Classifieds - Parts - Page 40

Classifieds - Parts

New Topic

10458 topics

Page 40 of 105
- Jump to page:
Previous
1
…
38
39
40
41
42
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

84113 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Stromberg LF for parts - not for restoration -SOLD

Last post by Scott_Conger « Mon Sep 16, 2024 1:35 pm

by Scott_Conger » Mon Sep 16, 2024 1:35 pm

Use this as a lesson how to terminate an ad WITHOUT BUMPING EVERYONE ELSE'S STUFF DOWN THE LIST.

Junk carb - not reasonably a rebuild candidate...it is a donor carb

no float cover nut
no float
no float valve needle
no choke wire securing screw
modified mixture needle
pictures are the best description

despite the obvious problems, there remain a...

0 Replies

1156 Views

Last post by Scott_Conger
Mon Sep 16, 2024 1:35 pm
WTB one wood coil.

Last post by J1MGOLDEN « Mon Sep 16, 2024 12:49 pm
Replies: 6
by Tim D » Tue Jul 02, 2024 11:06 am

First post

WTB one rebuilt wood coil or one that just needs a cap. In Wisconsin. Thanks

Last post

Another give away for the coil is whether the slide off side has two small nails to hold it in place or a staple.

The ones with the nails have Ford at the top or perhaps if older, in the center of the other side.

I have found coils that make sparks on the Hand Crank Coil Tester with no sparks showing on the StroboSpark Coil Tester.

They always...

6 Replies

1574 Views

Last post by J1MGOLDEN
Mon Sep 16, 2024 12:49 pm
4 Wood Felloe Model T wheels

Last post by phaeton 15 « Mon Sep 16, 2024 10:38 am

by phaeton 15 » Mon Sep 16, 2024 10:38 am

4 Wood Felloe Model T wheels- Good Condition, clincher edges straight, takes 30X3 tire and tube, wheel plate plain, $600 or make offer jferguson27@austin.rr.com 100_3301.JPG 100_3298.JPG 100_3299.JPG

0 Replies

987 Views

Last post by phaeton 15
Mon Sep 16, 2024 10:38 am
Looking to buy 26 27 tudor driver seat frame

Last post by Ahvaldez « Sun Sep 15, 2024 10:26 pm
Replies: 2
by Ahvaldez » Sun Sep 15, 2024 7:52 pm

First post

Looking to buy 26 27 tudor driver seat frame any help is appreciated

Last post

Nope need the seat frames unfortunately the previous owner installed ford ranger seats

2 Replies

634 Views

Last post by Ahvaldez
Sun Sep 15, 2024 10:26 pm
FS Hutchins A-OOO-GAH Horn 6V

Last post by Colin McCallum « Sun Sep 15, 2024 10:05 pm
Replies: 2
by jamesb » Sat Sep 14, 2024 6:50 pm

First post

6V Hutchins A-OOO-GAH horn. Needs restoration I tested this on a battery and while the motor does spin, it does not make the horn sound. $40 plus shipping or pickup in Burbank, CA
PXL_20240914_224028244.jpg PXL_20240914_224022421.jpg PXL_20240914_224016841.jpg PXL_20240914_224007098.jpg

Last post

I would like to buy this.

2 Replies

621 Views

Last post by Colin McCallum
Sun Sep 15, 2024 10:05 pm
WTB…..Milt Webbs book

Last post by WorldChamp1914 « Sun Sep 15, 2024 8:12 pm
Replies: 5
by WorldChamp1914 » Fri Sep 06, 2024 2:00 pm

First post

A friend of mine who is new to Model T-s could benefit from Milt Webbs book………I can’t find one on EBay for him…..Thanks!

Last post

Didn’t he sell a ruckstell repair book?

5 Replies

1420 Views

Last post by WorldChamp1914
Sun Sep 15, 2024 8:12 pm
FS 1914 model T sales catalog

Last post by KimDobbins « Sun Sep 15, 2024 6:39 pm
Replies: 2
by KimDobbins » Sun Sep 15, 2024 2:18 pm

First post

Nice original January 1914 sales catalog. Has a water stain in lower corner. It has the notice of speedometers being available. $100 plus $10 shipping. kdmks AT .att.net.

Last post

Sold to Scott.

2 Replies

784 Views

Last post by KimDobbins
Sun Sep 15, 2024 6:39 pm
WTB ignition coils for T

Last post by Tparts « Sun Sep 15, 2024 4:50 pm
Replies: 1
by Kajtek1 » Sun Sep 15, 2024 11:44 am

First post

Need to be tested.

Last post

I have a number of brass top coils( tested ) available for $15.00 each plus shipping. Also black plastic coils for $10.00 each plus shipping.
Lang’s Old Car Parts Inc 1-800-872-7871

1 Replies

604 Views

Last post by Tparts
Sun Sep 15, 2024 4:50 pm
SPOKEN FOR - DO RAY CATAPHOTE - 260 CATEYE REFLECTOR SET

Last post by Speedsterguy2 « Sun Sep 15, 2024 3:32 pm
Replies: 1
by Jay In Northern Ca. » Sat Sep 14, 2024 7:14 pm

First post

Lenses are in great condition and are three inches in diameter. One is in primmer. Asking $55 for the pair plus small flat rate postage.
DORAY CATAPHOTE - 260 CATEYE REFLECTOR SET front.jpg DORAY CATAPHOTE - 260 CATEYE REFLECTOR SET back.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

I will take the Do Ray reflectors, pair. Sending an email. Thx / Tim

1 Replies

687 Views

Last post by Speedsterguy2
Sun Sep 15, 2024 3:32 pm
FS magneto coil winder

Last post by KimDobbins « Sun Sep 15, 2024 2:07 pm

by KimDobbins » Sun Sep 15, 2024 2:07 pm

Home made mag coil winder. $25.00 plus shipping. kdmks AT att.net.

0 Replies

1119 Views

Last post by KimDobbins
Sun Sep 15, 2024 2:07 pm
Parts for sale

Last post by Grntea « Sun Sep 15, 2024 12:22 pm
Replies: 13
by KimDobbins » Sat Sep 14, 2024 6:25 pm

First post

Stewart 26 speedo, for parts. $35.00. 1909-10 fine thread tie rod end, $35.00. 1913-14 side light bracket, $15.00. New repo brass radiator neck, $35.00. Valve cover door, $5.00. 4 body brackets, $10.00 for all. Original 1909-10 rear muffler end, $25.00. new repo 1911-14 muffler curved tail pipe, $20.00. 2 brass sediment bulbs, $25.00 for all....

Last post

I would like the tail light bracket!

13 Replies

2684 Views

Last post by Grntea
Sun Sep 15, 2024 12:22 pm
FS NOS crank handle

Last post by KimDobbins « Sun Sep 15, 2024 11:37 am
Replies: 2
by KimDobbins » Sat Sep 14, 2024 6:42 pm

First post

NOS crank handle spring and bushing. $75.00 plus shipping. kdmks AT att.net.

Last post

Sold to Tom

2 Replies

933 Views

Last post by KimDobbins
Sun Sep 15, 2024 11:37 am
WTB 1923-25 RH Roadster quarter panel

Last post by ModelTRoadster « Sun Sep 15, 2024 11:03 am
Replies: 1
by micshotrodgarage » Thu Sep 12, 2024 11:58 am

First post

WTB RH quarter panel for a 1923-25 Roadster, If you might have the panel behind the door, this is what I am needing. Please let me know if anyone has one in their pile of T parts. Thanks...Mike

Last post

I do have one of those, if you would call me rather than email, it’s easier for me, i’m bad at email. my cell is 585-738-1988.
thank you,
Tom Stewart
Churchville, NY

1 Replies

789 Views

Last post by ModelTRoadster
Sun Sep 15, 2024 11:03 am
NO LONGER NEEDED ! - WANTED TO PURCHASE - STEERING GEAR CUP 1926 COUPE

Last post by lirogo27 « Sun Sep 15, 2024 10:51 am

by lirogo27 » Sun Sep 15, 2024 10:51 am

I am located in California. Willing to pick up locally if necessary. Looking for a 1926 Steering Gear Case/Cup. If it comes with cover, I am happy to purchase as set. Thank you. Lisa - Please contact me via the forum message center if you do have these items!

0 Replies

837 Views

Last post by lirogo27
Sun Sep 15, 2024 10:51 am
SPOKEN FOR - STEERING WHEEL HORN BUTTON REPLACES THE STEERING WHEEL CENTER NUT

Last post by Jay In Northern Ca. « Sun Sep 15, 2024 9:53 am
Replies: 2
by Jay In Northern Ca. » Sat Sep 14, 2024 9:01 pm

First post

Asking $40 plus postage. APCO STEERING WHEEL NUT HORN BUTTON 2.jpg APCO STEERING WHEEL NUT HORN BUTTON 4.jpg APCO STEERING WHEEL NUT HORN BUTTON 1.jpg APCO STEERING WHEEL NUT HORN BUTTON 3.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

Thanks Alan!

2 Replies

751 Views

Last post by Jay In Northern Ca.
Sun Sep 15, 2024 9:53 am
Wanted - 1917 Shackle

Last post by Russ_Furstnow « Sun Sep 15, 2024 9:33 am

by Russ_Furstnow » Sun Sep 15, 2024 9:33 am

As I restore my 1917 Ford, I need a set of front and rear shackles. They are similar to the figure eight shackles but have no provision for an oiler. Any help is appreciated. See photo. Thanks, Russ Furstnow

0 Replies

979 Views

Last post by Russ_Furstnow
Sun Sep 15, 2024 9:33 am
SOLD 1913-Early 1915 Rubes Brass Horn

Last post by GGZ « Sat Sep 14, 2024 7:54 pm
Replies: 3
by GGZ » Fri Aug 16, 2024 4:28 pm

First post

SoId to Paul! Here is an original 1913 to early 1915 Rubes horn. It has its share of bumps and bruises. It would be good for an unrestored car or ? Take a look at the photos, you get what it is.

The price is 100.00 and it includes shipping in the USA.

Call me at: 734-730-4274 or email: motoringicons@hotmail.com

Thanks.

Last post

Sold to Paul!

3 Replies

1869 Views

Last post by GGZ
Sat Sep 14, 2024 7:54 pm
FS Spartonet Horn [SOLD]

Last post by jamesb « Sat Sep 14, 2024 7:27 pm
Replies: 2
by jamesb » Sat Sep 14, 2024 6:34 pm

First post

Spartonet (model F) hand operated horn. The horn does work and appears to be complete; however, the knob / push assembly is quite loose. As a result, the push assembly will often not return to the fully extended position and requires a slight jiggle. Asking $30 plus shipping or can pick up in Burbank, CA.

PXL_20240914_221527646.jpg...

Last post

Sale pending. Thanks MTFCA.

2 Replies

697 Views

Last post by jamesb
Sat Sep 14, 2024 7:27 pm
FS MISCELLANEOUS

Last post by Mark Chaffin « Sat Sep 14, 2024 1:23 pm
Replies: 9
by Mark Chaffin » Fri Sep 13, 2024 2:55 pm

First post

An assortment of miscellaneous items as escribed below. Mark Chaffin (951) 805-0928

20240619_130538.jpg
Waterpump pulley assortment for flat and V belt. Get all three for $25.00 plus $8.50 domestic shipping.

20240814_095310.jpg
Atwater Kent Distributor Coil units. $25.00 each or get the pair for $40.00. Domestic shipping $18.50...

Last post

Wings going to Chad. :)

9 Replies

1840 Views

Last post by Mark Chaffin
Sat Sep 14, 2024 1:23 pm
WTB. Steering bracket for 'TT' Right Hand Drive.

Last post by Allan « Sat Sep 14, 2024 4:22 am
Replies: 7
by v10pdownunder » Tue Sep 03, 2024 4:36 am

First post

Part no. 3539C that attaches steering column to chassis rail. Will be made as mirror image of standard unit.
Most likely to surface in Australia, U.K., New Zealand or Argentina right hand drive markets ?
I could actually make use of 2 of them.

Last post

I found it Ian. Cast into the underside is TT 1924-B With the Ford script below and an A in a circle, most likely the maker's mark. It has only one hole, for the advance/retard rod, so will be for a generator equipped vehicle. Au$20 plus whatever the postage is.

Allan from down under.

7 Replies

1675 Views

Last post by Allan
Sat Sep 14, 2024 4:22 am
WTB carbibe generator latch handle fo Jno Brown

Last post by v10pdownunder « Fri Sep 13, 2024 11:31 pm
Replies: 3
by Don ellis » Wed Sep 11, 2024 9:48 am

First post

I lost a latch handle on the road somewhere, luckily the nut was on the running board. Does anyone have an extra?
Thanks

Last post

I've already been conversing with these people already and they tell me thismorning that they do not have the parts in their advert picture

3 Replies

936 Views

Last post by v10pdownunder
Fri Sep 13, 2024 11:31 pm
FOR SALE - MODEL T ACCESSORY STEERING CONTROL NEW OLD STOCK IN THE ORIGINAL BOX

Last post by Jay In Northern Ca. « Fri Sep 13, 2024 9:14 pm
Replies: 1
by Jay In Northern Ca. » Fri Sep 13, 2024 9:12 pm

First post

This new old stock accessory helps smooth out the steering when you hit a rut or lip in the road that grabs the steering wheel. Asking $40 plus postage.

steering control 2.jpg steering control 1.jpg steering control 3.jpg steering control 4.jpg steering control 5.jpg

Last post

steering control 6.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

1 Replies

761 Views

Last post by Jay In Northern Ca.
Fri Sep 13, 2024 9:14 pm
SPOKEN FOR -THOMAS TIMER ELEVATOR SETUP IN EXCELLECT CONDITON

Last post by Jay In Northern Ca. « Fri Sep 13, 2024 7:06 pm

by Jay In Northern Ca. » Fri Sep 13, 2024 7:06 pm

This is a much sought after timer elevator that moves any standard timer up to a easy location to get at for maintenance. The gears are in excellent condition. Comes with a new proper control rod that a friend and fellow forum member made for me from his pattern for this unit. Asking $250 plus postage.
Thomas Timer Elevator 1.jpg Thomas Timer...

0 Replies

1075 Views

Last post by Jay In Northern Ca.
Fri Sep 13, 2024 7:06 pm
SPOKEN FOR - SCHAROUN THERMOSTATIC CABURETOR MIXTURE CONTROL MINT IN THE ORIGINAL BOX!

Last post by Jay In Northern Ca. « Fri Sep 13, 2024 6:20 pm

by Jay In Northern Ca. » Fri Sep 13, 2024 6:20 pm

This is a new old stock one hundred year old accessory that will automatically adjust your carburetors mixture. It uses a bi-metallic strip like a home thermostat uses. Asking $60 plus shipping. Scharoun Carburetor control 1.jpg Scharoun Carburetor control 2.jpg Scharoun Carburetor control 3.jpg Scharoun Carburetor control 4.jpg

Please use the...

0 Replies

942 Views

Last post by Jay In Northern Ca.
Fri Sep 13, 2024 6:20 pm
WTB Model A Multiple clutch Pedal Pads

Last post by Jeepster47 « Fri Sep 13, 2024 9:11 am

by Jeepster47 » Fri Sep 13, 2024 9:11 am

Looking for a good used pedal pad assembly for a 28 with multiple disc clutch. ( goes around steering column and pedals to seal). I know they make new ones but I have an original unrestored car and new parts just stick out like a sore thumb.

0 Replies

909 Views

Last post by Jeepster47
Fri Sep 13, 2024 9:11 am
FS: Goodrich "Safety First" enamel radiator badge

Last post by blauvelt « Fri Sep 13, 2024 9:00 am
Replies: 2
by blauvelt » Fri Aug 23, 2024 6:04 pm

First post

Please see photo for size. Enamel. Good condition. $40.00 delivered lower 48.

Last post

Back to the top...

2 Replies

1446 Views

Last post by blauvelt
Fri Sep 13, 2024 9:00 am
F.S. - Brand new extra tall trailer.

Last post by Sarikatime « Fri Sep 13, 2024 6:21 am

by Sarikatime » Fri Sep 13, 2024 6:21 am

Beautiful brand new trailer that I just bought. The trailer is 7’- 6” wide by 7’- 6” tall interior by 16’ long plus the 2’ V nose. Rear door fold down, led lights, plywood interior sides and floor, silver color with screwless outside paneling. I ordered the 7’- 6” wide since I like to know what is happening behind me while towing down the road and...

0 Replies

1250 Views

Last post by Sarikatime
Fri Sep 13, 2024 6:21 am
FS Boyco Running Board Cans w/out carrier

Last post by jamesb « Thu Sep 12, 2024 11:11 pm
Replies: 1
by jamesb » Thu Sep 12, 2024 8:03 pm

First post

Set of three Boyco running board cans (9-3/8 deep). These are in decent shape, but do note the dent in the unpainted can. $200 OBO plus shipping. Local pickup in Burbank, CA

PXL_20240912_234903324.jpg PXL_20240912_234845157.jpg PXL_20240912_235622719.jpg PXL_20240912_234927264.jpg PXL_20240912_234910925.jpg

Last post

Sale pending! Thanks MTFCA

1 Replies

736 Views

Last post by jamesb
Thu Sep 12, 2024 11:11 pm
Reproduction 1909-1912 E & J Gererator parts

Last post by dryden « Thu Sep 12, 2024 10:16 pm

by dryden » Thu Sep 12, 2024 10:16 pm

Brass top tank main ring $60
Brass bottom tank mounting brackets set of 3 $24
Locking E & J side levers set of 2 $125
Brass Thumb nuts with the brass screw good for the head lights as well as the generator set of 5 $50
Brass top tank gas tap $ 60 small amount to screw the lever in
Please email daveandjand@gmail.com

0 Replies

1067 Views

Last post by dryden
Thu Sep 12, 2024 10:16 pm
xxxxxxxxxxxxxxxxxxxxxxxxx

Last post by GGZ « Thu Sep 12, 2024 8:56 pm
Replies: 9
by GGZ » Tue May 14, 2024 6:58 pm

First post

xxxxxxxxxxxxxxxxxxxxxxxxxxx

Last post

Pxxxxxxxxxxxxxxxxxxxxxxxx

9 Replies

14929 Views

Last post by GGZ
Thu Sep 12, 2024 8:56 pm
xxxxxxxxxxxxxxxxxxxxxxxx

Last post by GGZ « Thu Sep 12, 2024 8:51 pm
Replies: 9
by GGZ » Thu Jan 25, 2024 8:13 pm

First post

xxxxxxxxxxxxxxxxxxxxxxxxxx

Last post

xxxxxxxxxxxxxxxxxxxxx

9 Replies

11304 Views

Last post by GGZ
Thu Sep 12, 2024 8:51 pm
xxxxxxxxxxxxxxxxxxxxxxxxxx

Last post by GGZ « Thu Sep 12, 2024 8:49 pm
Replies: 6
by GGZ » Wed Apr 24, 2024 2:05 pm

First post

xxxxxxxxxxxxxxxxxxxxxxxxx

Last post

xxxxxxxxxxxxxxxxxxxxxx

6 Replies

8151 Views

Last post by GGZ
Thu Sep 12, 2024 8:49 pm
New E & J Carbide Generator Mounting Brackets

Last post by dryden « Thu Sep 12, 2024 8:46 pm
Replies: 9
by dryden » Fri Sep 06, 2024 8:47 am

First post

10 new 1909-1912 E & J Carbide Generator mounting brackets, excellent reproduction $130US delivered anywhere in USA and Canada.

Last post

All the generator brackets have now been sold and sent to the buyers, Thank you everyone. I still have many generator parts for sale I will be putting another post up in regards to them

9 Replies

1996 Views

Last post by dryden
Thu Sep 12, 2024 8:46 pm
WTB - crankshaft

Last post by big2bird « Thu Sep 12, 2024 11:54 am
Replies: 4
by Gen3AntiqueAuto » Wed Sep 11, 2024 2:36 pm

First post

Looking for a stock size scat/dubats/NZ/whatever new crankshaft. Anyone hoarding? EMAIL me with a price if you do.

Last post

Have a Sure Mike?

I have a Sure Mike, too Joe. I don't think he wants a Sure Break.

I have had a Sure Mike in my touring 50 years. Just have to find a good one.

4 Replies

1572 Views

Last post by big2bird
Thu Sep 12, 2024 11:54 am
NEW Transmission Main Shafts FS

Last post by Dan Hatch « Wed Sep 11, 2024 3:42 pm
Replies: 9
by Dan Hatch » Sat Aug 03, 2024 2:36 pm

First post

I have some new transmission main shafts. Extra to me. Why mess with the old Ford shafts. I have not found one straight enough to use. I don’t think they were straight 100 years ago. These are. $195.00 each + shipping. Email me at address in pictures. Thanks Dan
IMG_3392.jpeg
IMG_3393.jpeg
IMG_3394.jpeg
IMG_0260.jpeg

Last post

Back to the top

9 Replies

2914 Views

Last post by Dan Hatch
Wed Sep 11, 2024 3:42 pm
Item no longer available.

Last post by YoungTDave! « Wed Sep 11, 2024 2:35 pm
Replies: 6
by Adam » Wed Mar 09, 2022 10:20 am

First post

Item no longer available.

Last post

Did you ever sell?

6 Replies

2443 Views

Last post by YoungTDave!
Wed Sep 11, 2024 2:35 pm
23/25 touring top irons

Last post by YoungTDave! « Wed Sep 11, 2024 2:33 pm
Replies: 3
by Racer_22 » Mon May 01, 2023 7:57 pm

First post

I have a set of new reproduction 23-25 one man top irons for sale. Never bin mounted on the car. These are the ones the dealers sold before they were discontinued in about 2019. Price $1,600.00 plus actual shipping. Prus, three three 0-77four-71three0. kprus@zoominternet.net

Last post

Do you still have?

3 Replies

1517 Views

Last post by YoungTDave!
Wed Sep 11, 2024 2:33 pm
26-7 shortblock

Last post by Joe Bell « Wed Sep 11, 2024 2:06 pm

by Joe Bell » Wed Sep 11, 2024 2:06 pm

Have a 26-7 short block .060 over pistons, .020 under rods, .030 under mains, hardened seats, s.s steel valves, adjustable tappets, aluminum timing gear, pre hershey price 2000. at hershey it will be 2500. Tiffin Ohio 419-618-1025 Joe, Thanks!

0 Replies

1118 Views

Last post by Joe Bell
Wed Sep 11, 2024 2:06 pm
FS storage jacks

Last post by Karl Von Neumann « Wed Sep 11, 2024 1:49 pm
Replies: 1
by Karl Von Neumann » Wed Sep 11, 2024 1:48 pm

First post

Storage jacks one set of 3 on pair and a few singles some have issues 40$ each plus the ride

Last post

More pictures

1 Replies

745 Views

Last post by Karl Von Neumann
Wed Sep 11, 2024 1:49 pm
Kingston carb

Last post by Melba Nolan « Tue Sep 10, 2024 11:31 pm
Replies: 7
by Melba Nolan » Sun Sep 24, 2023 6:31 pm

First post

For sale: Kingston Model L4 carb $75 plus postage

20220608_204720.jpg

Last post

move to top

7 Replies

1683 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:31 pm
burner cone NEW PRICE

Last post by Melba Nolan « Tue Sep 10, 2024 11:30 pm
Replies: 9
by Melba Nolan » Sat Dec 02, 2023 7:25 pm

First post

For sale: new never used large Burner Cones. $20 each plus postage.

email: melbanolan@aol.com
text: 314-575-7115

Last post

move to top

9 Replies

2174 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:30 pm
outlet water pipe new

Last post by Melba Nolan « Tue Sep 10, 2024 11:29 pm
Replies: 5
by Melba Nolan » Sun Feb 19, 2023 10:12 am

First post

for sale: outlet connection pipe, for water pump 10 3/4 $5 plus postage new

melbanolan@aol.com 314-575-7115

Last post

move to top

5 Replies

1608 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:29 pm
locking foot pedal

Last post by Melba Nolan « Tue Sep 10, 2024 11:18 pm
Replies: 5
by Melba Nolan » Mon Feb 05, 2024 8:32 pm

First post

for sale: locking foot pedal for exhaust whistle $10 plus postage

pictures........melbanolan@aol.com or 314-575-7115

Last post

move to top

5 Replies

2126 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:18 pm
Swap meet

Last post by Melba Nolan « Tue Sep 10, 2024 11:12 pm

by Melba Nolan » Tue Sep 10, 2024 11:12 pm

Reminder that Horseless Carriage Club of Missouri will be having their 45th Annual Swap Meet and Car Show. gates open at 6:30 at the Fox Service Center 849 Jeffco Blvd. Arnold, Mo.

0 Replies

1020 Views

Last post by Melba Nolan
Tue Sep 10, 2024 11:12 pm
SOLD Robe rail

Last post by Karl Von Neumann « Tue Sep 10, 2024 2:36 pm
Replies: 4
by Karl Von Neumann » Sat Apr 27, 2024 9:42 pm

First post

For sale Robe rail for rebuild the end are nice one got a big gouge froma saw or cut off wheel at some point t the brass hardware seems to be taped to it the pipe is so broken ill cut it off 100$ shipp lower 48 not sure what years used this specifically

Sold sold sold

Last post

Move to top

4 Replies

1553 Views

Last post by Karl Von Neumann
Tue Sep 10, 2024 2:36 pm
Ignition parts at Hershey

Last post by Tom VanMeeteren « Tue Sep 10, 2024 1:59 pm
Replies: 2
by Tom VanMeeteren » Mon Sep 09, 2024 9:43 pm

First post

We will be at Hershey again this year with a lot of parts for the various add on distributors that were used on the model T. Find us at C4N 31 -32

Tom

Last post

Yes, I will have gears too. However, I am a little lite on gears for the Ford units. Other makes and models - no problem

2 Replies

1012 Views

Last post by Tom VanMeeteren
Tue Sep 10, 2024 1:59 pm
SOLD 13 14 carbide generator 4 parts

Last post by JTT3 « Tue Sep 10, 2024 1:41 pm
Replies: 2
by Karl Von Neumann » Tue Sep 10, 2024 12:33 pm

First post

13 14 carbide generator for parts of restoration complete but beat has rust issues along the bottom of the water tank and base of the unit. 200$ shipped in the lower 48

Last post

Sent you an email with question.

2 Replies

828 Views

Last post by JTT3
Tue Sep 10, 2024 1:41 pm
FS - 1 Step plate - Sold

Last post by South Park Zephyr « Tue Sep 10, 2024 1:34 pm
Replies: 3
by TheSaintDiscJockey » Fri Sep 06, 2024 8:48 am

First post

One aluminum step plate.
Comes with hardware.
Just install.

15.00 plus shipping.

Please text Brooks @ six zero 9,
9 two 0, 4 2 two zero.

Many thanks!

Last post

It arrived today,

Thanks,
Scott

3 Replies

1149 Views

Last post by South Park Zephyr
Tue Sep 10, 2024 1:34 pm
SOLD 26/27 running boards

Last post by Shannon_in_Texas « Tue Sep 10, 2024 9:43 am
Replies: 1
by fordrelic » Mon Sep 09, 2024 9:03 pm

First post

For Sale a good set of 26/27 running boards.
Ford Script both sizes ,Made in USA.

$175 plus shipping

Thanks,
Clay

26 running boards.jpg 26 running boards 2.jpg

Last post

Clay, I sent you an email/PM. Thanks!

1 Replies

735 Views

Last post by Shannon_in_Texas
Tue Sep 10, 2024 9:43 am
retirement sale

Last post by 23ford « Mon Sep 09, 2024 3:55 pm
Replies: 8
by 23ford » Mon Aug 19, 2024 3:12 am

First post

I am selling the parts storehouse of my dad and grandpa. As I get stuff out and sorted I will take pictures and list here.
First items are a rain topper for seventeen to twenty one goes at top of wood firewall $45
3 nice steering wheels with metal spyders and bakealike rims $39 each
double Flair tool with box $35
3 piece vacuum grip miniature...

Last post

Still for sale

8 Replies

3550 Views

Last post by 23ford
Mon Sep 09, 2024 3:55 pm
FS 1909-10 hub caps

Last post by KimDobbins « Mon Sep 09, 2024 12:43 pm
Replies: 5
by KimDobbins » Sun Sep 08, 2024 4:05 pm

First post

I have 10 original 1909-10 hubcap for sale. Not perfect but still very good. $40 each. Plus shipping. Kdmks AT att.net.

Last post

Sorry, no 12 hubcaps.

5 Replies

1343 Views

Last post by KimDobbins
Mon Sep 09, 2024 12:43 pm
F-S KW SWITCH

Last post by John iaccino « Mon Sep 09, 2024 9:51 am
Replies: 8
by John iaccino » Mon Jul 08, 2024 9:36 am

First post

KW switch. Works, key does not withdraw from switch. Fits Master Vibrator and 1913 coil box. Needs coil box front plate. $85 plus flat rate shipping.
USA only.

Last post

Please re-post

8 Replies

2517 Views

Last post by John iaccino
Mon Sep 09, 2024 9:51 am
F-S ACCESSORY TIRE IRON AND WHEEL LUG WRENCH

Last post by John iaccino « Mon Sep 09, 2024 9:51 am
Replies: 4
by John iaccino » Sat Jul 27, 2024 3:56 pm

First post

Accessory tire irons and wheel lug wrenches from a garage in Ashokan, NY. Also fits head bolts. Surface rust only. On has sticky surface from being taped. Rare, hard to find. $50 pair plus shipping. USA only.

Last post

Please re-post

4 Replies

2625 Views

Last post by John iaccino
Mon Sep 09, 2024 9:51 am
F-S RE-BUILT 6 VOLT STARTER

Last post by John iaccino « Mon Sep 09, 2024 9:50 am
Replies: 4
by John iaccino » Tue Aug 13, 2024 6:48 am

First post

Re-built 6 volt starter for sale. Bought in Carlisle as rebuilt and never used. I no longer have need for it and will sell it for what I paid. Will add picture later today. $275 plus shipping. USA only.

Last post

Please re-post

4 Replies

1605 Views

Last post by John iaccino
Mon Sep 09, 2024 9:50 am
TT rear axle hubs

Last post by TRDxB2 « Sun Sep 08, 2024 9:56 pm

by TRDxB2 » Sun Sep 08, 2024 9:56 pm

Sold in pairs price + shipping (think USPS Flat Rate may be best way, will calcualte least cost)
All key ways look very good as do the threads. I'm planning to wire brush the threads and do a hub cap fit

--
Brown Patina $115
--
used TT rear hubs.jpg
--
IMG_6399.JPG
--
--
--
Gray (almost look NOS) $200
gray TT hubs.jpg
--
IMG_6396.JPG

0 Replies

961 Views

Last post by TRDxB2
Sun Sep 08, 2024 9:56 pm
For sale 1926-7 gas tank with straps. Sold

Last post by Burlingtontguy « Sun Sep 08, 2024 9:35 pm
Replies: 3
by Burlingtontguy » Thu Sep 05, 2024 9:08 pm

First post

I have a nice 26-7 gas tank with straps and rubber gromets, $150 plus shipping Call or e-mail for pictures, Thanks, Dennis 401-932-3191.

Last post

to the top

3 Replies

1160 Views

Last post by Burlingtontguy
Sun Sep 08, 2024 9:35 pm
FS more 1909-10 hubcaps

Last post by KimDobbins « Sun Sep 08, 2024 8:52 pm

by KimDobbins » Sun Sep 08, 2024 8:52 pm

2 repo hubcaps, nice , $25.00 each. 4 originals , all have issues. See pictures. All plus shipping. Kdmks AT att.net

0 Replies

1091 Views

Last post by KimDobbins
Sun Sep 08, 2024 8:52 pm
New E & J Carbide Generator Parts for sale

Last post by Bruce Compton « Sun Sep 08, 2024 7:19 pm
Replies: 5
by dryden » Mon Aug 26, 2024 9:11 am

First post

Up for sale is a bunch of reproduction E & J Carbide Generator parts, Ex the Late Bill Formby's business. We are just selling the parts off now.
There is E & J, but also Solar and Juno Brown parts as well,
if you are missing any little bits give us an email and we can look at what we have
Some parts include 10 E & J mounting brackets
E & J Locking...

Last post

I need just the base for a '14. PM me for availability and price. Bruce

5 Replies

2189 Views

Last post by Bruce Compton
Sun Sep 08, 2024 7:19 pm
FS 1914-16 brass hubcaps

Last post by KimDobbins « Sun Sep 08, 2024 3:51 pm
Replies: 5
by KimDobbins » Sat Sep 07, 2024 7:38 pm

First post

Brass hubcaps, 1914-16. Take your pick, no cracks, all are in good to better condition. $20 each plus shipping. Kdmks AT att.net.

Last post

sorry, all sold. I do have 1909-10 hubcaps for sale.

5 Replies

1564 Views

Last post by KimDobbins
Sun Sep 08, 2024 3:51 pm
Clutch Springs FS

Last post by Richard K « Sun Sep 08, 2024 1:06 pm
Replies: 1
by RVA23T » Sun Sep 08, 2024 12:45 pm

First post

Pending sold to RK
4 as pictured
$5.00 each or all 4 for for $15 plus shipping.

Last post

Email sent for Purchase of all 4 Spring's. Rich

1 Replies

708 Views

Last post by Richard K
Sun Sep 08, 2024 1:06 pm
Want to trade hood shelves

Last post by Nate22huckster « Sun Sep 08, 2024 12:34 pm

by Nate22huckster » Sun Sep 08, 2024 12:34 pm

I’d like to trade these low hood (17-22) hood shelves for a pair the later high hood (23-25) style. Looking for a nice set in similar condition to the ones I have. Not looking to sell, would really like to trade for the correct ones I need. I bought these at a swap meet thinking they were correct for my project but later realized they are not....

0 Replies

1037 Views

Last post by Nate22huckster
Sun Sep 08, 2024 12:34 pm
CLUTCH DRUMS FS

Last post by RVA23T « Sun Sep 08, 2024 12:23 pm
Replies: 1
by RVA23T » Sun Sep 08, 2024 12:22 pm

First post

Pending sold to Richard K

Have 3 $5.00 each or all 3 for $10.
All prices plus shipping cost. 3din.jpg
3dout.jpg
D1a.jpg
D1a.jpg

Last post

Drums 2 and 3

1 Replies

722 Views

Last post by RVA23T
Sun Sep 08, 2024 12:23 pm
FS Original Samson Lion Hand mechanical Horn (SOLD)

Last post by babychadwick « Sat Sep 07, 2024 7:57 pm
Replies: 2
by ThreePedalTapDancer » Wed Aug 07, 2024 9:30 am

First post

Original Samson Lion Hand Operated mechanical Ahooga Horn. Excellent condition. Nice nickel plating (not chrome)on bell, some very minor age patina, no dents. Push plunger to operate. Very loud, ready to mount and use. Nice era correct horn. 9.5 length, 5 inch diameter bell. 200 includes shipping.

IMG_1638.jpeg IMG_3487.jpeg

Last post

Email sent, hopefully it's still available

2 Replies

1660 Views

Last post by babychadwick
Sat Sep 07, 2024 7:57 pm
WTB 1912 running boards - Found

Last post by havnfun « Sat Sep 07, 2024 6:33 pm
Replies: 11
by havnfun » Fri Sep 06, 2024 11:46 am

First post

Howdy, I’m looking for a nice set of 1911-12 running boards, or simply a passenger/right side, if that’s all I can find

Thanks MTFCA

Last post

Howdy Frank,

Thank you!
Sent you an email !!

Joe

11 Replies

1897 Views

Last post by havnfun
Sat Sep 07, 2024 6:33 pm
FS Brown 110 Side Light Restorable SOLD!

Last post by rls120 « Sat Sep 07, 2024 6:28 pm
Replies: 4
by Rodger Erickson » Sun Aug 25, 2024 2:53 pm

First post

FS: One restorable Jno. Brown 110 lantern. It will need a total restoration, the burner is missing, there's a dent in the back, the reflector plating has worn off, and the glass will have to be replaced. On the plus side, the top, while not perfect, is better than probably 80% of the Jno. Brown lights I've seen. Also includes a fount that is not...

Last post

Arrived in good order today, very carefully packed. I'm quite happy with this purchase.
Thank you, Rodger!

4 Replies

1159 Views

Last post by rls120
Sat Sep 07, 2024 6:28 pm
Tobin Arp Mic FS

Last post by Dan Hatch « Sat Sep 07, 2024 4:06 pm
Replies: 4
by Dan Hatch » Sat Aug 31, 2024 3:27 pm

First post

Here is an extra to me TA14/15 mic for sale. This is a direct read mic, no math to do with it. Range is 1.2 inches to 3.4 inches.
It is made by some small company in MA. You may have heard of them Starrett. They made these just for Tobin Arp. It will work with any boring bar that is 1 1/8” dia. These were also for the SB,SBA and RA bearing...

Last post

Back to the top

4 Replies

1620 Views

Last post by Dan Hatch
Sat Sep 07, 2024 4:06 pm
S shaped intake SOLD

Last post by Craig Leach « Sat Sep 07, 2024 3:18 pm
Replies: 1
by Melba Nolan » Sat Sep 07, 2024 10:38 am

First post

For sale: alum S shaped intake $25 plus postage
20231224_143842.jpg

Last post

PM sent
Craig.

1 Replies

938 Views

Last post by Craig Leach
Sat Sep 07, 2024 3:18 pm
fan bracket 1913/1916 and pinion

Last post by Melba Nolan « Sat Sep 07, 2024 1:12 pm
Replies: 3
by Melba Nolan » Fri May 24, 2024 9:06 pm

First post

20220624_171643.jpg
For sale: Fan bracket #T604 with Ford script $30 plus postage

11 tooth pinion with Ford script $100

Last post

move to top

3 Replies

1462 Views

Last post by Melba Nolan
Sat Sep 07, 2024 1:12 pm
WTB…..Muncie shift knob

Last post by ModelTWoods « Fri Sep 06, 2024 10:45 pm
Replies: 6
by WorldChamp1914 » Sat Aug 24, 2024 1:20 pm

First post

Kind of grainy looking.

Last post

Gary, post the thread size and the O.D. of the ball. I have one but I wouldn't know if it were the right size without the measurements.

6 Replies

1972 Views

Last post by ModelTWoods
Fri Sep 06, 2024 10:45 pm
WARFORD & MUNCIE PARTS: SOLD

Last post by Richard K « Fri Sep 06, 2024 6:18 pm
Replies: 1
by SIR TIMOTHY » Thu Sep 05, 2024 10:54 pm

First post

IMG_1628.jpg IMG_1627.jpg IMG_1632.jpg
I have a Muncie transmission case and a Warford case with a pile of parts, all $150 plus shipping. tim 21303.jpg

Last post

Hi Tim, I would like to but your Muncie and Warford parts. Email sent. Thanks Rich

1 Replies

893 Views

Last post by Richard K
Fri Sep 06, 2024 6:18 pm
WTB Gasoline Sediment

Last post by SurveyKing « Fri Sep 06, 2024 11:30 am
Replies: 3
by SurveyKing » Wed Sep 04, 2024 10:57 pm

First post

I would like to purchase either outright or with core exchange if needed, one serviceable Sediment Bulb for 1924. This would be part number 2902B. The handle must turn and not leak. Thanks. Please email to Danielsnell2@twc.com with photos.

Last post

I have located one. Thanks MTFCA

3 Replies

1251 Views

Last post by SurveyKing
Fri Sep 06, 2024 11:30 am
Roadster body to Northern California.

Last post by Michael Paul « Thu Sep 05, 2024 10:54 pm
Replies: 1
by Michael Paul » Wed Sep 04, 2024 5:38 pm

First post

Hi all, I have a roadster body in the San Diego area I need to have shipped to Northern California. I'm about an hour north of Sacramento, but I can drive and meet someone along the way. I-5, I-80..or 395 on the eastern side of the Sierra mts.
Glad to pay for your time and fuel.
Any help appreciated.
Thanks , Michael
Seven zero seven 486-8420

Last post

Should easily fit in a pickup bed

1 Replies

1027 Views

Last post by Michael Paul
Thu Sep 05, 2024 10:54 pm
WTB: One narrow cotton band liner

Last post by rls120 « Thu Sep 05, 2024 8:50 pm
Replies: 12
by rls120 » Mon Aug 26, 2024 7:03 pm

First post

Does anybody have just one NOS narrow cotton band liner? My brake band is toast, but the 1 and reverse bands are in great shape, and I really would rather not have to switch the transmission over to kevlar or wood.

Thanks for your consideration.

Bob
rschroen_61@yahoo.com

Last post

Got the new band liner from Craig today: what a great guy to deal with! Thank you.

Bob

12 Replies

2451 Views

Last post by rls120
Thu Sep 05, 2024 8:50 pm
FS 12-13 Wood Slant Top KW Coilbox (SOLD)

Last post by ThreePedalTapDancer « Thu Sep 05, 2024 7:26 pm
Replies: 1
by ThreePedalTapDancer » Thu Sep 05, 2024 7:25 pm

First post

Reproduction 1912-13 slant top wooden coilbox. This coilbox is designed to hold the common later coils. It has a nice original 1913 KW switch, new faceplate, and new copper contacts, posts and insulators. New solid core wiring. It comes with two options for mounts, the installed and easily removed mounts that use 1/4 thread studs, and a pair of...

Last post

IMG_1775.jpeg

1 Replies

983 Views

Last post by ThreePedalTapDancer
Thu Sep 05, 2024 7:26 pm
(SOLD) Original Iron Sediment Bowl

Last post by SurveyKing « Thu Sep 05, 2024 2:40 pm
Replies: 5
by WaltM » Sat Mar 23, 2024 4:37 pm

First post

For Sale original iron sediment bowlhanks, Waltt

Last post

Email Sent.

5 Replies

2187 Views

Last post by SurveyKing
Thu Sep 05, 2024 2:40 pm
WTB Piece of old leatherette

Last post by Allan « Wed Sep 04, 2024 11:39 pm
Replies: 4
by Belliott3 » Thu Aug 29, 2024 7:10 pm

First post

Sounds weird, but I need a scrap of old leatherette to patch a hole in the original upholstery on my 1916T. I know most people toss the old upholstery when replacing it, but you never know with T people: someone out there is bound to have some aged leatherette laying around!

Last post

That will be the problem. Trying to fit a new patch to really old material is not likely to hold up in use if it is in a place where there is any movement/stretch is involved. The old stuff gives up in places, and the nearby bits are just as fatigued/decayed, so repairs may only be cosmetically effective. There is nothing wrong with making such...

4 Replies

1645 Views

Last post by Allan
Wed Sep 04, 2024 11:39 pm
WTB Add on Alternator for 1918

Last post by t-time « Wed Sep 04, 2024 11:05 pm
Replies: 1
by tom_strickling » Wed Sep 04, 2024 3:57 pm

First post

I am looking for a Texas T/Bird Haven add on alternator kit, or at least the bracket for my 1918 touring. Please let me know if you have one to sell or at least a bracket to borrow so I can get one made. I called, they don't have em.

Last post

Chaffin's has kits in stock.

1 Replies

876 Views

Last post by t-time
Wed Sep 04, 2024 11:05 pm
FS BUMPER MEDALLIONS (SOLD)

Last post by Mark Chaffin « Wed Sep 04, 2024 7:59 pm
Replies: 1
by Mark Chaffin » Wed Sep 04, 2024 1:39 pm

First post

Two used front bumper medallions. Price for the pair is $20 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240904_100822.jpg

Last post

Sold to Rick. Thank you

1 Replies

803 Views

Last post by Mark Chaffin
Wed Sep 04, 2024 7:59 pm
FS BRASS GREASE CUPS (SOLD)

Last post by Mark Chaffin « Wed Sep 04, 2024 7:58 pm
Replies: 1
by Mark Chaffin » Wed Sep 04, 2024 1:43 pm

First post

One lot of six brass grease cups for the rear axle and driveshaft. These are no longer available from the vendors. When available, they were $9.95 each. Get this lot of six for $50 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240904_100829.jpg

Last post

All sold. Thank you

1 Replies

782 Views

Last post by Mark Chaffin
Wed Sep 04, 2024 7:58 pm
FS GENERATOR PARTS SOLD

Last post by Mark Chaffin « Wed Sep 04, 2024 7:57 pm
Replies: 1
by Mark Chaffin » Wed Sep 04, 2024 1:51 pm

First post

One lot of generator parts as follows: (3) Gears, (1) Band Cover, (1) Set of Bearings, (2) Brush Sets, (1) Brush Assembly. All parts are NOS or NROS. The cover bands are no longer available from the dealers. Retail value is $200. The entire lot is yours for $100 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240904_100636.jpg...

Last post

All sold. Thank you

1 Replies

757 Views

Last post by Mark Chaffin
Wed Sep 04, 2024 7:57 pm
FS OIL PAN DRAIN PLUGS (NOS) SOLD

Last post by Mark Chaffin « Wed Sep 04, 2024 7:57 pm
Replies: 1
by Mark Chaffin » Wed Sep 04, 2024 1:58 pm

First post

Ten oil pan drain plugs NOS. Reproductions are $4. Get this lot of ten pieces for $25 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240904_100740.jpg

20240904_100816.jpg

Last post

All sold. Thank you

1 Replies

755 Views

Last post by Mark Chaffin
Wed Sep 04, 2024 7:57 pm
FS TIE ROD BOLT SETS (NOS) SOLD

Last post by Mark Chaffin « Wed Sep 04, 2024 7:56 pm
Replies: 1
by Mark Chaffin » Wed Sep 04, 2024 2:07 pm

First post

I have five tie rod bolt sets (17-27) available for purchase. They are NOS. Reproduction sets retail for $30. Get these for $25 per set. Purchase several sets and save on shipping ($8.50 USPO Flat Rate). Mark Chaffin (951) 805-0928

20240904_095312.jpg

Last post

All sold. Thank you. :)

1 Replies

781 Views

Last post by Mark Chaffin
Wed Sep 04, 2024 7:56 pm
For Sale: Walden Worcester wrench lot

Last post by Ed Fuller « Wed Sep 04, 2024 5:53 pm
Replies: 3
by Ed Fuller » Fri Aug 23, 2024 5:21 pm

First post

This is a lot of 6 Walden Worcester Model T era wrenches. Walden made wrenches and tool sets for Model T Fords and other manufacturers. These are great for display or for working on your T!

Here are the wrench numbers:
1620
2418
5810 (two different styles)
624
5660

$25 plus $10 shipping in the U.S.A.

IMG_4882.jpeg

IMG_4883.jpeg

Last post

Wrenches are sold.

3 Replies

1548 Views

Last post by Ed Fuller
Wed Sep 04, 2024 5:53 pm
For Sale: Large Lot of Glass Lenses

Last post by Ed Fuller « Wed Sep 04, 2024 5:52 pm
Replies: 2
by Ed Fuller » Tue Sep 03, 2024 7:20 pm

First post

This is a large lot of NORS glass lenses for sidelights and taillights. There are 63 total lenses. Some have some rough edges but it won’t show once installed in the lamp.

16 square clear lenses (3 7/8” square x 1/4” thick)
29 round clear lenses (3 3/4” diameter x 1/4” thick)
18 round green convex lenses (4” diameter)

$150 plus shipping in the...

Last post

Lenses are sold.

2 Replies

1175 Views

Last post by Ed Fuller
Wed Sep 04, 2024 5:52 pm
FS PAN SUPPORT BRACKET SET (SOLD)

Last post by Mark Chaffin « Tue Sep 03, 2024 5:45 pm
Replies: 3
by Mark Chaffin » Thu Aug 29, 2024 6:10 pm

First post

Pan support bracket sets. I have three sets available. Purchase several sets and the shipping remains the same. Sandblasted and ready for paint. Price is $30 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240829_140256.jpg

Last post

Going to Kevin. :)

3 Replies

1531 Views

Last post by Mark Chaffin
Tue Sep 03, 2024 5:45 pm
FS: Brass Steam Oiler for Traction Engine or Locomotive

Last post by George House « Tue Sep 03, 2024 7:00 am
Replies: 2
by George House » Wed Aug 28, 2024 10:19 am

First post

When disassembling for polishing, I found no internal oil residue and 2 wooden knobs have a ‘sheen’ implying no or very little use. NOS ?? Only $160 + USPS medium flat rate box. … gwhouse731(at)gmail(dot)com

Last post

This’ll be the only ‘back to top’ until this item drops into obscurity :o(

2 Replies

1410 Views

Last post by George House
Tue Sep 03, 2024 7:00 am
Wire Wheels Barter Swap Three Budd Wire Wheels and hubs, trade for PASCO

Last post by amesbuilt « Tue Sep 03, 2024 2:50 am
Replies: 6
by amesbuilt » Wed Jul 26, 2023 9:23 am

First post

Time to venture back to the shed and dig through those extra wire wheels sitting there. I have three Budd wheels with hubs and looking to swap for PASCO wheels. Wheel centres are OK rims fair to unusable.
One left side hub and hub cap
One right side hub and hub cap (reverse thread)
One left side hub missing cap.

Figure to swap at fall Hershey as...

Last post

Packing for Hershey 2024. Any trades out there?

6 Replies

1656 Views

Last post by amesbuilt
Tue Sep 03, 2024 2:50 am
Wire Wheel Barter Swap Hayes Wire Wheel front hub trade for PASCO

Last post by amesbuilt « Tue Sep 03, 2024 2:48 am
Replies: 2
by amesbuilt » Wed Jul 26, 2023 9:18 am

First post

Time to venture back to the shed and dig through those extra wire wheels sitting there. I have one Hayes front hub with no spokes or rim. Looking to swap for a PASCO wheel.

Figure to swap at fall Hershey as any kind of shipping for these things is getting pricey.

Last post

Packing for Heshey 2024. Any traders out there?

2 Replies

1038 Views

Last post by amesbuilt
Tue Sep 03, 2024 2:48 am
Barter Swap Two HOUK Wire Wheels trade for PASCO

Last post by amesbuilt « Tue Sep 03, 2024 2:46 am
Replies: 2
by amesbuilt » Wed Jul 26, 2023 9:14 am

First post

Time to venture back to the shed and dig through those wire wheels sitting there. I have two Houk and looking to swap for PASCO. Wheel centres are OK rims fair. I think the Houks are Model 2 see measurement on photo. Figure to swap at fall Hershey as any kind of shipping for these things is getting pricey.

Last post

Loading for Hershey 2024. Any barterers out there?

2 Replies

1091 Views

Last post by amesbuilt
Tue Sep 03, 2024 2:46 am
Barter Swap one Frayer Phelps Wire Wheel trade for PASCO

Last post by amesbuilt « Tue Sep 03, 2024 2:43 am
Replies: 7
by amesbuilt » Wed Jul 26, 2023 8:30 am

First post

Time to venture back to the shed and dig through those wire wheels sitting there. I have one Frayer / Phelps dental drive and looking to swap for PASCO. Wheel centre is OK rim fair. The hub has damage with a build up of brazing to repair it. Figure to swap at fall Hershey as any kind of shipping for these things is getting pricey. IMG_3067.JPG...

Last post

Loading for Hershey 2024. Any trades?

7 Replies

1915 Views

Last post by amesbuilt
Tue Sep 03, 2024 2:43 am
Scam Alert

Last post by QuestQuencher « Mon Sep 02, 2024 10:13 pm
Replies: 1
by rls120 » Sun Sep 01, 2024 8:26 pm

First post

I got scammed by an individual calling himself 'bobby Cornerstone' after posting a WTB here on the forum. My bad for trusting AND probably for posting my personal email address. . . . . . . .

Last post

That sucks, man. I’m sorry to hear you got scammed. It’s always tough when trust gets taken advantage of like that. Stay cautious and good luck getting things sorted out.

1 Replies

1159 Views

Last post by QuestQuencher
Mon Sep 02, 2024 10:13 pm
WTB: Front Fender Brackets

Last post by J1MGOLDEN « Mon Sep 02, 2024 6:33 pm
Replies: 3
by J1MGOLDEN » Mon Sep 02, 2024 2:42 pm

First post

WTB: A pair of the larger Front Fender Brackets that are not included with new repro fenders.

CAUTION: Do not trash old fenders with those brackets left in place!

Jim Golden - Bowie, Maryland

Last post

Karl, they were needed on a 1920 Huckster.

3 Replies

1063 Views

Last post by J1MGOLDEN
Mon Sep 02, 2024 6:33 pm
FS - Horns (Parts) - SOLD

Last post by TheSaintDiscJockey « Mon Sep 02, 2024 11:52 am
Replies: 1
by TheSaintDiscJockey » Mon Sep 02, 2024 9:59 am

First post

Two horns. Parts?
Do they work? Don't know. Just sitting around the shed.

$15.00 for both?
Plus shipping.

Text at six zero 9 - 9 two zero - four two two 0.
Or, pm.

Thanks for looking. 20240902_094843.jpg

Last post

Sold to John.

1 Replies

834 Views

Last post by TheSaintDiscJockey
Mon Sep 02, 2024 11:52 am
Wanted 8" brake parts

Last post by Mark Gregush « Mon Sep 02, 2024 10:55 am
Replies: 2
by Nv Bob » Sun Sep 01, 2024 11:57 pm

First post

Need a good usable 8 brake lined brake shoe
For my Auto Red Bug
Also looking for silent chain and pockets for 24-26 Dodge
Thanks in advance
Bob

Last post

What Allan says is correct. If this is something non stock, we would need photos.

For the silent chain:

or

As a Dodge Brothers owner (1920 touring), not sure what you mean by pocket? Is this a truck and talking about the flat bed pocket?

2 Replies

1104 Views

Last post by Mark Gregush
Mon Sep 02, 2024 10:55 am
WTB Bosch Magneto Drive cover plate and gear

Last post by Mark Herdman « Mon Sep 02, 2024 4:09 am
Replies: 4
by Mark Herdman » Sat Aug 31, 2024 7:58 pm

First post

Wanted, gear and plate to suit Bosch Magneto drive that replaces Generator for Mike Bender. Whole unit would is ok too.

Thanks

Mark

Bosch plae gears.jpg

Last post

Thanks Dan

I probably will need one down the track. Will chase you up.

Mark

4 Replies

1304 Views

Last post by Mark Herdman
Mon Sep 02, 2024 4:09 am
Wtb universal whitewall tyre

Last post by Lawrence « Sun Sep 01, 2024 5:38 pm
Replies: 2
by Lawrence » Tue Aug 27, 2024 4:54 am

First post

Hi, does anyone have one or two of these old universal whitewall tyres 30x3.5 they could sell me please. I have one tyre with a quarter of the tread already down to bottom of tread as rubber brittle. Someonemust have an old one in their shed. Thanks guys. Chris NZ

Last post

Hi larry, very interested. Please send photos. Thanks Chris

2 Replies

1200 Views

Last post by Lawrence
Sun Sep 01, 2024 5:38 pm
FS AC brakes

Last post by KimDobbins « Sun Sep 01, 2024 5:36 pm
Replies: 2
by KimDobbins » Sat Aug 31, 2024 8:02 pm

First post

AC break parts , all are original this is all the parts I have. 1 of the parts has been repaired. $200 for all plus shipping. Kdmks at att.net.

Last post

Sold to Charlie

2 Replies

1362 Views

Last post by KimDobbins
Sun Sep 01, 2024 5:36 pm
WANTED: Any WWI or early militaria items

Last post by modeltspaz « Sun Sep 01, 2024 2:27 pm
Replies: 5
by signsup » Sun Aug 25, 2024 2:49 pm

First post

Got the ambulance complete enough to start the display and event season. But it can always use some bells and whistles. I have two WWI helmets painted with white circles and red crosses, but can always use fire extinqushers, haversacks, ammo boxes (wooden), uniform itesm, medical items, etc. Not asking to sell family heirlooms, but there might be...

Last post

They were originally fork mounted, like T style acetylene headlights.
Those were probably originally used as headlights on a large truck, such as a Jeffery/Nash or FWD Quad or a Liberty truck.

5 Replies

1815 Views

Last post by modeltspaz
Sun Sep 01, 2024 2:27 pm
For Sale: Cast Aluminum Carburetor Heat Pipe

Last post by Ed Fuller « Sun Sep 01, 2024 2:20 pm
Replies: 2
by Ed Fuller » Wed Aug 28, 2024 8:23 pm

First post

This is a really neat cast aluminum carburetor heat pipe made by Motor Invention Co in LaCrosse, Wisconsin.

It has some fins inside that were meant to swirl the intake air. I was going to grind out the fins and use it on my speedster. I thought it would look cool all polished up. I’m currently running a Stromberg on my speedster instead of an NH...

Last post

Pipe is sold

2 Replies

1333 Views

Last post by Ed Fuller
Sun Sep 01, 2024 2:20 pm
FS: Accessory Anti-Theft Devices for MotoMeters $30 Both

Last post by Richard K « Sun Sep 01, 2024 12:51 pm
Replies: 1
by Rodger Erickson » Sun Sep 01, 2024 12:16 pm

First post

FS: Here's an accessory I've never seen before - these are anti-theft devices for Moto-Meters that slide down into the radiator neck then anchor in place. One of them comes with a bushing to size the threads down for a Junior Moto-Meter as used on Model T's. Apparently the Good Old Days weren't all that good if you had to worry about some...

Last post

Hi Rodger, I would like to buy both of your devices. Thanks Rich

1 Replies

938 Views

Last post by Richard K
Sun Sep 01, 2024 12:51 pm

New Topic

10458 topics

Page 40 of 105
- Jump to page:
Previous
1
…
38
39
40
41
42
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum