MTFCA Forum

Here is Gear #2. It has .003 on one side and std on the other. Not sure what that all means. Anyway $20.00 + shipping will get it too. Email me at address in pictures. Dan

Here is Gear #3. $20.00 + shipping. Email me at address in pictures. Dan

New is a new Nylon timing gear. It is standard. $45.00 + shipping. Email me at address in pictures. Dan

Here is a new fiber timing gear. It was in some stuff I got. $20.00 + shipping. Email me at address in pictures. Dan

Here is a 26/27 gas cutoff. $25.00 + shipping. Email me at address in pictures. Dan

Here is a 26/27 Radiator Lower Shield. $30.00 + shipping. Look at pictures. Email me at address in pictures. Dan

Here is a split rim for sale. Not sure what it fits maybe TT rear? I will take $75.00 + shipping for it. Or you can pickup at Hershey if paid for. Email me at address in pictures. Thanks Dan

Early close spool was in a 12 rivit rear end
This different then the later closed spool
Can send more pics sleeve bearing and thrust ball bearing in cluded
$100+ postage

2 ATWATER KENT AT Distributors, one complete and another for parts (although it doesn't appear that it would take much work to complete it). Extra set of gears. Working condition unknown, no tested, as found. $150 for the pair including shipping in the CONUS.

IMG_1295.JPG
IMG_1296.JPG
IMG_1297.JPG
IMG_1298.JPG
IMG_1299.JPG

My sale of all my collection of Model T & A parts, tools accessories ,as well as other auto related items continues . I am still offering 30% OFF the listed price on my current list. All the items are in good condition. Many have been restored , cleaned or painted & ready to install. If you don't have my list yet, just send me an email ,and I'll...

Running board spare mount. Not sure if Ford issue, but it looks to be factory made. $100 can deliver to Hershey. Frank Iaccino 518-755-0986[IMG_6919.JPG

A matched pair both in good condition. No dents and the lamp bases move freely. The wick elements move freely as well.

Lamps are identical, an exact match
Complete and in good condition
No dents anywhere on the lamps
Any rust pitting is very light
All glass is good with no cracks or breaks
Lens doors open and close smoothly with good spring...

Very nice original Rajo model B intake manifold. Never repaired and does not need a thing!

Guessing 11-12 column tube case base bottom right hole offset ? Tell me why they did this?
Plus
have base of the top brass case control rods out but still rivited make an offer
Jalopyt@yahoo.com

Ford script hub puller, $45.00, Ford script pliers $25.00 each, Bent angle wrenches $50.00 set, Ford socket set, $50.00, Universal adjustable hub cap removal tool, $50.00, Duro socket set, $20.00. All plus shipping, bundle and save with flat rate. Email if interested.

IMG_1983.jpg
IMG_1987.jpg
IMG_1982.jpg
IMG_1986.jpg
IMG_1990.jpg...

Complete, Your choice, $50.00 each plus shipping. Email if interested.

IMG_2038.jpg
IMG_2037.jpg

All the Best,

Hank

Here's a nice set of restored solid original headlights, script buckets, lens, bulbs & nice bright reflectors. $200 plus shipping or best offer. Located in Oswego, IL 60543. Text Jim at 630-935-8561 or email anteekguy97@aol.com

Pictures show the condition of the parts, far from like new but some useable, rebuildable or for spares ? $250 includes shipping in the CONUS (large flat rate box). Thanks

IMG_1321.JPG
IMG_1322.JPG
IMG_1323.JPG
IMG_1324.JPG
IMG_1325.JPG

Cleaned up an S4BF tonight, it's for sale but not done yet. I mounted it on a standard Zenith manifold and also on another manifold for an even cooler look IMHO! It will bolt right on and run fine, might not work with a stock generator but you are probably either not going to run a generator or will be running one of those little 6V alternators...

There is really no rust just the treatment process comes out brown sometimes depending on humidity. Your pick of any, $8.00 each. Please specify by the sizes I have as not all part numbers are visible. Email if interested, as stated before, bundle and save on flat rate shipping!

IMG_2009.jpg
IMG_2008.jpg
IMG_2007.jpg
IMG_2005.jpg...

Your choice, $25.00 each plus flat rate shipping. Do not have the handle for the Rees. Email if interested, bundle and save.

IMG_1989.jpg

All the Best,

Hank

Nice ole girl and works well, $100.00 plus shipping. Email if interested.

IMG_2015.jpg

All the Best,

Hank

Nice rim Splitter in the box even, $50.00 plus shipping. Again, bundle and save, email if interested.
IMG_1984.jpg

Tool Bags, Your choice, $10.00 each plus shipping.
IMG_1985.jpg

Serviceable slip joint pliers, Your choice $5.00 each plus shipping. Top row does not have any marks but appear to be of quality.
IMG_1997.jpg

Pressed steel...

Monkey Wrenches, Use item number when requesting please, Email if interested, bundle and save.

IMG_1991.jpg
Any of these, $7.00 each plus shipping.

IMG_1992.jpg
Any of these, $10.00 each plus shipping.

IMG_1993.jpg
Any of these, $20.00 each plus shipping.

IMG_1994.jpg
Fordson? Any of these, $5.00 each plus shipping.

IMG_2011.jpg...

Posting for a friend
1915 touring, Layne warlord,wire wheels sure stop disc brakes
Located in Nc 19000
Steve 337-902-1108 F3D979F1-F74C-4D81-A568-8

Nice fully polished RAJO engine side cover, never used and perfect condition, $45, domestic postage $18.

I have a pair of nearly perfect 1924 sedan rear fenders for sale. I will bring to Hershey if necessary. $300 pair. Frank Iaccino 518-755-0986. C4Y-34 North Chocolate Field.

I'm looking for a pair of unused or gently used Rootlieb front fenders for my 1910 T with no metal work required.

I will post this in the classifieds as well
Bob's Antique Auto Parts is going into the manufacturing and wholesale full scale and all the retail items in stock that we do not make will be sold at very low prices
used items we will still carry but these will also be on the sale
if you are selling at Hershey stop by on the way and load up and sell...

Offered is a pair of Macbeth headlight lens. These are not model T size, but almost. Looks to me like if you have a pair of rings you could massage a bit, they would work. If you are using something else on a speedster or a different make car, you could be in luck. Bargain price of $60. Tmorsher@icloud.com to reach me. Thanks!...

Offered here is a pair of Gibson Glareless headlight lens. These are really beautiful, and come with an original box and what’s left of a bug eaten advertising sheet. Sorry, no bugs included. These were an old store find in Lorain county Ohio, just beautiful and well made. I had a large quantity of these many years ago, and this is all that’s...

I know that this is quite off topic but I know that a lot of the folks here also have interest in early Ford V8's. I'm in need of a nice set of exhaust manifolds for a 60 h.p. V8. If anyone has a set for sale, please PM me. Thank you.

Title says it all. I’m looking for a good set of door latches for a 1927 closed cab TT truck. Pm,email, call or text. I do PayPal,check and money order.

Brad
Bkirtner@gmail.com
5407612three03

Nice Stewart Speedometer gear and drive unit In excellent condition, the gears turn freely and smoothly. No grease in the cup - it's obviously been thoroughly cleaned and rebuilt.

#1913 is RH - 2 & 1/2 to 1 ratio - Model T and a bunch of other cars that have the drive on the passenger side (RH)

Tooth Ratio is 16:58

$250 OBO. USPS Shipping is...

I'd like to buy two of the second from the bottom running board brackets, or two like the picture showing just one.

Please send me a picture or two at bill.everett@epickett.com

Thanks.

Just bought a 14 Touring. Now missing one of these valve stems.

I have a very nice running chassis. I’ve been selling off all of my previous project to focus on putting together a 17-25 runabout. I am in need of a body for this project. I do prefer the early low radiator years but will be very happy with whatever is available in excellent or very good condition. I plan to build the rest of the car to suit the...

Rajo 1926 4 177 Model C Ford racing head Zenith ST4B !!!!!!!!!!

Doesn't get are rarer or harder to find that this one!! And! It is in MINT original condition.

Rajo must have thought this was the best they could get if they sold it along with the C Rajo!!

This was Zenith's successor to the S4BF. They went from bronze construction with the...

All brass cable that needs a bunch of TLC including perhaps new cable housing. correct original 1910 and 1911, empty inside. $85, domestic postage $12.

I have 3 rebuilt engines, 1923 # 8086586, 1922-24 # ? both running and ready to go , $3,800 for 808------, $2,800, for the 2nd, 1913 Short block $ 2,500 new rings & babbit, Early bare blocks,1912 -- $1275, 1917---$950, Call with questions, 401-932-3191, Thanks, Dennis

Here is an original set. I was thinking of keeping this, but want to raise money for a ECCT. I am asking $350 plus shipping for this original item. Note: This is missing one clamp that connects to the windshield bracket. If you don’t want the glass it should easily fit in a flat rate box ($13). Please Send me an email if you are interested....

I will post this in the forum section as well
Bob's Antique Auto Parts is going into the manufacturing and wholesale full scale and all the retail items in stock that we do not make will be sold at very low prices
used items we will still carry but these will also be on the sale
if you are selling at Hershey stop by on the way and load up and sell...

Marked Jones and will work on all the Ford Special setups, small gear is new reproduction nicely made ( center of the gear is brown fiber, you can paint both faces black), $75 pair, domestic postage $8.

Neat accessory, convert the standard grease cup to an Alemite fitting by simply removing the original cup and screwing these in their place. 5 small fittings and one slightly larger. $35 shipped in the CONUS

alemite.jpg
IMG_1311.JPG
IMG_1312.JPG
IMG_1313.JPG
IMG_1314.JPG

I have model B exhaust manifold with a model A intake and rebuilt carburetor setup. Had it running on my T but decided to put it back to stock. The setup comes with a new muffler and exhaust pipe professionally bent to make sure it does not hit the frame since it is larger than a stock T. The carburator has an adapter to take the carburator in...

I have a pair of 20-22 ( I believe ) lower windshield stanchions.

$60 plus shipping.

I can't figure out how to quickly ad photos. I can email them.

Please email directly: estrangedcc@gmail.com

I have KR Wilson Line boring plate for Model T and A with false cams pouring fixtures for blocks, boring bars with extra cutters, standard reamers 3,2 for the A's other pouring fixtures for rods and main caps for T,A both. Price is 500 a set and could deliver to Hershey if of interest. Thanks! Joe Bell 419-618-1025 Tiffin Ohio

IMG_6504.JPG

K.R. Wilson Quick Detachable Main Bearing Bolt Set. Original set of KRW Quick Bolts, $300, shipped anywhere in the United States. This is an original set of quick bolts. There are no problems with the nuts or the threads nor to the wrenches and there is no damage of any kind. If you have any questions or would like to see any other...

I have a couple of blocks the look to be in fairly good shape have been stored inside.

1927-27 Ford Model T Vaporizer Carburetor with Exhaust and intake manifolds On Ebay

Here is another 26/27 gas cutoff. $25.00 + shipping. Email me at address in pictures. Dan

Here are some NOS outer cone races for sale. $2.50 each+ shipping. Have both sides. Email me at address in pictures.

Muffler: 2 Cast Iron ends, rod and the innards as shown in this listing

$50 plus the ride to you.

The box weighs 8.5 pounds and is 17.5 x 5.5 x 5.5 you can calculate shipping to you.

Rumor has it that new sets are now available from a guy named Mike who makes them...and they are expensive. But if you need them you need them, and they should last a lifetime!

A very nice, complete magneto front drive. ANY standard 4 cylinder magneto works on this. Appears to be a very low use unit, it has the ball bearing shaft, and the spring loaded gears for very easy setup. Complete with cam Nut, and also BOTH ENDS of the magneto coupling. This is the coupling that is very easy to move a notch or two for easy...

Very rare Stewart speedometer wrench for 1911 pinion drive gear. $125.00. Postpaid. kdmks AT att.net.

2 DELCO clip on style distributors. One complete distributor missing only the rotor, the second for parts. Includes the often-missing drive gear. Working condition is unknown as found condition. $130 includes shipping in the CONUS

IMG_1286.JPG
IMG_1287.JPG
IMG_1288.JPG
IMG_1289.JPG
IMG_1290.JPG

Solex VW downdraft carburetor fitted to a Model T intake manifold. Older home-made set-up. Carburetor has automatic choke. Probably needs to be rebuilt. $100 plus flat rate shipping.

Stromberg LF carburetor. Mounting holes fit Model T manifold. Needs rebuild. $75 plus flat rate shipping.

15 pieces in as found condition, used only one year 1922? $75 including shipping in the CONUS
IMG_1282.JPG
IMG_1283.JPG
IMG_1284.JPG
IMG_1285.JPG
Screen Shot 2019-09-15 at 7.38.55 PM.png

20 pieces #2846B rim clamps and 5 #2848 Nuts. Unsorted for condition as found. Retail for these parts new is approx. $350. Yours for 1/4th that price at $90 including shipping in the CONUS.

IMG_1279.JPG
IMG_1280.JPG
IMG_1281.JPG

Nice early acetylene 11 dia light. Steel body with brass bonnet . Brass has a small dent but is easy to reach to bump out . There is a strap riveted to the mounting bracket that will be easy to remove . Glass reflector is very nice with a very minor chip by one of the clips silver is in great condition. $200.00 plus shipping . Can deliver to...

Here is a list of larger parts from 1914 that I'm selling. Headed to Hershey and can also ship.
If you are interested just PM me and I'll send pictures tomorrow and make me a fair offer.

1) round gas tank original in fair condition. No dents but might be pin holed
2) 14 windshield . Complete, no glass, lead filler strip mostly there. Light rust....

Rare Holmberg hood and radiator shell for making the brass era T look much more modern. Generally in good condition with maybe a minor corner bend or dink somewhere,no rust issues. Decent cloisonne' emblem says Holmberg Manufacturing San Francisco,Calif,Quality and Design. The little plate on the back side is partly readable,says Irvine &...

It will need some soldering back together but the detail is very good and it is numbered. It may need minor straightening and will need a crack repair on one end. I don't know the exact year. I'm looking for best offer,pay by check or paypal. Please PM me if interested.

Like the title says, have no idea what they fit, what you see is what you get. 7 pieces in total. $50 includes shipping in the CONUS

IMG_1307.JPG
IMG_1308.JPG
IMG_1309.JPG
IMG_1310.JPG

Front & rear axle $7000.00 (SHOWN)

Oil pan (wide) 1 piece $3500

Frame with brackets $3500

1911 open valve motor - $7,500.00 - photos available upon request.

narrow square hole transmission cover $1,000.00 for 1909 Ford

850.00 low head says FORD - does not say MADE IN USA

350.00 Southern Tread Front Axle - many many other model T parts for...

These are not Model T but are pretty neat. They could be used for a Speedster project or a brass era . Very solid condition and will clean up very nice. They are nickel plated with a brass finish. They might go to a Studebaker but not sure.
Asking $60 OBO plus shipping

Mike Bird

Call or Email
mikebird@lifeattheridge.net or 574-584-6744...

Just listed on t bay but would prefer a forum member to get this deal
here is a copy of the t bay ad
UP FOR SALE IS THIS MODEL T FORD 1927 TUDOOR SEDAN BODY WITH NEW CLASTIQUE UPHOLSTRY KIT, NEW TOP WOOD KIT
NEW PADS AND TOP MATERIAL
STRAIGHT BODY
DRIVERS DOOR WAS PROFFESSIONAL REPAIRED
GOOD GAS TANK AND SED, BULB
SEATS ARE ALL THERE WITH NEW...

I’m looking for a good set of door latches for a 1927 TT enclosed cab truck in good working condition. The cab has the striker plates. Call, text or email at anytime. Please and thanks!

Brad
54zero761230three
Bkirtner@Gmail.com

Hello after years of collecting t parts and building/restoring different models i am cleaning out the garage and selling off my stuff . I have so far loaded a f250 and a 8x12 trailer and more to go everything from engines to wheels to totes of who knows what. I have to much to inventory i just loaded and packed in totes. I will be heading to the...

Looks to be a brand new kit from one of the vendors. One of the rims has a slight blemish as shown in the pics. Otherwise they're perfect. They're $213 at Macs.

New Reflectors
New Chrome rims
3 rim springs (2 new and 1 slightly used)
New gaskets
1 new lamp holder (not pictured - I just found them)
1 serviceable lamp holder in very good condition...

This arm was on a chassis I purchased. It is worn and pitted, but fits tight on steering shaft. It appears to be about an inch longer than a standard arm. $20 includes shipping in US. I do not see any numbers on it.

Selling for a friend. New Ignition Switch for 1919-1925. He installed it last week and never drove the car...found a nice original instead. Price $60 shipped. Please DO NOT contact me through MTFCA. Email garygregory1@aol.com

Offered here is an original pair of accessory track bars. These take the place of the wishbone, and saves the trouble of splitting the wishbone. Great scarce original era accessory, shown is the right hand side. Makes the front axle adjustable , gives you real bonafides, and also 6C045D02-B6C8-4844-A426-4B1262810B96.jpeg...

80 Pieces of #2848 Demountable Rim Bolt Nuts. Unsorted for condition, as found. Retail from parts vendors for new $168. $45 shipped in the CONUS

IMG_1266.JPG
IMG_1267.JPG

Approx. 100 Pieces, approx. 13 lbs. unsorted for condition as found. Retail if new from vendors $115. $45 includes shipping in the CONUS

IMG_1268.JPG
IMG_1269.JPG
IMG_1270.JPG

Offering up a working Allen Electric Manufacturing HCCT. Glass is broken on one gauge, and I'm not sure it works. I am sure the other gauge does.
I can deliver to Hershey if payment is made prior. Or plus actual shipping costs.
Asking $1200 plus shipping.
Please contact though board contact email,
thanks Dave

No core charge, shipping to the lower 48 states, $230.00.

PM if interested.

All the Best,

Hank

For Sale- 2 good rear end Hyatt bearings. All rollers measured between 0.4985 -.4990 . They both came out of my '21. Nothing wrong with them I just put decided to put safety hubs in. I already sold the sleeves and the other 2 bearings.

$40 OBO plus the ride to you.

I have several restored carbs ready to go to Hershey unless someone wants one before. There are two restored U&J set-ups (with or without the manifolds, one ECCO brass carb (with or without the manifold),one Holley 2-screw (1913), one NH Straight through, and several regular NHs . Asking prices are as follows: Either U&J $750.00 with the manifold...

I believe these were available for one year only 1919-1920? then replaced with the simpler less expensive to make 2846B for the Kelsey rims. Unsorted for condition as found. 13 pieces $75 shipped in the CONUS

IMG_1271.JPG
IMG_1272.JPG
IMG_1273.JPG
Screen Shot 2019-09-15 at 12.02.02 PM.png

FE295223-9993-4C25-B8F4-3D1695908B9D.jpeg
BCE8404F-A3FC-4985-96D8-953D328D05E0.jpeg
F67B45BB-061C-4825-8459-3B2CB6C55A6C.jpeg
3AB8B441-5FCE-4526-990E-70ABE7EDB86B.jpeg

Bought these from Howells years ago, understand he just started making the whole deck lid again recently. I’m going the Roadster pickup route instead.
$500 for both or...

Here is a very early TT rear axle. Note the raised ridges on the axle tube. Included is brake levers, a rear crossmember. The spring looks usable if you are hard up. I think I have a couple of hubs to include. The driveshaft came off and is heading to Georgia, so I can tell you this was a pretty low miles chassis. If someone would like this , it...

Hi, I am looking for a Windfield 6 V carburetor, It is an up draft carburetor.

I am now selling out of all my remaining Model T& A Ford parts , tools, accessories & misc other car related parts etc. If you already have my latest 2019/2020 list , or if you'd like one -Just email me and I'll attach one to your email . I no longer have T's or A's , so it all must go. I am now offering 30% OFF the listed price on the list (plus...

0ADEB923-70A8-4721-B4E4-5C3C1904F7AB.jpeg 26CA1E3E-228C-4056-A9CB-7D254FF28C7E.jpeg I believe this is off of a Model A or T. Please let me know if not correct

For Sale pick up in eastern Idaho or buyer pays shipping

$150

Wanted To Buy True Fire Box or Timer Module. Jim Golden, Bowie, Maryland

Looking for a good pair of prest o light tank straps...

I have a new start switch to starter cable that I do not need. $18 shipped. 20190910_201321.jpg

Looking for good usable Front Outside threaded Roller bearings for wood wheels - Need both Left and Right sides...
Thanks Stuart

I have a direct drive distributor setup for sale. This was removed from a running engine a few years ago. The owner had just bought the car and wanted to convert back to original coils. (he was a purist). I took the setup as partial payment for my work. I thought I would maybe use it on one of my projects. But I never got around to it. It was in...

Hand operated valve facing tool. One bolt head says Bertson & Company... Turns freely, nice condition. $50 shipped to you USA.
Contact through board contact info email please. Thanks Dave.

I bought a batch of Ruckstell parts a while back and this ring gear was with them. It has 40 teeth, but the back side is recessed and the markings imply that it is designed to be run with a 13 tooth pinion gear (I do not have the pinion gear).

This ring gear does not appear to me to be worn much if any, see the attached pics.

New ones sell for...

I have a collection of used rim and hub bolts for sale. Some are really good, some not so really good. Asking $25, including shipping to US address.
20190910_132148.jpg

Here is another new Nylon Timing Gear with 7.5 deg adv. Same price as the other $45.00 + shipping. Email me at address in pictures please. D

WANT TO BUY a 1911 Speedometer swivel. Reposting as I failed to put WTB in the subject line and some thought I had one for sale. Sorry for the confusion. Art

Decent pair light pitting but good threads one is for speedometer road gear . $125.00 for the pair plus shipping.
Modelttom1909@gmail

I have a box full of early magazine full page ads.
Some are cars, some are accessories/parts.
They make nice wall hangers. Most are stored in plastic and in very nice condition. Dates on some are in the 20s.
If there's any interest, I'll post more.
Here's 3 up for sale.
Buick, Auburn and a Willys Knight. $20 each including shipping in the USA. I...

Nice threads, not pitted much.
$55 shipped USA