Classifieds - Parts - Page 32

Classifieds - Parts

New Topic

9711 topics

Page 32 of 98
- Jump to page:
Previous
1
…
30
31
32
33
34
…
98
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

81521 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

SOLD hyatts pair

Last post by Karl Von Neumann « Sat Sep 21, 2024 10:00 am
Replies: 4
by Karl Von Neumann » Tue Aug 06, 2024 7:25 pm

First post

1 pair of hyatts both measure .498 evenly so they have some life left tight cages 68$ shipped lower 48

More will be availble as soon as I can process them

Last post

I'm interested but a little put off by the surface tarnish . Do they clean up or is that in the metal?

The one is really clean the other is crusty with dirt and grease it should clean up ok to a usable standard

4 Replies

1836 Views

Last post by Karl Von Neumann
Sat Sep 21, 2024 10:00 am
FS: 24-25 Engine Core $100 (P/U Only)

Last post by Rodger Erickson « Sat Sep 21, 2024 8:24 am

by Rodger Erickson » Sat Sep 21, 2024 8:24 am

FS: A 24-25 T Engine that was converted to a stationary application and later found on a farm in Oxnard, CA. The bottom end looks about average, although it looks like the shims have mostly been taken up. The pistons are stuck, and the valves are 2-piece. The block looks pretty good, however. The 4-dip pan is rotted in various places, as this...

0 Replies

994 Views

Last post by Rodger Erickson
Sat Sep 21, 2024 8:24 am
Sold: Stromberg OF Carburetor Parts

Last post by Bruce Compton « Fri Sep 20, 2024 11:17 pm
Replies: 4
by Rodger Erickson » Tue Sep 17, 2024 1:09 pm

First post

FS: two Stromberg OF carburetor bodies with various parts missing or damaged. One early style OF is mostly complete but the needle valves are badly bent and will probably need to be replaced. The other is basically just the body with a few parts still left in place but it's probably salvageable with some work. This project is probably best left...

Last post

Email sent with info. Thanks Rodger.

4 Replies

974 Views

Last post by Bruce Compton
Fri Sep 20, 2024 11:17 pm
FS RUNNING BOARD BOOT SCRAPERS (SOLD)

Last post by Mark Chaffin « Fri Sep 20, 2024 4:19 pm
Replies: 2
by Mark Chaffin » Fri Sep 20, 2024 3:40 pm

First post

One pair of NOS running board boot scrapers $20 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240920_123318 (1).jpg

Last post

Going to Bryan. :)

2 Replies

770 Views

Last post by Mark Chaffin
Fri Sep 20, 2024 4:19 pm
FS Brass Candy NORS

Last post by TRDxB2 « Fri Sep 20, 2024 11:15 am
Replies: 2
by TRDxB2 » Thu Sep 19, 2024 10:23 pm

First post

All items from a project car that was abandoned.
--
IMG_6448.JPG
IMG_6449.JPG
-
1 Side light bracket T-3655-DE $45 plus hipping
2 Tail light bracket T-3661 $29 plus shipping
3 Windshield clamps clamps T-7824BR $4 each ($15 for 4) plus shipping (sold)
4 Clear Lens oil lamp T-6957-W $8 each ($15 for both) plus shipping
5 Headlight rims brass...

Last post

I'll take 3,6,7, and the brass oil cap.

. . Send me an eMail via the forum with your address so I can calculate shipping and payment (PayPal or check).

2 Replies

981 Views

Last post by TRDxB2
Fri Sep 20, 2024 11:15 am
FS: Early to Mid 1926 Rear Crossmember $40

Last post by Rodger Erickson « Fri Sep 20, 2024 10:47 am
Replies: 2
by Rodger Erickson » Tue Sep 17, 2024 10:08 pm

First post

FS: Early to Mid 1926 Rear Crossmember, used junkyard part. This one is in pretty good shape, no major pitting issues, only the spring bolt hole is slightly wallowed. This is the early 26 one without the flange. Asking $40 not including shipping.

t26rrx02.jpg

t26rrx01.jpg

t26rr04.jpg

t26rr03.jpg

Thanks for looking!

Last post

No plans to, unfortunately.

2 Replies

650 Views

Last post by Rodger Erickson
Fri Sep 20, 2024 10:47 am
FS MISCELLANEOUS NOS PARTS

Last post by Mark Chaffin « Fri Sep 20, 2024 9:53 am
Replies: 7
by Mark Chaffin » Tue Sep 17, 2024 3:52 pm

First post

Assortment of NOS parts as indicated below. Mark Chaffin (951) 805-0928

20240917_121848.jpg
Three drag links for tapered ball, one opposite end threaded, one straight shoulder ball. Get the entire lot for WAS $60 NOW $50 with free domestic shipping.

20240917_121903.jpg
10 Tooth Pinion NOS WAS $100 NOW $75 with free domestic shipping. SOLD...

Last post

Two to Tim.

7 Replies

1723 Views

Last post by Mark Chaffin
Fri Sep 20, 2024 9:53 am
Adjustable tie rod new

Last post by frontyboy « Thu Sep 19, 2024 10:36 pm
Replies: 2
by frontyboy » Wed Sep 18, 2024 11:19 pm

First post

I bot this for a project and never used it. Think its a Kim Dobbins repo, got it from Langs about a year ago. $125.00 plus shipping and postage.

brasscarguy@comcast.net

Last post

No I mean the tie rod between both front wheels. Early pre 12? had one end threaded and an adjustable end. This is new manufactured bot from langs, paid nearly $200 with freight.

brasscarguy.

2 Replies

949 Views

Last post by frontyboy
Thu Sep 19, 2024 10:36 pm
WTB: Front seat frame lid for 1917-1922

Last post by adam13 « Thu Sep 19, 2024 8:30 pm

by adam13 » Thu Sep 19, 2024 8:30 pm

Want to buy a front seat frame lid to go over gas tank for a 1917 roadster body. Thanks, AJ Eyre

0 Replies

882 Views

Last post by adam13
Thu Sep 19, 2024 8:30 pm
FS Large Brake Drums for Wire Wheels - Sold

Last post by BuddMan « Thu Sep 19, 2024 7:46 pm
Replies: 2
by BuddMan » Thu Sep 19, 2024 5:51 pm

First post

These were just removed from a pair of 26-27 rear hubs as I have replaced them with small drums for my 1921 speedster project. They ring like a bell! Very good condition. $100 for the pair plus $24.75 for USPS shipping. IMG_0476.jpg

Last post

Sold to Shannon in Texas

2 Replies

627 Views

Last post by BuddMan
Thu Sep 19, 2024 7:46 pm
Rajo for sale

Last post by DustySpokes « Thu Sep 19, 2024 6:37 pm
Replies: 1
by amuffler » Thu Sep 19, 2024 5:39 pm

First post

Rajo Over Head T engine For Sale
The lower end was designed and executed by Tom Holthart of Quality Machine, formally Sants Clara, CA. It consists of a Scat counter balanced crank, full pressure oil to the mains, using a VW, cam driven oil pump. Rods are new forged type with inserts. Tom uses a full A size crank and fits A inserts into the block....

Last post

The engine looks as pretty as a Bugatti ! A clean and well done job from what I see. Idea- perhaps add a picture showing the rockers and shafts ?

1 Replies

943 Views

Last post by DustySpokes
Thu Sep 19, 2024 6:37 pm
FS Bevin Brass Bermuda Bell (SOLD)

Last post by ThreePedalTapDancer « Thu Sep 19, 2024 4:25 pm

by ThreePedalTapDancer » Thu Sep 19, 2024 4:25 pm

Here is an original T era Bevin polished brass Bermuda bell. Heavy thick brass. It has a nice polish, no dents or cracks, just a few small nicks here and there from actual road use under a T. It works great, very, very loud DING DONG! when plunger is depressed. Holds the fading tone after ringing, something only original bells can do. Very clean....

0 Replies

1069 Views

Last post by ThreePedalTapDancer
Thu Sep 19, 2024 4:25 pm
FS Rear Shock Aborbers (Steelbilt) - make an offer!

Last post by Richard K « Thu Sep 19, 2024 3:27 pm
Replies: 2
by jamesb » Sun Sep 15, 2024 8:40 pm

First post

One set of rear shock absorbers that have been identified as Steelbilt brand ( per this thread on the forum ). Most of the key pieces are there, though we are missing one of the bars with the two loops, though this shouldn't be too difficult to fabricate. Based on the pictures in the thread, it also appears that the existing bar may be misshapen,...

Last post

Email. sent for purchase of above items. Rich

2 Replies

827 Views

Last post by Richard K
Thu Sep 19, 2024 3:27 pm
WTB - Crankshaft

Last post by ModelTWoods « Thu Sep 19, 2024 3:06 pm
Replies: 11
by Rick_Benjamin » Sun Sep 15, 2024 2:27 pm

First post

Greetings Friends:

I'm a little ways into the delayed rebuild of the motor for my '23 touring car. I wanted to use the same crankshaft (it's still standard, incredibly), but my machinist just called to tell me that it failed the magnaflux test. Uh-oh.

So, now I'm in search of a good crankshaft. Anybody have one to spare? I'd be grateful to...

Last post

I'd go with an EE crank which are said to be the strongest Ford crank made, if it were mine. No one's going to know the difference, and even if you were the type to enter judging contests, judges aren't going to tear your motor down for inspection like they would at a NASCAR or NHRA event.

11 Replies

2110 Views

Last post by ModelTWoods
Thu Sep 19, 2024 3:06 pm
WTB 30 X 3 1/2 roller tires near Southwest Virginia

Last post by colonelpowers « Thu Sep 19, 2024 1:23 pm

by colonelpowers » Thu Sep 19, 2024 1:23 pm

I just picked up another car. The car is pretty nice but the tires are the worst that I have ever seen and I just need something that I can stick on it with some tubes so that it will be easier to move around until I am able to get it running. If anyone has anything, bald, cracked, whatever as long as they will work around the shop. Thanks.

0 Replies

905 Views

Last post by colonelpowers
Thu Sep 19, 2024 1:23 pm
FS [FREE] Headlight reflector and spring

Last post by jamesb « Thu Sep 19, 2024 11:14 am
Replies: 2
by jamesb » Tue Sep 17, 2024 6:21 pm

First post

Offering a reflector and spring for free. Buyer just pays shipping or free pickup in Burbank, CA. Just trying to clear out some space and would rather not see old parts go in the trash.
PXL_20240917_221652874.jpg

Last post

Sold to thighs bidder for $0. Thanks MTFCA

2 Replies

780 Views

Last post by jamesb
Thu Sep 19, 2024 11:14 am
Water Pump FS Lower price

Last post by Dan Hatch « Thu Sep 19, 2024 9:05 am
Replies: 1
by Dan Hatch » Tue Sep 17, 2024 9:32 am

First post

Here is a water pump in my stuff. Has name on it but hard to read. Looks like one ear has been brazed on. $20+ shipping. Email me at address in pictures. Thanks Dan
IMG_4024.jpeg
IMG_4023.jpeg
IMG_0260.jpeg

Last post

Back to the top lower price

1 Replies

572 Views

Last post by Dan Hatch
Thu Sep 19, 2024 9:05 am
Steering wheel lockFS

Last post by Dan Hatch « Thu Sep 19, 2024 8:23 am

by Dan Hatch » Thu Sep 19, 2024 8:23 am

Steering wheel lock. No sure of make. Looks like key is broken off in lock. $10. + shipping. Email me at address in pictures. Thanks Dan
IMG_4025.jpeg
IMG_4026.jpeg
IMG_4027.jpeg
IMG_0260.jpeg

0 Replies

891 Views

Last post by Dan Hatch
Thu Sep 19, 2024 8:23 am
Brown model 75 tail lamp red lense panel

Last post by Larry Debaugh « Wed Sep 18, 2024 7:05 pm
Replies: 5
by Larry Debaugh » Thu Aug 22, 2024 11:01 am

First post

New spinning for Brown 75 and Possibly 78 tail lamp Red Lense. Originally lenses were spun in place and the rim often split. These have the retaining rim spun and the lense is installed from the inside and epoxied in place . $83 each plus postage Larry Debaugh 4103361728 IMG_8382.jpeg IMG_8381.jpeg IMG_8383.jpeg IMG_8381.jpeg

Last post

3 still available

5 Replies

1913 Views

Last post by Larry Debaugh
Wed Sep 18, 2024 7:05 pm
FS FRONT MOTOR MOUNT (SOLD)

Last post by Mark Chaffin « Wed Sep 18, 2024 6:58 pm
Replies: 1
by Mark Chaffin » Wed Sep 18, 2024 2:09 pm

First post

Front motor mount complete (26/27) $25 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240918_093938.jpg

Last post

Going to Joe. :)

1 Replies

498 Views

Last post by Mark Chaffin
Wed Sep 18, 2024 6:58 pm
FS MANIFOLD CLAMP AND BOLT SET (SOLD)

Last post by Mark Chaffin « Wed Sep 18, 2024 6:57 pm
Replies: 1
by Mark Chaffin » Wed Sep 18, 2024 5:15 pm

First post

One set of manifold clamps with the correct domed bolts for the improved Ford (26/27). Price is $30 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240918_140202 (1).jpg

Last post

Going to Joe.

1 Replies

488 Views

Last post by Mark Chaffin
Wed Sep 18, 2024 6:57 pm
Sold Sleeve & Band tools

Last post by RVA23T « Wed Sep 18, 2024 4:32 pm
Replies: 3
by RVA23T » Mon Sep 16, 2024 3:22 pm

First post

Sold
$20 for the pair/set INCLUSIVE of domestic USPS Shipping.
20240916_111110.jpg

Last post

Email sent.

Sold pending ! Thanks
Message sent

3 Replies

973 Views

Last post by RVA23T
Wed Sep 18, 2024 4:32 pm
FS TILLOTSON CARBURETORS (SOLD)

Last post by Mark Chaffin « Wed Sep 18, 2024 4:09 pm
Replies: 1
by Mark Chaffin » Wed Sep 18, 2024 2:07 pm

First post

Three Tillotson carburetors for rebuilding. These work great on a speedster! Get all three for $45 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240918_093438.jpg

Last post

Carbs have been sold.

1 Replies

477 Views

Last post by Mark Chaffin
Wed Sep 18, 2024 4:09 pm
Now shipping Full Flow Float Valves™ for 2024 touring season - SOLD OUT

Last post by Scott_Conger « Wed Sep 18, 2024 3:00 pm
Replies: 10
by Scott_Conger » Fri Mar 15, 2024 5:36 pm

First post

Why strangle your car with modern INCORRECTLY MADE float valves
standard vs full flow.jpg

Do my valves work? Ask the guy who just passed you on that last long hill...
Full Flow Float Valves in Process.jpg Full Flow Float Valves.gif

For info EMAIL ME DIRECTLY

I don't monitor ads closely particularly after it sinks out of view, so EMAIL ME...

Last post

2024 production almost all gone - just a few left

no production during winter - next batch will show up around March '25

Thank you

10 Replies

3975 Views

Last post by Scott_Conger
Wed Sep 18, 2024 3:00 pm
Horn EA Model F 6v 4restore

Last post by RVA23T « Wed Sep 18, 2024 2:38 pm
Replies: 2
by RVA23T » Mon Sep 16, 2024 2:29 pm

First post

Needs restoration, As pictured, $20 INCLUDING continental US domestic shipping 20240916_141657.jpg
20240916_141743.jpg 20240916_141647.jpg

Last post

$20 Total, domestic US shipping included.

2 Replies

648 Views

Last post by RVA23T
Wed Sep 18, 2024 2:38 pm
FS TON TRUCK STAKE BED BRACKETS (SOLD)

Last post by Mark Chaffin « Wed Sep 18, 2024 2:15 pm
Replies: 1
by Mark Chaffin » Wed Sep 18, 2024 2:06 pm

First post

An assortment of Ton Truck stake bed brackets $35 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240918_083142.jpg

Last post

Going to Rick.

1 Replies

477 Views

Last post by Mark Chaffin
Wed Sep 18, 2024 2:15 pm
FS SPRING WRAP PROTECTORS (SOLD)

Last post by Mark Chaffin « Wed Sep 18, 2024 2:14 pm
Replies: 2
by Mark Chaffin » Wed Sep 18, 2024 2:02 pm

First post

Got these from a recent estate sale. SHELDON Spring Protectors. Great for display or use. There are nine sets. Get the entire lot for $25.00 plus $18.50 Domestic USPO Flat Rate shipping. Mark Chaffin (951) 805-0928 SOLD

20240918_084705.jpg

20240918_084653.jpg

Last post

Going to Ed.

2 Replies

653 Views

Last post by Mark Chaffin
Wed Sep 18, 2024 2:14 pm
FS 11 TOOTH PINION (SOLD)

Last post by Mark Chaffin « Wed Sep 18, 2024 1:17 pm
Replies: 3
by Mark Chaffin » Mon Sep 16, 2024 5:01 pm

First post

One 11 tooth pinion in very good condition $75 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240830_112405.jpg

Last post

Going to Ken.

3 Replies

789 Views

Last post by Mark Chaffin
Wed Sep 18, 2024 1:17 pm
Wanted: Leon Parker plans for 23-25 Touring

Last post by JRSpada4 « Wed Sep 18, 2024 4:45 am
Replies: 4
by JRSpada4 » Mon Sep 16, 2024 12:26 pm

First post

If anyone has a set of Leon Parker’s plans for a 1924 Touring, I need a set. Either an original full set or full-size photocopies.

Last post

Tad,

I’d really appreciate it. Thank you.

4 Replies

1068 Views

Last post by JRSpada4
Wed Sep 18, 2024 4:45 am
Frontenac Engine *With Title*

Last post by Fordnut « Tue Sep 17, 2024 8:16 pm
Replies: 3
by Stephen1915 » Tue Sep 17, 2024 1:23 am

First post

1926 Model T Ford Engine. With Matching Title.
Equipped with a very nice Frontenac head, Exhaust Manifold, Original Frontenac Valve cover and Stromberg Carb. This engine comes with a current Missouri title that matches the engine block. I have had this engine running in a car earlier this year. Video of engine running and additional photos...

Last post

Contact info sent

3 Replies

1683 Views

Last post by Fordnut
Tue Sep 17, 2024 8:16 pm
FS HEADLAMP BURNERS NOS (SOLD)

Last post by Mark Chaffin « Tue Sep 17, 2024 3:58 pm
Replies: 2
by Mark Chaffin » Mon Sep 16, 2024 5:19 pm

First post

Two gas headlamp burners NOS. Unobtanium. Price for the pair is $100 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240916_141332 (1).jpg

Last post

Going to Mike.

2 Replies

670 Views

Last post by Mark Chaffin
Tue Sep 17, 2024 3:58 pm
FS oil pan support brackets

Last post by KimDobbins « Tue Sep 17, 2024 2:58 pm
Replies: 2
by KimDobbins » Sat Sep 14, 2024 7:09 pm

First post

2 different kinds of oil pan support brackets. $125.00 for each plus shipping. kdmks AT att.net.

Last post

The lower gray one is sold.

2 Replies

879 Views

Last post by KimDobbins
Tue Sep 17, 2024 2:58 pm
WTB: Splitdorf Magneto Distributor Cover

Last post by desertexplorer « Tue Sep 17, 2024 12:11 pm
Replies: 2
by desertexplorer » Thu Sep 12, 2024 5:55 pm

First post

Looking for a Splitdorf model D magneto distributor cover/cap like in the photos. The mag I have it is missing it.

Thanks!

Last post

Sent a PM to Tom, thanks Dan!

Still looking

2 Replies

772 Views

Last post by desertexplorer
Tue Sep 17, 2024 12:11 pm
SPOKEN FOR - FANCY BRASS AND BLACK COMBO S T O P AND TAIL LIGHT IN GORGEOUS MINT CONDITION!

Last post by Bill Everett « Tue Sep 17, 2024 10:35 am
Replies: 3
by Jay In Northern Ca. » Fri Sep 13, 2024 10:22 pm

First post

This professionally restored Tail light has been in our display case since the early 1990's. It's in like new condition and ready to mount on your T. Asking $325 plus postage. You would be hard pressed to find a nicer one!
STOP light 1.jpg STOP light 2.jpg

Please use this email address below and NOT the personal messaging system to contact me....

Last post

E-mail sent.

3 Replies

1259 Views

Last post by Bill Everett
Tue Sep 17, 2024 10:35 am
26-7 gas coupe gas tank

Last post by TFan « Mon Sep 16, 2024 11:04 pm
Replies: 2
by Joe Bell » Mon Sep 16, 2024 6:55 pm

First post

I am in the search for a 26-7 gas tank, I have never followed them so do not know what to expect to pay for one? Thanks Joe

Last post

Joe sent you an email. Jim

2 Replies

818 Views

Last post by TFan
Mon Sep 16, 2024 11:04 pm
Looking to buy 26 27 tudor driver seat frame

Last post by Ahvaldez « Mon Sep 16, 2024 10:05 pm

by Ahvaldez » Mon Sep 16, 2024 10:05 pm

Looking for 26 27 tudor sedan front seat frames any help is appreciated

0 Replies

836 Views

Last post by Ahvaldez
Mon Sep 16, 2024 10:05 pm
WTB: 1917-1922 Upholstery End Cap

Last post by Mark Chaffin « Mon Sep 16, 2024 8:16 pm
Replies: 1
by adam13 » Mon Sep 16, 2024 8:08 pm

First post

Want to buy 1 upholstery end cap pictured below for a roadster body that I am trying to keep all original sheet metal on. Thanks, AJ Eyre.

Last post

I think I have some. I'll check tomorrow.

1 Replies

445 Views

Last post by Mark Chaffin
Mon Sep 16, 2024 8:16 pm
FS SPRING PERCH SET (SOLD)

Last post by Mark Chaffin « Mon Sep 16, 2024 5:31 pm
Replies: 2
by Mark Chaffin » Mon Sep 16, 2024 5:04 pm

First post

Nice spring perch set with good threads $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240618_095419.jpg

Last post

Going to Brian. :)

2 Replies

546 Views

Last post by Mark Chaffin
Mon Sep 16, 2024 5:31 pm
FOR SALE - MODEL T ERA TIRE FILLER AND TOOL LOT

Last post by Bill Anziani « Mon Sep 16, 2024 5:19 pm
Replies: 1
by Jay In Northern Ca. » Mon Sep 16, 2024 1:39 pm

First post

Kellogg in line tire pump gauge, Schrader tire pump filler ends one with lock and one without, Tire tube stem 4 in one and three in one tools, and four metal valve stem caps. Asking $30 for the lot plus postage.
I.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

Email sent

1 Replies

680 Views

Last post by Bill Anziani
Mon Sep 16, 2024 5:19 pm
FS ACCESSORY OILER

Last post by Mark Chaffin « Mon Sep 16, 2024 5:05 pm

by Mark Chaffin » Mon Sep 16, 2024 5:05 pm

Accessory oiler set for the three dip pan $30.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240620_100309.jpg

0 Replies

994 Views

Last post by Mark Chaffin
Mon Sep 16, 2024 5:05 pm
FS STEERING PITMAN ARM

Last post by Mark Chaffin « Mon Sep 16, 2024 5:02 pm

by Mark Chaffin » Mon Sep 16, 2024 5:02 pm

One steering pitman arm in very good condition $35.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240618_095303.jpg

0 Replies

860 Views

Last post by Mark Chaffin
Mon Sep 16, 2024 5:02 pm
FS REAR AXLE DIFFERENTIAL (SOLD)

Last post by Mark Chaffin « Mon Sep 16, 2024 4:41 pm
Replies: 1
by Mark Chaffin » Mon Sep 16, 2024 4:01 pm

First post

Rear axle differential complete in very good condition. Why go to the effort and expense of tearing apart many rear axles in hopes of finding a good differential. This one is ready to go! Price is $175 plus domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240916_124446.jpg

20240916_124515.jpg

20240916_124733.jpg

Last post

Differential has been sold. Thank you MTFCA. :)

1 Replies

548 Views

Last post by Mark Chaffin
Mon Sep 16, 2024 4:41 pm
FS GAS TANK BRACKET SET (OVAL)

Last post by Mark Chaffin « Mon Sep 16, 2024 4:05 pm

by Mark Chaffin » Mon Sep 16, 2024 4:05 pm

Gas tank bracket set for the oval gas tank $30.00 plus domestic shipping. Mark Chaffin (951) 805-0928

20240718_133623.jpg

0 Replies

808 Views

Last post by Mark Chaffin
Mon Sep 16, 2024 4:05 pm
Looking for complete top for 1927 roadster

Last post by elliott1936 « Mon Sep 16, 2024 3:36 pm

by elliott1936 » Mon Sep 16, 2024 3:36 pm

I,m looking at a 1927 model T roadster that has no top. I wondering what are the chances of finding a complete top for this car? I hope to find something close to the Portland area. Tom 50three 644-937four

0 Replies

789 Views

Last post by elliott1936
Mon Sep 16, 2024 3:36 pm
WTB - Fun Projects Ammeter

Last post by Hudson29 « Mon Sep 16, 2024 2:18 pm

by Hudson29 » Mon Sep 16, 2024 2:18 pm

I have a project in mind that could use one of these. Has anyone got a spare to sell?

Paul

0 Replies

926 Views

Last post by Hudson29
Mon Sep 16, 2024 2:18 pm
Stromberg LF for parts - not for restoration -SOLD

Last post by Scott_Conger « Mon Sep 16, 2024 1:35 pm

by Scott_Conger » Mon Sep 16, 2024 1:35 pm

Use this as a lesson how to terminate an ad WITHOUT BUMPING EVERYONE ELSE'S STUFF DOWN THE LIST.

Junk carb - not reasonably a rebuild candidate...it is a donor carb

no float cover nut
no float
no float valve needle
no choke wire securing screw
modified mixture needle
pictures are the best description

despite the obvious problems, there remain a...

0 Replies

1124 Views

Last post by Scott_Conger
Mon Sep 16, 2024 1:35 pm
WTB one wood coil.

Last post by J1MGOLDEN « Mon Sep 16, 2024 12:49 pm
Replies: 6
by Tim D » Tue Jul 02, 2024 11:06 am

First post

WTB one rebuilt wood coil or one that just needs a cap. In Wisconsin. Thanks

Last post

Another give away for the coil is whether the slide off side has two small nails to hold it in place or a staple.

The ones with the nails have Ford at the top or perhaps if older, in the center of the other side.

I have found coils that make sparks on the Hand Crank Coil Tester with no sparks showing on the StroboSpark Coil Tester.

They always...

6 Replies

1519 Views

Last post by J1MGOLDEN
Mon Sep 16, 2024 12:49 pm
4 Wood Felloe Model T wheels

Last post by phaeton 15 « Mon Sep 16, 2024 10:38 am

by phaeton 15 » Mon Sep 16, 2024 10:38 am

4 Wood Felloe Model T wheels- Good Condition, clincher edges straight, takes 30X3 tire and tube, wheel plate plain, $600 or make offer jferguson27@austin.rr.com 100_3301.JPG 100_3298.JPG 100_3299.JPG

0 Replies

963 Views

Last post by phaeton 15
Mon Sep 16, 2024 10:38 am
Looking to buy 26 27 tudor driver seat frame

Last post by Ahvaldez « Sun Sep 15, 2024 10:26 pm
Replies: 2
by Ahvaldez » Sun Sep 15, 2024 7:52 pm

First post

Looking to buy 26 27 tudor driver seat frame any help is appreciated

Last post

Nope need the seat frames unfortunately the previous owner installed ford ranger seats

2 Replies

603 Views

Last post by Ahvaldez
Sun Sep 15, 2024 10:26 pm
FS Hutchins A-OOO-GAH Horn 6V

Last post by Colin McCallum « Sun Sep 15, 2024 10:05 pm
Replies: 2
by jamesb » Sat Sep 14, 2024 6:50 pm

First post

6V Hutchins A-OOO-GAH horn. Needs restoration I tested this on a battery and while the motor does spin, it does not make the horn sound. $40 plus shipping or pickup in Burbank, CA
PXL_20240914_224028244.jpg PXL_20240914_224022421.jpg PXL_20240914_224016841.jpg PXL_20240914_224007098.jpg

Last post

I would like to buy this.

2 Replies

587 Views

Last post by Colin McCallum
Sun Sep 15, 2024 10:05 pm
WTB…..Milt Webbs book

Last post by WorldChamp1914 « Sun Sep 15, 2024 8:12 pm
Replies: 5
by WorldChamp1914 » Fri Sep 06, 2024 2:00 pm

First post

A friend of mine who is new to Model T-s could benefit from Milt Webbs book………I can’t find one on EBay for him…..Thanks!

Last post

Didn’t he sell a ruckstell repair book?

5 Replies

1358 Views

Last post by WorldChamp1914
Sun Sep 15, 2024 8:12 pm
FS 1914 model T sales catalog

Last post by KimDobbins « Sun Sep 15, 2024 6:39 pm
Replies: 2
by KimDobbins » Sun Sep 15, 2024 2:18 pm

First post

Nice original January 1914 sales catalog. Has a water stain in lower corner. It has the notice of speedometers being available. $100 plus $10 shipping. kdmks AT .att.net.

Last post

Sold to Scott.

2 Replies

736 Views

Last post by KimDobbins
Sun Sep 15, 2024 6:39 pm
WTB ignition coils for T

Last post by Tparts « Sun Sep 15, 2024 4:50 pm
Replies: 1
by Kajtek1 » Sun Sep 15, 2024 11:44 am

First post

Need to be tested.

Last post

I have a number of brass top coils( tested ) available for $15.00 each plus shipping. Also black plastic coils for $10.00 each plus shipping.
Lang’s Old Car Parts Inc 1-800-872-7871

1 Replies

577 Views

Last post by Tparts
Sun Sep 15, 2024 4:50 pm
SPOKEN FOR - DO RAY CATAPHOTE - 260 CATEYE REFLECTOR SET

Last post by Speedsterguy2 « Sun Sep 15, 2024 3:32 pm
Replies: 1
by Jay In Northern Ca. » Sat Sep 14, 2024 7:14 pm

First post

Lenses are in great condition and are three inches in diameter. One is in primmer. Asking $55 for the pair plus small flat rate postage.
DORAY CATAPHOTE - 260 CATEYE REFLECTOR SET front.jpg DORAY CATAPHOTE - 260 CATEYE REFLECTOR SET back.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

I will take the Do Ray reflectors, pair. Sending an email. Thx / Tim

1 Replies

664 Views

Last post by Speedsterguy2
Sun Sep 15, 2024 3:32 pm
FS magneto coil winder

Last post by KimDobbins « Sun Sep 15, 2024 2:07 pm

by KimDobbins » Sun Sep 15, 2024 2:07 pm

Home made mag coil winder. $25.00 plus shipping. kdmks AT att.net.

0 Replies

1095 Views

Last post by KimDobbins
Sun Sep 15, 2024 2:07 pm
Parts for sale

Last post by Grntea « Sun Sep 15, 2024 12:22 pm
Replies: 13
by KimDobbins » Sat Sep 14, 2024 6:25 pm

First post

Stewart 26 speedo, for parts. $35.00. 1909-10 fine thread tie rod end, $35.00. 1913-14 side light bracket, $15.00. New repo brass radiator neck, $35.00. Valve cover door, $5.00. 4 body brackets, $10.00 for all. Original 1909-10 rear muffler end, $25.00. new repo 1911-14 muffler curved tail pipe, $20.00. 2 brass sediment bulbs, $25.00 for all....

Last post

I would like the tail light bracket!

13 Replies

2558 Views

Last post by Grntea
Sun Sep 15, 2024 12:22 pm
FS NOS crank handle

Last post by KimDobbins « Sun Sep 15, 2024 11:37 am
Replies: 2
by KimDobbins » Sat Sep 14, 2024 6:42 pm

First post

NOS crank handle spring and bushing. $75.00 plus shipping. kdmks AT att.net.

Last post

Sold to Tom

2 Replies

891 Views

Last post by KimDobbins
Sun Sep 15, 2024 11:37 am
WTB 1923-25 RH Roadster quarter panel

Last post by ModelTRoadster « Sun Sep 15, 2024 11:03 am
Replies: 1
by micshotrodgarage » Thu Sep 12, 2024 11:58 am

First post

WTB RH quarter panel for a 1923-25 Roadster, If you might have the panel behind the door, this is what I am needing. Please let me know if anyone has one in their pile of T parts. Thanks...Mike

Last post

I do have one of those, if you would call me rather than email, it’s easier for me, i’m bad at email. my cell is 585-738-1988.
thank you,
Tom Stewart
Churchville, NY

1 Replies

756 Views

Last post by ModelTRoadster
Sun Sep 15, 2024 11:03 am
NO LONGER NEEDED ! - WANTED TO PURCHASE - STEERING GEAR CUP 1926 COUPE

Last post by lirogo27 « Sun Sep 15, 2024 10:51 am

by lirogo27 » Sun Sep 15, 2024 10:51 am

I am located in California. Willing to pick up locally if necessary. Looking for a 1926 Steering Gear Case/Cup. If it comes with cover, I am happy to purchase as set. Thank you. Lisa - Please contact me via the forum message center if you do have these items!

0 Replies

816 Views

Last post by lirogo27
Sun Sep 15, 2024 10:51 am
SPOKEN FOR - STEERING WHEEL HORN BUTTON REPLACES THE STEERING WHEEL CENTER NUT

Last post by Jay In Northern Ca. « Sun Sep 15, 2024 9:53 am
Replies: 2
by Jay In Northern Ca. » Sat Sep 14, 2024 9:01 pm

First post

Asking $40 plus postage. APCO STEERING WHEEL NUT HORN BUTTON 2.jpg APCO STEERING WHEEL NUT HORN BUTTON 4.jpg APCO STEERING WHEEL NUT HORN BUTTON 1.jpg APCO STEERING WHEEL NUT HORN BUTTON 3.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

Thanks Alan!

2 Replies

718 Views

Last post by Jay In Northern Ca.
Sun Sep 15, 2024 9:53 am
Wanted - 1917 Shackle

Last post by Russ_Furstnow « Sun Sep 15, 2024 9:33 am

by Russ_Furstnow » Sun Sep 15, 2024 9:33 am

As I restore my 1917 Ford, I need a set of front and rear shackles. They are similar to the figure eight shackles but have no provision for an oiler. Any help is appreciated. See photo. Thanks, Russ Furstnow

0 Replies

947 Views

Last post by Russ_Furstnow
Sun Sep 15, 2024 9:33 am
SOLD 1913-Early 1915 Rubes Brass Horn

Last post by GGZ « Sat Sep 14, 2024 7:54 pm
Replies: 3
by GGZ » Fri Aug 16, 2024 4:28 pm

First post

SoId to Paul! Here is an original 1913 to early 1915 Rubes horn. It has its share of bumps and bruises. It would be good for an unrestored car or ? Take a look at the photos, you get what it is.

The price is 100.00 and it includes shipping in the USA.

Call me at: 734-730-4274 or email: motoringicons@hotmail.com

Thanks.

Last post

Sold to Paul!

3 Replies

1827 Views

Last post by GGZ
Sat Sep 14, 2024 7:54 pm
FS Spartonet Horn [SOLD]

Last post by jamesb « Sat Sep 14, 2024 7:27 pm
Replies: 2
by jamesb » Sat Sep 14, 2024 6:34 pm

First post

Spartonet (model F) hand operated horn. The horn does work and appears to be complete; however, the knob / push assembly is quite loose. As a result, the push assembly will often not return to the fully extended position and requires a slight jiggle. Asking $30 plus shipping or can pick up in Burbank, CA.

PXL_20240914_221527646.jpg...

Last post

Sale pending. Thanks MTFCA.

2 Replies

659 Views

Last post by jamesb
Sat Sep 14, 2024 7:27 pm
FS MISCELLANEOUS

Last post by Mark Chaffin « Sat Sep 14, 2024 1:23 pm
Replies: 9
by Mark Chaffin » Fri Sep 13, 2024 2:55 pm

First post

An assortment of miscellaneous items as escribed below. Mark Chaffin (951) 805-0928

20240619_130538.jpg
Waterpump pulley assortment for flat and V belt. Get all three for $25.00 plus $8.50 domestic shipping.

20240814_095310.jpg
Atwater Kent Distributor Coil units. $25.00 each or get the pair for $40.00. Domestic shipping $18.50...

Last post

Wings going to Chad. :)

9 Replies

1750 Views

Last post by Mark Chaffin
Sat Sep 14, 2024 1:23 pm
WTB. Steering bracket for 'TT' Right Hand Drive.

Last post by Allan « Sat Sep 14, 2024 4:22 am
Replies: 7
by v10pdownunder » Tue Sep 03, 2024 4:36 am

First post

Part no. 3539C that attaches steering column to chassis rail. Will be made as mirror image of standard unit.
Most likely to surface in Australia, U.K., New Zealand or Argentina right hand drive markets ?
I could actually make use of 2 of them.

Last post

I found it Ian. Cast into the underside is TT 1924-B With the Ford script below and an A in a circle, most likely the maker's mark. It has only one hole, for the advance/retard rod, so will be for a generator equipped vehicle. Au$20 plus whatever the postage is.

Allan from down under.

7 Replies

1585 Views

Last post by Allan
Sat Sep 14, 2024 4:22 am
WTB carbibe generator latch handle fo Jno Brown

Last post by v10pdownunder « Fri Sep 13, 2024 11:31 pm
Replies: 3
by Don ellis » Wed Sep 11, 2024 9:48 am

First post

I lost a latch handle on the road somewhere, luckily the nut was on the running board. Does anyone have an extra?
Thanks

Last post

I've already been conversing with these people already and they tell me thismorning that they do not have the parts in their advert picture

3 Replies

867 Views

Last post by v10pdownunder
Fri Sep 13, 2024 11:31 pm
FOR SALE - MODEL T ACCESSORY STEERING CONTROL NEW OLD STOCK IN THE ORIGINAL BOX

Last post by Jay In Northern Ca. « Fri Sep 13, 2024 9:14 pm
Replies: 1
by Jay In Northern Ca. » Fri Sep 13, 2024 9:12 pm

First post

This new old stock accessory helps smooth out the steering when you hit a rut or lip in the road that grabs the steering wheel. Asking $40 plus postage.

steering control 2.jpg steering control 1.jpg steering control 3.jpg steering control 4.jpg steering control 5.jpg

Last post

steering control 6.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

1 Replies

723 Views

Last post by Jay In Northern Ca.
Fri Sep 13, 2024 9:14 pm
SPOKEN FOR -THOMAS TIMER ELEVATOR SETUP IN EXCELLECT CONDITON

Last post by Jay In Northern Ca. « Fri Sep 13, 2024 7:06 pm

by Jay In Northern Ca. » Fri Sep 13, 2024 7:06 pm

This is a much sought after timer elevator that moves any standard timer up to a easy location to get at for maintenance. The gears are in excellent condition. Comes with a new proper control rod that a friend and fellow forum member made for me from his pattern for this unit. Asking $250 plus postage.
Thomas Timer Elevator 1.jpg Thomas Timer...

0 Replies

1048 Views

Last post by Jay In Northern Ca.
Fri Sep 13, 2024 7:06 pm
SPOKEN FOR - SCHAROUN THERMOSTATIC CABURETOR MIXTURE CONTROL MINT IN THE ORIGINAL BOX!

Last post by Jay In Northern Ca. « Fri Sep 13, 2024 6:20 pm

by Jay In Northern Ca. » Fri Sep 13, 2024 6:20 pm

This is a new old stock one hundred year old accessory that will automatically adjust your carburetors mixture. It uses a bi-metallic strip like a home thermostat uses. Asking $60 plus shipping. Scharoun Carburetor control 1.jpg Scharoun Carburetor control 2.jpg Scharoun Carburetor control 3.jpg Scharoun Carburetor control 4.jpg

Please use the...

0 Replies

915 Views

Last post by Jay In Northern Ca.
Fri Sep 13, 2024 6:20 pm
WTB Model A Multiple clutch Pedal Pads

Last post by Jeepster47 « Fri Sep 13, 2024 9:11 am

by Jeepster47 » Fri Sep 13, 2024 9:11 am

Looking for a good used pedal pad assembly for a 28 with multiple disc clutch. ( goes around steering column and pedals to seal). I know they make new ones but I have an original unrestored car and new parts just stick out like a sore thumb.

0 Replies

884 Views

Last post by Jeepster47
Fri Sep 13, 2024 9:11 am
FS: Goodrich "Safety First" enamel radiator badge

Last post by blauvelt « Fri Sep 13, 2024 9:00 am
Replies: 2
by blauvelt » Fri Aug 23, 2024 6:04 pm

First post

Please see photo for size. Enamel. Good condition. $40.00 delivered lower 48.

Last post

Back to the top...

2 Replies

1408 Views

Last post by blauvelt
Fri Sep 13, 2024 9:00 am
F.S. - Brand new extra tall trailer.

Last post by Sarikatime « Fri Sep 13, 2024 6:21 am

by Sarikatime » Fri Sep 13, 2024 6:21 am

Beautiful brand new trailer that I just bought. The trailer is 7’- 6” wide by 7’- 6” tall interior by 16’ long plus the 2’ V nose. Rear door fold down, led lights, plywood interior sides and floor, silver color with screwless outside paneling. I ordered the 7’- 6” wide since I like to know what is happening behind me while towing down the road and...

0 Replies

1217 Views

Last post by Sarikatime
Fri Sep 13, 2024 6:21 am
Wanted Rajo B,BB,BBR single inlet updraft manifold with water tube

Last post by Mark Herdman « Thu Sep 12, 2024 11:54 pm

by Mark Herdman » Thu Sep 12, 2024 11:54 pm

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

0 Replies

902 Views

Last post by Mark Herdman
Thu Sep 12, 2024 11:54 pm
FS Boyco Running Board Cans w/out carrier

Last post by jamesb « Thu Sep 12, 2024 11:11 pm
Replies: 1
by jamesb » Thu Sep 12, 2024 8:03 pm

First post

Set of three Boyco running board cans (9-3/8 deep). These are in decent shape, but do note the dent in the unpainted can. $200 OBO plus shipping. Local pickup in Burbank, CA

PXL_20240912_234903324.jpg PXL_20240912_234845157.jpg PXL_20240912_235622719.jpg PXL_20240912_234927264.jpg PXL_20240912_234910925.jpg

Last post

Sale pending! Thanks MTFCA

1 Replies

705 Views

Last post by jamesb
Thu Sep 12, 2024 11:11 pm
Reproduction 1909-1912 E & J Gererator parts

Last post by dryden « Thu Sep 12, 2024 10:16 pm

by dryden » Thu Sep 12, 2024 10:16 pm

Brass top tank main ring $60
Brass bottom tank mounting brackets set of 3 $24
Locking E & J side levers set of 2 $125
Brass Thumb nuts with the brass screw good for the head lights as well as the generator set of 5 $50
Brass top tank gas tap $ 60 small amount to screw the lever in
Please email daveandjand@gmail.com

0 Replies

1040 Views

Last post by dryden
Thu Sep 12, 2024 10:16 pm
xxxxxxxxxxxxxxxxxxxxxxxxx

Last post by GGZ « Thu Sep 12, 2024 8:56 pm
Replies: 9
by GGZ » Tue May 14, 2024 6:58 pm

First post

xxxxxxxxxxxxxxxxxxxxxxxxxxx

Last post

Pxxxxxxxxxxxxxxxxxxxxxxxx

9 Replies

14804 Views

Last post by GGZ
Thu Sep 12, 2024 8:56 pm
xxxxxxxxxxxxxxxxxxxxxxxx

Last post by GGZ « Thu Sep 12, 2024 8:51 pm
Replies: 9
by GGZ » Thu Jan 25, 2024 8:13 pm

First post

xxxxxxxxxxxxxxxxxxxxxxxxxx

Last post

xxxxxxxxxxxxxxxxxxxxx

9 Replies

11142 Views

Last post by GGZ
Thu Sep 12, 2024 8:51 pm
xxxxxxxxxxxxxxxxxxxxxxxxxx

Last post by GGZ « Thu Sep 12, 2024 8:49 pm
Replies: 6
by GGZ » Wed Apr 24, 2024 2:05 pm

First post

xxxxxxxxxxxxxxxxxxxxxxxxx

Last post

xxxxxxxxxxxxxxxxxxxxxx

6 Replies

8070 Views

Last post by GGZ
Thu Sep 12, 2024 8:49 pm
New E & J Carbide Generator Mounting Brackets

Last post by dryden « Thu Sep 12, 2024 8:46 pm
Replies: 9
by dryden » Fri Sep 06, 2024 8:47 am

First post

10 new 1909-1912 E & J Carbide Generator mounting brackets, excellent reproduction $130US delivered anywhere in USA and Canada.

Last post

All the generator brackets have now been sold and sent to the buyers, Thank you everyone. I still have many generator parts for sale I will be putting another post up in regards to them

9 Replies

1878 Views

Last post by dryden
Thu Sep 12, 2024 8:46 pm
WTB - crankshaft

Last post by big2bird « Thu Sep 12, 2024 11:54 am
Replies: 4
by Gen3AntiqueAuto » Wed Sep 11, 2024 2:36 pm

First post

Looking for a stock size scat/dubats/NZ/whatever new crankshaft. Anyone hoarding? EMAIL me with a price if you do.

Last post

Have a Sure Mike?

I have a Sure Mike, too Joe. I don't think he wants a Sure Break.

I have had a Sure Mike in my touring 50 years. Just have to find a good one.

4 Replies

1515 Views

Last post by big2bird
Thu Sep 12, 2024 11:54 am
NEW Transmission Main Shafts FS

Last post by Dan Hatch « Wed Sep 11, 2024 3:42 pm
Replies: 9
by Dan Hatch » Sat Aug 03, 2024 2:36 pm

First post

I have some new transmission main shafts. Extra to me. Why mess with the old Ford shafts. I have not found one straight enough to use. I don’t think they were straight 100 years ago. These are. $195.00 each + shipping. Email me at address in pictures. Thanks Dan
IMG_3392.jpeg
IMG_3393.jpeg
IMG_3394.jpeg
IMG_0260.jpeg

Last post

Back to the top

9 Replies

2835 Views

Last post by Dan Hatch
Wed Sep 11, 2024 3:42 pm
Item no longer available.

Last post by YoungTDave! « Wed Sep 11, 2024 2:35 pm
Replies: 6
by Adam » Wed Mar 09, 2022 10:20 am

First post

Item no longer available.

Last post

Did you ever sell?

6 Replies

2389 Views

Last post by YoungTDave!
Wed Sep 11, 2024 2:35 pm
23/25 touring top irons

Last post by YoungTDave! « Wed Sep 11, 2024 2:33 pm
Replies: 3
by Racer_22 » Mon May 01, 2023 7:57 pm

First post

I have a set of new reproduction 23-25 one man top irons for sale. Never bin mounted on the car. These are the ones the dealers sold before they were discontinued in about 2019. Price $1,600.00 plus actual shipping. Prus, three three 0-77four-71three0. kprus@zoominternet.net

Last post

Do you still have?

3 Replies

1483 Views

Last post by YoungTDave!
Wed Sep 11, 2024 2:33 pm
26-7 shortblock

Last post by Joe Bell « Wed Sep 11, 2024 2:06 pm

by Joe Bell » Wed Sep 11, 2024 2:06 pm

Have a 26-7 short block .060 over pistons, .020 under rods, .030 under mains, hardened seats, s.s steel valves, adjustable tappets, aluminum timing gear, pre hershey price 2000. at hershey it will be 2500. Tiffin Ohio 419-618-1025 Joe, Thanks!

0 Replies

1088 Views

Last post by Joe Bell
Wed Sep 11, 2024 2:06 pm
FS storage jacks

Last post by Karl Von Neumann « Wed Sep 11, 2024 1:49 pm
Replies: 1
by Karl Von Neumann » Wed Sep 11, 2024 1:48 pm

First post

Storage jacks one set of 3 on pair and a few singles some have issues 40$ each plus the ride

Last post

More pictures

1 Replies

719 Views

Last post by Karl Von Neumann
Wed Sep 11, 2024 1:49 pm
Kingston carb

Last post by Melba Nolan « Tue Sep 10, 2024 11:31 pm
Replies: 7
by Melba Nolan » Sun Sep 24, 2023 6:31 pm

First post

For sale: Kingston Model L4 carb $75 plus postage

20220608_204720.jpg

Last post

move to top

7 Replies

1642 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:31 pm
burner cone NEW PRICE

Last post by Melba Nolan « Tue Sep 10, 2024 11:30 pm
Replies: 9
by Melba Nolan » Sat Dec 02, 2023 7:25 pm

First post

For sale: new never used large Burner Cones. $20 each plus postage.

email: melbanolan@aol.com
text: 314-575-7115

Last post

move to top

9 Replies

2114 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:30 pm
outlet water pipe new

Last post by Melba Nolan « Tue Sep 10, 2024 11:29 pm
Replies: 5
by Melba Nolan » Sun Feb 19, 2023 10:12 am

First post

for sale: outlet connection pipe, for water pump 10 3/4 $5 plus postage new

melbanolan@aol.com 314-575-7115

Last post

move to top

5 Replies

1549 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:29 pm
locking foot pedal

Last post by Melba Nolan « Tue Sep 10, 2024 11:18 pm
Replies: 5
by Melba Nolan » Mon Feb 05, 2024 8:32 pm

First post

for sale: locking foot pedal for exhaust whistle $10 plus postage

pictures........melbanolan@aol.com or 314-575-7115

Last post

move to top

5 Replies

2061 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:18 pm
Swap meet

Last post by Melba Nolan « Tue Sep 10, 2024 11:12 pm

by Melba Nolan » Tue Sep 10, 2024 11:12 pm

Reminder that Horseless Carriage Club of Missouri will be having their 45th Annual Swap Meet and Car Show. gates open at 6:30 at the Fox Service Center 849 Jeffco Blvd. Arnold, Mo.

0 Replies

993 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:12 pm
SOLD Robe rail

Last post by Karl Von Neumann « Tue Sep 10, 2024 2:36 pm
Replies: 4
by Karl Von Neumann » Sat Apr 27, 2024 9:42 pm

First post

For sale Robe rail for rebuild the end are nice one got a big gouge froma saw or cut off wheel at some point t the brass hardware seems to be taped to it the pipe is so broken ill cut it off 100$ shipp lower 48 not sure what years used this specifically

Sold sold sold

Last post

Move to top

4 Replies

1518 Views

Last post by Karl Von Neumann
Tue Sep 10, 2024 2:36 pm
Ignition parts at Hershey

Last post by Tom VanMeeteren « Tue Sep 10, 2024 1:59 pm
Replies: 2
by Tom VanMeeteren » Mon Sep 09, 2024 9:43 pm

First post

We will be at Hershey again this year with a lot of parts for the various add on distributors that were used on the model T. Find us at C4N 31 -32

Tom

Last post

Yes, I will have gears too. However, I am a little lite on gears for the Ford units. Other makes and models - no problem

2 Replies

968 Views

Last post by Tom VanMeeteren
Tue Sep 10, 2024 1:59 pm
SOLD 13 14 carbide generator 4 parts

Last post by JTT3 « Tue Sep 10, 2024 1:41 pm
Replies: 2
by Karl Von Neumann » Tue Sep 10, 2024 12:33 pm

First post

13 14 carbide generator for parts of restoration complete but beat has rust issues along the bottom of the water tank and base of the unit. 200$ shipped in the lower 48

Last post

Sent you an email with question.

2 Replies

794 Views

Last post by JTT3
Tue Sep 10, 2024 1:41 pm
FS - 1 Step plate - Sold

Last post by South Park Zephyr « Tue Sep 10, 2024 1:34 pm
Replies: 3
by TheSaintDiscJockey » Fri Sep 06, 2024 8:48 am

First post

One aluminum step plate.
Comes with hardware.
Just install.

15.00 plus shipping.

Please text Brooks @ six zero 9,
9 two 0, 4 2 two zero.

Many thanks!

Last post

It arrived today,

Thanks,
Scott

3 Replies

1105 Views

Last post by South Park Zephyr
Tue Sep 10, 2024 1:34 pm
SOLD 26/27 running boards

Last post by Shannon_in_Texas « Tue Sep 10, 2024 9:43 am
Replies: 1
by fordrelic » Mon Sep 09, 2024 9:03 pm

First post

For Sale a good set of 26/27 running boards.
Ford Script both sizes ,Made in USA.

$175 plus shipping

Thanks,
Clay

26 running boards.jpg 26 running boards 2.jpg

Last post

Clay, I sent you an email/PM. Thanks!

1 Replies

707 Views

Last post by Shannon_in_Texas
Tue Sep 10, 2024 9:43 am
retirement sale

Last post by 23ford « Mon Sep 09, 2024 3:55 pm
Replies: 8
by 23ford » Mon Aug 19, 2024 3:12 am

First post

I am selling the parts storehouse of my dad and grandpa. As I get stuff out and sorted I will take pictures and list here.
First items are a rain topper for seventeen to twenty one goes at top of wood firewall $45
3 nice steering wheels with metal spyders and bakealike rims $39 each
double Flair tool with box $35
3 piece vacuum grip miniature...

Last post

Still for sale

8 Replies

3439 Views

Last post by 23ford
Mon Sep 09, 2024 3:55 pm
FS 1909-10 hub caps

Last post by KimDobbins « Mon Sep 09, 2024 12:43 pm
Replies: 5
by KimDobbins » Sun Sep 08, 2024 4:05 pm

First post

I have 10 original 1909-10 hubcap for sale. Not perfect but still very good. $40 each. Plus shipping. Kdmks AT att.net.

Last post

Sorry, no 12 hubcaps.

5 Replies

1260 Views

Last post by KimDobbins
Mon Sep 09, 2024 12:43 pm
F-S KW SWITCH

Last post by John iaccino « Mon Sep 09, 2024 9:51 am
Replies: 8
by John iaccino » Mon Jul 08, 2024 9:36 am

First post

KW switch. Works, key does not withdraw from switch. Fits Master Vibrator and 1913 coil box. Needs coil box front plate. $85 plus flat rate shipping.
USA only.

Last post

Please re-post

8 Replies

2412 Views

Last post by John iaccino
Mon Sep 09, 2024 9:51 am
F-S ACCESSORY TIRE IRON AND WHEEL LUG WRENCH

Last post by John iaccino « Mon Sep 09, 2024 9:51 am
Replies: 4
by John iaccino » Sat Jul 27, 2024 3:56 pm

First post

Accessory tire irons and wheel lug wrenches from a garage in Ashokan, NY. Also fits head bolts. Surface rust only. On has sticky surface from being taped. Rare, hard to find. $50 pair plus shipping. USA only.

Last post

Please re-post

4 Replies

2562 Views

Last post by John iaccino
Mon Sep 09, 2024 9:51 am
F-S RE-BUILT 6 VOLT STARTER

Last post by John iaccino « Mon Sep 09, 2024 9:50 am
Replies: 4
by John iaccino » Tue Aug 13, 2024 6:48 am

First post

Re-built 6 volt starter for sale. Bought in Carlisle as rebuilt and never used. I no longer have need for it and will sell it for what I paid. Will add picture later today. $275 plus shipping. USA only.

Last post

Please re-post

4 Replies

1537 Views

Last post by John iaccino
Mon Sep 09, 2024 9:50 am

New Topic

9711 topics

Page 32 of 98
- Jump to page:
Previous
1
…
30
31
32
33
34
…
98
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum