Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 81581 Views
-
Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm
-
-
rear spring
by
Melba Nolan » Thu Nov 07, 2024 12:28 am
For sale: rear spring $150 plus shipping
20220707_135539.jpg
- 0 Replies
- 1011 Views
-
Last post by Melba Nolan
Thu Nov 07, 2024 12:28 am
-
-
FS accessory vacuum fuel pump
Replies: 2
by
Karl Von Neumann » Wed Jun 19, 2024 10:41 am
First post
Accessory vacuum fuel pump I know nothing about the inside I've never looked there is a float in there you can hear it move. Tank seem like it's solid $80 plus the ride
Last post
Move to top
Some on eBay in a range of prices
Chevrolet G.G Vacuum Tank Mid 1920's Coupe & Sedan
- 2 Replies
- 1287 Views
-
Last post by TRDxB2
Thu Nov 07, 2024 12:25 am
-
-
motor mount new price
Replies: 1
by
Melba Nolan » Tue Oct 22, 2024 3:48 pm
First post
For sale: front motor mount early $75 plus shipping
20230927_141458.jpg 20230927_141524.jpg
new price is $50 plus shipping
Last post
move to top
- 1 Replies
- 746 Views
-
Last post by Melba Nolan
Thu Nov 07, 2024 12:01 am
-
-
FS New Distributor SOLD
Replies: 3
by
25tfire » Tue Oct 29, 2024 2:10 pm
First post
New Texas T Model T Distributor with 6 volt Coil, Wires , Clamp and single rod. $475 plus shipping from 80543
Last post
Email is fine. clint@bitter.ly
- 3 Replies
- 1257 Views
-
Last post by Texasroadkill
Wed Nov 06, 2024 9:36 pm
-
-
Stewart 160 Speedometer F/S + One round gas tank strap F/S
Replies: 1
by
Jeff Perkins » Wed Nov 06, 2024 8:40 pm
First post
Stewart 160 plus parts shown to set up in your car. Just needs cable ends for the modern cable (included). $400 INCLUDES postage in the continental USA.
One round gas tank strap, as shown, $20 PLUS postage. or PM
Second post shows gas tank strap.
Last post
IMG_3950.jpeg
- 1 Replies
- 499 Views
-
Last post by Jeff Perkins
Wed Nov 06, 2024 8:43 pm
-
-
Sold Muncie FOR PARTS
Replies: 4
by
Karl Von Neumann » Mon Nov 04, 2024 12:06 pm
First post
I have a Muncie aux trans for a T hoping someone needs parts. It is not complete shifter and top work real well direct drive slider works and looks good case good input and output look good the cluster is shot if you can use anything let me know I'd prefer not to ship the whole thing but I could otherwise I'll strip out what you need scrap the...
Last post
Let me know what you would like for the input and output shafts and the sliding gear.
Sent you an email
- 4 Replies
- 1338 Views
-
Last post by Karl Von Neumann
Tue Nov 05, 2024 8:40 am
-
-
Hayes rims
Replies: 3
by
Melba Nolan » Mon Nov 04, 2024 12:34 am
First post
For sale: Hayes rims 30 x 3 $100 each plus shipping
20241027_102852.jpg
Last post
Because the valve stem hole is so close to the slotted lug, when the mounted tyre and tube are fitted to the wheel, the valve stem has to be dropped into the felloe hole, so the nearby lug has to be slotted to drop over the rim bolt. That slotted lug is a give-away that the rim is not a Ford rim, but it can be modified to fit.
Allan from down...
- 3 Replies
- 859 Views
-
Last post by Allan
Mon Nov 04, 2024 8:11 pm
-
-
WANTED: 1914 Windshield Frame
Replies: 1
by
BRENT in 10-uh-C » Sun Nov 03, 2024 10:06 am
First post
In search of complete & solid 1914 Windshield Frame. Might consider one without support arms, but prefer complete frame with hinges and arms.
TIA.
Last post
Got a beauty. Will send you a pic tomorrow.
- 1 Replies
- 580 Views
-
Last post by 1915ford
Sun Nov 03, 2024 10:40 pm
-
-
Horn Reeds $10 ea.
Replies: 3
by
Rodger Erickson » Sat Aug 24, 2024 1:04 pm
First post
FS: 2 Horn reeds, removed from imported Bombay Taxi horns. They seem to be of decent quality, and they should work in your Rubes or Nonpareil horns if you apply a little bit of Teflon tape. Asking $10 each, not including shipping.
Treed.jpg
Thanks for looking!
Last post
I still have 3 available thanks.
- 3 Replies
- 1092 Views
-
Last post by Rodger Erickson
Sun Nov 03, 2024 2:59 pm
-
-
- 6 Replies
- 1707 Views
-
Last post by BE_ZERO_BE
Sun Nov 03, 2024 1:59 pm
-
-
- 0 Replies
- 1030 Views
-
Last post by Shelbycsx
Sun Nov 03, 2024 12:34 pm
-
-
SOLD: Differentials and Spiders, best offer + shipping
Replies: 6
by
bmklawt » Thu Oct 31, 2024 11:02 am
First post
I have no clue what this is worth if anything make me an offer, don't be shy no offer is to low.
I can cram all of this in a Large flat rate box
Last post
Bruce:
had emailed you about these parts ... let me know if interested ...Gene French
- 6 Replies
- 1486 Views
-
Last post by Gene_French
Sun Nov 03, 2024 10:46 am
-
-
Hayes wire wheel hubcap
Replies: 3
by
Grntea » Sat Nov 02, 2024 2:53 pm
First post
Looking for a needle in a haystack! Below is a picture of a HAYES wire wheel hubcap in brass. They were also made in aluminum. Diameter is 2 1/4 inches. Does any body have an extra one? I have three and need a forth. Thanks MTFCA!
Last post
Bryan- PM sent.
- 3 Replies
- 963 Views
-
Last post by Dan McEachern
Sun Nov 03, 2024 12:42 am
-
-
FS: Early 1914 E&J "Black & Brass" Tail Lamp Refurbished $145
Replies: 4
by
Rodger Erickson » Fri Nov 01, 2024 1:54 pm
First post
For Sale: One Black & Brass E & J 1908 tail light, refurbished. I believe this is an early 1914, as the second tier is steel but the collar just below it is brass. It has a 1914 style fount. This light was refurbished from a side light with broken out lenses - the side panels and lenses are reproductions as is the door. The reflector is original,...
Last post
Rodger - Sounds like Bill could really use it now. I’m happy to let him purchase it instead. Would be neat to see it on his Runabout. ~Bryan
- 4 Replies
- 995 Views
-
Last post by bryan831daniel
Sat Nov 02, 2024 9:01 pm
-
-
Wanted to Buy; Model T Ford Ignition Coils
Replies: 6
by Ron Patterson » Sat Jul 06, 2024 9:57 am
First post
Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal...
Last post
I sent you an email.
- 6 Replies
- 2218 Views
-
Last post by Scott C.
Sat Nov 02, 2024 8:23 pm
-
-
FS Speedometer housing and cable
Replies: 2
by
YellowTRacer » Thu Oct 31, 2024 2:04 am
First post
54 inch Stewart speedometer cable and housing, appears to have originally been nickel plated as I polished a little of it. $100.00 plus postage.
Ed aka #4
Last post
Speedometer cable and housing has been sold.
Ed aka #4
- 2 Replies
- 971 Views
-
Last post by YellowTRacer
Sat Nov 02, 2024 1:13 pm
-
-
FS Original Torpedo running boards
Replies: 4
by
YellowTRacer » Thu Oct 31, 2024 1:48 am
First post
Two original Ford Torpedo running boards (Not Repro) removed from an older restoration Ford Torpedo roadster. They're in pretty good condition, with a couple of extra holes other than the ones for the carbide generator mounting. Some old rust pitting is visible under the repaint. Look at the pictures. $150.00 each plus postage.
Ed aka #4
Last post
The running boards are sold.
- 4 Replies
- 1111 Views
-
Last post by YellowTRacer
Sat Nov 02, 2024 1:10 pm
-
-
Found one/Wanted- 1914 runabout door latch
Replies: 6
by
Corey Walker » Thu Oct 31, 2024 12:10 pm
First post
I’m looking for a door latch for my runabout. I’ve determined that there were 2 different ones, don’t know if it was because of 2 body makers or what but the handle is in a slightly different spot. The one I need has the handle closer to the rear.
It is easily identifiable by where the handle goes into the latch assembly. The one I have is the...
Last post
Thanks Art, yes that is the one with no daylight showing around the handle. The other style that I have now is 2 1/4” at the spot where the other is 1 1/2”.
- 6 Replies
- 1142 Views
-
Last post by Corey Walker
Sat Nov 02, 2024 12:05 pm
-
-
WTB 2589-B FOUND
Replies: 2
by
Craig Leach » Fri Nov 01, 2024 10:49 pm
First post
WTB I think the part I'm looking for is 2589-B the early closed spool pinion bearing race. Not the cupped one. Anyone have one they don't need
I have all the parts except that one to put together a second spool. Thanks.
Craig.
Last post
Thanks Karl,
Found one in Az.
Craig.
- 2 Replies
- 1010 Views
-
Last post by Craig Leach
Sat Nov 02, 2024 3:15 am
-
-
13/14 Canadian rear fenders
Replies: 2
by
Dollisdad » Fri Oct 25, 2024 12:14 pm
First post
On marketplace. North Branch, Mi. I have no connection. IMG_9020.jpeg
Last post
Would love to see the Canadian details for these fenders - pictures would be very much appreciated.
- 2 Replies
- 829 Views
-
Last post by jmc
Fri Nov 01, 2024 8:23 pm
-
-
FS 26-27 COIL BOX LID
by
Scott C. » Fri Nov 01, 2024 6:06 pm
I have a reproduction 26-27 coil box lid that I do not need. How about $10 plus shipping?
26-27 cover 2.jpg
26-27 cover 1.jpg
- 0 Replies
- 1009 Views
-
Last post by Scott C.
Fri Nov 01, 2024 6:06 pm
-
-
SOLD: 9" Brass Taillamp from 1908-1912'ish
Replies: 4
by
GGZ » Fri Sep 20, 2024 3:34 pm
First post
SOLD AND SHIPPED TO BRYAN! Thanks!!!
Here is a nice 9 all brass taillamp that dates from about 1908-1912'ish. There are some cracks in the brass. It is complete with the thumb nut, burner, good lenses and a brass bracket. Take a look at the photos. The price is 195.00 including shipping in the USA. Call me at 734- 730- 4274 or email directly at...
Last post
I’m interested. E-mail sent. ~Bryan
- 4 Replies
- 1586 Views
-
Last post by bryan831daniel
Fri Nov 01, 2024 4:41 pm
-
-
oval gas brackets
Replies: 2
by
Melba Nolan » Wed Oct 30, 2024 9:33 am
First post
For sale: oval gas brackets $25 plus shipping
20240619_091429.jpg 20240619_091438.jpg
Last post
can't open it. send to melbanolan@aol.com
- 2 Replies
- 685 Views
-
Last post by Melba Nolan
Fri Nov 01, 2024 12:18 pm
-
-
FS 50 year old Calistoga Classics Dirt Track Posters
Replies: 5
by
YellowTRacer » Tue Oct 29, 2024 3:30 am
First post
Still cleaning house, kinda, and ran across a couple of 50 year old advertising posters for the old Calistoga Classics dirt track races that were held in conjunction with the Antique and Collectors Revival, a gigantic (for the time period) antique sale, held at the Napa County Fairgrounds in Calistoga, California. Those races were truly exciting,...
Last post
Doc Pruden was sharp. He bought every speed part he saw back when everyone wanted stock cars only.
Vic Sala was quite the character as well.
- 5 Replies
- 1562 Views
-
Last post by big2bird
Fri Nov 01, 2024 10:45 am
-
-
1924 Roadster fuel tank for sale
Replies: 1
by
Whitehair » Wed Oct 30, 2024 6:08 pm
First post
I have a dirty oval Ford Model T fuel tank for sale. It does not leak. $200.00 or best offer. Buyer pays shipping.
Last post
bump back to the top
- 1 Replies
- 1864 Views
-
Last post by Whitehair
Fri Nov 01, 2024 4:17 am
-
-
Early 11 valve covers fs. Sold
Replies: 3
by
CTLeonard » Thu Oct 31, 2024 10:43 am
First post
Saw these were posted the other day and found I had a pair on the shelf. They measure the .095. one is very nice, the mate, not so good. She would take some bondo on the corner and hid on the back side. I will take 75.00 plus shipping for both. ctleonard64@gmail.com 1730385574400524464187865579308.jpg 17303856017764050132182169155307.jpg...
Last post
Mailed to you ray. Email sent
- 3 Replies
- 645 Views
-
Last post by CTLeonard
Thu Oct 31, 2024 4:15 pm
-
-
Engine splash pan fs. Sold
by
CTLeonard » Thu Oct 31, 2024 2:13 pm
Fits 1919-27. Not a perfect specimen, but very usable. Just the one pictured. 30.00 plus shipping. ctleonard64@gmail.com 17303982619396929482347332021900.jpg 17303983066691469996956146955168.jpg 1730398329238649868437097560018.jpg
- 0 Replies
- 1128 Views
-
Last post by CTLeonard
Thu Oct 31, 2024 2:13 pm
-
-
Headlight forks
Replies: 4
by
Dollisdad » Mon Jun 17, 2024 3:09 pm
First post
2 - 1911-14 right side and 1 - 1909-10 left side fork. $45 each + freight or p/u. IMG_3744.jpeg
Last post
I still have it.
- 4 Replies
- 1603 Views
-
Last post by Dollisdad
Thu Oct 31, 2024 1:45 pm
-
-
FS 1915/16 Aluminum Transmission cover
Replies: 2
by
YellowTRacer » Thu Oct 31, 2024 2:12 am
First post
Bare aluminum transmission cover, no pedals etc. Late style with reinforcing ribs. Good clean condition. $40.00 plus shipping. Pictures on request.
Ed aka #4
Last post
Yeah, it's amazing how much the hobby has changed. I still love the hand cranking but there's fewer and fewer of us.
Ed aka #4
- 2 Replies
- 893 Views
-
Last post by YellowTRacer
Thu Oct 31, 2024 1:29 pm
-
-
- 1 Replies
- 568 Views
-
Last post by Karl Von Neumann
Thu Oct 31, 2024 11:21 am
-
-
WTB 1911 Torpedo Tool Box 28x11x11
Replies: 3
by
MTW » Fri Oct 25, 2024 12:56 pm
First post
Hello All,
Looking for a Torpedo Tool Box for a 1911 Open Roadster. I am unsure of the exact dimensions I got these from a prior posting. Please post here or PM/email me pictures and details.
Thanks,
Lynn
Last post
I will check, I have several tool boxes, one might be the right size. I have an Open Runabout that does have a toolbox on it that can compare to.
- 3 Replies
- 883 Views
-
Last post by Mike Lebsack-Iowa
Thu Oct 31, 2024 10:56 am
-
-
ModelT running board blocks fs
by
CTLeonard » Thu Oct 31, 2024 10:30 am
I have an abundance of red oak to burn up, so I'm offering red oak running board blocks at half price compared to vendors. 1909-16 require 8 blocks for 15.00 plus shipping. 1917-25 are 4 blocks at 7.50 plus shipping. 1926-7 are 4 blocks at 7.50 plus shipping.. 1909-25 measure 7 3/8 x 1 1/2 x 3/4. 1926-7 are 9 1/8 x 1 1/2 x 3/4. I don't drill the...
- 0 Replies
- 908 Views
-
Last post by CTLeonard
Thu Oct 31, 2024 10:30 am
-
-
FS Fatman Steering Wheel (SOLD)
Replies: 5
by
ThreePedalTapDancer » Wed Oct 30, 2024 3:50 pm
First post
Original accessory Model T Ford heavy duty cast steel fatman flip up folding steering wheel center. Ready for a 17 inch wood rim. Works by pulling lever down, which allows steering wheel to flip up out of the way. Great condition, nice paint with some minor pitting, solid with no damage or repairs. Nice looking wheel. 225 includes shipping lower...
Last post
Judging by the depth of that wheel, wasn't someone looking for a wheel that would make it closer to himself?
Craig.
- 5 Replies
- 1567 Views
-
Last post by Craig Leach
Wed Oct 30, 2024 10:59 pm
-
-
Spoken For: Large Nickel-Era Electric Headlight Bucket (Rough)
Replies: 5
by
Rodger Erickson » Sat Jul 13, 2024 9:58 am
First post
I have one large (12 OD) brass fork-mounted electric headlight bucket, probably ca. 1913-1915. Fork-mounted, with the fork mounts being 10 1/2 center-to-center. Missing the reflector and one mounting bracket as well as some hardware. The bucket is dented in a bunch of places but the ring is quite nice. Probably from a fire truck or fancy bus or...
Last post
That may be for a Cadillac.
- 5 Replies
- 1625 Views
-
Last post by TXGOAT2
Wed Oct 30, 2024 10:21 pm
-
-
- 5 Replies
- 1248 Views
-
Last post by Marshall V. Daut
Wed Oct 30, 2024 9:58 pm
-
-
spindle set SOLD
Replies: 3
by
Melba Nolan » Tue Jun 18, 2024 11:01 pm
First post
for sale: spindle set $35 plus postage
20240614_101707 - Copy.jpg
Last post
Did you ever sell this spindle set? I am looking for some!
- 3 Replies
- 1708 Views
-
Last post by Grntea
Wed Oct 30, 2024 8:27 pm
-
-
FS FRONT AXLE SPINDLE SET (SOLD)
Replies: 1
by
Mark Chaffin » Mon Aug 19, 2024 6:19 pm
First post
One very nice pair of 26/27 front spindles. Threads and races are in very good condition. Price is $75 plus domestic shipping. SOLD Mark Chaffin (951) 805-0928
20240819_142052.jpg
20240819_141932.jpg
Last post
Do you have any more sets like these front left and right spindle bodies?
- 1 Replies
- 1343 Views
-
Last post by Grntea
Wed Oct 30, 2024 8:21 pm
-
-
For Sale: Early 1911 Valve Cover Doors
Replies: 11
by
Ed Fuller » Fri Jun 30, 2023 5:09 pm
First post
Here is a set of early valve cover doors used from late 1910 through June 1911. They measure.093” thick. One has some pitting towards the corner.
$150 plus shipping in the U.S.
8E1A2643-D71D-4ACE-9047-459F07A9CA87.jpeg
AF54B3D0-475D-4F42-BE69-1E54D71FE40F.jpeg
D8FFC04A-C597-474A-9245-4CDAA17DC5C2.jpeg
Last post
My pleasure Jerry!
W2
- 11 Replies
- 2703 Views
-
Last post by Wayne Sheldon
Wed Oct 30, 2024 7:16 pm
-
-
- 6 Replies
- 1294 Views
-
Last post by Allan
Wed Oct 30, 2024 6:07 pm
-
-
- 0 Replies
- 959 Views
-
Last post by BarnesvilleT
Wed Oct 30, 2024 2:37 pm
-
-
1911 model t valve covers, wtb
Replies: 3
by
Nikko012 » Fri Oct 25, 2024 6:48 pm
First post
Looking for a early 1911 valve cover, should be .095 thickness. It is highly inbossed and heavy
Last post
Email me at ctleonard64@gmail.com I have a pair, one really good, the other you'll have to doctor a bit and stick in the upper back
- 3 Replies
- 921 Views
-
Last post by CTLeonard
Wed Oct 30, 2024 2:13 pm
-
-
WTB Gets Spark Plugs
Replies: 3
by
Tadpole » Mon Jun 03, 2024 12:22 pm
First post
Looking to buy Gets Manufacturing long body spark plugs for old engines, I can be reached by the email attached.
Thank you much!
Last post
One more bump, looking for this plug. I am not picky, any condition will do.
- 3 Replies
- 1432 Views
-
Last post by Tadpole
Wed Oct 30, 2024 10:57 am
-
-
WTB 30x3.5 demountable clincher rims
Replies: 2
by
Grntea » Tue Oct 29, 2024 11:05 pm
First post
Looking to buy 5 each 30x3.5 demountable clincher rims in usable condition. Thanks MTFCA !
Last post
I've got some 30ea plus the ride
- 2 Replies
- 695 Views
-
Last post by Karl Von Neumann
Wed Oct 30, 2024 10:54 am
-
-
FS 11 tooth pinions ( non script sold)
Replies: 5
by
Craig Leach » Fri Oct 18, 2024 11:50 am
First post
FS Pinions 11 tooth One Ford script with some small pits (copper colored) & one non script $ 50 each + the ride
Craig. IMG_3294.jpg IMG_3295.jpg IMG_3297.jpg
Last post
Non script pinion sold Thanks Ken.
Craig.
- 5 Replies
- 1514 Views
-
Last post by Craig Leach
Wed Oct 30, 2024 10:06 am
-
-
FS Band tool
Replies: 1
by
Craig Leach » Fri Oct 18, 2024 12:13 pm
First post
T-3413-BT band tool New in the bag $ 12 + the ride.
IMG_3303.jpg Craig
Last post
Still for sale & in the vender bag.
- 1 Replies
- 1011 Views
-
Last post by Craig Leach
Tue Oct 29, 2024 10:47 pm
-
-
FS Running board blocks
Replies: 1
by
Craig Leach » Sat Oct 19, 2024 1:22 pm
First post
One set of 4822-A running board blocks (one has a odd hole in it ?) $10 + the ride.
Craig. IMG_3309.jpg
Last post
To the top please
- 1 Replies
- 901 Views
-
Last post by Craig Leach
Tue Oct 29, 2024 10:41 pm
-
-
FS Head Saver
Replies: 1
by
Craig Leach » Sat Oct 19, 2024 1:34 pm
First post
A-6010-AHS or 3001-AHS Head Saver Anode $ 7.50 + the ride.
IMG_3310.jpg Craig.
Last post
To the top please.
- 1 Replies
- 1091 Views
-
Last post by Craig Leach
Tue Oct 29, 2024 10:41 pm
-
-
FS DS 23-25 WS Stanchion
Replies: 1
by
Craig Leach » Sat Oct 19, 2024 9:53 pm
First post
1923-1925 D/S Windshield stanchion, show's no signs of bolt markings but can not say is NOS. $80 + shipping. IMG_3314.jpg IMG_3315.jpg can send other pics if needed
Craig.
Last post
New price $60
- 1 Replies
- 811 Views
-
Last post by Craig Leach
Tue Oct 29, 2024 10:40 pm
-
-
FS rear window trim
Replies: 1
by
Craig Leach » Sat Oct 19, 2024 11:56 pm
First post
I have no idea for sure if this is 1927 rear closed car window trim. It is solid but rusty & looks to have had the screws over tightened. Will take
offers + shipping.
Craig IMG_3318.jpg
Last post
To the top please.
- 1 Replies
- 913 Views
-
Last post by Craig Leach
Tue Oct 29, 2024 10:38 pm
-
-
- 5 Replies
- 1179 Views
-
Last post by GatorsModelT
Tue Oct 29, 2024 9:36 pm
-
-
30x3 front rims
Replies: 4
by
Nikko012 » Sat Oct 26, 2024 10:42 pm
First post
Looking for two 30 x3 rims. New manufacture if possible. Wtb
Last post
I have nice used ones 30 each plus the ride
- 4 Replies
- 1343 Views
-
Last post by Karl Von Neumann
Tue Oct 29, 2024 5:18 pm
-
-
Bolts
Replies: 4
by
Original Smith » Sat Oct 26, 2024 11:45 pm
First post
Is anyone making the correct 1/4-28 engine dust pan bolts. These were used on the brass radiator cars.
Last post
From the 1912 catalog:
1/4 x 9/16 quantity: 7
engine pan bolts 1912 catalog close.png
Here are some that I believe Richard Eagle made:
engine pans bolts and nuts.jpg
Here is from the 1916 catalog:
3088B 1/4 x 3-1/4 quantity: 2
3088C 1/4 x 3-5/8 quantity: 2
1916 engine pan bolts.png
: ^ )
- 4 Replies
- 1515 Views
-
Last post by KWTownsend
Tue Oct 29, 2024 3:23 pm
-
-
- 0 Replies
- 992 Views
-
Last post by bmklawt
Tue Oct 29, 2024 11:12 am
-
-
Someone was searching for this recently !
Replies: 3
by
RajoRacer » Fri Oct 25, 2024 6:15 pm
First post
Someone posted a wanted ad recently but danged if I could find it again - repro. early brass fuel shut-off - drop me a note through the Forum - found one in my stock.
Last post
Valve has found a new home to the first fella needing one !
- 3 Replies
- 1502 Views
-
Last post by RajoRacer
Tue Oct 29, 2024 9:26 am
-
-
FS Brass sediment bowl
Replies: 14
by
YellowTRacer » Thu Oct 17, 2024 1:58 am
First post
Early brass Ford script sediment bowl. The shut off/on handle works fine. $90.00
Ed aka #4
Last post
The sediment bowl is sold!
Ed aka #4
- 14 Replies
- 3107 Views
-
Last post by YellowTRacer
Tue Oct 29, 2024 1:22 am
-
-
WTB Wrist Pins
by
Jonathan Hoffman » Mon Oct 28, 2024 7:02 pm
Hello,
I'm looking for a set of wrist pins (two if possible) for a speedster engine I'm building. They need to be machined without the groove in the center for the pinch bolt as I'm going to be using a full floating pin setup. They also need to be the stock .740 O.D.
Thanks I'm advance
- 0 Replies
- 976 Views
-
Last post by Jonathan Hoffman
Mon Oct 28, 2024 7:02 pm
-
-
windshield hinges SOLD
Replies: 1
by
Melba Nolan » Mon Oct 28, 2024 8:24 am
First post
For sale: set of windshield hinges $50 plus postage
20241009_182508.jpg
Last post
Email sent
- 1 Replies
- 811 Views
-
Last post by Kevin Pharis
Mon Oct 28, 2024 2:41 pm
-
-
FS tudor sedan front seats
Replies: 1
by
Karl Von Neumann » Mon Oct 28, 2024 11:38 am
First post
I've got 2 tudor sedan front seat frames no springs one is just the back frame and hinges with dammage 50$ plus the ride and the other is the back with hinges floor mounts and under seat braces 80$ plus the ride . Both are stamped ford 2 different #s T9757b and T5617
Last post
More pics....
- 1 Replies
- 525 Views
-
Last post by Karl Von Neumann
Mon Oct 28, 2024 11:38 am
-
-
Wanted: wood firewall cap for a 1919
Replies: 8
by
Fozz71 » Fri Oct 25, 2024 3:08 pm
First post
Anyone have any success fabbing a cap (or suggesting how) for the wooden firewall? I have a 1919 that has lost its cap, I would like to protect the wooden edge from delaminating.
Thanks,
James
Last post
Karl, I sent a response.
- 8 Replies
- 1493 Views
-
Last post by Fozz71
Mon Oct 28, 2024 10:47 am
-
-
FS: Unusual Aftermarket Carburetor HD Schroeder LA $50
Replies: 2
by
Rodger Erickson » Sat May 11, 2024 10:39 am
First post
FS: An aftermarket carburetor I've never heard of, mfd by H. D. Schroeder Die Casting Co., Los Angeles. Has kind of an oddly complicated main jet / venturi setup, probably optimized for fuel efficiency rather than performance. It looks like it cost alot more to make than the Holley / Kingston carburetors of that era. If you collect odd accessory...
Last post
Rodger, check your e-mail,
Thanks,
Kevin
- 2 Replies
- 1026 Views
-
Last post by kevinf
Mon Oct 28, 2024 10:00 am
-
-
- 14 Replies
- 2741 Views
-
Last post by Tom Stephens
Mon Oct 28, 2024 1:29 am
-
-
rear radius rods SOLD
Replies: 2
by
Melba Nolan » Sun Oct 27, 2024 3:57 pm
First post
For sale: set of rear radius rods in good condition $50 plus shipping
20241027_140058.jpg 20241027_140036.jpg 20241027_140029.jpg
Last post
Those are for a 1926-7 rear end with large brake drums. You might check with the buyer that these are what is required before shipping.
Allan from down under
- 2 Replies
- 705 Views
-
Last post by Allan
Sun Oct 27, 2024 11:55 pm
-
-
Bosch Distributor
Replies: 7
by
Melba Nolan » Fri Oct 11, 2024 10:28 pm
First post
For sale: Bosch distributor $200 plus shipping
20220607_092206.jpg 20220607_092225.jpg
Last post
ok thanks any way
- 7 Replies
- 2177 Views
-
Last post by Melba Nolan
Sun Oct 27, 2024 3:21 pm
-
-
FS Late 1912-1913 Nonpareil Brass Horn (SOLD)
Replies: 1
by
ThreePedalTapDancer » Fri Sep 27, 2024 12:19 pm
First post
Original late 1912-1913, round mounting bracket, Nonpareil brass horn. Original as found condition. Nice and solid, a few small dents, perfect to restore or to use as is on your original car. 110 includes shipping.
IMG_1918.jpeg
Last post
Still available
IMG_3995.jpeg
- 1 Replies
- 1241 Views
-
Last post by ThreePedalTapDancer
Sun Oct 27, 2024 9:39 am
-
-
coil box Reduced price
Replies: 6
by
Melba Nolan » Fri Dec 22, 2023 5:20 pm
First post
20220607_083846.jpg 20220607_083919.jpg 20220607_083926.jpg 20220607_083954.jpg
For sale: New York Coil Co. box with coils $750 plus postage
In very good condition
Last post
move to top
- 6 Replies
- 2139 Views
-
Last post by Melba Nolan
Sat Oct 26, 2024 10:38 pm
-
-
Anco Timer
Replies: 3
by
Melba Nolan » Fri Jun 07, 2024 5:47 pm
First post
For sale: New Anco timer with rotor, pin and retainer. cover will need cleaned from light rust from sitting. $75 plus shipping
20240201_132938.jpg
surface rust
email melbanolan@aol.com or text 314-575-7115
Last post
move to top
- 3 Replies
- 1512 Views
-
Last post by Melba Nolan
Sat Oct 26, 2024 10:32 pm
-
-
Head
Replies: 2
by
Melba Nolan » Sat Sep 07, 2024 10:43 am
First post
For sale: Ford script head with made in USA $100 plus shipping 20240507_155020.jpg
Last post
move to top
- 2 Replies
- 1434 Views
-
Last post by Melba Nolan
Sat Oct 26, 2024 10:31 pm
-
-
For Sale: 1950S NOS STEWART WARNER HAND HELD TACHOMETER
Replies: 1
by
GGZ » Sat Oct 26, 2024 8:10 pm
First post
This Stewart Warner Hand Held Tachometer is probably from the 1950s. It is New Old Stock and includes two rubber tips and the original instructions in the original envelope. It measures about 2 3/4 inches in diameter. A great piece to measuring revolutions per minute (R.P.M.). A collectible that is a usable tool.
The price is 65.00 including...
Last post
Hand Operated Tachometer? ;)
- 1 Replies
- 700 Views
-
Last post by TRDxB2
Sat Oct 26, 2024 8:35 pm
-
-
- 0 Replies
- 1110 Views
-
Last post by Layden Butler
Sat Oct 26, 2024 7:50 pm
-
-
- 0 Replies
- 1255 Views
-
Last post by Layden Butler
Sat Oct 26, 2024 7:29 pm
-
-
- 0 Replies
- 1029 Views
-
Last post by Layden Butler
Sat Oct 26, 2024 7:16 pm
-
-
FS Folk art weather vane
Replies: 2
by
YellowTRacer » Fri Oct 25, 2024 7:40 pm
First post
After 50+ years of storage, a little more house keeping, I finally decided to sell the old metal weather vane. Absolute great piece of original folk art, with the sport roadster scaring the chicken off the road. Overall size 39 long X 16 tall. Completely original condition. $500.00
Ed aka #4
Last post
Sorry David the weather vane has been sold.
Ed aka #4
- 2 Replies
- 1053 Views
-
Last post by YellowTRacer
Sat Oct 26, 2024 5:26 pm
-
-
- 4 Replies
- 1160 Views
-
Last post by YellowTRacer
Sat Oct 26, 2024 5:19 pm
-
-
WANTED Racing style steering wheel
Replies: 12
by
geneabb » Tue Sep 24, 2024 5:51 pm
First post
I'm looking for a steering wheel for my 1926 speedster project as used on racing cars at the time. 4 flat spokes with a hub to fit the Model T steering shaft. Wooden rim preferred. I can purchase and pick up at Hershey.
I know it's a long shot but I thought I would try and see if somethings available.
Thanks,
Gene
Union Bridge, Md.
Last post
I rambled across this one. The seller had two different ones posted.
I have a similar one. Just a caution when looking at any wheel: while the hole diameter may be the proper size; the thickness of the hub may be too thick for bolting onto the steering pinion shaft. Not sure if I did that to the one I have if it would still be too thick
- 12 Replies
- 3003 Views
-
Last post by TRDxB2
Sat Oct 26, 2024 1:13 pm
-
-
FS St. Louis Magneto Tester (SOLD)
Replies: 5
by
ThreePedalTapDancer » Wed Oct 16, 2024 5:41 pm
First post
New, never used, still in the box, reproduction St. Louis Magneto Tester. Beautiful exact copy of a hard to find tool, exceptional woodwork, incredible reproduction. Includes directions/instructions. A must have tool for display or actual use. 375 includes shipping.
IMG_2069.jpeg
Last post
Everything John Regan ever made was top drawer!
I really miss his work, items, and help!
- 5 Replies
- 1956 Views
-
Last post by J1MGOLDEN
Fri Oct 25, 2024 7:15 pm
-
-
FS Front KW Road Smoother shock absorbers
by
YellowTRacer » Fri Oct 25, 2024 6:54 pm
KW Road Smoother shock absorbers. The pictures show them on an axle. The Axle was bent so I removed them from the axle and will throw the axle away. $150.00. Plus shipping.
Ed aka #4
- 0 Replies
- 1199 Views
-
Last post by YellowTRacer
Fri Oct 25, 2024 6:54 pm
-
-
FS D B early front axle
by
YellowTRacer » Fri Oct 25, 2024 6:20 pm
Dodge Brothers mfg. early Model T front axle. Heavily primed smooth finish front axle. Really nice. $150.00 Plus shipping.
Ed aka #4
- 0 Replies
- 1178 Views
-
Last post by YellowTRacer
Fri Oct 25, 2024 6:20 pm
-
-
WTB Block
Replies: 6
by
Bill Everett » Fri Oct 25, 2024 10:15 am
First post
I'd like to buy a block that has an October, 2013, casting date.
Text a picture of it with your contact data and location to me at 901-496-8795.
Thx.
Last post
I have a 13 block without a casting date
- 6 Replies
- 1244 Views
-
Last post by Tbird
Fri Oct 25, 2024 6:16 pm
-
-
FS Security Auto Theft device
Replies: 1
by
YellowTRacer » Fri Oct 25, 2024 5:15 pm
First post
Security Auto Theft Signal System wheel lock anti theft device complete with both keys. Ready to use! $150.00 plus shipping
Ed aka #4
Last post
Is there a number or letter code on the inside ?
- 1 Replies
- 745 Views
-
Last post by RajoRacer
Fri Oct 25, 2024 5:47 pm
-
-
SOLD: Early 1915 Rubes Brass Bulb Horn with Elbow, Tube, Bulb, etc
Replies: 1
by
GGZ » Fri Oct 25, 2024 5:20 pm
First post
SOLD to New Mexico!!! Here is an original, early 1915 Rubes horn. This horn is really, really, nice. It appears to have been restored. No bumps, bruises, cracks etc. The front screen and the screen frame are in excellent condition and are held in place with the thumb nuts. This includes the rare brass elbow which connects the tube to the horn....
Last post
A couple of more pictures.....
- 1 Replies
- 553 Views
-
Last post by GGZ
Fri Oct 25, 2024 5:23 pm
-
-
Wanted: pre-26 frame
Replies: 2
by
DaveW » Mon Oct 21, 2024 9:07 pm
First post
Preferably in the Portland Or
Last post
What year frame do you want? I have frames for all years,and I am in Portland usually once a week. Call me at 503 728 3476 Ted
- 2 Replies
- 861 Views
-
Last post by T Cruiser
Fri Oct 25, 2024 2:40 pm
-
-
- 6 Replies
- 2453 Views
-
Last post by GGZ
Fri Oct 25, 2024 10:24 am
-
-
FS APCO Pan Repair Arms
by
AZTerry » Fri Oct 25, 2024 1:25 am
FS: One pair of APCO pan repair arms. Glass beaded and soaked in Evapo-Rust. $50.00 for pair plus shipping
Please email me through the forum
Thank you,
Terry
- 0 Replies
- 1006 Views
-
Last post by AZTerry
Fri Oct 25, 2024 1:25 am
-
-
Hudco Ford Slip Out Pedal Transmission Cover
Replies: 8
by
Tparts » Wed Jun 19, 2024 8:37 pm
First post
Sale Pending to Scott M. Interesting accessory Hudco Transmission Cover. Possibly New Old Stock because of never having pedals, pedal cams, and clutch shaft installed. This cover allows you to remove all the pedals to change the bands easily. It has been glass beaded, NOT sandblasted. $250 plus shipping or delivered free to Hershey this fall. Call...
Last post
I also have one waiting to install next time I pull the engine from the '19 Centerdoor - ever had to replaced bands in a Centerdoor ????
Yes, just did my 21 Centerdoor. Had to pull the hogsheads and it was a complete nightmare. :shock:
- 8 Replies
- 2555 Views
-
Last post by Robert Kiefaber
Thu Oct 24, 2024 10:40 pm
-
-
Wanted - Oil Pan for 1925 Roadster
Replies: 19
by
wmscottsutherland » Mon Oct 21, 2024 1:36 pm
First post
All,
I'm looking for an oil pan in good useable shape. I'm in Cheyenne so from Denver north would be a reasonable driving distance.
Please let me know.
Thanks
Scott
Last post
Good news. I got a better phone number for Dave Huson. Spoke with him this evening. He has what I need.
- 19 Replies
- 2709 Views
-
Last post by wmscottsutherland
Thu Oct 24, 2024 8:08 pm
-
-
WANTED - 09 Brass Carbide Generator
Replies: 3
by
Lcjudge » Wed Oct 23, 2024 8:33 am
First post
I’m looking for an early brass carbide generator. Excellent quality repo is ok. This is for an 09 T. I have numerous T items to trade or of course, the universal trading item, $$$.
Last post
I sent you an email through the forum.
- 3 Replies
- 979 Views
-
Last post by JTT3
Thu Oct 24, 2024 7:43 pm
-
-
WTB 1917 or 1918 high head
Replies: 5
by
Gnico » Thu Oct 24, 2024 3:44 pm
First post
I am looking for a good 17 or 18 high head.
Last post
He is looking for the one with the thumb nail on the back.
- 5 Replies
- 808 Views
-
Last post by Joe Bell
Thu Oct 24, 2024 5:09 pm
-
-
WTB oil filler cap
Replies: 2
by
Sammy T » Wed Oct 23, 2024 6:29 pm
First post
Need an oil filler cap. Have no idea what happened to mine. Jim
Last post
Better give me 2. I can pay pal. Send email with your PP info and total. Thanks.
Jim
- 2 Replies
- 899 Views
-
Last post by Sammy T
Thu Oct 24, 2024 5:08 pm
-
-
WANTED: Three Rocker Arms For Model 30 Rajo Head
Replies: 9
by
WaltM » Tue Apr 23, 2024 3:19 pm
First post
WTB: Looking for three Rajo rocker arms for a commercial Rajo head (model 30). Rockers fit a 5/8-inch rocker shaft. Need three to finish head. Call, Email or text (248) 894-75fiveone. Any help greatly appreciated. Thanks, Walt
Last post
Still looking. Thanks, Walt
- 9 Replies
- 2023 Views
-
Last post by WaltM
Thu Oct 24, 2024 9:57 am
-
-
- 0 Replies
- 996 Views
-
Last post by WaltM
Thu Oct 24, 2024 9:51 am
-
-
- 9 Replies
- 2591 Views
-
Last post by Dan McEachern
Thu Oct 24, 2024 1:39 am
-
-
2008 Centennial Blanket. SOLD
Replies: 3
by
aDave » Tue Oct 22, 2024 10:07 am
First post
I have an extra one...new -= never taken out of the wrapper. 49 X 57 . $30.00 plus postage
Last post
Rats, lost mine in the fire. Best John
- 3 Replies
- 970 Views
-
Last post by JTT3
Thu Oct 24, 2024 12:08 am
-
-
starter cover
Replies: 2
by
Melba Nolan » Tue Oct 22, 2024 3:30 pm
First post
For sale: starter drive cover choice $5 each plus shipping
20220616_124558.jpg
Last post
ok will do
still one left
- 2 Replies
- 771 Views
-
Last post by Melba Nolan
Wed Oct 23, 2024 12:34 pm
-
-
- 0 Replies
- 1029 Views
-
Last post by Karl Von Neumann
Wed Oct 23, 2024 12:27 pm
-
-
FOUR WHEELS AND NO BRAKES
by
Melba Nolan » Tue Oct 22, 2024 8:42 pm
For sale: A 270 page book with pictures. First printed in 1930 by the Auto Pioneers in St. Louis.
According to historians this was the only major US city to produce a book of their own recollections. It includes history and events on the first cars in and around St. Louis. Races, inventions, breakdowns, production and challenges.
The book is $20...
- 0 Replies
- 1178 Views
-
Last post by Melba Nolan
Tue Oct 22, 2024 8:42 pm
-
-
Jewel Ammeter for HCCT on FB Marketplace $80
Replies: 3
by
Jerry VanOoteghem » Tue Oct 22, 2024 6:20 pm
First post
Looks like it could be useful for a HCCT restoration...
I have no connection with this. Just spotted it and thought someone here might want it.
Last post
The red blob is a damaged pointer.
Looks like it needs a fair amount of work to restore.
I'd give $30 for it if I lived closer.
Right. And, it's not parked at 0 . That may however be within the range of the zero adjustment to correct. Or, maybe not...
- 3 Replies
- 928 Views
-
Last post by Jerry VanOoteghem
Tue Oct 22, 2024 7:47 pm
-
-
spider
by
Melba Nolan » Tue Oct 22, 2024 4:12 pm
For sale: differential spider with FORD script $25 plus postage
20220528_181929.jpg 20220528_181939.jpg
- 0 Replies
- 1008 Views
-
Last post by Melba Nolan
Tue Oct 22, 2024 4:12 pm
-
-
Wanted: Low Radiator
Replies: 3
by
Fozz71 » Sun Oct 20, 2024 9:44 pm
First post
Anyone have a working low radiator sitting around? I’m in northern IL and my 1919 needs a little better one.
Thanks,
James
Last post
Joe, my radiator is pretty beaten up and although it holds water, I do think it is time for an upgrade. Can you message me and we can exchange details? Thanks!
- 3 Replies
- 1090 Views
-
Last post by Fozz71
Tue Oct 22, 2024 11:44 am
-
-
steering bracket
by
Melba Nolan » Mon Oct 21, 2024 11:52 pm
For sale: steering gear to frame bracket $20 plus postage
1926-27
20220528_180932.jpg
- 0 Replies
- 896 Views
-
Last post by Melba Nolan
Mon Oct 21, 2024 11:52 pm
-
-
Sold Starter Field Coil
Replies: 4
by
RVA23T » Sun Feb 04, 2024 1:06 am
First post
New Field Coil 5107 $50.00 + shipping.
Check, cash in a birthday card, Zelle, PayPal F&F.
kampfdackel85(at)yahoo(period)com
8049#5593#96 txt, call, email. 5107 starter field coil.jpg sfcside1.jpg sfcside2.jpg sfctop.jpg
Last post
No worries, thanks anyway
- 4 Replies
- 1743 Views
-
Last post by Texasroadkill
Mon Oct 21, 2024 11:49 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
