Classifieds - Parts - Page 36

Classifieds - Parts

New Topic

10457 topics

Page 36 of 105
- Jump to page:
Previous
1
…
34
35
36
37
38
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

84091 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Stromberg OF float needed

Last post by Allan « Thu Nov 14, 2024 12:03 am
Replies: 3
by Bruce Compton » Tue Nov 12, 2024 6:46 pm

First post

Anyone out there with a spare Stromberg OF float (actually 99% of the brass Strombergs use the same float). I could sure use one, or two. Thanks : Bruce

Last post

I'll put them aside when I get to the swap meet

Allan from down under.

3 Replies

810 Views

Last post by Allan
Thu Nov 14, 2024 12:03 am
Wood wheel assemblies FS

Last post by Wingnut « Wed Nov 13, 2024 9:40 pm
Replies: 6
by Wingnut » Tue Nov 05, 2024 11:12 am

First post

Up for your consideration are a set of four wood wheels, rims, made in USA Firestones 4.40/4.50 X 21 . The steer wheel hubs have good bearings, I switched to wires on the '26 and put all new on, these were on the road just last week no issues noted. Tires have approx. 4-6/32 left. wheels are finished natural and were not rebuilt. I'm starting at...

Last post

Wheels are sold, thanks MTFCA!

6 Replies

1887 Views

Last post by Wingnut
Wed Nov 13, 2024 9:40 pm
Original Brass Schrader tire valve covers / dust caps

Last post by KiwiFordGuy « Wed Nov 13, 2024 9:15 pm
Replies: 7
by KiwiFordGuy » Fri Nov 08, 2024 5:33 am

First post

A very nice set of original Schrader brass era valve covers as pictured. $220 USD including freight.

PayPal friends and family.

Please private message if interested

Thanks

Last post

To anyone interested, send me a sensible offer via private message.

7 Replies

1458 Views

Last post by KiwiFordGuy
Wed Nov 13, 2024 9:15 pm
Schrader Kwik On and Off valve stem covers F/S

Last post by Grntea « Wed Nov 13, 2024 7:50 pm
Replies: 1
by Layden Butler » Wed Nov 13, 2024 1:50 pm

First post

4 matching cover pieces in nice shape $45 including domestic shipping.

Last post

Email sent

1 Replies

683 Views

Last post by Grntea
Wed Nov 13, 2024 7:50 pm
Starter Field Pole screw remover FS? SOLD

Last post by Dan Hatch « Wed Nov 13, 2024 1:05 pm
Replies: 6
by Dan Hatch » Sun Nov 10, 2024 11:33 am

First post

Cleaning out shop. Any interest in this power pole screwdriver?
Do not think it is homemade, I got it years ago from a closed starter shop. No name on it, but looks too professional to be made in a home shop. Email me at address in pictures. Thanks Dan.
IMG_4095.jpeg
IMG_4099.jpeg
IMG_4098.jpeg
IMG_4100.jpeg
IMG_0260.jpeg

Last post

Sold sold sold.

6 Replies

1556 Views

Last post by Dan Hatch
Wed Nov 13, 2024 1:05 pm
FS 23-25 stanchions $125 nice

Last post by fordrelic « Wed Nov 13, 2024 9:44 am
Replies: 5
by fordrelic » Fri Sep 20, 2024 7:19 pm

First post

For Sale: a nice smooth set of 23-25 stanchions.

$150 plus shipping

Thanks

T stanchions.jpg T stanchions 2.jpg

Last post

Lowered price to $125 plus shipping.
Nice pair of stanchions.

5 Replies

1485 Views

Last post by fordrelic
Wed Nov 13, 2024 9:44 am
Firestone 30x3 1/2 Rim F/S

Last post by Allan « Wed Nov 13, 2024 12:52 am
Replies: 2
by Layden Butler » Sun Oct 27, 2024 10:42 pm

First post

This Firestone 30 x 3 1/2 clincher rim was used by Ford as part of production during 1922 and 1923. Good solid not sharp or dented rim. $65, packaging included, shipping at cost from Northern California.

Last post

With that boss around the valve stem hole ground off, these are perfect for rebuilding into wood felloe T wheels.
Cheap at that price.
Allan from down under.

2 Replies

1154 Views

Last post by Allan
Wed Nov 13, 2024 12:52 am
Rebuilt Fronty OHV /HP5A Zenith

Last post by Eric Edwards « Wed Nov 13, 2024 12:16 am

by Eric Edwards » Wed Nov 13, 2024 12:16 am

Rebuilt Fronty OHV with 428 valves
Machined , reseated and decked
New rocker train and New Frontenac rocker cover and side plate with the holy grail of Speedster carbs. The Zenith HP5A.
Carb has not been rebuilt but complete and unmolested. Will not separate. $4250
Images available ships from NY state
Eric Edwards 705 828 5405.

0 Replies

1335 Views

Last post by Eric Edwards
Wed Nov 13, 2024 12:16 am
1909-12 Double twist Brass horns

Last post by Eric Edwards « Wed Nov 13, 2024 12:04 am

by Eric Edwards » Wed Nov 13, 2024 12:04 am

About 20 years ago i had 100 double twist horns for left drive ( North American use) car. They are suitable for medium to
Large cars as well as Model T Ford
$400 USD includes post sbd insurance to the lower 48 states and Cavada.
Eric Edwards 705 828 5405. Pics available

0 Replies

1227 Views

Last post by Eric Edwards
Wed Nov 13, 2024 12:04 am
1909-10 front seat top pivots

Last post by Eric Edwards « Tue Nov 12, 2024 11:56 pm

by Eric Edwards » Tue Nov 12, 2024 11:56 pm

Nice pair original front top iron pivots
$50 post included. To lower 48 and Canada
Eric Edwards. 705 828 5405

0 Replies

1171 Views

Last post by Eric Edwards
Tue Nov 12, 2024 11:56 pm
WTB Top 3" of 24-27 Open Car Windshield Stanchion

Last post by Howard Tomlinson « Tue Nov 12, 2024 6:47 pm
Replies: 2
by Howard Tomlinson » Mon Nov 11, 2024 7:33 pm

First post

Hello,

I am looking for the top 3 of a 24-27 Open car windshield stanchion. I'm modifying it, so I rather have one that the bottom section is busted or rusted beyond use.

Thanks,

Last post

Hello Craig,

I sent you a email.

Thanks,
Howard

2 Replies

779 Views

Last post by Howard Tomlinson
Tue Nov 12, 2024 6:47 pm
T misc. Assortment

Last post by Model T Matt « Tue Nov 12, 2024 3:39 pm
Replies: 1
by Model T Matt » Tue Nov 12, 2024 3:25 pm

First post

Water Bag - 11-14 Model T New crank Handle - Two Ford wrenches - 4 different steering wheel brass nuts -amp meter and Two Books all for $60.00 shipped to your Location call Matt 503-eight 2 four - two 6 8 one

Last post

Sold Thanks Richard

1 Replies

751 Views

Last post by Model T Matt
Tue Nov 12, 2024 3:39 pm
Gas Headlamp Burners SOLD

Last post by Layden Butler « Tue Nov 12, 2024 2:09 pm

by Layden Butler » Tue Nov 12, 2024 2:09 pm

Pair of very lightly used original burner tips remember that these are no longer being made and are not available in catalogs.

0 Replies

1023 Views

Last post by Layden Butler
Tue Nov 12, 2024 2:09 pm
Sold: Brass Repop 1911 Rear Top Socket Mounts

Last post by Rodger Erickson « Tue Nov 12, 2024 1:38 pm
Replies: 2
by Rodger Erickson » Mon Nov 11, 2024 12:56 pm

First post

FS: 3 pcs. Reproduction Top bow socket to body bracket arms for 1911 Touring, made of cast brass, $10 each. Reproduction Top prop nuts cast in brass, $5 each. Buyer pays shipping.

t11tpi01.jpg

prpnt01.jpg

Thanks for looking!

Last post

Email sent...

2 Replies

682 Views

Last post by Rodger Erickson
Tue Nov 12, 2024 1:38 pm
FS Brass Dog Bone Motormeter SOLD

Last post by 25tfire « Tue Nov 12, 2024 10:22 am
Replies: 1
by 25tfire » Wed Oct 30, 2024 1:16 pm

First post

in nice condition Asking $175 plus shipping from 80543 Pics are available to your text or email. SOLD

Last post

New price $100 plus shipping from 80543

1 Replies

807 Views

Last post by 25tfire
Tue Nov 12, 2024 10:22 am
Wanted: FOUND NOS or Near New Combination Switch FOUND

Last post by KimDobbins « Tue Nov 12, 2024 9:37 am
Replies: 8
by RajoRacer » Tue Nov 05, 2024 9:50 pm

First post

Anyone happen to have a combination headlamp & horn switch stashed away needing to go to a good home ?????? Needs to be completely operational.

Drop me a note through the Forum, please.

Last post

Steve, I have a nos combo switch if you still need one.

8 Replies

1930 Views

Last post by KimDobbins
Tue Nov 12, 2024 9:37 am
Spoken for: 1920 Automotive Engineering Books

Last post by Craig Leach « Mon Nov 11, 2024 11:06 pm
Replies: 2
by Rodger Erickson » Sun Nov 10, 2024 10:05 am

First post

Free: Four books from the Automotive Engineering series, c. 1920, published by the American Technical Society. Apparently from one of those Correspondence School books that were popular in the first half of the 20'th century. I have volumes I, III, IV, and V. I don't know where volume II went. Volume 1 covers engines and associated parts, 3...

Last post

Charlie probably nailed this down but if not I just donated a 1919 Seagraves text book to the Az hall of flame so I have shelf space for an other
book.
Craig.

2 Replies

1067 Views

Last post by Craig Leach
Mon Nov 11, 2024 11:06 pm
Camshaft

Last post by Craig Leach « Mon Nov 11, 2024 10:53 pm
Replies: 10
by vanco » Sat Nov 09, 2024 4:08 pm

First post

Wanted: Camshaft, new or used , or acceptable core for a regrind.

Last post

Hi John ,
If you end up with a early cam I have one shim kit left.
Craig.

10 Replies

2216 Views

Last post by Craig Leach
Mon Nov 11, 2024 10:53 pm
1909-12 New differential housings

Last post by Eric Edwards « Mon Nov 11, 2024 9:58 pm

by Eric Edwards » Mon Nov 11, 2024 9:58 pm

Last set new housings recast centres in silicon steel perfectly machined pressed into original tubes and backing plates. Satisfaction guaranteed $2750 US. 705 828 5405.
Shipped from NY state

0 Replies

1319 Views

Last post by Eric Edwards
Mon Nov 11, 2024 9:58 pm
FS 1909-10 short 54inch Steering column

Last post by Eric Edwards « Mon Nov 11, 2024 9:45 pm
Replies: 1
by Eric Edwards » Mon Nov 11, 2024 9:42 pm

First post

Rust and pit free column complete with gear case and original control rods and shaft. $850 USD plus shipping 705 828 5405. Eric

Last post

Rust and pit free column tube with original virgin gear case control rods and steering shaft complete and unmolested. $850
705 828 5405

1 Replies

907 Views

Last post by Eric Edwards
Mon Nov 11, 2024 9:45 pm
SPOKEN FOR: Pair Non-Ford Headlight Buckets

Last post by Charlie_26_TT_Ccab « Mon Nov 11, 2024 5:29 pm
Replies: 1
by Rodger Erickson » Sun Nov 10, 2024 12:29 am

First post

Free: A pair of Steel headlight buckets, missing the reflector, rim, and bulb socket, non-Ford. These will fit a Model T Fork; I'm guessing these may be aftermarket retrofits to modernize a brass-era car. Nice condition, minimal rust. They're yours just pay shipping; I need to make room for other projects.

hlbkt01.jpg

hlbkt02.jpg...

Last post

Sent you an email.

1 Replies

746 Views

Last post by Charlie_26_TT_Ccab
Mon Nov 11, 2024 5:29 pm
SOLD: 1907-1912ish Large Brass Horn

Last post by GGZ « Mon Nov 11, 2024 3:04 pm

by GGZ » Mon Nov 11, 2024 3:04 pm

SOLD !!! Here is a nice, early, large brass Horn. It is marked #175 Auto Escargot on the bell. The inlet is threaded on the inside. It has dings but it can be used on an original/older restoration automobile or it would be an ideal horn for restoration. I don't see any cracks in the brass. A heavy, well-made horn that would be appropriate from a...

0 Replies

1106 Views

Last post by GGZ
Mon Nov 11, 2024 3:04 pm
Free: Ford-O Lantern Parts w/ Unusual Bracket

Last post by Rodger Erickson « Mon Nov 11, 2024 1:11 pm

by Rodger Erickson » Mon Nov 11, 2024 1:11 pm

Free: Some rough FORD-O style steel lantern parts. This one is a little different as it has a non-Ford mounting bracket, possibly to update earlier cars or perhaps even farm wagons. The steel body is probably for the most part junk but maybe the bracket can be removed and used on another project (e.g. speedster, pie wagon, depot hack.) Pay for...

0 Replies

1086 Views

Last post by Rodger Erickson
Mon Nov 11, 2024 1:11 pm
Rebuilt Model T Ford Coils for Christmas

Last post by Ron Patterson « Mon Nov 11, 2024 10:22 am
Replies: 4
by Ron Patterson » Mon Oct 21, 2024 5:49 pm

First post

Get your favorite Model T person a set of rebuilt ignition coils for under the Christmas tree.
Rebuilt coils for 1913 to 1917 Fords (with metal coil box only).
Mexico 4 Brass Top Coils-Small.jpg
Rebuilt coils for all 1917 to 1927 Fords.
Mexico 4 wood as 2014-004 (1-small).JPG
Contact
Ron Patterson
modeltcoils at windstream dot net...

Last post

To top of list

4 Replies

1663 Views

Last post by Ron Patterson
Mon Nov 11, 2024 10:22 am
FOR SALE 1911-12 ForDoor set -up SOLD TO A NEW HOME

Last post by Burlingtontguy « Sun Nov 10, 2024 9:14 pm
Replies: 4
by Burlingtontguy » Wed Oct 16, 2024 9:33 pm

First post

i have a mint 1911-12 ForDoor set-up $600 plus shipping, send e-mail for pictures or send contact # I will call you back to answer any questions , You may have, Thanks, Dennis

Last post

Pictures go to those interested for the asking with cell phone text as add says, Thanks Dennis

4 Replies

1641 Views

Last post by Burlingtontguy
Sun Nov 10, 2024 9:14 pm
NOS Hood Shelf bolts FS

Last post by Dan Hatch « Sun Nov 10, 2024 7:15 pm
Replies: 3
by Dan Hatch » Sun Nov 10, 2024 2:15 pm

First post

Here are sets of NOS hood shelf and engine pans bolts and nuts.
These came out of a Ford dealership in Tennessee that closed in 1929. I have 5 sets. $10 each set + shipping. Email me at address in pictures.
IMG_4102.jpeg
IMG_0260.jpeg

Last post

Sold sold sold.

3 Replies

832 Views

Last post by Dan Hatch
Sun Nov 10, 2024 7:15 pm
TT Closed Cab door check straps

Last post by KenHaverhill « Sun Nov 10, 2024 11:30 am
Replies: 6
by RajoRacer » Sun Apr 07, 2024 11:48 am

First post

I've had several closed cab rigs in the shop for odds & ends repairs and not one had door check straps so I had some done up using the remnants of one using similar webbing material & the length I kinda judged by the door position. These fit original & repro footman loops. I have a limited number of pairs and am asking $25.00 for a pair including...

Last post

I will take a set should I pm you ?

6 Replies

1377 Views

Last post by KenHaverhill
Sun Nov 10, 2024 11:30 am
Brass Moto-Meter

Last post by Model T Matt « Sun Nov 10, 2024 7:58 am
Replies: 2
by Model T Matt » Sun Nov 03, 2024 2:50 pm

First post

Very Nice Moto-Meter and Radiator Neck- Asking $175.00 SHIPPED TO YOUR DOOR-CALL MATT 503-eight two four-268 one

Last post

Sold Thanks Joe

2 Replies

1022 Views

Last post by Model T Matt
Sun Nov 10, 2024 7:58 am
FS: New 21” McLaren wheels

Last post by kansasplowboy « Sat Nov 09, 2024 8:39 pm

by kansasplowboy » Sat Nov 09, 2024 8:39 pm

For sale are 5 brand new 21” drop center wheels in the raw with all hardware included. Never installed or painted.
$5k reply by email
IMG_5380.jpeg IMG_5381.jpeg

0 Replies

1222 Views

Last post by kansasplowboy
Sat Nov 09, 2024 8:39 pm
bolt remover on generator SOLD

Last post by J1MGOLDEN « Sat Nov 09, 2024 3:06 pm
Replies: 6
by Melba Nolan » Mon Nov 04, 2024 12:40 pm

First post

For sale: Holds generator to remove bolt on side. $50 plus postage

20241027_100256.jpg 20241027_100220.jpg

Last post

Dan:

You are right again, as usual.

They are both homemade, my red one cost me $100 and worked great.

6 Replies

2372 Views

Last post by J1MGOLDEN
Sat Nov 09, 2024 3:06 pm
Tools

Last post by Model T Matt « Fri Nov 08, 2024 11:08 pm
Replies: 2
by Model T Matt » Sun Nov 03, 2024 2:54 pm

First post

Nice Ford Script Oil Can with holder-Ford Pliers-Wrench all for $80.00 shipped to your door call Matt at 503-824-268 one

Last post

Sold Thanks Richard

2 Replies

1104 Views

Last post by Model T Matt
Fri Nov 08, 2024 11:08 pm
(SOLD) Heavy Duty Rear Wooden Wheel Hub Puller with Strike Pin

Last post by Scott_Conger « Fri Nov 08, 2024 7:56 pm
Replies: 1
by WaltM » Fri Nov 08, 2024 4:26 pm

First post

Puller is Sold. Thanks, Walt

Last post

email sent

1 Replies

897 Views

Last post by Scott_Conger
Fri Nov 08, 2024 7:56 pm
(SOLD) Early Accessory Warford Coupler

Last post by WaltM « Fri Nov 08, 2024 4:48 pm

by WaltM » Fri Nov 08, 2024 4:48 pm

Warford coupler is Sold. Thanks, Walt

0 Replies

1125 Views

Last post by WaltM
Fri Nov 08, 2024 4:48 pm
FS; Late Engine Block Conversion to Early Block T1769

Last post by WaltM « Fri Nov 08, 2024 4:38 pm

by WaltM » Fri Nov 08, 2024 4:38 pm

For sale early engine front cover and side cover (T1769). Converts generator engine block to non generator block. Great for speedster running side mount magneto with later engine block. Price $180 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

1257 Views

Last post by WaltM
Fri Nov 08, 2024 4:38 pm
(SOLD) APCO Accessory Oil Level Gauge and Drain Valve

Last post by WaltM « Fri Nov 08, 2024 4:18 pm

by WaltM » Fri Nov 08, 2024 4:18 pm

Oil level gauge is Sold. Thanks, Walt

0 Replies

1104 Views

Last post by WaltM
Fri Nov 08, 2024 4:18 pm
For sale engine head 1914 or later

Last post by kommandant 95 « Fri Nov 08, 2024 1:55 pm

by kommandant 95 » Fri Nov 08, 2024 1:55 pm

Engine head for sale. Taken off a running 1913 touring. After a little running turns out there was an old crack in the water jacket. Attempted JB Weld repair. Was not sufficient, repair needed. Asking $125 + shipping. Please email if interested.

0 Replies

1060 Views

Last post by kommandant 95
Fri Nov 08, 2024 1:55 pm
Ford shop coat

Last post by TeveS-Nor Cal « Fri Nov 08, 2024 1:34 pm
Replies: 7
by Grntea » Mon Nov 04, 2024 9:54 am

First post

I am very interested in getting a Ford shop coat like the one pictured below. If you have one and are not using it - I would appreciate a chance to put it to good use!

Last post

I have 2 for sale. 1 medium and 1 large. Both worn about two times- like new condition.

7 Replies

2205 Views

Last post by TeveS-Nor Cal
Fri Nov 08, 2024 1:34 pm
FOR SALE 22-25 roadster back panel corner irons

Last post by Burlingtontguy « Fri Nov 08, 2024 11:29 am
Replies: 2
by Burlingtontguy » Wed Oct 16, 2024 9:39 pm

First post

I have an Excellent pair of 22-25 roadster back panel corner irons $ 75 OBO. plus shipping e-mail for pictures or send contact# for questions and I will call you back, Thanks, Dennis

Last post

to the top

2 Replies

1000 Views

Last post by Burlingtontguy
Fri Nov 08, 2024 11:29 am
shackle 1917-27

Last post by Melba Nolan « Fri Nov 08, 2024 9:13 am
Replies: 2
by Melba Nolan » Thu Nov 07, 2024 12:23 am

First post

For sale: front shackle set $50 plus shipping

20221029_085129.jpg 20221029_085141.jpg

Last post

sorry, not available. wrong photo posted

2 Replies

694 Views

Last post by Melba Nolan
Fri Nov 08, 2024 9:13 am
Looking for a shop coat with a logo?

Last post by TFan « Thu Nov 07, 2024 10:29 pm
Replies: 3
by DHort » Sun Nov 03, 2024 7:36 pm

First post

coveralls.jpg
shop_coat1.jpg

Available through the Ford Piquette Gift shop. I am not sure if you can purchase directly
or if they have to contact you through an e-mail.

I would call them and ask. 313-872-8759

Last post

You might also try a local uniform rental business, I used to get mine from our local one after they were taken out of service at a pretty good discount. Then you can get whatever logo you want mounted on it. Jim

3 Replies

1370 Views

Last post by TFan
Thu Nov 07, 2024 10:29 pm
Wanted: one bolt and nut

Last post by Will_Vanderburg « Thu Nov 07, 2024 6:40 pm
Replies: 2
by Will_Vanderburg » Wed Nov 06, 2024 7:45 pm

First post

I ordered the wrong part.

I need one bolt and nut for a mid 20s Model T differential housing. My Centerdoor diffy pumpkin is missing one of each.

Can any one help me?

Thanks!

Last post

Send me your address & I'll toss a few in the mail - housing bolts, correct - not the differential case ?

I sent you an email.

2 Replies

1081 Views

Last post by Will_Vanderburg
Thu Nov 07, 2024 6:40 pm
rear spring

Last post by Melba Nolan « Thu Nov 07, 2024 12:28 am

by Melba Nolan » Thu Nov 07, 2024 12:28 am

For sale: rear spring $150 plus shipping

20220707_135539.jpg

0 Replies

1048 Views

Last post by Melba Nolan
Thu Nov 07, 2024 12:28 am
FS accessory vacuum fuel pump

Last post by TRDxB2 « Thu Nov 07, 2024 12:25 am
Replies: 2
by Karl Von Neumann » Wed Jun 19, 2024 10:41 am

First post

Accessory vacuum fuel pump I know nothing about the inside I've never looked there is a float in there you can hear it move. Tank seem like it's solid $80 plus the ride

Last post

Move to top

Some on eBay in a range of prices
Chevrolet G.G Vacuum Tank Mid 1920's Coupe & Sedan

2 Replies

1331 Views

Last post by TRDxB2
Thu Nov 07, 2024 12:25 am
motor mount new price

Last post by Melba Nolan « Thu Nov 07, 2024 12:01 am
Replies: 1
by Melba Nolan » Tue Oct 22, 2024 3:48 pm

First post

For sale: front motor mount early $75 plus shipping

20230927_141458.jpg 20230927_141524.jpg

new price is $50 plus shipping

Last post

move to top

1 Replies

781 Views

Last post by Melba Nolan
Thu Nov 07, 2024 12:01 am
FS New Distributor SOLD

Last post by Texasroadkill « Wed Nov 06, 2024 9:36 pm
Replies: 3
by 25tfire » Tue Oct 29, 2024 2:10 pm

First post

New Texas T Model T Distributor with 6 volt Coil, Wires , Clamp and single rod. $475 plus shipping from 80543

Last post

Email is fine. clint@bitter.ly

3 Replies

1323 Views

Last post by Texasroadkill
Wed Nov 06, 2024 9:36 pm
Stewart 160 Speedometer F/S + One round gas tank strap F/S

Last post by Jeff Perkins « Wed Nov 06, 2024 8:43 pm
Replies: 1
by Jeff Perkins » Wed Nov 06, 2024 8:40 pm

First post

Stewart 160 plus parts shown to set up in your car. Just needs cable ends for the modern cable (included). $400 INCLUDES postage in the continental USA.

One round gas tank strap, as shown, $20 PLUS postage. or PM
Second post shows gas tank strap.

Last post

IMG_3950.jpeg

1 Replies

549 Views

Last post by Jeff Perkins
Wed Nov 06, 2024 8:43 pm
Sold Muncie FOR PARTS

Last post by Karl Von Neumann « Tue Nov 05, 2024 8:40 am
Replies: 4
by Karl Von Neumann » Mon Nov 04, 2024 12:06 pm

First post

I have a Muncie aux trans for a T hoping someone needs parts. It is not complete shifter and top work real well direct drive slider works and looks good case good input and output look good the cluster is shot if you can use anything let me know I'd prefer not to ship the whole thing but I could otherwise I'll strip out what you need scrap the...

Last post

Let me know what you would like for the input and output shafts and the sliding gear.

Sent you an email

4 Replies

1392 Views

Last post by Karl Von Neumann
Tue Nov 05, 2024 8:40 am
Hayes rims

Last post by Allan « Mon Nov 04, 2024 8:11 pm
Replies: 3
by Melba Nolan » Mon Nov 04, 2024 12:34 am

First post

For sale: Hayes rims 30 x 3 $100 each plus shipping
20241027_102852.jpg

Last post

Because the valve stem hole is so close to the slotted lug, when the mounted tyre and tube are fitted to the wheel, the valve stem has to be dropped into the felloe hole, so the nearby lug has to be slotted to drop over the rim bolt. That slotted lug is a give-away that the rim is not a Ford rim, but it can be modified to fit.

Allan from down...

3 Replies

901 Views

Last post by Allan
Mon Nov 04, 2024 8:11 pm
WANTED: 1914 Windshield Frame

Last post by 1915ford « Sun Nov 03, 2024 10:40 pm
Replies: 1
by BRENT in 10-uh-C » Sun Nov 03, 2024 10:06 am

First post

In search of complete & solid 1914 Windshield Frame. Might consider one without support arms, but prefer complete frame with hinges and arms.

TIA.

Last post

Got a beauty. Will send you a pic tomorrow.

1 Replies

625 Views

Last post by 1915ford
Sun Nov 03, 2024 10:40 pm
Horn Reeds $10 ea.

Last post by Rodger Erickson « Sun Nov 03, 2024 2:59 pm
Replies: 3
by Rodger Erickson » Sat Aug 24, 2024 1:04 pm

First post

FS: 2 Horn reeds, removed from imported Bombay Taxi horns. They seem to be of decent quality, and they should work in your Rubes or Nonpareil horns if you apply a little bit of Teflon tape. Asking $10 each, not including shipping.

Treed.jpg

Thanks for looking!

Last post

I still have 3 available thanks.

3 Replies

1160 Views

Last post by Rodger Erickson
Sun Nov 03, 2024 2:59 pm
XXXXXXXXXXX

Last post by BE_ZERO_BE « Sun Nov 03, 2024 1:59 pm
Replies: 6
by Layden Butler » Thu Oct 31, 2024 4:11 pm

First post

XXXXXXXXXXXXXX

Last post

YYYYYYYYYYY

6 Replies

1792 Views

Last post by BE_ZERO_BE
Sun Nov 03, 2024 1:59 pm
WTB Apco muffler

Last post by Shelbycsx « Sun Nov 03, 2024 12:34 pm

by Shelbycsx » Sun Nov 03, 2024 12:34 pm

Looking for an APCO muffler.

0 Replies

1054 Views

Last post by Shelbycsx
Sun Nov 03, 2024 12:34 pm
SOLD: Differentials and Spiders, best offer + shipping

Last post by Gene_French « Sun Nov 03, 2024 10:46 am
Replies: 6
by bmklawt » Thu Oct 31, 2024 11:02 am

First post

I have no clue what this is worth if anything make me an offer, don't be shy no offer is to low.
I can cram all of this in a Large flat rate box

Last post

Bruce:
had emailed you about these parts ... let me know if interested ...Gene French

6 Replies

1569 Views

Last post by Gene_French
Sun Nov 03, 2024 10:46 am
Hayes wire wheel hubcap

Last post by Dan McEachern « Sun Nov 03, 2024 12:42 am
Replies: 3
by Grntea » Sat Nov 02, 2024 2:53 pm

First post

Looking for a needle in a haystack! Below is a picture of a HAYES wire wheel hubcap in brass. They were also made in aluminum. Diameter is 2 1/4 inches. Does any body have an extra one? I have three and need a forth. Thanks MTFCA!

Last post

Bryan- PM sent.

3 Replies

1016 Views

Last post by Dan McEachern
Sun Nov 03, 2024 12:42 am
FS: Early 1914 E&J "Black & Brass" Tail Lamp Refurbished $145

Last post by bryan831daniel « Sat Nov 02, 2024 9:01 pm
Replies: 4
by Rodger Erickson » Fri Nov 01, 2024 1:54 pm

First post

For Sale: One Black & Brass E & J 1908 tail light, refurbished. I believe this is an early 1914, as the second tier is steel but the collar just below it is brass. It has a 1914 style fount. This light was refurbished from a side light with broken out lenses - the side panels and lenses are reproductions as is the door. The reflector is original,...

Last post

Rodger - Sounds like Bill could really use it now. I’m happy to let him purchase it instead. Would be neat to see it on his Runabout. ~Bryan

4 Replies

1055 Views

Last post by bryan831daniel
Sat Nov 02, 2024 9:01 pm
Wanted to Buy; Model T Ford Ignition Coils

Last post by Scott C. « Sat Nov 02, 2024 8:23 pm
Replies: 6
by Ron Patterson » Sat Jul 06, 2024 9:57 am

First post

Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal...

Last post

I sent you an email.

6 Replies

2319 Views

Last post by Scott C.
Sat Nov 02, 2024 8:23 pm
FS Speedometer housing and cable

Last post by YellowTRacer « Sat Nov 02, 2024 1:13 pm
Replies: 2
by YellowTRacer » Thu Oct 31, 2024 2:04 am

First post

54 inch Stewart speedometer cable and housing, appears to have originally been nickel plated as I polished a little of it. $100.00 plus postage.

Ed aka #4

Last post

Speedometer cable and housing has been sold.

Ed aka #4

2 Replies

1024 Views

Last post by YellowTRacer
Sat Nov 02, 2024 1:13 pm
FS Original Torpedo running boards

Last post by YellowTRacer « Sat Nov 02, 2024 1:10 pm
Replies: 4
by YellowTRacer » Thu Oct 31, 2024 1:48 am

First post

Two original Ford Torpedo running boards (Not Repro) removed from an older restoration Ford Torpedo roadster. They're in pretty good condition, with a couple of extra holes other than the ones for the carbide generator mounting. Some old rust pitting is visible under the repaint. Look at the pictures. $150.00 each plus postage.

Ed aka #4

Last post

The running boards are sold.

4 Replies

1168 Views

Last post by YellowTRacer
Sat Nov 02, 2024 1:10 pm
Found one/Wanted- 1914 runabout door latch

Last post by Corey Walker « Sat Nov 02, 2024 12:05 pm
Replies: 6
by Corey Walker » Thu Oct 31, 2024 12:10 pm

First post

I’m looking for a door latch for my runabout. I’ve determined that there were 2 different ones, don’t know if it was because of 2 body makers or what but the handle is in a slightly different spot. The one I need has the handle closer to the rear.
It is easily identifiable by where the handle goes into the latch assembly. The one I have is the...

Last post

Thanks Art, yes that is the one with no daylight showing around the handle. The other style that I have now is 2 1/4” at the spot where the other is 1 1/2”.

6 Replies

1232 Views

Last post by Corey Walker
Sat Nov 02, 2024 12:05 pm
WTB 2589-B FOUND

Last post by Craig Leach « Sat Nov 02, 2024 3:15 am
Replies: 2
by Craig Leach » Fri Nov 01, 2024 10:49 pm

First post

WTB I think the part I'm looking for is 2589-B the early closed spool pinion bearing race. Not the cupped one. Anyone have one they don't need
I have all the parts except that one to put together a second spool. Thanks.
Craig.

Last post

Thanks Karl,
Found one in Az.
Craig.

2 Replies

1063 Views

Last post by Craig Leach
Sat Nov 02, 2024 3:15 am
13/14 Canadian rear fenders

Last post by jmc « Fri Nov 01, 2024 8:23 pm
Replies: 2
by Dollisdad » Fri Oct 25, 2024 12:14 pm

First post

On marketplace. North Branch, Mi. I have no connection. IMG_9020.jpeg

Last post

Would love to see the Canadian details for these fenders - pictures would be very much appreciated.

2 Replies

873 Views

Last post by jmc
Fri Nov 01, 2024 8:23 pm
FS 26-27 COIL BOX LID

Last post by Scott C. « Fri Nov 01, 2024 6:06 pm

by Scott C. » Fri Nov 01, 2024 6:06 pm

I have a reproduction 26-27 coil box lid that I do not need. How about $10 plus shipping?

26-27 cover 2.jpg
26-27 cover 1.jpg

0 Replies

1037 Views

Last post by Scott C.
Fri Nov 01, 2024 6:06 pm
SOLD: 9" Brass Taillamp from 1908-1912'ish

Last post by bryan831daniel « Fri Nov 01, 2024 4:41 pm
Replies: 4
by GGZ » Fri Sep 20, 2024 3:34 pm

First post

SOLD AND SHIPPED TO BRYAN! Thanks!!!

Here is a nice 9 all brass taillamp that dates from about 1908-1912'ish. There are some cracks in the brass. It is complete with the thumb nut, burner, good lenses and a brass bracket. Take a look at the photos. The price is 195.00 including shipping in the USA. Call me at 734- 730- 4274 or email directly at...

Last post

I’m interested. E-mail sent. ~Bryan

4 Replies

1632 Views

Last post by bryan831daniel
Fri Nov 01, 2024 4:41 pm
oval gas brackets

Last post by Melba Nolan « Fri Nov 01, 2024 12:18 pm
Replies: 2
by Melba Nolan » Wed Oct 30, 2024 9:33 am

First post

For sale: oval gas brackets $25 plus shipping
20240619_091429.jpg 20240619_091438.jpg

Last post

can't open it. send to melbanolan@aol.com

2 Replies

725 Views

Last post by Melba Nolan
Fri Nov 01, 2024 12:18 pm
FS 50 year old Calistoga Classics Dirt Track Posters

Last post by big2bird « Fri Nov 01, 2024 10:45 am
Replies: 5
by YellowTRacer » Tue Oct 29, 2024 3:30 am

First post

Still cleaning house, kinda, and ran across a couple of 50 year old advertising posters for the old Calistoga Classics dirt track races that were held in conjunction with the Antique and Collectors Revival, a gigantic (for the time period) antique sale, held at the Napa County Fairgrounds in Calistoga, California. Those races were truly exciting,...

Last post

Doc Pruden was sharp. He bought every speed part he saw back when everyone wanted stock cars only.

Vic Sala was quite the character as well.

5 Replies

1659 Views

Last post by big2bird
Fri Nov 01, 2024 10:45 am
1924 Roadster fuel tank for sale

Last post by Whitehair « Fri Nov 01, 2024 4:17 am
Replies: 1
by Whitehair » Wed Oct 30, 2024 6:08 pm

First post

I have a dirty oval Ford Model T fuel tank for sale. It does not leak. $200.00 or best offer. Buyer pays shipping.

Last post

bump back to the top

1 Replies

1896 Views

Last post by Whitehair
Fri Nov 01, 2024 4:17 am
Early 11 valve covers fs. Sold

Last post by CTLeonard « Thu Oct 31, 2024 4:15 pm
Replies: 3
by CTLeonard » Thu Oct 31, 2024 10:43 am

First post

Saw these were posted the other day and found I had a pair on the shelf. They measure the .095. one is very nice, the mate, not so good. She would take some bondo on the corner and hid on the back side. I will take 75.00 plus shipping for both. ctleonard64@gmail.com 1730385574400524464187865579308.jpg 17303856017764050132182169155307.jpg...

Last post

Mailed to you ray. Email sent

3 Replies

702 Views

Last post by CTLeonard
Thu Oct 31, 2024 4:15 pm
Engine splash pan fs. Sold

Last post by CTLeonard « Thu Oct 31, 2024 2:13 pm

by CTLeonard » Thu Oct 31, 2024 2:13 pm

Fits 1919-27. Not a perfect specimen, but very usable. Just the one pictured. 30.00 plus shipping. ctleonard64@gmail.com 17303982619396929482347332021900.jpg 17303983066691469996956146955168.jpg 1730398329238649868437097560018.jpg

0 Replies

1152 Views

Last post by CTLeonard
Thu Oct 31, 2024 2:13 pm
Headlight forks

Last post by Dollisdad « Thu Oct 31, 2024 1:45 pm
Replies: 4
by Dollisdad » Mon Jun 17, 2024 3:09 pm

First post

2 - 1911-14 right side and 1 - 1909-10 left side fork. $45 each + freight or p/u. IMG_3744.jpeg

Last post

I still have it.

4 Replies

1645 Views

Last post by Dollisdad
Thu Oct 31, 2024 1:45 pm
FS 1915/16 Aluminum Transmission cover

Last post by YellowTRacer « Thu Oct 31, 2024 1:29 pm
Replies: 2
by YellowTRacer » Thu Oct 31, 2024 2:12 am

First post

Bare aluminum transmission cover, no pedals etc. Late style with reinforcing ribs. Good clean condition. $40.00 plus shipping. Pictures on request.

Ed aka #4

Last post

Yeah, it's amazing how much the hobby has changed. I still love the hand cranking but there's fewer and fewer of us.

Ed aka #4

2 Replies

946 Views

Last post by YellowTRacer
Thu Oct 31, 2024 1:29 pm
Want to buy: slanted coil box cover for 25 touring

Last post by Karl Von Neumann « Thu Oct 31, 2024 11:21 am
Replies: 1
by NY John T » Thu Oct 31, 2024 11:10 am

First post

Hi all,
I'm looking for a slanted coil box cover for my 25 touring. Almost any condition please. Thanks,
John

Last post

Ive got them shoot me an email I'll send you some pics

1 Replies

599 Views

Last post by Karl Von Neumann
Thu Oct 31, 2024 11:21 am
WTB 1911 Torpedo Tool Box 28x11x11

Last post by Mike Lebsack-Iowa « Thu Oct 31, 2024 10:56 am
Replies: 3
by MTW » Fri Oct 25, 2024 12:56 pm

First post

Hello All,
Looking for a Torpedo Tool Box for a 1911 Open Roadster. I am unsure of the exact dimensions I got these from a prior posting. Please post here or PM/email me pictures and details.
Thanks,
Lynn

Last post

I will check, I have several tool boxes, one might be the right size. I have an Open Runabout that does have a toolbox on it that can compare to.

3 Replies

922 Views

Last post by Mike Lebsack-Iowa
Thu Oct 31, 2024 10:56 am
ModelT running board blocks fs

Last post by CTLeonard « Thu Oct 31, 2024 10:30 am

by CTLeonard » Thu Oct 31, 2024 10:30 am

I have an abundance of red oak to burn up, so I'm offering red oak running board blocks at half price compared to vendors. 1909-16 require 8 blocks for 15.00 plus shipping. 1917-25 are 4 blocks at 7.50 plus shipping. 1926-7 are 4 blocks at 7.50 plus shipping.. 1909-25 measure 7 3/8 x 1 1/2 x 3/4. 1926-7 are 9 1/8 x 1 1/2 x 3/4. I don't drill the...

0 Replies

939 Views

Last post by CTLeonard
Thu Oct 31, 2024 10:30 am
FS Fatman Steering Wheel (SOLD)

Last post by Craig Leach « Wed Oct 30, 2024 10:59 pm
Replies: 5
by ThreePedalTapDancer » Wed Oct 30, 2024 3:50 pm

First post

Original accessory Model T Ford heavy duty cast steel fatman flip up folding steering wheel center. Ready for a 17 inch wood rim. Works by pulling lever down, which allows steering wheel to flip up out of the way. Great condition, nice paint with some minor pitting, solid with no damage or repairs. Nice looking wheel. 225 includes shipping lower...

Last post

Judging by the depth of that wheel, wasn't someone looking for a wheel that would make it closer to himself?
Craig.

5 Replies

1618 Views

Last post by Craig Leach
Wed Oct 30, 2024 10:59 pm
Spoken For: Large Nickel-Era Electric Headlight Bucket (Rough)

Last post by TXGOAT2 « Wed Oct 30, 2024 10:21 pm
Replies: 5
by Rodger Erickson » Sat Jul 13, 2024 9:58 am

First post

I have one large (12 OD) brass fork-mounted electric headlight bucket, probably ca. 1913-1915. Fork-mounted, with the fork mounts being 10 1/2 center-to-center. Missing the reflector and one mounting bracket as well as some hardware. The bucket is dented in a bunch of places but the ring is quite nice. Probably from a fire truck or fancy bus or...

Last post

That may be for a Cadillac.

5 Replies

1674 Views

Last post by TXGOAT2
Wed Oct 30, 2024 10:21 pm
Wanted: Rim spreader for Model T's

Last post by Marshall V. Daut « Wed Oct 30, 2024 9:58 pm
Replies: 5
by Marshall V. Daut » Mon Oct 28, 2024 2:52 pm

First post

Looking for a reasonably-priced rim spreader for Model T rims.
Marshall

Last post

Thanks, Guys. Problem solved right under my nose. :)
M.

5 Replies

1322 Views

Last post by Marshall V. Daut
Wed Oct 30, 2024 9:58 pm
spindle set SOLD

Last post by Grntea « Wed Oct 30, 2024 8:27 pm
Replies: 3
by Melba Nolan » Tue Jun 18, 2024 11:01 pm

First post

for sale: spindle set $35 plus postage
20240614_101707 - Copy.jpg

Last post

Did you ever sell this spindle set? I am looking for some!

3 Replies

1751 Views

Last post by Grntea
Wed Oct 30, 2024 8:27 pm
FS FRONT AXLE SPINDLE SET (SOLD)

Last post by Grntea « Wed Oct 30, 2024 8:21 pm
Replies: 1
by Mark Chaffin » Mon Aug 19, 2024 6:19 pm

First post

One very nice pair of 26/27 front spindles. Threads and races are in very good condition. Price is $75 plus domestic shipping. SOLD Mark Chaffin (951) 805-0928

20240819_142052.jpg

20240819_141932.jpg

Last post

Do you have any more sets like these front left and right spindle bodies?

1 Replies

1378 Views

Last post by Grntea
Wed Oct 30, 2024 8:21 pm
For Sale: Early 1911 Valve Cover Doors

Last post by Wayne Sheldon « Wed Oct 30, 2024 7:16 pm
Replies: 11
by Ed Fuller » Fri Jun 30, 2023 5:09 pm

First post

Here is a set of early valve cover doors used from late 1910 through June 1911. They measure.093” thick. One has some pitting towards the corner.

$150 plus shipping in the U.S.

8E1A2643-D71D-4ACE-9047-459F07A9CA87.jpeg

AF54B3D0-475D-4F42-BE69-1E54D71FE40F.jpeg

D8FFC04A-C597-474A-9245-4CDAA17DC5C2.jpeg

Last post

My pleasure Jerry!
W2

11 Replies

2809 Views

Last post by Wayne Sheldon
Wed Oct 30, 2024 7:16 pm
SOLD: Best offer, brake pedal, Starter switch, Budweiser radiator cap

Last post by Allan « Wed Oct 30, 2024 6:07 pm
Replies: 6
by bmklawt » Tue Oct 29, 2024 11:15 am

First post

Best offer by Sunday plus shipping

Last post

The radiator cap with the A would suit my cars. I don't want the rest. I am offering $4o dollars for the cap. I will pay postage.

A for Allan from down under.

6 Replies

1376 Views

Last post by Allan
Wed Oct 30, 2024 6:07 pm
WTB ROADSTER PICKUP BODY

Last post by BarnesvilleT « Wed Oct 30, 2024 2:37 pm

by BarnesvilleT » Wed Oct 30, 2024 2:37 pm

Looking for 26 Roadster pickup.
Thanks for any help,
Bill

0 Replies

994 Views

Last post by BarnesvilleT
Wed Oct 30, 2024 2:37 pm
1911 model t valve covers, wtb

Last post by CTLeonard « Wed Oct 30, 2024 2:13 pm
Replies: 3
by Nikko012 » Fri Oct 25, 2024 6:48 pm

First post

Looking for a early 1911 valve cover, should be .095 thickness. It is highly inbossed and heavy

Last post

Email me at ctleonard64@gmail.com I have a pair, one really good, the other you'll have to doctor a bit and stick in the upper back

3 Replies

992 Views

Last post by CTLeonard
Wed Oct 30, 2024 2:13 pm
WTB Gets Spark Plugs

Last post by Tadpole « Wed Oct 30, 2024 10:57 am
Replies: 3
by Tadpole » Mon Jun 03, 2024 12:22 pm

First post

Looking to buy Gets Manufacturing long body spark plugs for old engines, I can be reached by the email attached.

Thank you much!

Last post

One more bump, looking for this plug. I am not picky, any condition will do.

3 Replies

1513 Views

Last post by Tadpole
Wed Oct 30, 2024 10:57 am
WTB 30x3.5 demountable clincher rims

Last post by Karl Von Neumann « Wed Oct 30, 2024 10:54 am
Replies: 2
by Grntea » Tue Oct 29, 2024 11:05 pm

First post

Looking to buy 5 each 30x3.5 demountable clincher rims in usable condition. Thanks MTFCA !

Last post

I've got some 30ea plus the ride

2 Replies

761 Views

Last post by Karl Von Neumann
Wed Oct 30, 2024 10:54 am
FS 11 tooth pinions ( non script sold)

Last post by Craig Leach « Wed Oct 30, 2024 10:06 am
Replies: 5
by Craig Leach » Fri Oct 18, 2024 11:50 am

First post

FS Pinions 11 tooth One Ford script with some small pits (copper colored) & one non script $ 50 each + the ride
Craig. IMG_3294.jpg IMG_3295.jpg IMG_3297.jpg

Last post

Non script pinion sold Thanks Ken.
Craig.

5 Replies

1615 Views

Last post by Craig Leach
Wed Oct 30, 2024 10:06 am
FS Band tool

Last post by Craig Leach « Tue Oct 29, 2024 10:47 pm
Replies: 1
by Craig Leach » Fri Oct 18, 2024 12:13 pm

First post

T-3413-BT band tool New in the bag $ 12 + the ride.
IMG_3303.jpg Craig

Last post

Still for sale & in the vender bag.

1 Replies

1055 Views

Last post by Craig Leach
Tue Oct 29, 2024 10:47 pm
FS Running board blocks

Last post by Craig Leach « Tue Oct 29, 2024 10:41 pm
Replies: 1
by Craig Leach » Sat Oct 19, 2024 1:22 pm

First post

One set of 4822-A running board blocks (one has a odd hole in it ?) $10 + the ride.
Craig. IMG_3309.jpg

Last post

To the top please

1 Replies

940 Views

Last post by Craig Leach
Tue Oct 29, 2024 10:41 pm
FS Head Saver

Last post by Craig Leach « Tue Oct 29, 2024 10:41 pm
Replies: 1
by Craig Leach » Sat Oct 19, 2024 1:34 pm

First post

A-6010-AHS or 3001-AHS Head Saver Anode $ 7.50 + the ride.
IMG_3310.jpg Craig.

Last post

To the top please.

1 Replies

1134 Views

Last post by Craig Leach
Tue Oct 29, 2024 10:41 pm
FS DS 23-25 WS Stanchion

Last post by Craig Leach « Tue Oct 29, 2024 10:40 pm
Replies: 1
by Craig Leach » Sat Oct 19, 2024 9:53 pm

First post

1923-1925 D/S Windshield stanchion, show's no signs of bolt markings but can not say is NOS. $80 + shipping. IMG_3314.jpg IMG_3315.jpg can send other pics if needed
Craig.

Last post

New price $60

1 Replies

837 Views

Last post by Craig Leach
Tue Oct 29, 2024 10:40 pm
FS rear window trim

Last post by Craig Leach « Tue Oct 29, 2024 10:38 pm
Replies: 1
by Craig Leach » Sat Oct 19, 2024 11:56 pm

First post

I have no idea for sure if this is 1927 rear closed car window trim. It is solid but rusty & looks to have had the screws over tightened. Will take
offers + shipping.
Craig IMG_3318.jpg

Last post

To the top please.

1 Replies

946 Views

Last post by Craig Leach
Tue Oct 29, 2024 10:38 pm
Want to Buy 20 Inch Model TT Truck Rim for 1924 TT Truck

Last post by GatorsModelT « Tue Oct 29, 2024 9:36 pm
Replies: 5
by GatorsModelT » Thu Oct 24, 2024 9:32 pm

First post

Want to buy a 20 Inch Model TT Truck Rim for a 1924 TT Truck. Please contact me here in the Classifieds.

Thank you,
Eric

Last post

Thank you Mark for the info.

5 Replies

1235 Views

Last post by GatorsModelT
Tue Oct 29, 2024 9:36 pm
30x3 front rims

Last post by Karl Von Neumann « Tue Oct 29, 2024 5:18 pm
Replies: 4
by Nikko012 » Sat Oct 26, 2024 10:42 pm

First post

Looking for two 30 x3 rims. New manufacture if possible. Wtb

Last post

I have nice used ones 30 each plus the ride

4 Replies

1413 Views

Last post by Karl Von Neumann
Tue Oct 29, 2024 5:18 pm
Bolts

Last post by KWTownsend « Tue Oct 29, 2024 3:23 pm
Replies: 4
by Original Smith » Sat Oct 26, 2024 11:45 pm

First post

Is anyone making the correct 1/4-28 engine dust pan bolts. These were used on the brass radiator cars.

Last post

From the 1912 catalog:
1/4 x 9/16 quantity: 7

engine pan bolts 1912 catalog close.png

Here are some that I believe Richard Eagle made:

engine pans bolts and nuts.jpg

Here is from the 1916 catalog:
3088B 1/4 x 3-1/4 quantity: 2
3088C 1/4 x 3-5/8 quantity: 2

1916 engine pan bolts.png

: ^ )

4 Replies

1589 Views

Last post by KWTownsend
Tue Oct 29, 2024 3:23 pm
Best offer, axle gears

Last post by bmklawt « Tue Oct 29, 2024 11:12 am

by bmklawt » Tue Oct 29, 2024 11:12 am

Best offer by Sunday, plus shipping

0 Replies

1023 Views

Last post by bmklawt
Tue Oct 29, 2024 11:12 am
Someone was searching for this recently !

Last post by RajoRacer « Tue Oct 29, 2024 9:26 am
Replies: 3
by RajoRacer » Fri Oct 25, 2024 6:15 pm

First post

Someone posted a wanted ad recently but danged if I could find it again - repro. early brass fuel shut-off - drop me a note through the Forum - found one in my stock.

Last post

Valve has found a new home to the first fella needing one !

3 Replies

1537 Views

Last post by RajoRacer
Tue Oct 29, 2024 9:26 am
FS Brass sediment bowl

Last post by YellowTRacer « Tue Oct 29, 2024 1:22 am
Replies: 14
by YellowTRacer » Thu Oct 17, 2024 1:58 am

First post

Early brass Ford script sediment bowl. The shut off/on handle works fine. $90.00

Ed aka #4

Last post

The sediment bowl is sold!

Ed aka #4

14 Replies

3281 Views

Last post by YellowTRacer
Tue Oct 29, 2024 1:22 am
WTB Wrist Pins

Last post by Jonathan Hoffman « Mon Oct 28, 2024 7:02 pm

by Jonathan Hoffman » Mon Oct 28, 2024 7:02 pm

Hello,
I'm looking for a set of wrist pins (two if possible) for a speedster engine I'm building. They need to be machined without the groove in the center for the pinch bolt as I'm going to be using a full floating pin setup. They also need to be the stock .740 O.D.

Thanks I'm advance

0 Replies

1000 Views

Last post by Jonathan Hoffman
Mon Oct 28, 2024 7:02 pm
windshield hinges SOLD

Last post by Kevin Pharis « Mon Oct 28, 2024 2:41 pm
Replies: 1
by Melba Nolan » Mon Oct 28, 2024 8:24 am

First post

For sale: set of windshield hinges $50 plus postage
20241009_182508.jpg

Last post

Email sent

1 Replies

833 Views

Last post by Kevin Pharis
Mon Oct 28, 2024 2:41 pm
FS tudor sedan front seats

Last post by Karl Von Neumann « Mon Oct 28, 2024 11:38 am
Replies: 1
by Karl Von Neumann » Mon Oct 28, 2024 11:38 am

First post

I've got 2 tudor sedan front seat frames no springs one is just the back frame and hinges with dammage 50$ plus the ride and the other is the back with hinges floor mounts and under seat braces 80$ plus the ride . Both are stamped ford 2 different #s T9757b and T5617

Last post

More pics....

1 Replies

546 Views

Last post by Karl Von Neumann
Mon Oct 28, 2024 11:38 am
Wanted: wood firewall cap for a 1919

Last post by Fozz71 « Mon Oct 28, 2024 10:47 am
Replies: 8
by Fozz71 » Fri Oct 25, 2024 3:08 pm

First post

Anyone have any success fabbing a cap (or suggesting how) for the wooden firewall? I have a 1919 that has lost its cap, I would like to protect the wooden edge from delaminating.

Thanks,
James

Last post

Karl, I sent a response.

8 Replies

1579 Views

Last post by Fozz71
Mon Oct 28, 2024 10:47 am

New Topic

10457 topics

Page 36 of 105
- Jump to page:
Previous
1
…
34
35
36
37
38
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum