Classifieds - Parts - Page 31

Classifieds - Parts

New Topic

9271 topics

Page 31 of 93
- Jump to page:
Previous
1
…
29
30
31
32
33
…
93
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79778 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS foot pedal and exhaust cut out

Last post by Karl Von Neumann « Sun Aug 11, 2024 12:02 pm
Replies: 1
by Karl Von Neumann » Sat Jun 29, 2024 1:25 pm

First post

Cut out is crusty pedal move free and locks $40 plus the ride

Last post

Move to top

1 Replies

687 Views

Last post by Karl Von Neumann
Sun Aug 11, 2024 12:02 pm
Wanted Running board mounted spare holder.

Last post by Belliott3 « Sun Aug 11, 2024 9:01 am
Replies: 7
by Chris Haynes » Tue Aug 06, 2024 11:22 pm

First post

I am looking for the spare holder that mounted on the cowl and running board on the drivers side.

Last post

Hey Richard, if the upper part in your barn is still available and no one has spoken for it, I’d be interested: I have the bottom carrier but nothing to secure the top. I sent you a PM

7 Replies

2012 Views

Last post by Belliott3
Sun Aug 11, 2024 9:01 am
crank Sold

Last post by Melba Nolan « Sat Aug 10, 2024 7:28 pm

by Melba Nolan » Sat Aug 10, 2024 7:28 pm

For sale: starting crank in good condition $35 plus shipping
20230222_085253.jpg

0 Replies

1146 Views

Last post by Melba Nolan
Sat Aug 10, 2024 7:28 pm
FS rebuilt Holley NH center drain carburetor *sold pending payment*

Last post by NealW « Sat Aug 10, 2024 4:45 pm

by NealW » Sat Aug 10, 2024 4:45 pm

I am selling a Bruce Compton rebuilt Holley NH center drain carburetor. It was my spare carburetor, but I since picked up a Holley G for that purpose, which is more correct for our T.

The price is $200, which includes tracked shipping within the US. Please contact me using the information below. Please do not IM me through the forum site as I may...

0 Replies

1282 Views

Last post by NealW
Sat Aug 10, 2024 4:45 pm
fan pulley

Last post by Moxie26 « Sat Aug 10, 2024 2:36 pm
Replies: 3
by Melba Nolan » Sat Jun 29, 2024 8:14 pm

First post

20240629_124229.jpg
For sale: fan pulley $20 plus postage

Last post

Used with 5 row radiator.

3 Replies

867 Views

Last post by Moxie26
Sat Aug 10, 2024 2:36 pm
tools

Last post by Melba Nolan « Sat Aug 10, 2024 1:06 pm
Replies: 3
by Melba Nolan » Wed Jun 26, 2024 5:13 pm

First post

For sale: Spark plug and head bolt wrench $20 plus postage

Flywheel cap screw 5Z210 $25 plus postage

Ford script number M-40-17017 $5 plus postage

Williams #2650 9/16 boxsocket wrench (Piston pin bolt) $20 plus postage

Last post

move to top

3 Replies

1270 Views

Last post by Melba Nolan
Sat Aug 10, 2024 1:06 pm
FS stamped steering wheel Spiders

Last post by Karl Von Neumann « Sat Aug 10, 2024 12:05 pm
Replies: 2
by Karl Von Neumann » Mon Aug 05, 2024 7:08 pm

First post

Steering wheel Spiders decent paint chips and scratches 10$ each plus the ride

Last post

Move to top

2 Replies

858 Views

Last post by Karl Von Neumann
Sat Aug 10, 2024 12:05 pm
FS u joint

Last post by Karl Von Neumann « Sat Aug 10, 2024 12:04 pm
Replies: 1
by Karl Von Neumann » Wed Aug 07, 2024 1:12 pm

First post

Used u joint shows a but of wear but very usable $50 shipped lower 48

Last post

Move to top

1 Replies

686 Views

Last post by Karl Von Neumann
Sat Aug 10, 2024 12:04 pm
FS TIMERS (SOLD)

Last post by Mark Chaffin « Sat Aug 10, 2024 11:28 am
Replies: 5
by Mark Chaffin » Fri Aug 09, 2024 5:45 pm

First post

Various timer is good condition. Take your pick $45 each plus $9.50 domestic shipping. Combine and save on shipping. Mark Chaffin (951) 805-0928

20240809_135625.jpg

20240809_135706.jpg

Last post

All sold. :)

5 Replies

878 Views

Last post by Mark Chaffin
Sat Aug 10, 2024 11:28 am
FS REAR AXLE BEARINGS (SOLD)

Last post by Mark Chaffin « Sat Aug 10, 2024 11:23 am
Replies: 2
by Mark Chaffin » Fri Aug 09, 2024 5:27 pm

First post

Two good rear axle bearings $40 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20240809_121455.jpg

Last post

Sold to Doug. Thank you. :
Email sent.

2 Replies

641 Views

Last post by Mark Chaffin
Sat Aug 10, 2024 11:23 am
FS RADIATOR MOUNTING SETS (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 10:48 pm
Replies: 2
by Mark Chaffin » Fri Aug 09, 2024 5:30 pm

First post

Radiator mounting sets (20-25). Retail is $22.50. Take your pick $15 plus domestic shipping. Mark Chaffin (951) 805-0928

20240807_092241.jpg

Last post

#1 sold to Steve.

2 Replies

659 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 10:48 pm
FS BODY BRACKET SET (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 9:08 pm
Replies: 1
by Mark Chaffin » Fri Aug 09, 2024 5:26 pm

First post

Body bracket set $35.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20240809_122638.jpg

Last post

Sold to Rich. :)

1 Replies

472 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 9:08 pm
FS BENDIX ASSEMBLIES (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 9:07 pm
Replies: 2
by Mark Chaffin » Fri Aug 09, 2024 5:40 pm

First post

Two nice used Bendix assemblies as described below. Mark Chaffin (951) 805-0928

20240809_121750.jpg
Bendix Assembly #1. Very good condition. $65 plus $9.50 domestic shipping. SOLD

20240809_121706.jpg
Bendix Assembly #2. Very good condition; however minor weld repair to Bedix sleeve. $45 plus $9.50 domestic shipping. SOLD

Last post

#2 sold to Rich.

2 Replies

527 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 9:07 pm
FS CRANKSHAFT PULLEY (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 9:05 pm
Replies: 2
by Mark Chaffin » Fri Aug 09, 2024 5:36 pm

First post

One very nice Dan McEachern aluminum crankshaft pulley with pin. Retail $50. Get this one for $40 plus domestic shipping. Mark Chaffin (951) 805-0928

20240809_121913.jpg

Last post

Sold to Rich. Thank you. :)

2 Replies

589 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 9:05 pm
FS KW MASTER VIBRATOR (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 8:06 pm
Replies: 5
by Mark Chaffin » Wed Jul 31, 2024 4:05 pm

First post

Early style KW Master Vibrator with YALE lock. No Key. This unit is in excellent condition. Price WAS $100 NOW $50 with free domestic shipping. Mark Chaffin (951) 805-0928

20240731_123714.jpg

20240731_123759.jpg

20240731_123741.jpg

Last post

Sold to Phillip. :)

5 Replies

1194 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 8:06 pm
FS DRIVESHAFT SPOOL SLEEVES (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 8:05 pm
Replies: 2
by Mark Chaffin » Fri Aug 09, 2024 5:43 pm

First post

Two NOS HYATT driveshaft spool sleeves for the early closed driveshaft spool (11-21). Reproductions retail for over $30. Get these for $25 each plus domestic shipping. Mark Chaffin (951) 805-0928

20240809_122014.jpg

Last post

Sold to Ron. :)

2 Replies

603 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 8:05 pm
FS WINFIELD ARRESTORS (SOLD)

Last post by Mark Chaffin « Fri Aug 09, 2024 8:02 pm
Replies: 2
by Mark Chaffin » Fri Aug 09, 2024 6:49 pm

First post

One pair of Winfield carburetor arrestors. Price for the pair is $40 plus domestic shipping. Mark Chaffin (951) 805-0928

Winfield 247 A.jpg
For Winfield Model M201A carburetor

Winfield 247 C.jpg
For Winfield Model M201C carburetor

Last post

Sold to Ed Ned. :)

2 Replies

717 Views

Last post by Mark Chaffin
Fri Aug 09, 2024 8:02 pm
WTB step plate

Last post by Jswope « Fri Aug 09, 2024 4:48 pm

by Jswope » Fri Aug 09, 2024 4:48 pm

Step Plate.jpg
I am looking for one more step plate to match the two I already have. Amy information would be helpful. Thanks!

0 Replies

1112 Views

Last post by Jswope
Fri Aug 09, 2024 4:48 pm
water pump

Last post by Melba Nolan « Fri Aug 09, 2024 1:24 pm

by Melba Nolan » Fri Aug 09, 2024 1:24 pm

For sale: water pump $125 plus shipping

20240706_115531.jpg 20240706_115552.jpg

0 Replies

1099 Views

Last post by Melba Nolan
Fri Aug 09, 2024 1:24 pm
WTB Brake equalizer for '23 touring - Found one

Last post by Original Smith « Fri Aug 09, 2024 12:40 pm
Replies: 8
by Arbs » Wed Aug 07, 2024 9:18 am

First post

Greetings! I'm looking for a brake equalizer that fits a '23. I see ones for sale at the vendors for '26-'27 but not older cars. If you have one you would be willing to sell, know where I can get one, or have plans of how I can put one together, I would appreciate it.

Thanks,

Dan

Last post

Any equalizer? The reproduction equalizers are not even close to the originals.
The best thing to do is to research what each brand did with their brakes originally. I think Bennett brakes are the only ones that used rods.

8 Replies

1782 Views

Last post by Original Smith
Fri Aug 09, 2024 12:40 pm
FS Accessory Oil Level Gauge (SOLD)

Last post by ThreePedalTapDancer « Fri Aug 09, 2024 9:14 am
Replies: 2
by ThreePedalTapDancer » Sun Jul 07, 2024 10:11 am

First post

Here is an original T solid polished brass accessory oil level gauge. It attaches in place of lower oil peacock. Unsure how it works, I believe the top is pulled up and released, and it settles to show current oil level on the dipstick. It uses a leather seal like a pump, not a cork. Very heavy duty, clean and nicely made. 16.5 inches tall. 100...

Last post

100 includes shipping

2 Replies

1399 Views

Last post by ThreePedalTapDancer
Fri Aug 09, 2024 9:14 am
Looking for spare 21” Rim and mount for ‘26 Coupe. FOUND!!!

Last post by Hangmancalif « Fri Aug 09, 2024 2:00 am
Replies: 18
by Hangmancalif » Wed Jul 24, 2024 12:15 pm

First post

Need spare rim 21” and rear mounting bracket for a ‘26 coupe. Any suggestions appreciated. My current wheels are wood spoke and the detachable rims are 4 lug. I just need the rim (with tire) as well as the Y type mount for the rear of the car. I appreciate any info and help.

Last post

Thank you.

18 Replies

3557 Views

Last post by Hangmancalif
Fri Aug 09, 2024 2:00 am
For Sale: Bosch ZU4 Magneto

Last post by GGZ « Thu Aug 08, 2024 11:03 pm
Replies: 5
by GGZ » Thu Apr 18, 2024 6:03 pm

First post

Here is an incomplete Bosch ZU4 that turns clockwise. The magneto turns smoothly. It's dirty but good. Take a look at the photos, it is what it is.

The price is 85.00 including shipping in the USA (It is HEAVY!)

Here is a copy of the Bosch ZU4 manual:

Call 734-730-4274 or email: motoringicons@hotmail.com

Last post

Still for sale....

5 Replies

1579 Views

Last post by GGZ
Thu Aug 08, 2024 11:03 pm
FS Brass Minerva Exhaust Whistle (SOLD)

Last post by ThreePedalTapDancer « Thu Aug 08, 2024 6:53 pm
Replies: 1
by ThreePedalTapDancer » Thu Aug 08, 2024 6:53 pm

First post

Original brass Minerva exhaust whistle. Designed to clamp onto the end of the muffler pipe. (See similar example mounted in pic) Good condition, and puts out a very nice loud mournful train whistle sound at speed. Requires very little low pressure to activate. Works by pulling little spring loaded door closed from front seat, diverting exhaust...

Last post

IMG_3509.jpeg

1 Replies

745 Views

Last post by ThreePedalTapDancer
Thu Aug 08, 2024 6:53 pm
WTB 1926 Fordoor trim piece

Last post by Tinner12 « Thu Aug 08, 2024 6:47 pm
Replies: 2
by Tinner12 » Fri Aug 02, 2024 8:42 am

First post

I need the metal trim piece that goes inside the car below the header. See picture. Have my interior about done but need this piece. This is on another car of a friend

Last post

don't need it any more made one. Have interior all done Ya Hoo

2 Replies

740 Views

Last post by Tinner12
Thu Aug 08, 2024 6:47 pm
Sure Feed Oiling System For Sale Sold

Last post by South Park Zephyr « Thu Aug 08, 2024 3:31 pm
Replies: 4
by elliott1936 » Tue Sep 19, 2023 1:36 pm

First post

This is an original Sure Feed Oiling System for the model T. It can used with the two different ways to drain the oil from the hogs head cover into the front of the pan. It has the original fitting that bolts to the pan to engine bolts and drains the oil through one of the bolts that would hold the pan to the engine. The way that I used this until...

Last post

Check is in the mail

Thanks,
Scott

4 Replies

1665 Views

Last post by South Park Zephyr
Thu Aug 08, 2024 3:31 pm
26-7 ruckstel rear axle for sale

Last post by JTT3 « Thu Aug 08, 2024 1:09 pm
Replies: 3
by Joe Bell » Wed Aug 07, 2024 4:44 pm

First post

Have a 26-7 ruckstel, new axle, 13 tooth pinion gear looks brand new, looks like it has all been rebuilt, first 1500 will take it home. 419-618-1025 Tiffin Ohio

Last post

I knew that would be a quick sale. Great price!

3 Replies

1253 Views

Last post by JTT3
Thu Aug 08, 2024 1:09 pm
FS T932 column mount

Last post by Karl Von Neumann « Wed Aug 07, 2024 5:12 pm
Replies: 1
by Karl Von Neumann » Wed Aug 07, 2024 1:11 pm

First post

3 column mounts 20 each plus the ride one of the t932c has a busted edge seen in pics 15$ for that one plus the ride

Last post

T932 b is sold

1 Replies

694 Views

Last post by Karl Von Neumann
Wed Aug 07, 2024 5:12 pm
WTB Rear Wheel Puller

Last post by Wkndead « Wed Aug 07, 2024 3:33 pm

by Wkndead » Wed Aug 07, 2024 3:33 pm

Looking for a Hayes rear-wheel puller or one that works as it should. It can be a homemade one like the ones I've seen on the forum as long as it works.

Rick

0 Replies

1163 Views

Last post by Wkndead
Wed Aug 07, 2024 3:33 pm
WTB WIRE WHEELS

Last post by Wkndead « Wed Aug 07, 2024 3:25 pm
Replies: 5
by Wkndead » Thu Jul 11, 2024 9:22 am

First post

I am looking for a complete set of after-market wire wheels on or near the East Coast. Demountables or not. If anyone has anything email email thru the forum. Must be usable. Any help in locating a set would be greatly appreciated.

Last post

Thanks to everyone. I got a nice set of Hayes locally.

Thanks, MTFCA

5 Replies

1488 Views

Last post by Wkndead
Wed Aug 07, 2024 3:25 pm
WTB Small drum wire wheel rear hubs

Last post by Wkndead « Wed Aug 07, 2024 3:23 pm
Replies: 21
by Wkndead » Wed Jul 17, 2024 1:12 pm

First post

I know it's a long shot but I am looking for a set of small drum wire wheel rear wheel hubs. Even if you only have one. Any leads are greatly appreciated.

Rick

Last post

Thanks to everyone. I got what I needed.
Thanks MTFCA

21 Replies

4126 Views

Last post by Wkndead
Wed Aug 07, 2024 3:23 pm
For sale Y bracket for 26/27 model t

Last post by elliott1936 « Wed Aug 07, 2024 2:57 pm
Replies: 1
by elliott1936 » Fri Aug 02, 2024 3:22 pm

First post

This y bracket is for the 26/27 model T and is in nice condition. $75.00 plus the cost of postage to your door. Tom

Last post

Back to the top

1 Replies

786 Views

Last post by elliott1936
Wed Aug 07, 2024 2:57 pm
FS ATWATER KENT SWITCH / COIL (SOLD)

Last post by Mark Chaffin « Wed Aug 07, 2024 1:47 pm
Replies: 2
by Mark Chaffin » Wed Jul 31, 2024 4:00 pm

First post

Atwater Kent switch / coil unit for distributor. Model F. Missing key. Easy fix. Notation on back indicates the coil has been replaced / repaired. Price WAS $100 NOW $75 with free domestic shipping. Mark Chaffin (951) 805-0928

20240731_123252.jpg

20240731_123302.jpg

20230813_194000.jpg

20240731_123314.jpg

Last post

Sold to Bill. Thank you. :)

2 Replies

748 Views

Last post by Mark Chaffin
Wed Aug 07, 2024 1:47 pm
FS horn parts

Last post by Karl Von Neumann « Wed Aug 07, 2024 12:30 pm
Replies: 2
by Karl Von Neumann » Wed Jul 24, 2024 1:13 pm

First post

Horns $35 each plus the ride the complete one I have not tested no idea if it works bracket is broken. Separate bracket 20$ plus the ride

Last post

Move to top

2 Replies

972 Views

Last post by Karl Von Neumann
Wed Aug 07, 2024 12:30 pm
Sold: Rare Brass Era Two Tube Whistle from Lee Tire & Rubber Company

Last post by GGZ « Tue Aug 06, 2024 7:56 pm
Replies: 1
by GGZ » Tue Aug 06, 2024 7:55 pm

First post

SOLD to Arizona! This is an extremely rare and wonderful brass era, two-tube brass exhaust whistle. It was made by the Lee Tire & Rubber Company in Conshohocken, Pennsylvania. It measures about 11 long, about 2 wide and has an inlet with about 1 3/4 ID. It is in excellent condition and has been gently cleaned. It works well and is extremely well...

Last post

More photos....

1 Replies

682 Views

Last post by GGZ
Tue Aug 06, 2024 7:56 pm
SOLD stromberg mb1

Last post by Scott_Conger « Tue Aug 06, 2024 3:53 pm
Replies: 1
by Karl Von Neumann » Tue Aug 06, 2024 3:00 pm

First post

Mb1 carb barn fresh complete 200$ shipped lower 48

Sold thanks scott

Last post

Email Sent

1 Replies

890 Views

Last post by Scott_Conger
Tue Aug 06, 2024 3:53 pm
1913 Ford light delivery price drop

Last post by YellowTRacer « Tue Aug 06, 2024 3:18 pm

by YellowTRacer » Tue Aug 06, 2024 3:18 pm

Sooner or later some ones going to wake up to what a deal this is. The 30X3 1/2 wire wheels are worth a bundle by themselves. An original authentic 1913 Ford Model T light delivery, not a repo body, but original. Very authentic with what appears to be a brush painted 1940s/50s repaint and some tacked on black vinyl upholstery fix up . Chassis is...

0 Replies

1395 Views

Last post by YellowTRacer
Tue Aug 06, 2024 3:18 pm
1915/16 PARTS WANTED

Last post by Don ellis « Tue Aug 06, 2024 2:46 pm
Replies: 2
by Stephen1915 » Sat Aug 03, 2024 12:47 pm

First post

Looking for the following parts to help complete my restoration! Please call me at 314-287-1901. If you have anything seen here you would like to sell.

•Looking for a nice 1915-1919 closer car lower windshield frame with pull handles. Not Knobs.

•Looking for hinges and hardware for 1915-1919 closed car windshield frames.

•Looking for 1915 to...

Last post

Is this what you’re looking for?

2 Replies

1108 Views

Last post by Don ellis
Tue Aug 06, 2024 2:46 pm
FS: (SOLD) Heavy Duty J.J. Miller Tire Tool. Clincher and Balloon Tires

Last post by Karl Von Neumann « Tue Aug 06, 2024 1:13 pm
Replies: 1
by WaltM » Tue Aug 06, 2024 11:12 am

First post

SOLD Thanks, Walt

Last post

Man I could use that hopefully some parts sell and I can grab that

1 Replies

725 Views

Last post by Karl Von Neumann
Tue Aug 06, 2024 1:13 pm
WTB, Fan Shaft grease cup

Last post by TRDxB2 « Tue Aug 06, 2024 12:25 pm
Replies: 4
by Original Smith » Mon Aug 05, 2024 12:15 pm

First post

These parts are not listed separately in the parts book. I want to stipulate the entire assembly is solid brass and screws onto the fan shaft. Don't want a reproduction. Need the grease cup and the nut it screws onto.

Last post

These parts are not listed separately in the parts book. I want to stipulate the entire assembly is solid brass and screws onto the fan shaft. Don't want a reproduction. Need the grease cup and the nut it screws onto.

Understand that your looking for originals not repros.
Just to confirm: when you say you want the entire assembly ... then......

4 Replies

1262 Views

Last post by TRDxB2
Tue Aug 06, 2024 12:25 pm
Wanted: Carburetor

Last post by Fozz71 « Tue Aug 06, 2024 8:59 am
Replies: 4
by Fozz71 » Thu Aug 01, 2024 1:23 pm

First post

Looking for an NH or Kingston Carb for a 1926 Model T. If you have one for sale 6306083978

Thanks,
Jim

Last post

Thank you to all, I was able to secure a new and good carburetor.

4 Replies

1392 Views

Last post by Fozz71
Tue Aug 06, 2024 8:59 am
F-S CRANKCASE OIL CHECK TOOL

Last post by John iaccino « Tue Aug 06, 2024 8:11 am
Replies: 2
by John iaccino » Sat Jul 27, 2024 3:42 pm

First post

This tool is not a re-pop. Original tool with point to clear out band fuzz from the transmission pet-cock. Excellent condition. $30 plus shipping.
USA only.

Last post

Sold to Cary Nicholas pending funds.

2 Replies

1090 Views

Last post by John iaccino
Tue Aug 06, 2024 8:11 am
WTB pre 1915 flywheel magnet

Last post by Dan Hatch « Tue Aug 06, 2024 2:39 am
Replies: 6
by Original14T » Wed Jul 24, 2024 4:39 am

First post

Hi folks,

I am currently going through all the mechanicals of my unrestored 14 touring car and have found one of the flywheel magnets has a crack. I am chasing another as I can't see new ones for sale at the parts vendors. These are the smaller 5/8 section ones rather than the later 3/4 size. Please let me know if you have one or two that you...

Last post

I have more it anyone else needs some. $5.00 each + shipping.

6 Replies

1286 Views

Last post by Dan Hatch
Tue Aug 06, 2024 2:39 am
model T wood to Model A wheel adapter set

Last post by Gene_French « Mon Aug 05, 2024 11:07 pm
Replies: 3
by Gene_French » Sat Jul 06, 2024 3:15 pm

First post

For sale : set of 4 wheel adapters used to mount Model A wire wheels on Model T wood wheel hubs ... these are currently listed by several parts distributors priced in the $750- $775 price range ... price of $600 + $18.20 postage in lower 48 states , actual postage outside this area ir INTERNATIONAL ... Gene French 970-581-2808 or...

Last post

SOLD ...thanks MTFCA

3 Replies

1084 Views

Last post by Gene_French
Mon Aug 05, 2024 11:07 pm
FS TT running boards

Last post by Karl Von Neumann « Mon Aug 05, 2024 8:09 pm
Replies: 2
by Karl Von Neumann » Sat May 04, 2024 10:22 am

First post

Boot scrapers the 4 shorter ones are pretty nice 40$ each plus the ride the 2 longer ones are kinda trashy 30 for the pair plus the ride

Last post

Move to top

2 Replies

678 Views

Last post by Karl Von Neumann
Mon Aug 05, 2024 8:09 pm
FS mag coils individual

Last post by Karl Von Neumann « Mon Aug 05, 2024 7:07 pm

by Karl Von Neumann » Mon Aug 05, 2024 7:07 pm

Individual mag coils I will pull them off this mag plate 10$ each plus the ride

0 Replies

1105 Views

Last post by Karl Von Neumann
Mon Aug 05, 2024 7:07 pm
WTB:WIND WING THUMB NUT

Last post by Brent Mize « Mon Aug 05, 2024 6:08 pm
Replies: 6
by Brent Mize » Fri Aug 02, 2024 12:32 pm

First post

Hello all,
I’m looking for I’ve of these thumb nuts for my Ford Wind Wings.
I misplaced one and really in need of one. So, if there’s one in your hardware pile, send me a price and I’ll send you the money.
The thread pitch is 5/16-24. There’s nothing in the catalogs that come close.
Thanks for your help!
Brent

Last post

Model T Wind Wing for 27

6 Replies

1471 Views

Last post by Brent Mize
Mon Aug 05, 2024 6:08 pm
Dyke's Motor Manual 1st edition SOLD

Last post by Layden Butler « Mon Aug 05, 2024 4:25 pm
Replies: 1
by Layden Butler » Mon Aug 05, 2024 4:21 pm

First post

Very nice complete 1st edition of this rare 221 page Dykes Motor Manual, detailed info and pictures of motorcycle, aircraft and other engines, including carburetion and ignition.

Last post

More pictures

1 Replies

534 Views

Last post by Layden Butler
Mon Aug 05, 2024 4:25 pm
1919 C-Door $3000

Last post by ChuckLebeda « Mon Aug 05, 2024 3:01 pm
Replies: 2
by ChuckLebeda » Mon Aug 05, 2024 2:11 pm

First post

Found this ad on FB for a C door by Sioux Falls, SD, if anyone is interested.

I have no connection to this seller.

Chuck

Last post

Three may even be a bit high for it; maybe negotiable? But looks like a potential project for someone. I have a1919 C-door, so not wanting another project.

2 Replies

726 Views

Last post by ChuckLebeda
Mon Aug 05, 2024 3:01 pm
Looking for Model T Ford Coil Box Switch Lever Key

Last post by Don Demio « Mon Aug 05, 2024 11:49 am

by Don Demio » Mon Aug 05, 2024 11:49 am

The key pictured below, part # T-5815, was produced for only a three (3) month period from April 12, 1913 through July 10, 1913. According to company records there were 61,495 cars produced during this time frame. The design change was to eliminate the square hole for the Prestolite tank valve and the 5/16 hex hole for the coil vibrator nut. Help...

0 Replies

1063 Views

Last post by Don Demio
Mon Aug 05, 2024 11:49 am
WTB - front drop axle

Last post by AEyssen « Mon Aug 05, 2024 10:59 am

by AEyssen » Mon Aug 05, 2024 10:59 am

Speedster build. Looking for a drop front axle. Have donor axle(s) if required.

0 Replies

1076 Views

Last post by AEyssen
Mon Aug 05, 2024 10:59 am
SOLD New lined brake shoes for sale

Last post by Allan « Mon Aug 05, 2024 7:17 am
Replies: 4
by colonelpowers » Sun Aug 04, 2024 2:45 pm

First post

This is a new set of shoes that I no longer have a need for. I think that Snyder's is getting $110 plus tax and shipping. Is $100 shipped fair?

Last post

Craig, I was not bidding, just expressing the obvious!

Allan from down under.

4 Replies

935 Views

Last post by Allan
Mon Aug 05, 2024 7:17 am
Still looking

Last post by Dollisdad « Sun Aug 04, 2024 3:15 pm

by Dollisdad » Sun Aug 04, 2024 3:15 pm

for a 11-16 brass radiator, preferably a 13/14 that has this appearance. Unrestored. Doesn’t have to hold water. For display. IMG_0336.jpeg

0 Replies

1170 Views

Last post by Dollisdad
Sun Aug 04, 2024 3:15 pm
Model T 1909 Thank You

Last post by Larry Debaugh « Sun Aug 04, 2024 1:53 pm
Replies: 6
by MdDWS » Sat Aug 03, 2024 10:52 am

First post

Thank you!

Last post

Sent you an email, I have several rebuilt jacks .. that work, I made the spark plug wrench… Larry Debaugh

6 Replies

1752 Views

Last post by Larry Debaugh
Sun Aug 04, 2024 1:53 pm
WTB:single carb. downdraft manifold for model A Ford

Last post by Gene_French « Sun Aug 04, 2024 11:36 am

by Gene_French » Sun Aug 04, 2024 11:36 am

WTB: i am looking for a single carburetor downdraft manifold for Model A Ford engine ... prefer for 2 bolt pattern Holley or Carter carb. with 1 7/16 to 1 1/2 throttle bore ... i can machine an adapter as needed , but i am looking for a period correct manifold ...Gene French 970-581-2808 or email gfrench1953@hotmail.com

0 Replies

1080 Views

Last post by Gene_French
Sun Aug 04, 2024 11:36 am
FS 1913 ILL plate for T

Last post by fordrelic « Sun Aug 04, 2024 7:47 am
Replies: 8
by fordrelic » Tue Nov 21, 2023 9:02 am

First post

Rare 1913 Illinois license plate for your model T.

$190 includes domestic insured shipping.

Happy Holidays. 1913 Ill plate.jpg

Last post

to the top

8 Replies

1806 Views

Last post by fordrelic
Sun Aug 04, 2024 7:47 am
F-S ANOTHER BAND CHANGING TOOL

Last post by John iaccino « Sun Aug 04, 2024 6:07 am
Replies: 7
by John iaccino » Sat Jul 27, 2024 3:48 pm

First post

This tool, when fed down the left side of tranny, grabs the bands and guides them around the transmission drum. Excellent condition. $25 plus shipping.
USA only.

Last post

I don't do PayPal. Please send personal check to address in Personal Message I sent to you.

7 Replies

1475 Views

Last post by John iaccino
Sun Aug 04, 2024 6:07 am
WTB - Restorable or any part of a 1914 Coil Box & Switch

Last post by gtttrobinson « Sat Aug 03, 2024 11:58 pm
Replies: 1
by gtttrobinson » Mon Jul 08, 2024 8:12 pm

First post

Hi all,

Looking for a restorable 1914 coil box/switch or parts of.

Getting a fairly original car back in shape.

Gerald

Last post

These are very hard to find but you can buy a nice replica

1 Replies

630 Views

Last post by gtttrobinson
Sat Aug 03, 2024 11:58 pm
Moto- Meter and Emblem

Last post by Model T Matt « Sat Aug 03, 2024 10:53 pm
Replies: 1
by Model T Matt » Fri Aug 02, 2024 4:56 pm

First post

Time to dress up the T for the Ball ? $125.00 buys the group shipped to your door give me a call 503-824-2681 Matt

Last post

Headed to Idaho Thanks Joe

1 Replies

669 Views

Last post by Model T Matt
Sat Aug 03, 2024 10:53 pm
Engines 1920s F/S

Last post by Layden Butler « Sat Aug 03, 2024 4:10 pm

by Layden Butler » Sat Aug 03, 2024 4:10 pm

Take your pick from 6 Model T engines from the 1920s, no accessories such as manifolds, starters or generators. $150 each pick up here in Northern California. Happy to send pictures. NO SHIPPING

0 Replies

1252 Views

Last post by Layden Butler
Sat Aug 03, 2024 4:10 pm
FS trans main shaft

Last post by Karl Von Neumann « Sat Aug 03, 2024 1:42 pm
Replies: 4
by Karl Von Neumann » Wed May 15, 2024 3:21 pm

First post

Blow out sale $35 each plus the ride 3 pictured several more avaliable has usual shelf rust should clean up fine

Last post

Move to top

4 Replies

1319 Views

Last post by Karl Von Neumann
Sat Aug 03, 2024 1:42 pm
xxxxxxxxxxxxxxxxxx

Last post by GGZ « Sat Aug 03, 2024 1:20 pm
Replies: 3
by GGZ » Mon Jul 22, 2024 4:54 pm

First post

xxxxxxxxxxxxxxxxxxxx

Last post

xxxxxxxxxxxxxxxxxxxxx

3 Replies

1053 Views

Last post by GGZ
Sat Aug 03, 2024 1:20 pm
FS Early Two Piece U-joint Ball End - SOLD

Last post by Ken Buhler « Sat Aug 03, 2024 1:06 pm

by Ken Buhler » Sat Aug 03, 2024 1:06 pm

These parts are in very nice condition. $225 plus shipping from V1W 2X6.
IMG_4020.JPG
IMG_4019.JPG

0 Replies

1143 Views

Last post by Ken Buhler
Sat Aug 03, 2024 1:06 pm
FS Holley straight thru NH carbs

Last post by KimDobbins « Sat Aug 03, 2024 2:31 am
Replies: 1
by KimDobbins » Wed Jul 31, 2024 3:22 pm

First post

I have 2 straight thru NH carbs for sale. Both are in very nice shape. $225 each. Plus shipping. Kdmks AT att.net.

Last post

Both carbs are sold.

1 Replies

967 Views

Last post by KimDobbins
Sat Aug 03, 2024 2:31 am
Horn and Dog Bone

Last post by Model T Matt « Sat Aug 03, 2024 1:00 am
Replies: 1
by Model T Matt » Fri Aug 02, 2024 5:04 pm

First post

For sale Dog Bone and Small horn for Bike-or Motor Cycle asking $85.00 for both shipped to your location give me a call 503-824-2681 Matt

Last post

Sold Thanks

1 Replies

635 Views

Last post by Model T Matt
Sat Aug 03, 2024 1:00 am
Speedster Body pending sale

Last post by Craig Leach « Fri Aug 02, 2024 10:43 pm
Replies: 5
by Nv Bob » Sat Jul 27, 2024 1:24 am

First post

PENDING SALE thanks MTFCA
See pics Asking 2750 obo
Located western Nv

Last post

Hi Bob,
Tried calling Claud several times with no response. Radiator shell maybe a camera angle. The side view will tell if the tail swoops up on the
rear bottom looking like a stink bug or has the same profile top & bottom as the ad pic does. Please don't take offence they are all super neat
looking I just prefer the lower style tail.
Craig.

5 Replies

1882 Views

Last post by Craig Leach
Fri Aug 02, 2024 10:43 pm
FOUND!! BRACKET 20S ROADSTER

Last post by George House « Fri Aug 02, 2024 8:10 pm
Replies: 7
by Karl Von Neumann » Fri Mar 15, 2024 10:08 pm

First post

I need this bracket for the right hand side of the car if your american we call it passenger side 😜 would take a pair if I had to

Last post

SOLD… Thanks Karl and MTFCA

7 Replies

1737 Views

Last post by George House
Fri Aug 02, 2024 8:10 pm
WTB: 1909-1911 T Ford ‘Open Valve’ Touring Project

Last post by KiwiFordGuy « Fri Aug 02, 2024 7:53 pm
Replies: 3
by KiwiFordGuy » Fri Jul 26, 2024 12:22 am

First post

Hi all, seems 2 cylinder Fords within my budget continue to elude me… I’m sure many of us early Ford fans have this same problem! :D

I’m wondering what still might be around in the way of early T projects. Looking for as complete, original etc as possible.

Definitely want open valve (genuine original/no reproduction/modified later blocks) and...

Last post

Back to the top 😊 thank you

3 Replies

1261 Views

Last post by KiwiFordGuy
Fri Aug 02, 2024 7:53 pm
FS WOOD PICKUP BED HARDWARE SET (SOLD)

Last post by Mark Chaffin « Fri Aug 02, 2024 5:45 pm
Replies: 1
by Mark Chaffin » Fri Aug 02, 2024 5:31 pm

First post

One set of original wood pickup bed hardware. Missing one latch. Available from the dealers. The reproduction hardware sets retail for $459! Get this very nice original set for $150 plus domestic shipping. Mark Chaffin (951) 805-0928

20240802_083242.jpg

20240802_083255.jpg

Last post

Sold. Thank you MTFCA. :)

1 Replies

536 Views

Last post by Mark Chaffin
Fri Aug 02, 2024 5:45 pm
FS Engine Blocks

Last post by John kuehn « Fri Aug 02, 2024 1:27 pm
Replies: 5
by Allan » Thu Aug 01, 2024 12:26 am

First post

Jonathan, if the 26-7 blocks have EE crankshafts, that might help you to sell them.

Allan from down under.

Last post

If I was closer I would buy it all. To good a deal to pass up.

5 Replies

1723 Views

Last post by John kuehn
Fri Aug 02, 2024 1:27 pm
w t b klaxon horn

Last post by Perry Goble « Fri Aug 02, 2024 11:53 am
Replies: 2
by Perry Goble » Mon Jul 22, 2024 4:43 pm

First post

I am looking for hand operated klaxon type horn with a all brass bell .

Last post

Still looking for full bell brass horn for 1915.

2 Replies

938 Views

Last post by Perry Goble
Fri Aug 02, 2024 11:53 am
FS 4 used Edison 14 spark plugs

Last post by NealW « Fri Aug 02, 2024 7:14 am
Replies: 3
by NealW » Thu Aug 01, 2024 10:42 pm

First post

Since I'm in the process of selling our Model T that is equipped with Edison 14 spark plugs, I'm selling these spare Edison 14 plugs for $100, which includes tracked shipping. The plugs are used, but appear to be in good shape.

My contact info is below if interested. No PM please as I probably won't see it.

Neal

Last post

Sold pending payment

3 Replies

1056 Views

Last post by NealW
Fri Aug 02, 2024 7:14 am
FS STEVENS T-181 TOOL (REDUCED PRICE)

Last post by Mark Chaffin « Thu Aug 01, 2024 10:32 pm
Replies: 2
by Mark Chaffin » Mon Jun 17, 2024 5:44 pm

First post

One very nice original STEVENS T-181 hub thread chasing tool. Price WAS $800 NOW $700 with free domestic shipping included. Last one sold on TBay for much more and included sales tax. Not to mention, this one is in much better condition. :) Mark Chaffin (951)805-0928

20240617_143949.jpg

20240617_144005.jpg

Last post

Last call. Doubt you will find a better example of this tool. Sharp edges. Very nice original tool.

2 Replies

1245 Views

Last post by Mark Chaffin
Thu Aug 01, 2024 10:32 pm
WTB 1924 Windshield and top bows

Last post by ModelTRoadster « Thu Aug 01, 2024 6:42 pm
Replies: 3
by Couchsachraga » Mon Jul 29, 2024 8:46 pm

First post

I’m in upstate NY and looking for a windshield for a ‘24 Roadster (23-25 should fit); I have a ‘22 or so on it now that was on it when I purchased it in good condition as well as a ‘26-‘27 that is restorable (surface rust) if anyone is looking to trade (+ cash as appropriate). I’m also looking for top bows, or at the very least irons for a 1 man...

Last post

We do have both, they are located in Churchville, New York. You are welcome to give me a call at 585-738-1988 for more description and price.
Thanks,
Tom Stewart

3 Replies

854 Views

Last post by ModelTRoadster
Thu Aug 01, 2024 6:42 pm
F-S CRANKSHAFT TOOL

Last post by John iaccino « Thu Aug 01, 2024 6:18 pm
Replies: 1
by John iaccino » Fri Jul 26, 2024 2:16 pm

First post

Used to spin crank from flywheel side of engine while engine is on a stand. $65 plus shipping. USA only.

Last post

please re-post

1 Replies

935 Views

Last post by John iaccino
Thu Aug 01, 2024 6:18 pm
F-S Band changing tool

Last post by John iaccino « Thu Aug 01, 2024 6:18 pm
Replies: 1
by John iaccino » Fri Jul 26, 2024 2:14 pm

First post

Band changing tool (never used) $12 plus shipping. USA only

Last post

please re-post

1 Replies

702 Views

Last post by John iaccino
Thu Aug 01, 2024 6:18 pm
F-S PITMAN ARM

Last post by John iaccino « Thu Aug 01, 2024 6:18 pm
Replies: 1
by John iaccino » Fri Jul 26, 2024 2:12 pm

First post

pitman arm in good condition. Ball is round. $30 plus shipping. USA only

Last post

please re-post

1 Replies

676 Views

Last post by John iaccino
Thu Aug 01, 2024 6:18 pm
F-S PULLER

Last post by John iaccino « Thu Aug 01, 2024 6:17 pm
Replies: 1
by John iaccino » Fri Jul 26, 2024 2:06 pm

First post

Old puller that works well on Model T's. No markings. $50 plus shipping, USA only

Last post

please re-post

1 Replies

751 Views

Last post by John iaccino
Thu Aug 01, 2024 6:17 pm
F-S 26-27 E-BRAKE SHOES

Last post by John iaccino « Thu Aug 01, 2024 6:17 pm
Replies: 2
by John iaccino » Sat Jul 13, 2024 6:18 pm

First post

26-27 e-brake shoes good condition, just needs cleaning. $30 plus flat rate shipping. USA only.

Last post

please re-post

2 Replies

799 Views

Last post by John iaccino
Thu Aug 01, 2024 6:17 pm
McCalley and Other Books

Last post by Jim11787 « Thu Aug 01, 2024 5:51 pm
Replies: 1
by mt15 » Thu Aug 01, 2024 5:28 pm

First post

All three books $75 plus $15.95 postage.
Books are clean and have no staining.

Last post

I’ll take them. Will send PM.

1 Replies

474 Views

Last post by Jim11787
Thu Aug 01, 2024 5:51 pm
Brass radiator

Last post by RajoRacer « Thu Aug 01, 2024 5:18 pm
Replies: 2
by Dollisdad » Thu Aug 01, 2024 4:17 pm

First post

In need of a unrestored brass radiator for display. 1911-16, 13/14 preferred. What have you got? Does not have to hold water. It does have to have the neglected look like this. IMG_0292.jpeg

Last post

If Scott can't provide, I'll send you a couple pics. of an orphan I have.

2 Replies

780 Views

Last post by RajoRacer
Thu Aug 01, 2024 5:18 pm
Want to buy a Dayton 6 pin rear wheel hub

Last post by Reno Speedster « Thu Aug 01, 2024 3:29 pm
Replies: 6
by Reno Speedster » Thu Jul 25, 2024 7:25 pm

First post

I am working on my Dayton wheel setup and one of my rear hubs is not as good as I would like. The keyway is good, but there are some issues with the tapered part. It’s useable, but if I could find a better one, I would be happy.

If anyone has one in good shape they are willing to part with, please get in touch.

Last post

Jack,
I have not seen the email. I am sending you another email.

6 Replies

1337 Views

Last post by Reno Speedster
Thu Aug 01, 2024 3:29 pm
misc parts

Last post by Melba Nolan « Thu Aug 01, 2024 1:17 pm
Replies: 4
by Melba Nolan » Sun Jan 21, 2024 11:24 pm

First post

For sale: Radiator mounting studs, plate, springs, castle nuts, washers and cotter pins $10
Starter head sleeve for bendix $8
Starter Switch with extension $30 New
Starter Drive cover $6
Ignition switch with Ford script takes #55 key needs back $50

everything is plus postage combine shipments to save postage

email for pictures...

Last post

move to top

4 Replies

1335 Views

Last post by Melba Nolan
Thu Aug 01, 2024 1:17 pm
water inlet

Last post by Melba Nolan « Thu Aug 01, 2024 1:16 pm
Replies: 2
by Melba Nolan » Mon Jun 17, 2024 11:44 pm

First post

For sale: water inlet in good condition $25 plus postage

20240614_163320 - Copy.jpg

Last post

move to top

2 Replies

738 Views

Last post by Melba Nolan
Thu Aug 01, 2024 1:16 pm
FS OUTSIDE OILERS

Last post by Mark Chaffin « Thu Aug 01, 2024 12:58 pm
Replies: 5
by Mark Chaffin » Thu Jun 20, 2024 1:46 pm

First post

Ford Faithful and Sure Feed outside oilers. Take your pick WAS $45.00 NOW $35.00 plus domestic shipping. Mark Chaffin (951) 805-0928

20240620_100259.jpg
Ford Faithful for 4 dip pan SOLD

20240620_100305.jpg
SURE FEED for 4 dip pan/ SOLD

20240620_100309.jpg
SURE FEED for 3 dip pan

20240620_100314.jpg
SURE FEED for 3 dip pan SOLD

Last post

#4 sold. Thank you

5 Replies

1414 Views

Last post by Mark Chaffin
Thu Aug 01, 2024 12:58 pm
WTB: Early RHD square door transmission cover

Last post by KiwiFordGuy « Wed Jul 31, 2024 9:06 pm

by KiwiFordGuy » Wed Jul 31, 2024 9:06 pm

Hi folks,

Looking for the proverbial needle in a haystack - an early right hand drive square door aluminium transmission cover.

Can anyone help?

Please email via forum email tab or send me a private message.

Thanks Alex

0 Replies

1107 Views

Last post by KiwiFordGuy
Wed Jul 31, 2024 9:06 pm
FS PITMAN ARMS (SOLD)

Last post by Mark Chaffin « Wed Jul 31, 2024 9:02 pm
Replies: 4
by Mark Chaffin » Tue Jul 30, 2024 6:07 pm

First post

Steering pitman arms with very good balls. Take your pick $40 each plus domestic shipping. Mark Chaffin (951) 805-0928

20240730_143254.jpg

Last post

All sold. Thank you

4 Replies

927 Views

Last post by Mark Chaffin
Wed Jul 31, 2024 9:02 pm
WTB aluminum or non brass step plates

Last post by signsup « Wed Jul 31, 2024 12:26 pm
Replies: 3
by Larry LaPatka » Mon Jul 29, 2024 5:14 pm

First post

Need two step plates, can have scratches and flaws since preferred ones with patina. Doesn’t have to say Ford but not another manufacture’s name either. Let me know what you might have.
Regards Larry LaPatka
Email: ltlapatka@gmail.com
Cell or Text: (423). 237-8846

Last post

I have two of these that I was told were Model A plates with boot scrapers. Aluminum, I believe. I don't have a Model A, so if these would work for someone's project, $20 for both plus the trip. step plates pair.JPG

3 Replies

958 Views

Last post by signsup
Wed Jul 31, 2024 12:26 pm
Kingston L4 cores FS SOLD

Last post by Dan Hatch « Wed Jul 31, 2024 11:08 am
Replies: 1
by Dan Hatch » Mon Jul 29, 2024 3:03 pm

First post

Here are two L4 Kingston carbs for cores or parts. I know nothing about them. You know as much as I do. They are in my carb core bucket $60 for the pair + shipping. Email me at address in pictures. Thanks Dan
IMG_3855.jpeg
IMG_3857.jpeg
IMG_3855.jpeg
IMG_0260.jpeg

Last post

Back to the top

1 Replies

510 Views

Last post by Dan Hatch
Wed Jul 31, 2024 11:08 am
FS WINDSHIELD HINGE SET (SOLD)

Last post by Mark Chaffin « Wed Jul 31, 2024 11:03 am
Replies: 1
by Mark Chaffin » Tue Jul 30, 2024 6:13 pm

First post

Brass windshield hinge set (09-12). These retail for $80 per set from the dealers. Get this set for $50 plus domestic shipping. Mark Chaffin (951) 805-0928

20240730_143958.jpg

20240730_144010.jpg

Last post

Sold to Phillip. Thank you

1 Replies

470 Views

Last post by Mark Chaffin
Wed Jul 31, 2024 11:03 am
WTB Jan/Feb Vintage Ford Magazine

Last post by JvanMaanen « Wed Jul 31, 2024 10:58 am
Replies: 5
by KellyJons » Mon Jul 29, 2024 4:55 pm

First post

Hey guys, for some reason I never ended up with the January/February 2024 issue of the Vintage Ford magazine. I’m not sure if it was lost in the mail or the MTFCA just didn’t send me one.

Anybody have a nice copy they’d be willing to sell to me?

Thanks!

Kelly

Last post

Kelly got it

5 Replies

884 Views

Last post by JvanMaanen
Wed Jul 31, 2024 10:58 am
FS HEAD BOLT SET (SOLD)

Last post by Mark Chaffin « Tue Jul 30, 2024 10:09 pm
Replies: 1
by Mark Chaffin » Tue Jul 30, 2024 6:41 pm

First post

New head bolt set. Retail $29.95. Yours for $20 plus domestic shipping. Mark Chaffin (951) 805-0928

20240730_153249.jpg

Last post

Sold to Rich.

1 Replies

500 Views

Last post by Mark Chaffin
Tue Jul 30, 2024 10:09 pm
FS CRANK HANDLE (SOLD)

Last post by Mark Chaffin « Tue Jul 30, 2024 10:08 pm
Replies: 2
by Mark Chaffin » Tue Jul 30, 2024 6:09 pm

First post

One very good late style crank handle with ratchet and retaining pin. The handles are usually frozen in place and do not turn freely. This one turns like it should. Price is $35.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20240730_142933.jpg

Last post

Sold to Rich.

2 Replies

597 Views

Last post by Mark Chaffin
Tue Jul 30, 2024 10:08 pm
Dyke's Encyclopedia 1914 Early 3rd Edition SOLD

Last post by Layden Butler « Tue Jul 30, 2024 9:11 pm
Replies: 3
by Layden Butler » Mon Jul 29, 2024 4:34 pm

First post

Rare early Dyke's Encyclopedia from the brass Model T era, 3rd Edition 1914, famous for 557+ pages of great general automotive reading ( it is 2 thick), aircraft, trucks, tractors, motorcycles, carburetors, general engineering, magnetos. and on and on seemingly forever! Nicely indexed for easy information finding.
Very Good condition complete...

Last post

Spoken for!
Thanks to MTFCA

3 Replies

942 Views

Last post by Layden Butler
Tue Jul 30, 2024 9:11 pm
WTB 26 Coupe left rear fender

Last post by BarnesvilleT « Tue Jul 30, 2024 8:38 pm

by BarnesvilleT » Tue Jul 30, 2024 8:38 pm

Looking for a rear left fender for my 26 Coupe. Had a mishap and mine got mangled.
Look forward to anyone that can sell or if you know who might have one.

Bill H.

0 Replies

991 Views

Last post by BarnesvilleT
Tue Jul 30, 2024 8:38 pm
FS BRAKE SHOE SET (SOLD)

Last post by Mark Chaffin « Tue Jul 30, 2024 8:36 pm
Replies: 1
by Mark Chaffin » Tue Jul 30, 2024 6:03 pm

First post

Last pair of brake shoe sets with Ford script and hardware. Reproduction sets are $110. This set of original Henry are $100 with free domestic shipping. Mark Chaffin (951) 805-0928

20240730_143702.jpg

20240730_143724.jpg

Last post

Sold. Thank you.

1 Replies

460 Views

Last post by Mark Chaffin
Tue Jul 30, 2024 8:36 pm
FS UNIVERSAL JOINT (SOLD)

Last post by Mark Chaffin « Tue Jul 30, 2024 6:24 pm
Replies: 1
by Mark Chaffin » Tue Jul 30, 2024 6:05 pm

First post

One Ford script universal joint in excellent condition. This is the last of the very good ones. Why buy a reproduction when you can have this very nice original. Price is $75.00 plus $9.50 domestic shipping. Mark Chaffin (951) 805-0928

20240730_144231.jpg

Last post

Sold. Thank you.

1 Replies

402 Views

Last post by Mark Chaffin
Tue Jul 30, 2024 6:24 pm
FS; Erickson Leaf Spring Spreader and Lubricator (Reduced Pice)

Last post by WaltM « Tue Jul 30, 2024 5:48 pm
Replies: 3
by WaltM » Thu Dec 07, 2023 2:44 pm

First post

For Sale: Erickson combination leaf spring spreader and lubricator. Tool adjust for a maximum of 2-1/2 inch wide leaf springs. Spreads individual leaves on the leaf spring to lubricate between them. Requires graphite grease for the grease cup. Gives a smoother ride and helps maintain the springs for long life. Weight of vehicle must be off springs...

Last post

to the top

3 Replies

1612 Views

Last post by WaltM
Tue Jul 30, 2024 5:48 pm
SOLD: Williams Leaf Spring Lubricator Spreader For Model T and A or Other Cars

Last post by South Park Zephyr « Tue Jul 30, 2024 3:52 pm
Replies: 1
by GGZ » Tue Jul 30, 2024 3:08 pm

First post

Sold to Scott! An original spring leaf lubricator. Made by W . Measures 5.5” L x 2.5” W. Very nice nickel plating. A good tool to have!!

Price is 135.00 including shipping in the USA

Call at: 734-730-4274 or email me at motoringicons @ hotmail.com

Thanks.

Last post

Text sent

Scott

1 Replies

615 Views

Last post by South Park Zephyr
Tue Jul 30, 2024 3:52 pm
WTB front wheel ball bearing cups

Last post by KeithG « Tue Jul 30, 2024 3:49 pm
Replies: 4
by frank_w » Sun Jul 28, 2024 5:10 pm

First post

Looking for a usable set of the outer (small) ball bearing cups. I already ordered a set of the larger inner bearing cups from Lang's, but I'd also be happy to buy a complete set if you happen to have one.

Last post

Hi Frank, I just send you a personal message through this Forum.

Keith

4 Replies

1099 Views

Last post by KeithG
Tue Jul 30, 2024 3:49 pm

New Topic

9271 topics

Page 31 of 93
- Jump to page:
Previous
1
…
29
30
31
32
33
…
93
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum