:54 am
FS: Early Crank w/ Iron sleeve handle

Last post by jethro « Sat Mar 29, 2025 8:20 am
Replies: 1
by jethro » Fri Mar 28, 2025 7:56 pm

First post

**(SOLD pending Payment**
For sale are three fairly early hand cranks. These are the type with the iron sleeve, not the later type with the sheet metal sleeve. Sleeves rotate freely. $15.00 each plus shipping.

Please contact me by email or phone. Thank you for your interest and for looking.

R/S,
Jonathan Bodine
1 406 498 3946

Last post

**(SOLD pending Payment** Thank you MTFCA!!

1 Replies

748 Views

Last post by jethro
Sat Mar 29, 2025 8:20 am
FS: Early Crank w/ shapped handle **(SOLD pending Payment**

Last post by jethro « Sat Mar 29, 2025 8:18 am
Replies: 1
by jethro » Fri Mar 28, 2025 8:29 pm

First post

**(SOLD pending Payment**
For Sale is an early crank with the shaped hand grip. This crank is earlier than the cranks with the iron sleeve hank grip. It is for 1914 and earlier. $65.00 plus shipping.

Please contact me by email or phone. Thank you for your interest and for looking.

R/S,
Jonathan Bodine
1 406 498 3946

Last post

**(SOLD pending Payment**

1 Replies

772 Views

Last post by jethro
Sat Mar 29, 2025 8:18 am
water outlet

Last post by Melba Nolan « Fri Mar 28, 2025 10:28 pm

by Melba Nolan » Fri Mar 28, 2025 10:28 pm

For sale: water outlet $30 plus shipping

20250324_171742.jpg

0 Replies

1887 Views

Last post by Melba Nolan
Fri Mar 28, 2025 10:28 pm
FS: **Price drop** 21" wood wheels with rims and tires.

Last post by Walter Higgins « Fri Mar 28, 2025 8:12 pm
Replies: 2
by Walter Higgins » Mon Feb 24, 2025 11:28 pm

First post

These were takeoffs from a 1920 roadster project when they were replaced with a set of wheels correct for the year. Removed from a roadworthy car in the 1980's and in garaged storage most of the car's life (one-family ownership for over 90 years and put on about the 1940's). They'd look great on an unrestored driver.

Four wheels plus a spare rim...

Last post

Price reduced to $950

2 Replies

1376 Views

Last post by Walter Higgins
Fri Mar 28, 2025 8:12 pm
FS: Ford Model 8N Operator's Manual

Last post by jethro « Fri Mar 28, 2025 8:03 pm

by jethro » Fri Mar 28, 2025 8:03 pm

For Sale is an Operator's Manual for a 1948 Ford Tractor Model 8N. Cover somewhat faded , some soiling. This manual shows light use, nonetheless all pages present and in excellent shape. $65.00 plus shipping.

Please contact me by email or phone. Thank you for your interest and for looking.

R/S,
Jonathan Bodine
1 406 498 3946

0 Replies

1709 Views

Last post by jethro
Fri Mar 28, 2025 8:03 pm
WANTED: Early Front Motor Mount

Last post by RajoRacer « Fri Mar 28, 2025 4:51 pm
Replies: 9
by drzomber » Fri Mar 21, 2025 9:37 pm

First post

WTB a complete early motor mount w/ u-bolts and such.

Last post

Are you still looking, Rob ? It would be courteous to let us know.

9 Replies

1837 Views

Last post by RajoRacer
Fri Mar 28, 2025 4:51 pm
Sold front motor mount with acc shock mount

Last post by Shannon_in_Texas « Fri Mar 28, 2025 3:49 pm
Replies: 1
by Karl Von Neumann » Fri Mar 28, 2025 2:17 pm

First post

26 7 front motor mount with accessory shock mount 30 plus the ride

Sold sold sold

Last post

Karl, I will take this. I'll pay with PayPal for this and the gears. About to reply to your email from earlier. Thanks!

1 Replies

698 Views

Last post by Shannon_in_Texas
Fri Mar 28, 2025 3:49 pm
WTB Winfield or U&J Carb

Last post by mklooksup « Fri Mar 28, 2025 3:02 pm
Replies: 3
by mklooksup » Thu Mar 27, 2025 8:51 am

First post

Does anyone have a Winfield or a U&J carburetor that they are willing to sell?
Any rebuildable condition is fine. If you know someone that has one please reach out to them.

Thanks in advance,

Manny

Last post

updraft please

3 Replies

1008 Views

Last post by mklooksup
Fri Mar 28, 2025 3:02 pm
Michelin cover #2 FS

Last post by Dan Hatch « Fri Mar 28, 2025 12:51 pm
Replies: 1
by Dan Hatch » Thu Mar 27, 2025 11:53 am

First post

Here is another Michelin cover but different style. See picture .
$20+ shipping. Email by forum. Not PM. Thanks Dan
IMG_4317.jpeg

Last post

Spoken for pending payment.

1 Replies

971 Views

Last post by Dan Hatch
Fri Mar 28, 2025 12:51 pm
Michelin valve stem cover #1

Last post by Dan Hatch « Fri Mar 28, 2025 12:31 pm
Replies: 2
by Dan Hatch » Thu Mar 27, 2025 11:50 am

First post

Here is an original Michelin valve stem cover. Look at picture, what you see is what you get. $20 + shipping. Email me by forum. Not PM. Thanks Dan
IMG_4318.jpeg

Last post

Send me an email.

2 Replies

905 Views

Last post by Dan Hatch
Fri Mar 28, 2025 12:31 pm
Sold holley carb body

Last post by Karl Von Neumann « Fri Mar 28, 2025 11:47 am
Replies: 2
by Karl Von Neumann » Mon Mar 10, 2025 1:43 pm

First post

Holley carb body sold as a core missing parts shafts do move free SOLD plus the ride

Last post

Move to top

2 Replies

1038 Views

Last post by Karl Von Neumann
Fri Mar 28, 2025 11:47 am
FS warford input shaft

Last post by Karl Von Neumann « Fri Mar 28, 2025 11:46 am
Replies: 2
by Karl Von Neumann » Wed Mar 05, 2025 3:46 pm

First post

Uded Warford input shaft gear is nice square end is nice has a bearing that's up to you to decide if it's good or not. Threads for the locking nuts are good (nut and washer are extra if I have them) the one down fall the intermediate bearing race has some wear ridges in it. Might be able to use lapping compound to polish it out shame since the...

Last post

Move to top

2 Replies

982 Views

Last post by Karl Von Neumann
Fri Mar 28, 2025 11:46 am
Early firewall bracket fs

Last post by CTLeonard « Fri Mar 28, 2025 11:45 am

by CTLeonard » Fri Mar 28, 2025 11:45 am

Only have the one . 45.00 plus shipping. ctleonard64@gmail.com IMG_20250328_104035290.jpg IMG_20250328_104114522.jpg IMG_20250328_104044350.jpg

0 Replies

1689 Views

Last post by CTLeonard
Fri Mar 28, 2025 11:45 am
For Sale: Waterpumps

Last post by jethro « Fri Mar 28, 2025 11:14 am
Replies: 4
by jethro » Sun Mar 23, 2025 3:27 pm

First post

For sale are three accessory water pumps for Model T Ford. The top one says Supreme ; middle one says Superior and the bottom is unmarked. They all turn freely but probably need to be disassembled and rebuilt. $25.00 each plus shipping.
Please contact by email or phone as I don't' regularly check ads or PMs. Thank you.
Reduced Price: $15.00 each...

Last post

Sale fell through so still for sale.

4 Replies

1047 Views

Last post by jethro
Fri Mar 28, 2025 11:14 am
Front shackles set New. FS

Last post by Dan Hatch « Fri Mar 28, 2025 8:10 am
Replies: 2
by Dan Hatch » Wed Mar 26, 2025 4:23 pm

First post

Here is a set of front shackles I don’t need. I opened the bag to show that it is complete. See pictures. $35 + shipping.
Email me by forum not PM they get lost and I don’t look.
Thanks Dan
IMG_4310.jpeg
IMG_4312.jpeg

Last post

Sold pending payment

2 Replies

928 Views

Last post by Dan Hatch
Fri Mar 28, 2025 8:10 am
Early Round Coil mag coil FS 12 to 14

Last post by Dan Hatch « Fri Mar 28, 2025 7:20 am
Replies: 12
by Dan Hatch » Sun Feb 09, 2025 3:39 pm

First post

Here is an early round coil cast iron mag coil. This coil looks to be rebuilt but it don’t know my who. Looks to be a very professional job. I have powered it to check if the coil poles are right. Checked out just fine. $180 + shipping. No core.
Email me at address in pictures. Dan
IMG_4232.jpeg
IMG_4234.jpeg
IMG_4233.jpeg
IMG_0260.jpeg

Last post

Back to top

12 Replies

2863 Views

Last post by Dan Hatch
Fri Mar 28, 2025 7:20 am
For sale: brass rim wind dash clock

Last post by Mike Lebsack-Iowa « Thu Mar 27, 2025 8:41 pm
Replies: 2
by Mike Lebsack-Iowa » Mon Mar 24, 2025 3:17 pm

First post

I have a King’s Crown rim wind brass dash clock. Pat#’s
1907, 1908, 1910,and 1911. Brass case has no cracks, nickel rim winder very good, glass/face/ hands all nice. Not working and will need a cleaning and lubrication I am sure. Nothing rattling around inside. Pictures available by text or email if you PM me. My Forum email is incorrect so please...

Last post

Clock sold pending payment.

2 Replies

995 Views

Last post by Mike Lebsack-Iowa
Thu Mar 27, 2025 8:41 pm
WTB HORN 26-27

Last post by tom leroux « Thu Mar 27, 2025 11:53 am

by tom leroux » Thu Mar 27, 2025 11:53 am

WTB HORN 26-27 WITH BRACKETS IN GOOD WORNING ORDER
TOM

0 Replies

1929 Views

Last post by tom leroux
Thu Mar 27, 2025 11:53 am
WTB HORN 26-27

Last post by tom leroux « Thu Mar 27, 2025 11:52 am

by tom leroux » Thu Mar 27, 2025 11:52 am

WTB HORN 26-27 WITH BRACKETS
TOM

0 Replies

1816 Views

Last post by tom leroux
Thu Mar 27, 2025 11:52 am
Wanted to buy: 1- 30x3.5 white treaded Firestone tire

Last post by Mike Lebsack-Iowa « Thu Mar 27, 2025 10:06 am
Replies: 2
by Mike Lebsack-Iowa » Sat Mar 15, 2025 8:19 pm

First post

I am looking to buy one white Firestone tire with the typical tread pattern. I have three already and yes they are kind of yellow but that is fine for what I have planned. If you have one or a pair I would be interested. Please contact me using the PM function on this site. I can pick them up at Duncan. Thanks, Mike

Last post

Back to the top, does anyone by chance have one or two of the discolored tires that you want to cash in? Please use PM messaging. Thanks, Mike

2 Replies

949 Views

Last post by Mike Lebsack-Iowa
Thu Mar 27, 2025 10:06 am
WTB Winfield S SR parts-some to trade

Last post by Mark Herdman « Thu Mar 27, 2025 2:27 am

by Mark Herdman » Thu Mar 27, 2025 2:27 am

WTB Winfield S or SR parts-some to trade. Looking for BB or C double ended ball linkage and pressed steel levers, Screws and nuts like in photos. Any help appreciated.

New Bitmap image (2).jpg

20241226_115044.jpg

Mark

0 Replies

1788 Views

Last post by Mark Herdman
Thu Mar 27, 2025 2:27 am
Headlights

Last post by billd « Wed Mar 26, 2025 7:10 pm
Replies: 1
by billd » Tue Mar 25, 2025 10:13 am

First post

For sale: pair of headlights, new reflectors and they have a few scratches, but no dents, good threads. $250.00 plus shipping to lower 48 states. Preferred text message. My number is 419-217-8884.

Last post

Headlights are sold.

1 Replies

866 Views

Last post by billd
Wed Mar 26, 2025 7:10 pm
Electric T horn

Last post by Allan « Wed Mar 26, 2025 6:26 pm
Replies: 5
by Allan » Mon Mar 10, 2025 2:33 am

First post

1920-27 Ford script battery horn. Excellent original. Stripped, cleaned, adjusted, rebuilt and repainted ready to fit.
$200 posted to your door.
20250310_161459.jpg 20250310_161459.jpg
Allan from down under.

Last post

Sorry Tom, It is on its way to Mike.
Thanks for your interest.

Allan from down under.

5 Replies

1601 Views

Last post by Allan
Wed Mar 26, 2025 6:26 pm
Open Car Dash

Last post by Original Smith « Wed Mar 26, 2025 4:07 pm

by Original Smith » Wed Mar 26, 2025 4:07 pm

Want to buy a very late 1925 open car dashboard. They can be identified by a large 1/4 carburetor adjusting hole and larger indentation around it. Would like one in excellent condition. I have lots of earlier ones to trade or sell that have a 3/16 hole. This type of dash uses the 1926 style carburetor adjusting rod that I'm looking for.

0 Replies

1926 Views

Last post by Original Smith
Wed Mar 26, 2025 4:07 pm
FS Original Bevin Bermuda Bell (SOLD)

Last post by ThreePedalTapDancer « Wed Mar 26, 2025 3:41 pm
Replies: 2
by ThreePedalTapDancer » Wed Mar 26, 2025 1:18 pm

First post

Original T era Bevin Bermuda Bell. Excellent original condition, with original faceplate and plunger. Wonderful patina with worn nickel plating. Works perfect, very loud “DING DONG!” and it holds its tone. No damage. Ready to mount and use. 300 includes shipping.

IMG_3045.jpeg

Last post

Email sent.

2 Replies

758 Views

Last post by ThreePedalTapDancer
Wed Mar 26, 2025 3:41 pm
FS: T hand brake extension

Last post by tmodeldriver « Wed Mar 26, 2025 3:26 pm
Replies: 5
by TPrez1923@aol.com » Sat Mar 22, 2025 4:17 pm

First post

For sale- Model T hand brake extension, believed to be NOS. Asking $125.00 OBO plus shipping. Contact Mark with questions.

Last post

Thanks, Mark. I did send you an e-mail to the address in your heading. It has my e-mail address and phone number. If the other deal doesn't work out please let me know. Bob

5 Replies

1397 Views

Last post by tmodeldriver
Wed Mar 26, 2025 3:26 pm
SOLD!!!: L-shaped shackles with Ford Script, adding new bushings, Reduced Price - correct for 1919-1923(I think?)

Last post by Walt Wise « Wed Mar 26, 2025 1:51 pm
Replies: 11
by Walt Wise » Mon Jul 01, 2024 5:00 pm

First post

Here we have for sale two used L-shaped front shackles with Ford script, part #T248B, one with a little more wear than the other, yet still very good condition in my opinion, and now included new bushings for your front leaf springs and perch, I believe they will be perfect without any reaming fitting . Also, just one rear L-shaped shackle with...

Last post

Shackles and bushings have finally found a new home!

Much Thanks MTFCA!!!

Walt Wise

11 Replies

5055 Views

Last post by Walt Wise
Wed Mar 26, 2025 1:51 pm
FS Ford 5Z Tools needed to disassemble a Model T Transmission $125.00

Last post by slang250 « Wed Mar 26, 2025 1:39 pm
Replies: 3
by Tparts » Tue Mar 25, 2025 2:52 pm

First post

5Z-314 Transmission Clutch Drum Puller (Ford Script) and 5Z-326 Transmission Driven Gear Puller ( Ford Script) Both are in very nice condition with excellent threads, not abused. $125 for the pair, plus shipping. Lang’s 1-800-872-7871

Last post

Pullers are spoken for.

Thank You

3 Replies

1183 Views

Last post by slang250
Wed Mar 26, 2025 1:39 pm
30 x 3 1/2 wood wheel

Last post by RajoRacer « Wed Mar 26, 2025 10:36 am
Replies: 3
by Melba Nolan » Tue Mar 25, 2025 10:45 pm

First post

For sale:30 x 3 wood wheel with hub $200 plus shipping

20250318_134533.jpg 20250318_134547.jpg 20250318_134616.jpg

Last post

And - It's a loose lug wheel - approx. 1922.

3 Replies

996 Views

Last post by RajoRacer
Wed Mar 26, 2025 10:36 am
FS: Eisenmann Cross Drive Magneto Front Plate

Last post by jethro « Tue Mar 25, 2025 9:49 pm
Replies: 2
by jethro » Sun Mar 23, 2025 7:45 pm

First post

This is an Eisenmann Magneto Corp. cross drive front plate for the later generator compatible Model T engine. Raised letters on casting say: Model E-20-2. It is a heavy, robust iron casting. Although it has not been magnifluxed I see no cracks or damage. Very nice, rare and desirable piece for a performance engine, speedster, etc. $225.00 plus...

Last post

Eisenmann Cross Drive Magneto Front Plate sold pending payment.
Thanks MTFCA.

2 Replies

796 Views

Last post by jethro
Tue Mar 25, 2025 9:49 pm
For Sale: Bendix Drives

Last post by jethro « Tue Mar 25, 2025 9:47 pm
Replies: 2
by jethro » Sun Mar 23, 2025 3:17 pm

First post

For Sale are 5 Bendix drives I believe for Model T Ford as pictured. $50.00 plus shipping for everything shown in the picture. Please contact me by email or phone, I don't regularly check ad or PMs.
Reduced Price: $25.00 plus shipping
R/S,
Jonathan Bodine
jethro10101@aol.com
1 406 498 3946

Last post

Bendix Drives sold pending payment.
Thanks MTFCA.

2 Replies

740 Views

Last post by jethro
Tue Mar 25, 2025 9:47 pm
FS: Fat Man Steering Wheel

Last post by George House « Tue Mar 25, 2025 6:40 pm
Replies: 1
by George House » Tue Mar 25, 2025 12:02 pm

First post

17”..Lokwell..Pat’d Pending…Toledo, OH…$450
+ FedEx shipping…gwhouse731(at)gmail(dot)com

Last post

This steering wheel spoken for pending payment. Thank you Larry and MTFCA

1 Replies

845 Views

Last post by George House
Tue Mar 25, 2025 6:40 pm
Sold Rare 1911 Holley 4500 Carburetor $1500

Last post by slang250 « Tue Mar 25, 2025 6:35 pm
Replies: 3
by Tparts » Thu Feb 20, 2025 8:22 pm

First post

Hard to find 1911 Holley 4500 Carburetor in good condition, needs to be rebuilt. $1500.00 plus shipping. Lang’s 1-800-872-7871

Last post

Carburetor has been spoken for.

Thank You

3 Replies

1257 Views

Last post by slang250
Tue Mar 25, 2025 6:35 pm
FS 1913-14 Aluminum Intake Manifold $50.00

Last post by Tparts « Tue Mar 25, 2025 4:11 pm

by Tparts » Tue Mar 25, 2025 4:11 pm

For Sale 1913-14 High Volume Intake Manifold. This manifold has been repaired. Please see in the photos. $50.00 plus shipping. Lang’s 1-800-872-7871

0 Replies

1895 Views

Last post by Tparts
Tue Mar 25, 2025 4:11 pm
FS BALL CAPS NORS (SOLD)

Last post by Mark Chaffin « Tue Mar 25, 2025 2:48 pm
Replies: 1
by Mark Chaffin » Tue Mar 25, 2025 1:05 pm

First post

Bronze ball caps (3 pieces) NORS. Two for the front axle drag link (#2728). One for the front radius rod (#2736). No longer available in bronze. $50 value. Get all three pieces for $38.50 with domestic shipping included. Mark Chaffin (951)805-0928

20250325_095449.jpg

20250325_095512.jpg

Last post

Going to Joe. Thanks

1 Replies

749 Views

Last post by Mark Chaffin
Tue Mar 25, 2025 2:48 pm
FS 3 model T keys

Last post by fordrelic « Tue Mar 25, 2025 11:46 am
Replies: 3
by fordrelic » Thu Nov 21, 2024 2:00 pm

First post

For Sale; three model keys 62, 71, 66.

$10 each shipped or all three for $25 shipped to lower 48.

3 Ford keys.jpg 3 Ford keys 2.jpg

Last post

to the top

3 Replies

1644 Views

Last post by fordrelic
Tue Mar 25, 2025 11:46 am
SOLD FS Coil box to restore $25

Last post by fordrelic « Tue Mar 25, 2025 11:37 am
Replies: 3
by fordrelic » Sun Mar 16, 2025 12:29 pm

First post

For Sale: coil box needs complete restore.

$35 plus shipping

Reduced to $25 plus shipping

coil box t.jpg coil box t 2.jpg coil box t 2.jpg coil box t 3.jpg coil box t4.jpg

Last post

I sent message Scott. Thanks fordrelic

3 Replies

1022 Views

Last post by fordrelic
Tue Mar 25, 2025 11:37 am
NOS Runningboard tool box

Last post by Stephen1915 « Tue Mar 25, 2025 10:54 am
Replies: 3
by Stephen1915 » Sun Mar 23, 2025 6:28 pm

First post

A excellent condition never used Hayes box. Still wearing its original dipped enamel finish. Perfect except for one tiny ding as seen in photos. Measurements in the ad. Said to also be the same box that came standard with 1913 Buick Tourings.

$200 + Shipping

314-287-1901

-Stephen

Last post

To the top!

3 Replies

839 Views

Last post by Stephen1915
Tue Mar 25, 2025 10:54 am
Ruckstell LONG-NOSE Shift-Lock

Last post by Stephen1915 « Tue Mar 25, 2025 10:53 am
Replies: 1
by Stephen1915 » Sun Mar 23, 2025 6:42 pm

First post

Long-Nose Ruckstell Shift-Lock. Not seized. In decent shape. Just dusty and dirty.

$250 + Shipping

314-287-2901

-Stephen

Last post

Sold to Adam

1 Replies

655 Views

Last post by Stephen1915
Tue Mar 25, 2025 10:53 am
1923 -1925 NOS Sedan Rear Fenders

Last post by baltrusch « Tue Mar 25, 2025 10:39 am

by baltrusch » Tue Mar 25, 2025 10:39 am

I have several sets of NOS rear fenders for 1923-1925 Sedans. Shop worn but very good. $200 each delivered to Stettler in July

0 Replies

1609 Views

Last post by baltrusch
Tue Mar 25, 2025 10:39 am
FS KC Warford tranny sold pending $

Last post by t-time « Tue Mar 25, 2025 9:03 am
Replies: 1
by geezert » Mon Mar 24, 2025 4:52 pm

First post

I have a good used KC tranny for sale. I took it off my touring car and was going to put it on another t but I bought a ruxtel instead
I have the torque tube and wish bones that were cut down to fit but my buddy needed the axle so its not included
$2950 plus shipping

Last post

email sent

1 Replies

718 Views

Last post by t-time
Tue Mar 25, 2025 9:03 am
FS 1915 touring NOT SOLD

Last post by geezert « Tue Mar 25, 2025 8:32 am
Replies: 8
by geezert » Mon Mar 24, 2025 4:43 pm

First post

I have a 1915 touring car for sale its a driver not a show car by any means. It needs interior replaced but I have been driving it for years like it is, the seams in the front and rear have started to split no padding showing. Recent rebuilt engine and tranny. Had rocky mtn brakes but I'm putting them on my other t so no emergency brake. I have...

Last post

big not nig sorry

8 Replies

1014 Views

Last post by geezert
Tue Mar 25, 2025 8:32 am
Wtɓ looking for rough 26-7 hood

Last post by Powerwagonmaniac1 « Tue Mar 25, 2025 8:26 am
Replies: 2
by Powerwagonmaniac1 » Sun Mar 23, 2025 12:38 pm

First post

Looking for a rough hood wth sides for a 26-7 model T. Can have rust holes dents hinges stuck in rough shape. Needs to still look like a hood for cheap speedster project.

Thanks, Chris Becker.
Fiveohthree896zerozero46

Last post

Thanks, Alan
Let me know.

2 Replies

593 Views

Last post by Powerwagonmaniac1
Tue Mar 25, 2025 8:26 am
Anyone need TW brushes? LAST CALL!

Last post by love2T's « Tue Mar 25, 2025 7:51 am
Replies: 8
by love2T's » Tue Feb 25, 2025 8:47 am

First post

Here's what may very well be your last opportunity to acquire the brush for your TW timer. Gonna try to do both rectangular as well as round brushes. Shop needs minimum order of $160, think ahead re your age, your estimated mileage (they usually last 3-4 thousand miles) and how long you think you'll have your car(s) that use that timer, and order...

Last post

As the subject line says.
I'll be putting in the order to the shop come next Monday.
Check your supply, estimate your needs for the next 2-3 years as I doubt I'll do another run before that. Email me from the profile only please. Thanks MTFCA.

8 Replies

1757 Views

Last post by love2T's
Tue Mar 25, 2025 7:51 am
Simmons carburetor

Last post by Texasroadkill « Tue Mar 25, 2025 12:59 am
Replies: 1
by Corey Walker » Mon Mar 24, 2025 10:49 am

First post

Completely disassembled and cleaned with nice original flapper. New needle and seat, tested float, new choke spring and test run. $220 postpaid to continental USA email: wlkma9@gmail.com

Last post

I'm interested. San Antonio, tx 78222 for shipping.

1 Replies

641 Views

Last post by Texasroadkill
Tue Mar 25, 2025 12:59 am
Bob' Antique Auto Parts Auction

Last post by FATMAN « Mon Mar 24, 2025 10:48 pm
Replies: 2
by FATMAN » Mon Mar 24, 2025 10:21 pm

First post

check it out tons of Model T Parts

Last post

sorry wrong link

2 Replies

662 Views

Last post by FATMAN
Mon Mar 24, 2025 10:48 pm
FS RUCKSTEL RING GEAR AND PINION

Last post by geezert « Mon Mar 24, 2025 8:17 pm
Replies: 4
by geezert » Mon Mar 24, 2025 5:02 pm

First post

I have a almost new high-speed ring and pinion for a ruckstel rear axle
I live in the mountains so high speed won't work for me
I replaced these with correct ones for the mountains
They were installed but never run so not used, but used if you know what I mean....
$350 plus shipping

Last post

13 pinion 39 ring

4 Replies

783 Views

Last post by geezert
Mon Mar 24, 2025 8:17 pm
FS Early Ford short block 1939-41 and NOS parts

Last post by ModelTWoods « Mon Mar 24, 2025 8:03 pm
Replies: 3
by KimDobbins » Mon Mar 24, 2025 5:48 pm

First post

1939-41 short block, no cracks. no pan or heads $400. 3 NOS sets of steel sleeves, $100 per set. 1 set 3 1/16 NOS steel pistons $100. 1 set 3 3/16 NOS steel pistons $175. KR Wilson sleeve remover and install kit $150. Pair of NOS 24 stud heads $150. All plus shipping kdmks AT att.net.

Last post

Oh, that ought to make a T haul a$$ .

3 Replies

763 Views

Last post by ModelTWoods
Mon Mar 24, 2025 8:03 pm
Wanted: Low radiator hood shelves

Last post by Allan « Mon Mar 24, 2025 7:18 pm
Replies: 1
by Stephen_heatherly » Sun Mar 23, 2025 10:48 pm

First post

I'm looking for a set of really nice hood shelves for a low radiator car. These were used 1917-23. I have attached a picture showing what I need. Please send me a personal message. I rarely check my emails.

Thanks,
Stephen

Last post

Stephen, there are minor differences in these which may/may not concern you. The last iteration had the large hole at the front end to take the hard rubber insulation bush. like the one in the centre of your photo. Another, presumably earlier, had a small hole for one wire only and that hole had a pressed in lip around it. Perhaps the earliest one...

1 Replies

515 Views

Last post by Allan
Mon Mar 24, 2025 7:18 pm
Brass L4 carburetor

Last post by mklooksup « Mon Mar 24, 2025 6:07 pm
Replies: 1
by Corey Walker » Mon Mar 24, 2025 11:37 am

First post

Completely disassembled and cleaned, tested float and polished original needle and seat, new choke spring, test run. $165 postpaid to continental USA email: wlkma9@gmail.com

Last post

email sent

1 Replies

545 Views

Last post by mklooksup
Mon Mar 24, 2025 6:07 pm
WTB 26/27 Roadster front seat base

Last post by JonLevine « Mon Mar 24, 2025 5:40 pm
Replies: 12
by JonLevine » Mon Feb 17, 2025 8:36 am

First post

I am looking to buy the front seat base assembly for a 26/27 Roadster. I know these parts were being manufactured by Howell’s Sheetmetal and sold by them and a few vendors but that appears to no longer the case. Either new old stock or original parts will work.

thanks!

Last post

Thanks Mike, yes very much so.

Jon

12 Replies

1965 Views

Last post by JonLevine
Mon Mar 24, 2025 5:40 pm
FS REAR AXLE SHAFTS sold

Last post by geezert « Mon Mar 24, 2025 4:56 pm

by geezert » Mon Mar 24, 2025 4:56 pm

I have 4 new rear axle shafts for sale with gears installed
$ 75 each plus shipping
Sold

0 Replies

1563 Views

Last post by geezert
Mon Mar 24, 2025 4:56 pm
For sale: Russ Potter restored carbs

Last post by Mike Lebsack-Iowa « Mon Mar 24, 2025 3:37 pm
Replies: 4
by Mike Lebsack-Iowa » Sun Mar 23, 2025 8:33 am

First post

I have four carburetors that were restored by Russ Potter a few years ago and unused. Russ and I had swap meet spots next to each other at Chickasha. He warned me a few years ago that if I needed any brass carbs from him I had better get them since he planned to stop restoring them.
Here is the list. I will send photos upon request.
1- 1914 Holley...

Last post

Sold

4 Replies

1053 Views

Last post by Mike Lebsack-Iowa
Mon Mar 24, 2025 3:37 pm
FS: Mid-Teens Brass Carburetors

Last post by namdc3 « Mon Mar 24, 2025 8:23 am
Replies: 7
by Rodger Erickson » Sat Mar 15, 2025 9:50 pm

First post

FS: Different Mid-Teens Brass Carburetors. Clockwise from upper left:
Holley Model G, brass bowl and body, has dent in choke horn but looks decent otherwise, SOLD
Zenith 04, It's been monkeyed with a little bit but looks rebuildable the body isn't split, $25
Holley 2-screw 1913-1914 that's pretty beat up, the choke horn is out of round and...

Last post

Just an fyi for folks, I bought and paid for the Holley G. Check is in the USPS system somewhere.

7 Replies

1551 Views

Last post by namdc3
Mon Mar 24, 2025 8:23 am
Jack SOLD

Last post by Melba Nolan « Sun Mar 23, 2025 11:30 pm
Replies: 1
by Melba Nolan » Mon Nov 04, 2024 11:26 am

First post

For sale: Ford script jack in good working condition $45 plus postage

20241021_180515.jpg 20241021_180810.jpg 20241021_180526.jpg

Last post

thanks to you

1 Replies

1306 Views

Last post by Melba Nolan
Sun Mar 23, 2025 11:30 pm
running board tire pump

Last post by Melba Nolan « Sun Mar 23, 2025 11:27 pm
Replies: 6
by Melba Nolan » Sat Aug 31, 2024 7:06 pm

First post

For sale: Running board tire pump $75 plus postage
20240607_135218 - Copy (2).jpg
20240607_135251 - Copy.jpg

Last post

move to top

6 Replies

2473 Views

Last post by Melba Nolan
Sun Mar 23, 2025 11:27 pm
FS: BOSCH ZR4 Two Spark Dual Magneto

Last post by T4Tom « Sun Mar 23, 2025 10:32 pm
Replies: 5
by TPrez1923@aol.com » Sat Mar 22, 2025 1:04 pm

First post

For sale- Bosch ZR4 twin spark dual magneto to fire an 8 ug head. Good condition, still has some fire in it but should most likely be rebuilt. Asking $1,500.00 OBO plus shipping. Contact Mark with questions.

Last post

Thanks, Mark. It's a pleasure doing business with you.

Tom

5 Replies

1031 Views

Last post by T4Tom
Sun Mar 23, 2025 10:32 pm
Sold axle gears

Last post by Shrshot « Sun Mar 23, 2025 8:27 pm
Replies: 1
by Karl Von Neumann » Sun Mar 23, 2025 4:30 pm

First post

2 nice used axles gears freshly salvaged for a parts rear end $20ea plus the ride
Sold sold sold

Last post

Karl, PM sent

1 Replies

521 Views

Last post by Shrshot
Sun Mar 23, 2025 8:27 pm
Wanted to Buy Model T Ford Ignition Coils

Last post by 23ford « Sun Mar 23, 2025 6:58 pm
Replies: 1
by Ron Patterson » Thu Mar 20, 2025 10:31 am

First post

Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal works. I have done these deals many times over the years and know what will work so we both get what we need....

Last post

Ron call me about coils Warren Webb 9i8 693 5267

1 Replies

507 Views

Last post by 23ford
Sun Mar 23, 2025 6:58 pm
1914-15? right side lantern

Last post by MHSprecher « Sun Mar 23, 2025 1:28 pm
Replies: 1
by MHSprecher » Sun Mar 23, 2025 1:26 pm

First post

I have what I believe is a right side lantern for a 1914-15 Model T. No mfg information. Missing wick and tank. Good condition. $50 plus $15 shipping.

Last post

Some additional photos.

1 Replies

440 Views

Last post by MHSprecher
Sun Mar 23, 2025 1:28 pm
Black and brass Side lamp

Last post by billd « Sun Mar 23, 2025 1:22 pm
Replies: 5
by billd » Wed Feb 05, 2025 10:08 am

First post

Can anyone help me identify this black and Brass side lamp? I believe it to be a John Brown lamp. The body is all steel the rest is Brass. I believe it to be all original other than it has been repainted. I’m asking $200 or best offer, Plus shipping and I would prefer text message. My number is 419-217-8884.

Last post

The black and brass light is sold.

5 Replies

4072 Views

Last post by billd
Sun Mar 23, 2025 1:22 pm
FS: unusual stop/slow light

Last post by TPrez1923@aol.com « Sat Mar 22, 2025 2:59 pm
Replies: 2
by TPrez1923@aol.com » Sat Mar 22, 2025 2:27 pm

First post

For sale- Unusual stop/slow rear light. Not sure of it's purpose, two separate bulbs. Asking $75.00 OBO plus shipping. Contact Mark with questions.

Last post

Sold to Shannon pending payment

2 Replies

736 Views

Last post by TPrez1923@aol.com
Sat Mar 22, 2025 2:59 pm
FS T trailer spindles

Last post by Ken Buhler « Sat Mar 22, 2025 2:18 pm

by Ken Buhler » Sat Mar 22, 2025 2:18 pm

For about forty years I have had these very unique spindles. They were mounted to a beam with T front wheels on. They are, nicely machined to spec, T front left and right thread spindle shafts made for this specific purpose, and are cast into a robust aluminum bracket. I have no idea who made them but I am impressed with the quality of...

0 Replies

1588 Views

Last post by Ken Buhler
Sat Mar 22, 2025 2:18 pm
Sold! Wonderful Phares Auteroche Acetylene Brass Spotlight Pre-1912

Last post by Galen West « Sat Mar 22, 2025 12:35 pm
Replies: 2
by GGZ » Tue Mar 04, 2025 1:19 pm

First post

Sold! A great Phares Auteroche acetylene/carbide all brass spotlight that would likely be for a pre-1912'ish automobile. This light measures overall 11 long, the diameter of 7 and has a depth of 6 . This light has two acetylene/carbide gas tips with individual on/off valves attached. There is one dent on one side and some extra solder on the latch...

Last post

Is your light still for sale. Thank you. Galen West

2 Replies

815 Views

Last post by Galen West
Sat Mar 22, 2025 12:35 pm
FS KELSEY 23" SPLIT RIM LUGS FOR TT (SOLD)

Last post by Mark Chaffin « Sat Mar 22, 2025 6:35 am
Replies: 2
by Mark Chaffin » Fri Mar 21, 2025 5:07 pm

First post

Nine available as one lot. I believe these are for the Ton Truck (TT) 23 rear wheel split rim. Price for the lot is $50.00 with free domestic shipping included. Mark Chaffin (951) 805-0928

20250321_133947.jpg

20250321_134021.jpg

Last post

Going to Rick. Thank you

2 Replies

474 Views

Last post by Mark Chaffin
Sat Mar 22, 2025 6:35 am
crankshaft counter weights

Last post by Melba Nolan « Fri Mar 21, 2025 11:42 pm
Replies: 8
by Melba Nolan » Fri Dec 22, 2023 7:56 pm

First post

20220726_174038.jpg

For sale: crankshaft counter weights. $125 plus postage

Last post

move to top

8 Replies

2388 Views

Last post by Melba Nolan
Fri Mar 21, 2025 11:42 pm
differential spider

Last post by Melba Nolan « Fri Mar 21, 2025 11:37 pm
Replies: 3
by Melba Nolan » Fri Dec 22, 2023 8:18 pm

First post

For sale: differential spider $25 plus postage

melbanolan@aol.com or cell 314-575-7115 for pictures

Last post

move to top

3 Replies

1254 Views

Last post by Melba Nolan
Fri Mar 21, 2025 11:37 pm
lower steering column bracket

Last post by Melba Nolan « Fri Mar 21, 2025 11:36 pm
Replies: 1
by Melba Nolan » Fri Oct 11, 2024 10:15 pm

First post

For sale: steering column bracket $25 each plus postage

20220620_164942.jpg

Last post

move to top

1 Replies

1227 Views

Last post by Melba Nolan
Fri Mar 21, 2025 11:36 pm
crankcase support

Last post by Melba Nolan « Fri Mar 21, 2025 11:36 pm
Replies: 1
by Melba Nolan » Fri Oct 11, 2024 10:24 pm

First post

For sale: Front engine support for oil pan nose 3 dip pan 1917-24
$25 plus postage
20220513_095526.jpg 20220513_095535.jpg

Last post

move to top

1 Replies

1208 Views

Last post by Melba Nolan
Fri Mar 21, 2025 11:36 pm
Hand brake control (emergency brake)

Last post by Melba Nolan « Fri Mar 21, 2025 11:35 pm
Replies: 1
by Melba Nolan » Fri Oct 11, 2024 11:10 pm

First post

For sale: hand brake control lever $75 plus shipping

20220616_123543.jpg 20220616_123557.jpg

Last post

move to top

1 Replies

1304 Views

Last post by Melba Nolan
Fri Mar 21, 2025 11:35 pm
FS HYATT REAR AXLE ROLLER BEARINGS (SOLD)

Last post by Mark Chaffin « Fri Mar 21, 2025 11:18 pm
Replies: 8
by Mark Chaffin » Fri Mar 21, 2025 5:12 pm

First post

I Have 10 good used Hyatt rear axle roller bearings available for purchase. Very minimal wear. Cages are nice and tight. Price is $30.00 per bearing plus domestic shipping. Mark Chaffin (951) 805-0928

20250321_134130.jpg

Last post

All sold. Including Chris. Thanks MTFCA!

8 Replies

955 Views

Last post by Mark Chaffin
Fri Mar 21, 2025 11:18 pm
FS STEWART SPEEDOMETER DRIVE BRACKET (SOLD)

Last post by Mark Chaffin « Fri Mar 21, 2025 8:32 pm
Replies: 1
by Mark Chaffin » Fri Mar 21, 2025 5:09 pm

First post

STEWART speedometer drive mounting bracket (Part # P-32157 & P-32158). Price is $60.00 with free domestic shipping. Mark Chaffin (951) 805-0928

20250321_133402.jpg

20250321_133343.jpg

Last post

Sold to Steve. Thank you

1 Replies

491 Views

Last post by Mark Chaffin
Fri Mar 21, 2025 8:32 pm
FS-E & J Type 20 headlights

Last post by TPrez1923@aol.com « Fri Mar 21, 2025 5:56 pm
Replies: 6
by TPrez1923@aol.com » Tue Feb 04, 2025 4:18 pm

First post

Nice pair of E & J Type 20 headlights, originals, cleaned and polished. Great for a speedsteror other application. Asking $1850.00 OBO, plus shipping.
Contact Mark with questions.

Last post

Bump to top

6 Replies

4818 Views

Last post by TPrez1923@aol.com
Fri Mar 21, 2025 5:56 pm
1912 Holley H1 carburetor

Last post by Corey Walker « Fri Mar 21, 2025 5:50 pm

by Corey Walker » Fri Mar 21, 2025 5:50 pm

Viton tipped conversion, new float and venturi, throttle shaft bushing installed and test run. Crack free bowl, $650 postpaid to lower 48 or pick up tomorrow at Duncan swap meet. Email: wlkma9@gmail.com

0 Replies

1440 Views

Last post by Corey Walker
Fri Mar 21, 2025 5:50 pm
WTB Steel Headlamp Bezels for Round Lenses

Last post by TRDxB2 « Fri Mar 21, 2025 2:00 pm
Replies: 1
by Tadpole » Fri Mar 21, 2025 12:41 pm

First post

Looking for a pair of twist-on black era headlamp bezels made for the round cut lenses, with a claw at each corner instead of the flat-type claw for H lenses on the sides, top, and bottom. Send me an email through the forum. Thank you!

Last post

Looking for a pair of twist-on black era headlamp bezels made for the round cut lenses, with a claw at each corner instead of the flat-type claw for H lenses on the sides, top, and bottom. Send me an email through the forum. Thank you!

I have some (like the top rim), 2 Grant-Davis Ford Script and 1 E and J (some dents)- no splits . Back from...

1 Replies

480 Views

Last post by TRDxB2
Fri Mar 21, 2025 2:00 pm
Water outlet

Last post by TRDxB2 « Fri Mar 21, 2025 1:51 pm
Replies: 2
by Ralph F » Fri Mar 21, 2025 10:57 am

First post

Looking to buy a cylinder head outlet part# 3004. This fits from 09-16 brass fords.
Thanks
Fitz

Last post

Looking to buy a cylinder head outlet part# 3004. This fits from 09-16 brass fords.
Thanks
Fitz

If Karl doesn't have one send me an email I have some.

2 Replies

669 Views

Last post by TRDxB2
Fri Mar 21, 2025 1:51 pm

New Topic

10441 topics

Page 26 of 105
- Jump to page:
Previous
1
…
24
25
26
27
28
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum