Classifieds - Parts - Page 51

Classifieds - Parts

New Topic

9308 topics

Page 51 of 94
- Jump to page:
Previous
1
…
49
50
51
52
53
…
94
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79922 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

SOLD: NEW lower price - all brass Pat. Pending Holley G

Last post by Walt Wise « Sun Jan 14, 2024 5:17 pm
Replies: 11
by Walt Wise » Sat Jan 06, 2024 10:55 am

First post

All brass Holley G carburetor(except bowl nut and the vendors are out of brass ones), completely disassembled, cleaning all parts, new choke spring, new needle and seat, new venturi, new plates and clips, new modern float, reconditioned spray needle, new installed gasket set, with a two week test run. Carb ready to install on your car. Asking $230...

Last post

Carb has a new home!

Thanks MTFCA!!!

Walt Wise

11 Replies

1791 Views

Last post by Walt Wise
Sun Jan 14, 2024 5:17 pm
ruxtell shifter

Last post by RajoRacer « Sun Jan 14, 2024 2:36 pm
Replies: 3
by KenPruvit » Fri Jan 05, 2024 1:11 pm

First post

ruxtell shifter good shape looks like original handle
150.00 plus shipping prefer pickup in central eastern pa

Last post

Good originals rare - Larry Smith was having a dandy copy reproduced.

3 Replies

978 Views

Last post by RajoRacer
Sun Jan 14, 2024 2:36 pm
WTB 1928 Red Model A Ford Steering Wheel

Last post by BobP « Sun Jan 14, 2024 8:25 am
Replies: 1
by BobP » Thu Jan 11, 2024 7:33 pm

First post

I am looking for an original 1928 red Ford steering wheel. It does NOT need to be perfect but good enough to use on a unrestored pickup, NO TEXTING five07458677eight. Thanks, Bob

Last post

I found one, Thanks, Bob.

1 Replies

460 Views

Last post by BobP
Sun Jan 14, 2024 8:25 am
FS Radiator Cap Chrome Dog Bone SOLD

Last post by MAG « Sat Jan 13, 2024 10:50 pm
Replies: 1
by MAG » Tue Jan 09, 2024 10:10 pm

First post

Good slightly used Chrome Radiator Cap Dog Bone. $25 shipped to your door. Email me at markpaulagember AT aol dot com

Last post

Sold awaiting payment

1 Replies

561 Views

Last post by MAG
Sat Jan 13, 2024 10:50 pm
FS: Brass Top Non Model T Coil

Last post by Ron Patterson « Sat Jan 13, 2024 6:42 pm
Replies: 7
by George House » Mon Jan 08, 2024 5:30 pm

First post

I believe probably for a one cylinder engine. Excellent wood, black brass top and nearly new KW points.
Only $50 + mail cost. Personal check is fine.
gwhouse731(at)gmail(dot)com

Last post

George
The pictured coil came oit of a KW Master vibrator.
It is unique in taht it has no secondary winding.
Ron Patterson

7 Replies

1438 Views

Last post by Ron Patterson
Sat Jan 13, 2024 6:42 pm
WTB: Timer pull rod

Last post by Randall strickland « Sat Jan 13, 2024 4:19 pm
Replies: 1
by Apis Mellifera » Thu Jan 11, 2024 4:26 pm

First post

I am looking for a timer rod (the rod that goes from the steering column to the timer). It's for a 1914, but I assume any pre-'26 would work. Lang's etc are out of stock. Thanks.

Update: Part Located. Many Thanks

Last post

Sent you a pm

1 Replies

578 Views

Last post by Randall strickland
Sat Jan 13, 2024 4:19 pm
NOS Starter Brush Holders FS

Last post by Dan Hatch « Sat Jan 13, 2024 3:46 pm

by Dan Hatch » Sat Jan 13, 2024 3:46 pm

Here are some NOS Starter Brush holder plates. No springs. $10 + shipping each. Email me at address in pictures.
IMG_3359.jpeg
IMG_3360.jpeg
IMG_0260.jpeg

0 Replies

468 Views

Last post by Dan Hatch
Sat Jan 13, 2024 3:46 pm
1923 Roadster Needs Completion

Last post by Stephen1915 « Sat Jan 13, 2024 1:33 pm

by Stephen1915 » Sat Jan 13, 2024 1:33 pm

Car is sold

0 Replies

765 Views

Last post by Stephen1915
Sat Jan 13, 2024 1:33 pm
FS: E&J "1908" Burner Missing Thumb Wheel $25

Last post by Rodger Erickson « Sat Jan 13, 2024 11:48 am
Replies: 2
by Rodger Erickson » Mon Jan 01, 2024 1:40 pm

First post

FS: E&J 1908 Burner, this is the earlier style with the two-piece shell. Missing Thumb Wheel $25, shipping not included.
Thanks for looking!

ejbrn01.jpg

ejbrn02.jpg

Last post

Spoken for.
Thanks, MTFCA.

2 Replies

612 Views

Last post by Rodger Erickson
Sat Jan 13, 2024 11:48 am
FS NEW PARTS LOT (REDUCED PRICE)

Last post by Mark Chaffin « Sat Jan 13, 2024 10:24 am
Replies: 3
by Mark Chaffin » Tue Jan 09, 2024 4:37 pm

First post

An assortment of new parts offered as one lot. Total current retail value is $176.35. Get the entire lot for $80.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Grab Bag.jpg

Last post

Sorry. No bands.

3 Replies

1181 Views

Last post by Mark Chaffin
Sat Jan 13, 2024 10:24 am
WTB: Victor Headlight hinges

Last post by Brent Mize « Sat Jan 13, 2024 7:28 am

by Brent Mize » Sat Jan 13, 2024 7:28 am

Hello all,
I need a couple of headlamp door hinges and locking stud mount for a Victor Model 2.
I need these to finish up a set for a friend. I would be glad to buy old beat up rims to get these parts.
Please let me know if you can help.
Thanks
Brent

0 Replies

544 Views

Last post by Brent Mize
Sat Jan 13, 2024 7:28 am
FS: Model T Ford Right Sidelight & Taillight

Last post by Wayne Sheldon « Sat Jan 13, 2024 5:59 am
Replies: 1
by Junkyard4 » Fri Jan 12, 2024 1:24 pm

First post

Model T Ford Right Sidelight & Taillight. The sidelight is in nice condition and complete. The taillight has a good size dent in the side and the burner is missing but could be easily restored. The glass is all in good condition. Located in Libertyville Illinois but I am willing to ship. $50 for the pair.
Private message, call or text...

Last post

They both look to be tail lamps. One appears to be a Ford-O late oil taillamp, while the other is a typical 1918 to mid 1920s taillamp. Hard to tell from the photos. Can't make out the colors of the glass. Glass in either case may have been replaced at some time however.
These type sidelamps from the Ford factory never had a smaller side lens...

1 Replies

534 Views

Last post by Wayne Sheldon
Sat Jan 13, 2024 5:59 am
WTB Model T wheels 30 X 3 1/2

Last post by Kuffs565 « Sat Jan 13, 2024 2:59 am
Replies: 21
by Kuffs565 » Thu Oct 05, 2023 9:12 pm

First post

Looking for (4) 30 inch x 3 1/2 demountable wood spoke wheels? New or excellent condition. Anyone have any? Or know of anyone?

Last post

Back on top

21 Replies

3389 Views

Last post by Kuffs565
Sat Jan 13, 2024 2:59 am
FS: Front Spring Perch Pairs

Last post by George House « Fri Jan 12, 2024 4:25 pm
Replies: 4
by George House » Mon Jan 08, 2024 4:13 pm

First post

Cleaning out the shop. All pairs have excellent threads. Most have no bushings. None have the lower opening broken down. Only $45 pr. + $10.20 USPS small flat rate box. Need good perch nuts ? $2 ea.
gwhouse731(at)gmail(dot)com….please designate pair you want A-D left to right. ..personal check is fine….

Last post

My only ***btt*** before this ad sinks into oblivion 😔

4 Replies

906 Views

Last post by George House
Fri Jan 12, 2024 4:25 pm
1909/1910 head

Last post by ModelTtexasMan « Fri Jan 12, 2024 3:13 pm

by ModelTtexasMan » Fri Jan 12, 2024 3:13 pm

1909 / 1910 Model T Head - doesn't say made in USA - $850.00
contact ckvalax@gmai.com
I have other low heads for $250

0 Replies

634 Views

Last post by ModelTtexasMan
Fri Jan 12, 2024 3:13 pm
parts for sale

Last post by ModelTtexasMan « Fri Jan 12, 2024 3:05 pm

by ModelTtexasMan » Fri Jan 12, 2024 3:05 pm

1913 Transmission Cover for sale - 100
1909 Kingston Ignition Switch - 200
contact ckvalax@gmail.com

0 Replies

687 Views

Last post by ModelTtexasMan
Fri Jan 12, 2024 3:05 pm
FS COILS (REDUCED PRICES)

Last post by Mark Chaffin « Fri Jan 12, 2024 12:52 pm
Replies: 5
by Mark Chaffin » Tue Jan 09, 2024 12:52 pm

First post

Three sets of coils for rebuild available for purchase. Each set (four coils) are in nice overall condition. They have been checked and do not appear to have any open windings. Price per set is $80.00 plus $18.50 USPS domestic Priority flat rate shipping. Mark Chaffin (951) 805-0928

1-1.jpg
1-2.jpg
1-3.jpg
SET #1 SOLD

Last post

Set #1 to Wayne. Email sent.

5 Replies

1141 Views

Last post by Mark Chaffin
Fri Jan 12, 2024 12:52 pm
FS Low Head - SOLD

Last post by MAG « Fri Jan 12, 2024 10:33 am
Replies: 3
by MAG » Tue Jan 09, 2024 9:43 pm

First post

Excellent low head taken off a running motor. Ford script with Made in USA. Spark plug threads are good. Ready to install. $225 + shipping. (1913-16) Email me at markpaulagember AT aol DOT com

Last post

Sold awaiting payment

3 Replies

1133 Views

Last post by MAG
Fri Jan 12, 2024 10:33 am
Northern Colorado Swap Meet

Last post by MariaDenesik « Fri Jan 12, 2024 1:47 am
Replies: 11
by Gene_French » Sat Jul 15, 2023 7:20 pm

First post

the 54th annual AACA swap meet will be held on August 19th. and 20 th. ... this is a general swapmeet with vehicals and parts ranging from early 1900's thru current years ... there is usually a good number of vendors with model T thru early V-8 ford parts ... i will be there with my babbitt bearing tooling and re-babbitted ball caps and connecting...

Last post

Any more pics?

11 Replies

3051 Views

Last post by MariaDenesik
Fri Jan 12, 2024 1:47 am
FS NOS Genuine Ford front spring Shackles

Last post by LuckyStrike1917 « Fri Jan 12, 2024 1:07 am
Replies: 2
by LuckyStrike1917 » Thu Jan 04, 2024 5:49 pm

First post

N.O.S Genuine Ford Front spring shackles with scripted bars
Great condition, no pitting or rust.
$235 obo for the pair, plus shipping.
See photos for more info

Contact:
Thru forum
Or
Jerontakacs@gmail.com
Or
734-895-5363

Last post

Still for sale

Bump to top

2 Replies

612 Views

Last post by LuckyStrike1917
Fri Jan 12, 2024 1:07 am
FS NOS Genuine Ford scripted Tie rod bolts

Last post by LuckyStrike1917 « Fri Jan 12, 2024 1:06 am
Replies: 1
by LuckyStrike1917 » Thu Jan 04, 2024 6:13 pm

First post

Genuine NOS scripted Ford Tie rod bolts.
Threads are in great condition, script is legible, flip up caps work as they should. No rust or putting.

$60 for the pair plus shipping

Contact:
Via forum
Or
Jerontakacs@gmail.com
Or
734-895-5363

IMG_9627.jpeg
IMG_9628.jpeg

Last post

Bump to top. Still for sale

1 Replies

513 Views

Last post by LuckyStrike1917
Fri Jan 12, 2024 1:06 am
Watch out for scammer +1 (251) 721-9731

Last post by Mark Gregush « Fri Jan 12, 2024 12:27 am
Replies: 3
by ahovey » Thu Jan 11, 2024 5:19 pm

First post

This guy is an imposter who goes by James. He sent photos from an eBay listing and claimed they were his and keeps trying to contact me.

Last post

You should be able to add that person to your email spam folder or just ignore and delete.

3 Replies

931 Views

Last post by Mark Gregush
Fri Jan 12, 2024 12:27 am
WTB door handle extensions

Last post by colonelpowers « Thu Jan 11, 2024 11:19 pm

by colonelpowers » Thu Jan 11, 2024 11:19 pm

I was blessed to find a good set of curtains for the 26 touring. After driving some I think that it would be helpful to get some extensions to make it easier to grab the handles through the little access flap. They don't need to be pretty, the car isn't. Just looking for something that will work. I might could make do with just one if someone has...

0 Replies

447 Views

Last post by colonelpowers
Thu Jan 11, 2024 11:19 pm
FS GREASE CUPS (REDUCED PRICE)

Last post by Mark Chaffin « Thu Jan 11, 2024 7:33 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 4:42 pm

First post

An assortment of grease cups. These currently retail for $8.95 each. Get the entire lot (14 pieces) for $40.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Grease Cups.jpg

Last post

Now $40.00 plus shipping.

1 Replies

525 Views

Last post by Mark Chaffin
Thu Jan 11, 2024 7:33 pm
FS Original 1912-1913 Nonpareil Brass Horn

Last post by havnfun « Thu Jan 11, 2024 5:36 pm
Replies: 17
by ThreePedalTapDancer » Wed Nov 29, 2023 4:31 pm

First post

Here we have a very rare, round mounting bracket, all-brass Nonpareil single twist horn for the late 1912-1913 Model T Ford. This original horn is in beautiful condition with no major damage or repairs. It has a wonderful polished surface. No dents, only very very minor tiny shelf wear imperfections that can easily be remedied if noticed at all....

Last post

According to the 2021 judging guidelines, July 1912 single twist horns were used, painting black with brass bezel…

It’s a BEAUTIFUL horn, if you’re going for judging, paint accordingly, after judging, wash the paint off and show off the beauty of the horn.

17 Replies

3123 Views

Last post by havnfun
Thu Jan 11, 2024 5:36 pm
Wanted: Lang's Good Gas Shut-off Valve

Last post by TWrenn « Thu Jan 11, 2024 2:44 pm
Replies: 7
by RajoRacer » Sat Jan 06, 2024 12:17 pm

First post

Anyone happen to have one or two of those good gas shut-off valves that were available from Lang's a few years back ? The other current type available can be problematic.

Last post

I could use a few.

I doubt there's a few left on earth! Been out of production for a couple of years at least and most are probly hanging onto any they got as a result.

7 Replies

1510 Views

Last post by TWrenn
Thu Jan 11, 2024 2:44 pm
WTB Good spiral wound Hyatt rear axle bearings

Last post by Karl Von Neumann « Thu Jan 11, 2024 12:06 pm
Replies: 2
by ahovey » Thu Jan 11, 2024 11:31 am

First post

Hi everyone,

I'm looking to buy some good Hyatt roller bearings for use in my rear end rebuild for my Torpedo. If anyone has spares with tight cages and rollers hopefully pretty close to .500 please let me know. Ultimately would need a quantity of four but certainly willing to put together a piece meal collection. Feel free to email me through...

Last post

I've got some I can measure the cages are tight

2 Replies

463 Views

Last post by Karl Von Neumann
Thu Jan 11, 2024 12:06 pm
FS: Floorboard Risers

Last post by George House « Thu Jan 11, 2024 10:43 am
Replies: 2
by George House » Mon Jan 08, 2024 5:17 pm

First post

Excellent sheet metal ! No repairs, rust or dents. Some original paint..Only $65 + the ride… need other picture angles ? Just ask..gwhouse731(at)gmail(dot)com

Last post

OK…. how about $55 + mailing then ? Would be necessary on homemade wood T body.

2 Replies

623 Views

Last post by George House
Thu Jan 11, 2024 10:43 am
Wanted 1 Dill TR-16 valve stem

Last post by CudaMan « Thu Jan 11, 2024 10:12 am
Replies: 3
by Tbird » Thu Jan 11, 2024 9:12 am

First post

Anyone have one TR-16 valve stem that they can part with?

Thanks!
mikebird@lifeattheridge.net

Last post

I'm watching for the PM, I haven't seen it yet. I just sent you an email to reply to as a backup in case the PM never shows up. :)

I just got your email reply, on my way to the post office with your stem. :)

3 Replies

473 Views

Last post by CudaMan
Thu Jan 11, 2024 10:12 am
Need help

Last post by Mark Gregush « Wed Jan 10, 2024 9:16 pm
Replies: 1
by garyl » Wed Jan 10, 2024 5:36 pm

First post

Where can I get the rubber seal that goes between the door and the body at the top for a 1926 Tudor sedan? I’ve looked at several suppliers and just don’t see it. I guess I don’t know what I’m looking for.

Last post

Try asking on the general forum and add to the title what you need help with.

1 Replies

540 Views

Last post by Mark Gregush
Wed Jan 10, 2024 9:16 pm
SPOKEN FOR Stewart Speedometer Swivel, Gear and Cable

Last post by Tbird « Wed Jan 10, 2024 6:19 pm
Replies: 3
by George House » Wed Jan 10, 2024 6:05 pm

First post

The chain cable inside the sheath turns as I turn the gear. Includes additional cable (pictured) with same ends. No damage.
Only $100 + the ride….gwhouse731(at)gmail(dot)com

Last post

….in 4 minutes. Thank you Mike and MTFCA !!
…. shoulda asked $300 😔😔😔😔😜

Been looking for a nice one for quite some time!

3 Replies

556 Views

Last post by Tbird
Wed Jan 10, 2024 6:19 pm
11-12 rear touring fender fs

Last post by CTLeonard « Wed Jan 10, 2024 4:00 pm

by CTLeonard » Wed Jan 10, 2024 4:00 pm

Reproduction fenders in very good shape. 410.00 each if you were to buy. Get this pair for 425.00 plus shipping. ctleonard64@gmail.com IMG_20240110_145507319.jpg IMG_20240110_145457222.jpg IMG_20240110_145544405.jpg IMG_20240110_145529292.jpg

0 Replies

507 Views

Last post by CTLeonard
Wed Jan 10, 2024 4:00 pm
Early front fenders fs. With controversy!

Last post by CTLeonard « Wed Jan 10, 2024 3:48 pm

by CTLeonard » Wed Jan 10, 2024 3:48 pm

So I've looked through the books, and cannot come up with a definite answer. The square nose is going back to 11-12.. The ribs take me to late 13, but 13 was a more rounded nose. 14 also has the rounded nose, but the ribs are closer except that these fenders don't have the ribs on the inner fender well. Drove myself crazy trying to figure it out....

0 Replies

621 Views

Last post by CTLeonard
Wed Jan 10, 2024 3:48 pm
FS ELECTRIC TAIL LIGHT (SOLD)

Last post by Mark Chaffin « Wed Jan 10, 2024 3:13 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 5:53 pm

First post

One nice single contact tail light assembly. Retail is $44.95. Yours for $35.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805 0928 SOLD

20240109_144949.jpg

20240109_145005.jpg

Last post

Sold to A.J.

1 Replies

491 Views

Last post by Mark Chaffin
Wed Jan 10, 2024 3:13 pm
FS --- TT backing plates

Last post by 26modeltt « Wed Jan 10, 2024 2:13 pm

by 26modeltt » Wed Jan 10, 2024 2:13 pm

2 Repairable TT backing plates. $30.00 plus shipping. 920-two two six, 1005

0 Replies

444 Views

Last post by 26modeltt
Wed Jan 10, 2024 2:13 pm
FS STARTER SWITCH LOT (SOLD)

Last post by Mark Chaffin « Wed Jan 10, 2024 12:54 pm
Replies: 2
by Mark Chaffin » Tue Jan 09, 2024 4:45 pm

First post

Three starter switches offed as one lot. Price is $35.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Switches 1.jpg

Switches 2.jpg

Last post

Hi Vernon. Sent you an email.

2 Replies

620 Views

Last post by Mark Chaffin
Wed Jan 10, 2024 12:54 pm
FS 6 Fluted Oil Caps – ALL SOLD

Last post by MAG « Wed Jan 10, 2024 11:59 am
Replies: 4
by MAG » Tue Jan 09, 2024 9:51 pm

First post

o 6 fluted original steel oil cap. Plain top. (1915-16) $50 + $15 shipping.
o 6 fluted original steel oil cap with Ford Script and MADE IN USA. (1915-16) $75 + $15 shipping. 2 are available.
o 6 fluted original brass cap Script Ford with Made IN USA. (1913-14) $75 + $15 shipping. SOLD
All have intact screens. Email me at markpaulagember AT aol DOT...

Last post

Only the plain 6 fluted oil cap is now available, all others sold awaiting payment.

4 Replies

921 Views

Last post by MAG
Wed Jan 10, 2024 11:59 am
FS Aluminum Timer - SOLD

Last post by MAG « Wed Jan 10, 2024 11:43 am
Replies: 1
by MAG » Tue Jan 09, 2024 9:26 pm

First post

NEW reproduction aluminum timer and roller assembly for the late 1912 – 1913 Model T’s. These are no longer being reproduced. $100 + $15 shipping. Email me at markpaulagember AT aol DOT com

Last post

Sold awaiting payment

1 Replies

518 Views

Last post by MAG
Wed Jan 10, 2024 11:43 am
FS Exhaust Pack Nut Wrench - SOLD

Last post by MAG « Wed Jan 10, 2024 10:35 am
Replies: 1
by MAG » Tue Jan 09, 2024 10:12 pm

First post

Cast steel no markings. $50 and $15 shipping. New aluminum reproductions are over $80. Email me at markpaulagember AT aol dot com

Last post

Sold awaiting payment

1 Replies

554 Views

Last post by MAG
Wed Jan 10, 2024 10:35 am
FS Screwdriver wood handled for the Ford Model A - SOLD

Last post by MAG « Wed Jan 10, 2024 10:34 am
Replies: 2
by MAG » Tue Jan 09, 2024 10:03 pm

First post

Ford Model A wood handled screwdriver in good condition. $30 + $10 shipping. Email me at markpaulagember AT aol dot com

Last post

Sold awaiting payment

2 Replies

645 Views

Last post by MAG
Wed Jan 10, 2024 10:34 am
FS TRANSMISSION BUSHINGS (SOLD)

Last post by Richard K « Wed Jan 10, 2024 10:22 am
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 2:03 pm

First post

One set of transmission bushings. These were in a bag and came out of an estate sale. Price is $30.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

Bushings.jpg

Last post

Hi Mark, I'll take them, email sent. Richard

1 Replies

563 Views

Last post by Richard K
Wed Jan 10, 2024 10:22 am
FS EARLY STEERING WHEEL (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 7:36 pm

by Mark Chaffin » Tue Jan 09, 2024 7:36 pm

One early steering wheel. Wooden rim is not the best for sure. Price is $40.00 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928 SOLD

20240109_163228.jpg

20240109_163244.jpg

0 Replies

503 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 7:36 pm
FS UNIVERSAL JOINT (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 7:00 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 4:43 pm

First post

One very nice and tight Ford script universal joint $50.00 plus $8.50 domestic shipping. Mark Chaffin (9561) 805-0928

Ujoint.jpg

Last post

Sold to Josh. :)

1 Replies

351 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 7:00 pm
FS DRIVESHAFT BOLT SET (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 7:00 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 5:41 pm

First post

One set of late driveshaft bolts $25.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

20240109_143933.jpg

Last post

Sold to Josh. :)

1 Replies

335 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 7:00 pm
FS WINFIELD MANIFOLD (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 6:39 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 5:28 pm

First post

Winfield manifold $100 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0828

20240109_142430.jpg

Last post

Sold to James. PayPal received. Thank you. :)

1 Replies

408 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 6:39 pm
FS CARBURETOR ADAPTORS (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 6:26 pm
Replies: 3
by Mark Chaffin » Tue Jan 09, 2024 5:14 pm

First post

Two carburetor adaptors as described below. Please add $8.50 each for domestic shipping. Mark Chaffin (951) 805-0928

Flange 1.jpg

Flange 2.jpg

Flange 3.jpg
Carburetor adaptor. Aluminum $25.00 plus shipping SOLD

Last post

Number two sold to Craig. :)

3 Replies

496 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 6:26 pm
FS AC SPEEDOMETER DRIVE SETUP (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 2:55 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 2:08 pm

First post

Nice complete AC Speedometer drive setup. Price is $100 plus $18.50 domestic shipping. Mark Chaffin (951) 805-0928

AC.jpg

Last post

Sold to Rick. Thanks Rick! :)

1 Replies

354 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 2:55 pm
FS EARLY STYLE DUAL SWITCH (SOLD)

Last post by Mark Chaffin « Tue Jan 09, 2024 2:54 pm
Replies: 1
by Mark Chaffin » Tue Jan 09, 2024 2:07 pm

First post

Nice early style (1915-17) dual push pull switch. This would be a nice addition for an early speedster build. Price is $60.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

Switch 1.jpg

Switch 2.jpg

Last post

Sold to Rick. Thanks Rick! :)

1 Replies

436 Views

Last post by Mark Chaffin
Tue Jan 09, 2024 2:54 pm
1926 NJ Tag FS

Last post by Dan Hatch « Tue Jan 09, 2024 1:36 pm
Replies: 2
by Dan Hatch » Sat Jan 06, 2024 1:41 pm

First post

Here is a 1926 NJ tag. Not rusted though anywhere. You don’t find them this solid anymore. 1960’s price of $30 + shipping.
If no one wants it guess it can patch a hole on my old trailer.
Email me at address in pictures. Thanks Dan
IMG_3336.jpeg
IMG_3337.jpeg
IMG_0260.jpeg

Last post

Sold pending payment

2 Replies

528 Views

Last post by Dan Hatch
Tue Jan 09, 2024 1:36 pm
Wanted to buy: Misc. older Vintage Ford magazines

Last post by old_charley « Tue Jan 09, 2024 10:45 am
Replies: 4
by old_charley » Sun Jan 07, 2024 4:34 pm

First post

Hey everyone.
I am in need of three Vintage Ford issues to complete an entire set from Vol. 1, #1 to the present. Somehow or other I've managed to carelessly misplace them. They are no longer available from the MTFCA website store. Here's what I'm looking for:

Vol. 20, #5 (1985)
Vol. 43, #2 (2008)
Vol. 45, #2 (2010)

Any help finding these will...

Last post

Thank you, gentlemen. I appreciate the assistance.

4 Replies

836 Views

Last post by old_charley
Tue Jan 09, 2024 10:45 am
For Sale VISOR FRAME and Brackets for 23-25 Closed Cars

Last post by tom_strickling « Tue Jan 09, 2024 9:34 am
Replies: 4
by tom_strickling » Wed Feb 22, 2023 5:31 pm

First post

The title says it all. I have new made visor frames and brackets for 23-25 closed cars. I don't think these are available in catalogs. I used an original as the pattern. The frame is a little heavier and the stock for the brackets had to be custom made before the brackets could be made. These are very nice with all holes drilled to match the...

Last post

Still available. Ready to ship

4 Replies

1568 Views

Last post by tom_strickling
Tue Jan 09, 2024 9:34 am
Jacobson-Brandow coilbox key F/S

Last post by Layden Butler « Mon Jan 08, 2024 6:39 pm

by Layden Butler » Mon Jan 08, 2024 6:39 pm

Original key $75 including domestic 48 state postage.

0 Replies

672 Views

Last post by Layden Butler
Mon Jan 08, 2024 6:39 pm
Fiber gears ????

Last post by hah « Mon Jan 08, 2024 4:25 pm
Replies: 4
by Dan Hatch » Sat Jan 06, 2024 1:49 pm

First post

A while back someone was wanting fiber timing gears. I got 3 .
$10 + shipping for all of them. Email me at address in pictures. Thanks Dan
IMG_3330.jpeg
IMG_0260.jpeg

Last post

They are awful for a timing gear. However, they are great for making the internals of a ford timer.

4 Replies

942 Views

Last post by hah
Mon Jan 08, 2024 4:25 pm
4 piston rods FS

Last post by Tbird « Mon Jan 08, 2024 12:23 pm

by Tbird » Mon Jan 08, 2024 12:23 pm

Set of 4 rods. $25 plus shipping

mikebird@lifeattheridge.net

IMG_1157.jpeg

0 Replies

684 Views

Last post by Tbird
Mon Jan 08, 2024 12:23 pm
Diff Carrier w Ring Gear & Pinion FS

Last post by Dan Hatch « Mon Jan 08, 2024 12:14 pm
Replies: 13
by Dan Hatch » Sun Oct 15, 2023 12:46 pm

First post

Here is a Rear End Carrier with Ring Gear and Pinion. Looks to be in good shape. Ring Gear and Pinion are NOT a matched set. Look at pictures and ask any questions you have. Email me at address in pictures. $250 + shipping. Thanks Dan.
IMG_3266.jpeg
IMG_3269.jpeg
IMG_3272.jpeg
IMG_0260.jpeg

Last post

Sold pending payment

13 Replies

1827 Views

Last post by Dan Hatch
Mon Jan 08, 2024 12:14 pm
Need bearing

Last post by Art Ebeling « Mon Jan 08, 2024 10:45 am
Replies: 2
by Dollisdad » Sat Jan 06, 2024 5:52 pm

First post

Need outside left(driver side), tapered cone, threaded, roller wheel bearing. Don’t need new or nice. Well used will work.

Thanks Tom

Last post

Tom, I have one for you. PM or email me your info. Art

2 Replies

834 Views

Last post by Art Ebeling
Mon Jan 08, 2024 10:45 am
All spoken for ..NOS Hub Brake Cams 09-25 Ford Script

Last post by dobro1956 « Sun Jan 07, 2024 11:08 pm
Replies: 3
by dobro1956 » Fri Jan 05, 2024 5:37 pm

First post

(2 pairs sold two remaining). I have four pairs of 1925 and earlier hub brake cams. They are NOS and Ford Script. The originals are far better than the reproduction parts. The reproductions are made of a softer steel than the originals. These will outlast most of us and maybe the next guy too.

Ill take 30.00 per pair plus shipping. Shipping is...

Last post

All spoken for ...... Thanks MTFCA

3 Replies

973 Views

Last post by dobro1956
Sun Jan 07, 2024 11:08 pm
Body moldings

Last post by Steves Ts « Sun Jan 07, 2024 7:40 pm
Replies: 15
by Steves Ts » Fri Jan 05, 2024 1:35 pm

First post

WTB Outside body moldings for a 1914 Ford Model T Roadster. These moldings mount on the back of the body and curl down following the lines of the turtle deck just below the deck. The moldingd appear to be solid steel and mounted on the body via screws. any help would be greatly appeciated

Last post

Thanks Mike, that would make sense considering in the day They used lead for body fillers (no plastic fillers then)

15 Replies

2430 Views

Last post by Steves Ts
Sun Jan 07, 2024 7:40 pm
Early steering spider and wood wheel SOLD

Last post by vwmarc « Sun Jan 07, 2024 5:56 pm
Replies: 1
by Tbird » Sun Jan 07, 2024 5:45 pm

First post

Here’s an early steering spider with the double key way. Not brass but iron. Wood rim is original with one finger joint. Great Wall hanger!

$15 plus shipping

mikebird@lifeattheridge.net

IMG_1154.jpeg

IMG_1155.jpeg

IMG_1156.jpeg

Last post

I will take it! Thanks.

1 Replies

499 Views

Last post by vwmarc
Sun Jan 07, 2024 5:56 pm
Schrader stuff #2 SOLD

Last post by Tadpole « Sun Jan 07, 2024 5:54 pm
Replies: 1
by Tbird » Sun Jan 07, 2024 5:36 pm

First post

Here’s a grab bag of valve stem covers
2 pairs match
4 singles

Different styles of rim nuts

$10 plus shipping for all
mikebird@lifeattheridge.net

IMG_1153.jpeg

Last post

MmmmHmmmm email sent!

1 Replies

495 Views

Last post by Tadpole
Sun Jan 07, 2024 5:54 pm
Schrader stuff #1 SOLD

Last post by Tbird « Sun Jan 07, 2024 5:27 pm

by Tbird » Sun Jan 07, 2024 5:27 pm

:geek: 4 Schrader valve stem covers
1 777 Schrader valve stem
2 early round rim nuts that valve stems screw onto

* the valve stem is worn a little on one side but everything still threads just fine.
* the rim nuts are original and show wear. Would be good for that original unrestored survivor

All for $20 plus shipping
Thanks...

0 Replies

588 Views

Last post by Tbird
Sun Jan 07, 2024 5:27 pm
For Sale: Older Vintage Ford Magazines

Last post by old_charley « Sun Jan 07, 2024 4:35 pm

by old_charley » Sun Jan 07, 2024 4:35 pm

I have a bunch of older Vintage Ford magazines for sale. Maybe I'm nuts, but how does $5 each sound, plus the shipping? Cheaper if you want a bunch?
Here's what I have by Volume and number:

Vol. 4, #5
Vol. 8, #1
Vol. 11, #1 (3 copies), #2, #5 (2 copies), #6 (2 copies)
Vol. 12, #1 (2 copies), #5 (2 copies), #6 (2 copies)
Vol. 13, #1, #3 ( 3...

0 Replies

589 Views

Last post by old_charley
Sun Jan 07, 2024 4:35 pm
Cleanin up the shop - Starter switch

Last post by Kevin Pharis « Sun Jan 07, 2024 12:10 pm
Replies: 4
by Kevin Pharis » Sun Oct 08, 2023 2:04 pm

First post

Must be left over from my ol ‘27 roadster. You want it? $25 shipped within the lower 48. Email thru the forum please

0C81C887-02E5-4F9B-8294-00D8AFD86C2F.jpeg

Last post

Sorry Doug, but Larry beat you to it. Thanks for helpin clean up the shop!

4 Replies

1283 Views

Last post by Kevin Pharis
Sun Jan 07, 2024 12:10 pm
New wood spokes - full set of 48

Last post by Kevin Pharis « Sun Jan 07, 2024 1:52 am
Replies: 5
by Kevin Pharis » Fri Dec 01, 2023 9:51 pm

First post

Long story short… old spokes were loose, so new spokes were ordered. All spokes were sanded, one wheel was dry fit. Turns out the felloes we have use a .562” spoke tennon not a .500”. So in the end we were forced to send the wheels to a professional to make special spokes. Here is a link to what was ordered, you can see the part number written on...

Last post

Spokes have a new home in Texas!

5 Replies

1911 Views

Last post by Kevin Pharis
Sun Jan 07, 2024 1:52 am
FS Samson Lion Horn

Last post by ThreePedalTapDancer « Sat Jan 06, 2024 10:51 pm
Replies: 3
by ThreePedalTapDancer » Sat Dec 09, 2023 7:36 pm

First post

Original rare Samson Lion Horn. Excellent condition, very clean. Nice paint, no dents. Works great, loud and obnoxious just the way you need it before entering a busy intersection or club meeting. Ready to mount and use. 250 includes shipping.

IMG_9675.jpeg

Last post

Still available

3 Replies

969 Views

Last post by ThreePedalTapDancer
Sat Jan 06, 2024 10:51 pm
FS Bevin Bermuda Bell (SOLD)

Last post by ThreePedalTapDancer « Sat Jan 06, 2024 5:10 pm
Replies: 1
by ThreePedalTapDancer » Thu Jan 04, 2024 4:56 pm

First post

Here is an original early T-era heavy polished brass Bevin Bermuda Foot Bell. This bell is in nice working condition, with the polished brass bell showing minor road wear and small nicks and scuffs here and there, but no dents. Looks beautiful with just enough patina for a 100 year old bell. It mounts under the floorboards and produces a very loud...

Last post

Impressive loud sound from this one.

1 Replies

441 Views

Last post by ThreePedalTapDancer
Sat Jan 06, 2024 5:10 pm
SOLD: Kingston fuel filter cleaner inlet fitting

Last post by South Park Zephyr « Sat Jan 06, 2024 2:11 pm
Replies: 4
by Walt Wise » Sat Jan 06, 2024 11:11 am

First post

Here we have a carburetor elbow fuel filter assembly fitting made I think for the brass Kingston L4, but will work just like a plain original brass elbow on most any T carb and filter your gas. As the pics show, disassembled and cleaned. Asking $25 which includes FREE Shipping to any of the lower 48 contiguous states only. Paypal preferred, using...

Last post

If by chance there is another one, or if anyone else has one for sale, I am looking for one

Scott

4 Replies

664 Views

Last post by South Park Zephyr
Sat Jan 06, 2024 2:11 pm
FS 4 dip oil pan

Last post by fordrelic « Sat Jan 06, 2024 10:48 am
Replies: 1
by fordrelic » Sun Dec 31, 2023 6:22 pm

First post

For Sale 4 dip oil pan with cover. $75 plus shipping

Sumner, Illinois 62466 T motor pan 2.jpg T motor pan 2.jpg

Last post

If you need it make an reasonable offer.

1 Replies

598 Views

Last post by fordrelic
Sat Jan 06, 2024 10:48 am
radius rods fs. 17-25. Sold

Last post by Allan « Fri Jan 05, 2024 11:06 pm
Replies: 7
by CTLeonard » Tue Nov 28, 2023 1:17 pm

First post

Good set of rods with good threads. 100.00 plus shipping. ctleonard64@gmail.com IMG_20231128_121503459.jpg IMG_20231128_121417509.jpg IMG_20231128_121454510.jpg IMG_20231128_121438949.jpg IMG_20231128_121429341.jpg

Last post

Mike, neither are they 17-25 radius rods They are round in section until the back end. 20's rods were flat, with a seam on the under side, which means they are left and right when fitted. I am not sure when your rounded type were replaced by the flattened ones, but if I had to guess I would say late teens.
Someone will know.

Don't you love this...

7 Replies

1813 Views

Last post by Allan
Fri Jan 05, 2024 11:06 pm
21 inch split rims

Last post by Allan « Fri Jan 05, 2024 10:51 pm
Replies: 4
by tselliott » Tue Nov 28, 2023 2:49 am

First post

Here are three 21 split rims. The two black Firestones are in really nice shape. $125 each or 2 for $225 plus shipping.
The other silver one is missing one of the lugs, otherwise in good shape. $50 plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Donald, if you are stickler for originality, you will have to drill two holes either side of the split to pass the rims off as Canadian. They used a special tool made of heavy spring steel rod to collapse the rim to fit the tyres. Our Canadian sourced cars had this feature on the 26-7 improved cars. I have only ever seen one of the special tools...

4 Replies

1380 Views

Last post by Allan
Fri Jan 05, 2024 10:51 pm
WTB sedan gutter

Last post by Tinner12 « Fri Jan 05, 2024 8:45 pm

by Tinner12 » Fri Jan 05, 2024 8:45 pm

Need the gutter moldings for a 26 4dor sedan

0 Replies

527 Views

Last post by Tinner12
Fri Jan 05, 2024 8:45 pm
WTB sedan gutter

Last post by Tinner12 « Fri Jan 05, 2024 8:44 pm

by Tinner12 » Fri Jan 05, 2024 8:44 pm

Need the gutter moldings for a 26 4dor sedan

0 Replies

541 Views

Last post by Tinner12
Fri Jan 05, 2024 8:44 pm
WTB Set of Early Wheels

Last post by rnwilliams « Fri Jan 05, 2024 5:54 pm

by rnwilliams » Fri Jan 05, 2024 5:54 pm

I am interested in buying a good set of early (mid 1911-1916) wheels. 2/30 x 3 and 2/30 x 3.5 wood oval spoke with correct hubs.
I would entertain a set that needs to be re-wooded as long as the rims were in good shape with no sharp edges.
Would also entertain buying a new set of 2/30 x 3 and 2/30 x 3.5 clincher rims to have spoked. (anyone know...

0 Replies

649 Views

Last post by rnwilliams
Fri Jan 05, 2024 5:54 pm
Magneto control switch Bosch and others F/S

Last post by Layden Butler « Fri Jan 05, 2024 5:22 pm

by Layden Butler » Fri Jan 05, 2024 5:22 pm

Magneto control switch, it makes in the OFF position to ground and kill most makes of magnetos including Bosch. New Old Stock perfect condition ready to use. $135 including 48 state postage.

0 Replies

623 Views

Last post by Layden Butler
Fri Jan 05, 2024 5:22 pm
FS: Cantrell-Miller TT truck rear axle Sleeve Puller Tool (SOLD)

Last post by WaltM « Fri Jan 05, 2024 4:49 pm
Replies: 10
by WaltM » Sat Feb 18, 2023 2:52 pm

First post

SOLD Thanks, Walt

Last post

to the top

10 Replies

2278 Views

Last post by WaltM
Fri Jan 05, 2024 4:49 pm
FS: Bosch Accessory Distributor, Spacer, and Gear

Last post by WaltM « Fri Jan 05, 2024 4:48 pm
Replies: 6
by WaltM » Thu Jun 29, 2023 4:26 pm

First post

For Sale, Bosch Distributor, spacer and gear. Gears are in good shape, distributor cap has good center brush, condenser, and points. This type of Bosch distributor does not need to be connected to the spark rod. Price $300 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

6 Replies

1829 Views

Last post by WaltM
Fri Jan 05, 2024 4:48 pm
WTB bottom seat cushion 1911 runabout

Last post by BobP « Fri Jan 05, 2024 4:45 pm
Replies: 6
by BobP » Fri Dec 22, 2023 7:22 pm

First post

I am looking for an original bottom seat cushion for my 1911 open runabout. Original leather would be great, {good luck I know} Call 507 458 6778.

Last post

Thanks Roger, Bob.

6 Replies

1149 Views

Last post by BobP
Fri Jan 05, 2024 4:45 pm
FS 15 inch Brass Steering Wheel

Last post by ThreePedalTapDancer « Fri Jan 05, 2024 4:31 pm
Replies: 6
by ThreePedalTapDancer » Tue Dec 12, 2023 3:57 pm

First post

Brass steering wheel. Excellent condition, very nice heavy polished brass. No damage or dents. Wood tight and solid. 15 inch outside diameter. Nice wheel. They are no longer being reproduced or available. 400 includes shipping.

IMG_9694.jpeg

Last post

Very nice wheel

6 Replies

1509 Views

Last post by ThreePedalTapDancer
Fri Jan 05, 2024 4:31 pm
FS; APCO Rear Wheel/Hub Puller (SOLD)

Last post by Steves Ts « Fri Jan 05, 2024 4:12 pm
Replies: 1
by WaltM » Fri Jan 05, 2024 4:02 pm

First post

Puller (SOLD)

Last post

Hi Walter, I would like to purchase Your wheel puller.

Thanks

Steve

1 Replies

441 Views

Last post by Steves Ts
Fri Jan 05, 2024 4:12 pm
WANTED - Roadster Seats Springs

Last post by JR Ewing « Fri Jan 05, 2024 3:22 pm
Replies: 2
by JR Ewing » Fri Jan 05, 2024 11:00 am

First post

I am looking for the seat springs, cushion and backrest, for my 1918 Roadster. Thanks!

Last post

I know I can buy them new. Trying to find some original, if possible, before buying new. Thanks

2 Replies

521 Views

Last post by JR Ewing
Fri Jan 05, 2024 3:22 pm
1926-27 Gooseneck Spare Tire Carrier

Last post by TRDxB2 « Fri Jan 05, 2024 2:08 pm
Replies: 4
by Don Demio » Thu Jan 04, 2024 11:31 am

First post

WTB Model T Ford 1926 -27 Wire Wheel Gooseneck Carrier. Must have good end to attach under rear spring. Damaged tire mounting plate or bolt threads are not important. Carrier to be modified as a trailer hitch. Respond via email to ggunrunratattdot net. Thanks for your attention

Last post

WTB Model T Ford 1926 -27 Wire Wheel Gooseneck Carrier. Must have good end to attach under rear spring. Damaged tire mounting plate or bolt threads are not important. Carrier to be modified as a trailer hitch. Respond via email to ggunrunratattdot net. Thanks for your attention

The best way for members to contact you is for the to use the...

4 Replies

9868 Views

Last post by TRDxB2
Fri Jan 05, 2024 2:08 pm
Misc. Model T Parts $25 and Under

Last post by TRDxB2 « Fri Jan 05, 2024 1:07 am
Replies: 5
by Rodger Erickson » Sun Dec 24, 2023 3:50 pm

First post

For Sale: Miscellaneous Model T Parts. Shipping not included.

tparts05.jpg

Clockwise: 1917-1920 Coil Box Sheet Metal, needs straightening, $8; 23-25 Coupe? Front Body mounts, some pitting but still quite solid, $20 pair; 26-27 Fordor Steering Bracket T932C, $20; Raw casting in brass for reproduction early firewall bracket, $10; Heat stoves,...

Last post

Would like both of these of these. Can PayPal or check Shipping to 61265 (try USPS Ground Advantage maybe best)

5 Replies

10196 Views

Last post by TRDxB2
Fri Jan 05, 2024 1:07 am
WTB #65 ignition key

Last post by TRDxB2 « Fri Jan 05, 2024 12:51 am
Replies: 1
by Dennis_Brown » Thu Jan 04, 2024 10:18 pm

First post

I do not know how but over the last 50 years I have misplaced my ignition key # 65. I want to finish up some work on the motor and try to start it and an ignition key would make it a little easier.

Last post

I do not know how but over the last 50 years I have misplaced my ignition key # 65. I want to finish up some work on the motor and try to start it and an ignition key would make it a little easier.

Contact seller to see if still available. Price is includes free shipping

1 Replies

512 Views

Last post by TRDxB2
Fri Jan 05, 2024 12:51 am
Original Boyce Junior Motor Meter sold

Last post by Burlingtontguy « Thu Jan 04, 2024 9:49 pm
Replies: 1
by LuckyStrike1917 » Thu Jan 04, 2024 6:07 pm

First post

Complete, working, original Boyce Motor Meter, perfect for an original car or even for restoration. Threads on fine. Comes with an extra piece of glass to replace broken piece.
$100 obo plus shipping

Contact:
Via forum
Or
Jerontakacs@gmail.com
Or
734-895-5363

Will answer any questions and send more pictures if necessary

IMG_9616.jpeg...

Last post

Jeron, I'll take the Motor Meter, Dennis

1 Replies

689 Views

Last post by Burlingtontguy
Thu Jan 04, 2024 9:49 pm
PENDING speedometer gear FS

Last post by FordModelT9 « Thu Jan 04, 2024 9:19 pm
Replies: 3
by fordrelic » Sun Nov 12, 2023 7:46 pm

First post

I have a 64 T Stewart speedo gear For Sale. $60 plus shipping.

Please PM if you want to purchase. 64 t speedo gear.jpg

Last post

Clay, I want to buy your speedometer gear. Let me know how much it will be with shipping

3 Replies

990 Views

Last post by FordModelT9
Thu Jan 04, 2024 9:19 pm
SOLD: almost new brass sediment bulb with almost new petcock

Last post by Walt Wise « Thu Jan 04, 2024 9:15 pm
Replies: 1
by Walt Wise » Thu Jan 04, 2024 9:05 am

First post

This brass sediment bulb was not even used one month, since I really wanted a cast one and just couldn't paint this beautiful brass with black paint! The retail on the bulb is $64 and another $10 for the petcock. I am asking $65 total which includes FREE Shipping to any of the lower 48 contiguous states only. Paypal preferred, using the Family and...

Last post

Thanks MTFCA!!!

Walt Wise

1 Replies

540 Views

Last post by Walt Wise
Thu Jan 04, 2024 9:15 pm
FS: Brass Holley Model G "Pats Pend" Core

Last post by CDooREDW « Thu Jan 04, 2024 7:22 pm
Replies: 1
by Rodger Erickson » Sun Dec 31, 2023 8:13 pm

First post

For Sale: One Brass Holley Model G with Pats Pend on the cap, c. 1914 missing float and float bowl. The butterfly shafts are a little sloppy, it could use a rebuild. Asking $50 not including shipping.

thg01.jpg

thg02.jpg

Thanks for Looking!

Last post

Evening, Rodger,
Sent you an email.
Tnx,
Ron in HSV

1 Replies

582 Views

Last post by CDooREDW
Thu Jan 04, 2024 7:22 pm
Model T 26-27 Wheels For Sale. Item Removed

Last post by Mr. T Ford « Thu Jan 04, 2024 5:35 pm

by Mr. T Ford » Thu Jan 04, 2024 5:35 pm

Model T 26-27 Wheels For Sale.
3 Wheels Mounted With Tires And 1 Wheel Painted Red.
$600 Or Best Reasonable Offer.
Pick Up In Ct. Item Removed

0 Replies

723 Views

Last post by Mr. T Ford
Thu Jan 04, 2024 5:35 pm
Model T 26-27 Front Fenders For Sale.

Last post by Mr. T Ford « Thu Jan 04, 2024 5:27 pm

by Mr. T Ford » Thu Jan 04, 2024 5:27 pm

Model T 26-27 Front Fenders For Sale.

Both Fenders $500 or Best Reasonable Offer.

Pick Fenders Up In Ct.

0 Replies

690 Views

Last post by Mr. T Ford
Thu Jan 04, 2024 5:27 pm
SOLD: NH spray needle assembly, with U-joint and sleeve

Last post by Walt Wise « Thu Jan 04, 2024 1:57 pm
Replies: 3
by Walt Wise » Thu Jan 04, 2024 8:53 am

First post

Here is a new/never used Holley NH spray needle assembly, with U-joint and sleeve. I am asking $25 total which includes FREE Shipping to any of the lower 48 contiguous states only. Paypal preferred, using the Family and Friends option or a check will work too. If interested, I will provide needed info for payment. Thanks for looking!!! Walt Wise...

Last post

Much Thanks MTFCA !!!

Walt Wise

3 Replies

680 Views

Last post by Walt Wise
Thu Jan 04, 2024 1:57 pm
FS Manually Operated G. Piel Long Horn

Last post by ThreePedalTapDancer « Thu Jan 04, 2024 11:29 am
Replies: 1
by ThreePedalTapDancer » Sun Dec 31, 2023 2:14 pm

First post

Here is an original , excellent condition, manually operated brass bell “G. Piel” Long Horn 3. It is in nice working condition, and puts out a loud “Aaaawhooo!” when the plunger is depressed. Nice paint with a few small minor imperfections in the brass. Ready to mount and use. 275 includes shipping.

IMG_9851.jpeg

Last post

8.25 from rear of horn to front of bell.

1 Replies

655 Views

Last post by ThreePedalTapDancer
Thu Jan 04, 2024 11:29 am
Looking for a U&J intake manifold

Last post by Bruce Compton « Thu Jan 04, 2024 10:51 am
Replies: 6
by Bruce Compton » Wed Dec 27, 2023 11:17 pm

First post

Anyone out there have a decent U&J aluminum intake for sale?? Bruce

Last post

Still looking for a U&J intake. Jim's was not the correct one.

6 Replies

1296 Views

Last post by Bruce Compton
Thu Jan 04, 2024 10:51 am
Ross speedster steering gear F/S

Last post by Quickm007 « Thu Jan 04, 2024 9:52 am
Replies: 3
by Layden Butler » Mon Jan 01, 2024 3:25 pm

First post

Ross brand worm gear steering readily adapted to Model T Fords, asking $350. Can package for 48 state shipping.

Last post

Thank you Layden for the info, appreciated. Super interesting .

3 Replies

1271 Views

Last post by Quickm007
Thu Jan 04, 2024 9:52 am
For Sale: Kelsey 2845 rim

Last post by Allan « Wed Jan 03, 2024 10:58 pm
Replies: 1
by kevinf » Wed Jan 03, 2024 6:55 pm

First post

For Sale: I believe this is a Kelsey part number 2845 rim that uses the loose lugs and the flat bottom lug nuts. The bead around the inside of the rim is triangle in cross section. Please check the photos and verify before buying. The rim is 24 1/4 in diameter and should fit a 30x3.5 clincher. I gathered these up for a '20 Centerdoor, but have...

Last post

That is a nice one Kevin. Of the two Kelsey designs we have, that is the better one. The triangular ridge on the inside diameter is easy to line up on the felloe when fitting, allowing easy setting up with minimal run-out. A bonus is there is no slot where the lug foot engages like there is in the type with a rolled in ridge, so water cannot get...

1 Replies

490 Views

Last post by Allan
Wed Jan 03, 2024 10:58 pm
For Sale: 26-27 TT Hood shelves (new)

Last post by kevinf « Wed Jan 03, 2024 10:14 pm
Replies: 3
by kevinf » Wed Jan 03, 2024 6:11 pm

First post

For sale: 26-27 TT hood shelves, these are brand new sill in the wrapper, however they got a bit of moisture on the one end and have a small amount of surface rust. They are part number T 4056/57B and retail for $64.00, price is $30 plus shipping if you don't embarrass me by asking why I have two sets. :D
Email is best:

igotsumail2atgmaildotcom

Last post

My bad the part number is correct, for 23-25 high hood and the 26-27 TT.
Just looked it up in Snyder's catalog, which is probably where they came from.
Sorry for any confusion
Kevin

3 Replies

742 Views

Last post by kevinf
Wed Jan 03, 2024 10:14 pm
FS 3 to 1 ring and pinion

Last post by Bjerm « Wed Jan 03, 2024 6:41 pm

by Bjerm » Wed Jan 03, 2024 6:41 pm

Got this gear set with a ruckstell I bought that was in mid restoration. I switched back to standard gears These gears appear to have very little to no use. $350 obo plus shipping best way to reach me is by email bjerm10@gmail.com

0 Replies

762 Views

Last post by Bjerm
Wed Jan 03, 2024 6:41 pm
For Sale: rear windows

Last post by kevinf « Wed Jan 03, 2024 5:52 pm

by kevinf » Wed Jan 03, 2024 5:52 pm

For sale are two rear windows unknown what they fit.
First is a rectangle window marked Hastings, it measures 19 by 7 1/2 may be an aftermarket.
Second is an elongated octagon it measures 16 3/4 by 6 3/4
These measurements are overall so the window will be just a bit smaller
$40. each plus shipping
Email is best thanks

igotsumail2atgmaildotcom

0 Replies

617 Views

Last post by kevinf
Wed Jan 03, 2024 5:52 pm
26-27 Brass radiator shell Wanted

Last post by BRADLOWERY « Wed Jan 03, 2024 1:16 pm

by BRADLOWERY » Wed Jan 03, 2024 1:16 pm

I’m restoring a 26 roadster, I’d like a good brass Radiator shell to nickel plate. Anyone have one for sale? I see some that are basket cases. Call or text 330-858-2880

0 Replies

549 Views

Last post by BRADLOWERY
Wed Jan 03, 2024 1:16 pm
Oil Cloth Flags

Last post by SteveD « Wed Jan 03, 2024 11:01 am
Replies: 1
by WorldChamp1914 » Tue Jan 02, 2024 8:32 pm

First post

Who was selling those?

Last post

I think it was tim morsher (sp?)
He's not in the forum any more but shows up on Facebook

1 Replies

784 Views

Last post by SteveD
Wed Jan 03, 2024 11:01 am
FS 26-7 wire wheel lug nuts.

Last post by Lil Teezy « Wed Jan 03, 2024 9:54 am
Replies: 1
by Allan » Tue Jan 02, 2024 12:39 am

First post

21 original Lug nuts. Re-polished and re chrome plated. I did these for my speedster, but sold the car before getting around to swapping them over. $180 posted to your door. PayPal for payment.
Allan from down under. 20240101_152004.jpg 20240101_152017.jpg

Last post

Bling Bling! Let me get those! Sent an email and a p.m. Thanks Allan! Chris, in Boulder

1 Replies

560 Views

Last post by Lil Teezy
Wed Jan 03, 2024 9:54 am

New Topic

9308 topics

Page 51 of 94
- Jump to page:
Previous
1
…
49
50
51
52
53
…
94
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum