Classifieds - Parts - Page 56

Classifieds - Parts

New Topic

9001 topics

Page 56 of 91
- Jump to page:
Previous
1
…
54
55
56
57
58
…
91
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

78330 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Light switch horn buttons FS Sold

Last post by TRDxB2 « Thu Oct 12, 2023 6:26 pm
Replies: 1
by elliott1936 » Thu Oct 12, 2023 6:14 pm

First post

Three horn and light switch buttons with mounting for steering column. Only one mounting bracket. I think there is parts enough to make one complete horn and light button. $50.00 for all the parts with cost of postage to your location.
Tom five03-644-937four

Last post

I'll take them - can PayPal ship to 61265 email sent too

1 Replies

515 Views

Last post by TRDxB2
Thu Oct 12, 2023 6:26 pm
For sale used exhaust manifolds

Last post by Art M « Thu Oct 12, 2023 2:27 pm
Replies: 3
by Tim D » Mon Oct 09, 2023 9:43 am

First post

Exhaust manifolds They all have the droop. make me an offer. on them plus shipping.

Last post

These manifolds do not have the Ford script, hence the value is reduced. The value depends on how much they are wrapped and how good the threads are.

There are folks who successfully straightened them but only at about 50 percent. I have have a wrapped Ford manifold on the shelf that I don't want to try my luck. It would work on a trailer queen...

3 Replies

954 Views

Last post by Art M
Thu Oct 12, 2023 2:27 pm
NOS Bevin Carriage Bell (SOLD pending)

Last post by ThreePedalTapDancer « Thu Oct 12, 2023 1:45 pm

by ThreePedalTapDancer » Thu Oct 12, 2023 1:45 pm

Here is a rare find, an original 1920s (NOS New Old Stock)Bevin Carriage Foot Bell. This original bell is made from large 5.5 heavy brass with nickel plate. It has not been installed and only shows very minor shelf wear. It has beautiful nickel plating with a minor scuff here or there. It has a very loud and crisp “Ding Dong” that holds it tone...

0 Replies

366 Views

Last post by ThreePedalTapDancer
Thu Oct 12, 2023 1:45 pm
14-15 brake anti-rattlers fs. Sold

Last post by Model T Mark « Thu Oct 12, 2023 12:12 pm
Replies: 1
by CTLeonard » Thu Oct 12, 2023 10:43 am

First post

These are good solid brackets used in 14-15 due to the lack of stiffeners. I am confused (easily done) by there not being a right or left, or maybe I just don't have them, or there's not a right and left. The confusion thing again. I'd like 13.00 each plus shipping. ctleonard64@gmail.com 16971217007383709136855823276643.jpg...

Last post

I’ll take them all at 13 each. Need shipping to 49014 and how to pay you.

1 Replies

448 Views

Last post by Model T Mark
Thu Oct 12, 2023 12:12 pm
Ford speed knob fs

Last post by CTLeonard « Thu Oct 12, 2023 11:19 am

by CTLeonard » Thu Oct 12, 2023 11:19 am

Don't have the lower bracket, shouldn't be hard to make one. 5.00 plus shipping. ctleonard64@gmail.com 16971238784081151105756148597682.jpg 16971239018227589943837587395965.jpg 16971239226546906171727293208457.jpg

0 Replies

432 Views

Last post by CTLeonard
Thu Oct 12, 2023 11:19 am
26-7 coil box lids fs. Sold

Last post by CTLeonard « Thu Oct 12, 2023 10:59 am

by CTLeonard » Thu Oct 12, 2023 10:59 am

Couple decent lids. One is a little pitted. 15.00 each plus shipping. ctleonard64@gmail.com 16971227051673757037738363044357.jpg 16971227360383969500704011954265.jpg

0 Replies

248 Views

Last post by CTLeonard
Thu Oct 12, 2023 10:59 am
For sale ribbed hi low pedal SOLD

Last post by Tim D « Thu Oct 12, 2023 10:57 am

by Tim D » Thu Oct 12, 2023 10:57 am

$35 nice high low pedal.plus shipping.

0 Replies

337 Views

Last post by Tim D
Thu Oct 12, 2023 10:57 am
Wtb Top socket brass piece

Last post by Tim D « Thu Oct 12, 2023 9:30 am
Replies: 4
by Tourabout » Mon Oct 02, 2023 9:49 am

First post

Has anyone got two of these they would want to sell? There is a male and a female and when the top sockets are down they nest together as in the picture.
I need two males.

Last post

sorry didn't have any.

4 Replies

901 Views

Last post by Tim D
Thu Oct 12, 2023 9:30 am
New Radiator inlet FS

Last post by Shannon_in_Texas « Thu Oct 12, 2023 7:21 am
Replies: 6
by Dan Hatch » Fri Sep 15, 2023 3:27 pm

First post

Here is a solid red brass upper radiator inlet I found setting on a shelf. Don’t know where I got or when, must have come in batch of stuff I brought. Anyway, doesn’t matter. I don’t think I will ever use it. $30 + shipping or pickup at Hershey. Email me at address in pictures. Thanks Dan
IMG_3145.jpeg
IMG_3146.jpeg
IMG_3147.jpeg...

Last post

Dan,
Email sent about this inlet. Thanks!

6 Replies

944 Views

Last post by Shannon_in_Texas
Thu Oct 12, 2023 7:21 am
1915 Horn Button FS

Last post by Dan Hatch « Thu Oct 12, 2023 7:10 am
Replies: 8
by Dan Hatch » Tue Sep 12, 2023 11:48 am

First post

Here is a 15 horn button, mostly just the ring. I have the 2 screws that mount it also. Look at pictures, what you see is what you get. $20+ shipping. Email me at address in the pictures. Thanks Dan.
IMG_3139.jpeg
IMG_3140.jpeg
IMG_3142.jpeg
IMG_3143.jpeg
IMG_0260.jpeg

Last post

Back to the top

8 Replies

1193 Views

Last post by Dan Hatch
Thu Oct 12, 2023 7:10 am
WTB - Pair of E & J cowl lanterns - 1923 TT FOUND

Last post by TheSaintDiscJockey « Thu Oct 12, 2023 6:05 am
Replies: 2
by TheSaintDiscJockey » Wed Oct 11, 2023 5:09 am

First post

Want to purchase a pair of E & J cowl lanterns for a 1923 Model TT.

Please pm, or text 609 nine 2 zero four 22 zero. Many thanks in advance!

Lamps located.
Many thanks 😊!

Last post

Text sent.

2 Replies

601 Views

Last post by TheSaintDiscJockey
Thu Oct 12, 2023 6:05 am
For Sale: Lightly Used Engine Parts

Last post by RajoRacer « Wed Oct 11, 2023 9:07 pm
Replies: 2
by RajoRacer » Mon Oct 09, 2023 10:21 pm

First post

These parts came out of a low mileage, broken crankshaft engine. .010 under main bearings w/bolts & shims, 3 good .060 over aluminum pistons, 4 .030 under rods - one is slightly bent - will need straightening, crank gear, modern valves, keepers & springs - advanced nylon gear w/special nut also available - I'd take $500.00 including Priority Mail...

Last post

All but the 3 pistons spoken for - thanks MTFCA !

2 Replies

687 Views

Last post by RajoRacer
Wed Oct 11, 2023 9:07 pm
WTB Shipping Box for Brass Radiator

Last post by Runabout « Wed Oct 11, 2023 5:45 pm
Replies: 7
by buff6345 » Tue Oct 10, 2023 10:54 am

First post

Want to buy the shipping box and packaging used by Brassworks to ship a new brass radiator

Last post

I took one to the UPS pack N ship store, they packed and sent it to the buyer for $80-$90 bucks. Never heard any complaints…

7 Replies

1109 Views

Last post by Runabout
Wed Oct 11, 2023 5:45 pm
Sold - Splitdorf 1/2" Pipe Spark Plugs

Last post by CudaMan « Wed Oct 11, 2023 4:41 pm
Replies: 2
by CudaMan » Wed Oct 11, 2023 3:11 pm

First post

For some reason, I seem to accumulate spark plugs. I have more than I need, so I'm offering my Splitdorf spark plugs for sale, see pics.

I have a total of 14, all will fit a Model T or any other car that uses 1/2 pipe thread. A few have pitting from age and perhaps light use, but most appear to be NOS. All come with boxes as shown. There are two...

Last post

All 14 plugs are sold to Larry, thanks Larry and MTFCA! :)

2 Replies

521 Views

Last post by CudaMan
Wed Oct 11, 2023 4:41 pm
FS Model T Distributor SOLD

Last post by 25tfire « Wed Oct 11, 2023 2:12 pm

by 25tfire » Wed Oct 11, 2023 2:12 pm

FS is a used Bosch Model T Distributor complete set with all of the parts, 2 piece rod type in good condition. Asking $250 plus shipping. Pictures available to you by email or text. SOLD Thank You Larry and MTFCA

0 Replies

479 Views

Last post by 25tfire
Wed Oct 11, 2023 2:12 pm
FS 1926-27 Front Engine Mount - Spring Clip

Last post by TRDxB2 « Wed Oct 11, 2023 1:46 am

by TRDxB2 » Wed Oct 11, 2023 1:46 am

Zoom in on pictures to see details ( condition, Ford script and/or part numbers). All were de-rusted and primed. #1 paint gloss black & couldn't find part number on the mount.
#1 - $65 plus shipping
#2 - $75 plus shipping SOLD
Shipping should be around $10. Prefer PayPal to Family/Friends to my email , will take a check
This is link to all the...

0 Replies

361 Views

Last post by TRDxB2
Wed Oct 11, 2023 1:46 am
FS 1921-25 Front Engine Mount - Spring Clip

Last post by TRDxB2 « Wed Oct 11, 2023 1:39 am

by TRDxB2 » Wed Oct 11, 2023 1:39 am

Zoom in on pictures to see details ( condition, Ford script and/or part numbers). Threads appear to be good with #2 having some damage. All were de-rusted and primed.
#1 - $65 plus shipping
#2 - $60 plus shipping
#3 - $65 plus shipping
Shipping should be around $10. Prefer PayPal to Family/Friends to my email , will take a check
This is link to...

0 Replies

323 Views

Last post by TRDxB2
Wed Oct 11, 2023 1:39 am
WTB: 1911-1912 Heinz Coils

Last post by KWTownsend « Tue Oct 10, 2023 9:00 pm
Replies: 1
by michaelb2296 » Tue Oct 10, 2023 4:44 pm

First post

Let me know…. Thanks!

Last post

There are a couple on T-bay...

1 Replies

465 Views

Last post by KWTownsend
Tue Oct 10, 2023 9:00 pm
Stewart Warner Hand Horn

Last post by Lawrence « Tue Oct 10, 2023 3:23 pm
Replies: 5
by ThreePedalTapDancer » Thu Oct 05, 2023 6:36 pm

First post

Original Brass Stewart Warner hand horn. Mounts onto of the door section. Emits a loud “Awwwoooooo!” when plunger is depressed. Nice clean condition, with some minor small scratches/imperfections on brass bell. Internals intact and working as designed. 250.00 includes shipping US.
IMG_9035.jpeg

Last post

I'm very interested in purchasing if your happy to send to new zealand. Thanks Chris

5 Replies

986 Views

Last post by Lawrence
Tue Oct 10, 2023 3:23 pm
16" od steering wheel fs. Sold

Last post by Haroldc30 « Tue Oct 10, 2023 12:45 pm
Replies: 1
by CTLeonard » Tue Oct 10, 2023 11:25 am

First post

Very usable wheel. 16 O.D. 20.00 plus shipping. ctleonard64@gmail.com 16969514201235538088040967235899.jpg 16969514413013711882647175152061.jpg 16969514841733035285429777131394.jpg

Last post

Email sent

1 Replies

394 Views

Last post by Haroldc30
Tue Oct 10, 2023 12:45 pm
Trade Only; Hardback 1925 Fordex Manual for 1926-27 Fordex Manual

Last post by ModelTWoods « Tue Oct 10, 2023 12:40 pm

by ModelTWoods » Tue Oct 10, 2023 12:40 pm

Trade Only: Original Hardback 1925 copyright Fordex sales manual published by Sales Equipment Company, Detroit in excellent condition. No writing, marking, tears or dog eared pages. Only flaw in condition is the turning of pages from white to tan from age.

Will TRADE ONLY for Original hardback 1926 or 27 copyright Fordex sales manual in EQUAL...

0 Replies

287 Views

Last post by ModelTWoods
Tue Oct 10, 2023 12:40 pm
6v Voltage Regulators - FREE Shipping for forum members

Last post by AdminJeff « Tue Oct 10, 2023 12:38 pm

by AdminJeff » Tue Oct 10, 2023 12:38 pm

Use Coupon code FORUM when you check out on my site and get FREE SHIPPING on regulators and cutouts

I'm still looking for more old original Ford Cutouts - I salvage the tops for my regulators.

Jeff

0 Replies

443 Views

Last post by AdminJeff
Tue Oct 10, 2023 12:38 pm
FS EARLY REBUILT SHORT BLOCK

Last post by Mark Chaffin « Tue Oct 10, 2023 11:15 am
Replies: 10
by Mark Chaffin » Sun Oct 08, 2023 12:22 pm

First post

Nice rebuilt early short block (01/13). New valves, lifters, springs, keepers, camshaft and crank gear. Reground camshaft and rebabbited bearings. New babbit mains and rods. Crank looks to be .010 under. Pistons .040 over. Also includes a nice low head.
Price is $3,000. Crated and can be shipped. Mark Chaffin (951) 805-0928

Last post

Pending sold to David.

10 Replies

1431 Views

Last post by Mark Chaffin
Tue Oct 10, 2023 11:15 am
Snow chains fs. Sold

Last post by CTLeonard « Tue Oct 10, 2023 10:46 am

by CTLeonard » Tue Oct 10, 2023 10:46 am

Two styles of chains. 10.00 for the pair plus shipping 16969491236228423417067819924200.jpg

0 Replies

327 Views

Last post by CTLeonard
Tue Oct 10, 2023 10:46 am
FOUND A pair of bail door handles for Coupe

Last post by Barry Loucks « Tue Oct 10, 2023 10:42 am

by Barry Loucks » Tue Oct 10, 2023 10:42 am

I’m looking for a pair of Bail Door handles for a coupe.

Barry

Three one three- 727-two one six zero

0 Replies

352 Views

Last post by Barry Loucks
Tue Oct 10, 2023 10:42 am
WTB Fulton Exhaust Cutout

Last post by VasaTrail « Tue Oct 10, 2023 10:34 am

by VasaTrail » Tue Oct 10, 2023 10:34 am

Anyone have a Fulton exhaust cutout in working order that they are willing to part with?

0 Replies

290 Views

Last post by VasaTrail
Tue Oct 10, 2023 10:34 am
Accelerated pedal fs. Sold

Last post by CTLeonard « Tue Oct 10, 2023 10:22 am

by CTLeonard » Tue Oct 10, 2023 10:22 am

25.00 plus shipping. ctleonard64@gmail.com 16969477459401190959104704819738.jpg

0 Replies

320 Views

Last post by CTLeonard
Tue Oct 10, 2023 10:22 am
For sale unmachined brass spider SOLD

Last post by ThreePedalTapDancer « Tue Oct 10, 2023 10:01 am
Replies: 1
by Tim D » Tue Oct 10, 2023 9:03 am

First post

Unmachined brass spider perfect for speedster project with a different steering column. $100 plus shipping
Offset is 2 3/4

Last post

Email sent

1 Replies

469 Views

Last post by ThreePedalTapDancer
Tue Oct 10, 2023 10:01 am
Buffalo wire wheels

Last post by tselliott « Tue Oct 10, 2023 2:13 am
Replies: 14
by tselliott » Fri Mar 31, 2023 2:31 am

First post

This is a nice solid set of wire wheels with Coker white wall tires. 30 x 3-1/2 Tires have never been run. No bent, loose, or missing spokes. There is some pitting on the rims and some flaking paint. Overall a nice set of buffalo wire wheels.
$2600
Scott Elliott
971-5O6-94O2

Last post

Bump to the top.
For those that might be interested I have checked shipping a couple of different times. About $250-$350 depending on business or residential delivery and location. I would be willing to check shipping again if somebody was interested.
Thanks,
Scott

14 Replies

4964 Views

Last post by tselliott
Tue Oct 10, 2023 2:13 am
Found! Wanted starter motor cover plates

Last post by KWTownsend « Mon Oct 09, 2023 10:36 pm
Replies: 7
by KWTownsend » Sat Oct 07, 2023 8:45 pm

First post

I'm looking for the block off covers where a starter motor goes on a late hogshead.

20231007_173648.jpg

20231007_173700.jpg

Thanks,

Keith

: ^ )

Last post

Parts found. Thanks, guys!

7 Replies

1012 Views

Last post by KWTownsend
Mon Oct 09, 2023 10:36 pm
Speedster hand air pump with gauge F/S

Last post by blauvelt « Mon Oct 09, 2023 10:30 pm
Replies: 2
by Layden Butler » Fri Oct 06, 2023 3:11 pm

First post

Pump to pressurize the gas tank, included is a new modern 5 pound gauge. $145 domestic shipping included.

Last post

Dropped and email. Thanks.

2 Replies

615 Views

Last post by blauvelt
Mon Oct 09, 2023 10:30 pm
FS Stewart Model 150/102

Last post by JBog « Mon Oct 09, 2023 9:35 pm

by JBog » Mon Oct 09, 2023 9:35 pm

This is my eBay listing.

0 Replies

441 Views

Last post by JBog
Mon Oct 09, 2023 9:35 pm
Spark plugs for sale

Last post by Larry Debaugh « Mon Oct 09, 2023 8:35 pm
Replies: 1
by Larry Debaugh » Sun Oct 08, 2023 1:31 pm

First post

4 Champion X metal top, Ford Script, new $180. 4 Champion 31 ,Ford Script, new $160. 4 Champion X straight side w/Pat. $180 used nice. 3 Kingston appear new $100 . 4 Firestone E100 used $80. All plus postage Larry Debaugh 4103361728

Last post

The Champion plugs are sold, still have the Kingston and Firestone…. Larry Debaugh 4103361728

1 Replies

660 Views

Last post by Larry Debaugh
Mon Oct 09, 2023 8:35 pm
ID non Ford water pump

Last post by t-time « Mon Oct 09, 2023 7:14 pm

by t-time » Mon Oct 09, 2023 7:14 pm

Cast numbers: MO-160-A, MO-161-A

0 Replies

466 Views

Last post by t-time
Mon Oct 09, 2023 7:14 pm
Unknown brackets fs. Sold

Last post by Sean Butler « Mon Oct 09, 2023 6:38 pm
Replies: 4
by CTLeonard » Mon Oct 09, 2023 2:10 pm

First post

In with t-parts, but don't have a clue what they are for. Seems they could be an important part. If you have to have them shoot me an offer. ctleonard64@gmail.com 16968747692994472744833279720620.jpg 16968749170844937324743766655165.jpg 16968749898725858258438342141574.jpg

Last post

Those are very desirable acetylene tank brackets. Much quicker to use than the full clamp/strap type. Not so sure as to the years the 2 were produced/used.

4 Replies

868 Views

Last post by Sean Butler
Mon Oct 09, 2023 6:38 pm
Cleanin up the shop - punch press tooling

Last post by Brent Reeb « Mon Oct 09, 2023 5:15 pm
Replies: 1
by Kevin Pharis » Sun Oct 08, 2023 1:54 pm

First post

Someone has to have an iron worker or kick punch that uses 1” upper punch and 2” lower die tooling. You can have what I’ve got for the cost of shipping! Email thru the forum please

81B5C501-7EF4-47F4-A34D-395134874CB1.jpeg

Last post

Hello,
Please send cost bwreeb@comcast.net
or I can send you UPS #
Thank you
Brent

1 Replies

614 Views

Last post by Brent Reeb
Mon Oct 09, 2023 5:15 pm
FS Bronze Kingston L4

Last post by Gen3AntiqueAuto « Mon Oct 09, 2023 1:51 pm
Replies: 1
by Gen3AntiqueAuto » Sat Oct 07, 2023 9:35 am

First post

Bronze (1915?) Kingston L4 for sale - see video for details.

Last post

Bumping the post up for those that didn't see it.

1 Replies

295 Views

Last post by Gen3AntiqueAuto
Mon Oct 09, 2023 1:51 pm
Cleanin up the shop - case hardening compounds

Last post by Kevin Pharis « Mon Oct 09, 2023 12:38 pm
Replies: 1
by Kevin Pharis » Sun Oct 08, 2023 2:00 pm

First post

Do your own heat treating…? These cans are unopened and yours for $50. Also will include a 3lb jar of cast iron shavings. Email thru the forum please

CEA100C9-C58D-42CF-B329-D9BC4DA59A30.jpeg

Last post

Sold! Thanks Gene!

1 Replies

538 Views

Last post by Kevin Pharis
Mon Oct 09, 2023 12:38 pm
For sale original carbide tank top Brass

Last post by Tim D « Mon Oct 09, 2023 9:52 am

by Tim D » Mon Oct 09, 2023 9:52 am

Very nice top. One crack on edge see picture. $200 plus shipping. Maybe very hard to find an original this nice.

0 Replies

460 Views

Last post by Tim D
Mon Oct 09, 2023 9:52 am
Kingston Coil Unit

Last post by Woody23 « Sun Oct 08, 2023 8:34 pm
Replies: 1
by Serge » Sun Oct 08, 2023 11:19 am

First post

Wanted Kingston Hight Bridge Coil Unit

Last post

Hello Serge,

I make and rebuild Kingston coils.

Call or email me.

David Woods
Williamston T Works (Facebook)
517-927-9232
Dwtworks@gmail.com

1 Replies

535 Views

Last post by Woody23
Sun Oct 08, 2023 8:34 pm
For Sale: 1912 Jno Brown Model 105 Tail Lamp

Last post by John Haynes « Sun Oct 08, 2023 5:07 pm
Replies: 6
by John Haynes » Sun Jun 20, 2021 5:05 pm

First post

For Sale is a Jno Brown model 105 Brass Tail Lamp. I believe this to be correct for 1912. There is a small crack on the mounting bracket that will need to be soldered. Asking $450.00 plus shipping. Please email me with questions or more photos.

Last post

The tail Lamp has been sold.

6 Replies

2545 Views

Last post by John Haynes
Sun Oct 08, 2023 5:07 pm
Misc. engine parts, ect.

Last post by Bodyman.315 « Sun Oct 08, 2023 4:39 pm
Replies: 1
by NU2theT » Mon Oct 02, 2023 4:46 pm

First post

Have various engine blocks, one 21 block with crank/piston and cam in place, 4 heads , various pedals and 26/27 transmission. 1 early and 1 later magneto. Everything $300.00 and it all goes together, local pick up only. Email would be the best to reach me.

Last post

Hi this Eric are these parts still available?

1 Replies

730 Views

Last post by Bodyman.315
Sun Oct 08, 2023 4:39 pm
Cleanin up the shop - cast brass script

Last post by Kevin Pharis « Sun Oct 08, 2023 4:39 pm
Replies: 2
by Kevin Pharis » Sun Oct 08, 2023 1:05 pm

First post

Cast brass Ford script with just the right amount of patina. $30 includes flat rate USPS in the lower 48. Email thru forum please

(Fender not included😉)

24DC194F-B6E7-40C6-AE0D-08172BF509D3.jpeg

Last post

Sold to David!

2 Replies

758 Views

Last post by Kevin Pharis
Sun Oct 08, 2023 4:39 pm
Cleanin up the shop - drill chuck arbors

Last post by Kevin Pharis « Sun Oct 08, 2023 4:38 pm
Replies: 1
by Kevin Pharis » Sun Oct 08, 2023 2:12 pm

First post

Who has a lathe or drill press that uses a #2 Morse taper…? Here are 2 3/8-24 threaded drill chuck arbors and 2 #0 Jacobs taper arbors. These are new and unused Jacobs brand arbors. All for $30 shipped within the lower 48

397E5BBE-1871-4845-A113-95BF9B8755AF.jpeg

Last post

Sold to Marc!

1 Replies

521 Views

Last post by Kevin Pharis
Sun Oct 08, 2023 4:38 pm
Clean 20" Wire Wheels, Tires, Tubes, and Flaps

Last post by NorthSouth « Sun Oct 08, 2023 1:21 pm
Replies: 1
by NorthSouth » Sun Oct 08, 2023 1:18 pm

First post

Four clean 20” wire wheels
With tires tubes, flaps, Rocky Mountain Brake drums, and Ford drums, and brass knock-off hubs, and hub wrench. No-name brass.
Los Angeles.
$2,500.00 ...or best offer
Jim; six 2 six 788-63 thirty-four

Last post

Hub wrench

1 Replies

705 Views

Last post by NorthSouth
Sun Oct 08, 2023 1:21 pm
Looking for

Last post by Joe Bell « Sun Oct 08, 2023 8:39 am
Replies: 4
by Dollisdad » Sat Oct 07, 2023 8:33 am

First post

2 rear wheel hubs with small brake drums. 12 hub bolts and nuts. 1pr. early front fender irons. 1pr. 26-27 spindles. 1 straight spindle arm. 1 set 09-10 hud caps. Early front motor mount. Bottom leaf for rear spring. Rear spring u bolt set. Early no hump spool. Thanks.

Last post

I may have the fender irons for the forked lights but no eyelet ones for top strap?

4 Replies

927 Views

Last post by Joe Bell
Sun Oct 08, 2023 8:39 am
Firestone 440/450-21 whitewall tires

Last post by bobster1 « Sun Oct 08, 2023 6:02 am
Replies: 2
by bobster1 » Wed Sep 27, 2023 6:19 am

First post

I have 4 Firestone 440/450-21 tires with rubber stem tubes. 2 3/8” wide white walls. I took these off my speedster and have less that 500 miles on them, approx 5 years old. New cost $1412.00 plus tax and freight. These are like new and will be at Hershey for pickup (I will not ship) Sell for $800 cash. Space 1695805696779blob.jpeg RWI 18-21...

Last post

Sold at Hershey!

2 Replies

704 Views

Last post by bobster1
Sun Oct 08, 2023 6:02 am
Bermuda Bell

Last post by bobster1 « Sun Oct 08, 2023 5:28 am
Replies: 2
by bobster1 » Fri Sep 29, 2023 10:56 am

First post

Authentic Original Bermuda Bell in great shape, dings as it should! $225 with free delivery to Hershey, RED Field RWI 18-20 or shipped at cost.

Last post

thanks for the interest, the bell was sold at Hershey.

2 Replies

934 Views

Last post by bobster1
Sun Oct 08, 2023 5:28 am
WTB: RaJo intake manifold

Last post by Mark Chaffin « Sat Oct 07, 2023 10:56 pm
Replies: 5
by Mark Anderson » Sat Oct 07, 2023 10:43 am

First post

Looking for a Intake Manifold for a #35 RaJo Head. Chaffins are currently out of them.

Last post

That one is in excellent overall condition. Usually they are cracked right down the center.

5 Replies

872 Views

Last post by Mark Chaffin
Sat Oct 07, 2023 10:56 pm
WTB - 25 drivers side rear fender

Last post by Gen3AntiqueAuto « Sat Oct 07, 2023 8:09 pm
Replies: 2
by Gen3AntiqueAuto » Mon Oct 02, 2023 9:39 am

First post

Helping a friend - he's looking for a 1925 left rear sedan fender.

Last post

I believe he's still looking for one.

2 Replies

332 Views

Last post by Gen3AntiqueAuto
Sat Oct 07, 2023 8:09 pm
WTB. Rebuilt short block..

Last post by Gen3AntiqueAuto « Sat Oct 07, 2023 8:07 pm
Replies: 3
by ModelT1909 » Fri Oct 06, 2023 12:34 pm

First post

No luck at Hershey.. looking to buy a rebuilt T short block . Or one that they know to be in excellent condition.. year doesn't matter... 14 to 27.. Thank You.. my email is modelt09@maine.rr.com or builder1@maine.rr.com.

Last post

I have a 27 here all done - you should have swung in on your way past me!

No luck at Hershey.. looking to buy a rebuilt T short block . Or one that they know to be in excellent condition.. year doesn't matter... 14 to 27.. Thank You.. my email is modelt09@maine.rr.com or builder1@maine.rr.com.

3 Replies

749 Views

Last post by Gen3AntiqueAuto
Sat Oct 07, 2023 8:07 pm
15 coil box lids fs. Sold

Last post by JTT3 « Sat Oct 07, 2023 6:02 pm
Replies: 1
by CTLeonard » Sat Oct 07, 2023 9:11 am

First post

Got a pair of later 15 coil box lids. One is kind of beat up with a hole drilled in it, the other is straight but has pitting. Along the front lip you can see daylight, and is missing a latch. Get both for 25.00 plus shipping. ctleonard64@gmail.com 1696684181173139756149780334087.jpg 16966841996582494064761143355412.jpg...

Last post

Message sent, sold!

1 Replies

412 Views

Last post by JTT3
Sat Oct 07, 2023 6:02 pm
WTB Buffalo wrench

Last post by RajoRacer « Sat Oct 07, 2023 3:31 pm
Replies: 1
by mklooksup » Sat Oct 07, 2023 2:33 pm

First post

I would like to buy a Buffalo wheel wrench, I know they are hard to find but I'm
giving it a shot.

Thanks

Manny

Last post

Kevin Pharis manufacturers new ones - piece of art !!!

1 Replies

356 Views

Last post by RajoRacer
Sat Oct 07, 2023 3:31 pm
WTB early Champion X plugs

Last post by havnfun « Sat Oct 07, 2023 11:09 am
Replies: 8
by havnfun » Tue Sep 26, 2023 11:34 pm

First post

Howdy,

I’m looking for some early champion X plugs

Last post

Mark, 1912 and a 1913

8 Replies

1117 Views

Last post by havnfun
Sat Oct 07, 2023 11:09 am
FS Hand Klaxon Ahooga Horn (SOLD pending)

Last post by ThreePedalTapDancer « Sat Oct 07, 2023 11:07 am
Replies: 4
by ThreePedalTapDancer » Fri Sep 15, 2023 5:32 pm

First post

Very nice original restored brass and black “Hand Klaxonet” ahooga horn. Nice paint and brass. Internals intact and operating as designed. Works great, very clean and loud. 300 includes shipping US.

IMG_8926.jpeg

Last post

Great looking horn

4 Replies

761 Views

Last post by ThreePedalTapDancer
Sat Oct 07, 2023 11:07 am
re-babbitted connecting rod ( singles)

Last post by Gene_French « Sat Oct 07, 2023 10:45 am
Replies: 6
by Gene_French » Tue Jul 18, 2023 10:27 am

First post

I have several re-babbitted connecting rods that are separate from sets ... this can be very handy for instances where you are on tour and loose a connecting rod ... a spare rod can save the event ! I have 2 Standard diameter rods ... 1 -.010 diameter rod ... 2 -.020 diameter rods ,and 1 -.030 diameter rod ...rods are re-babbitted , X grooved ,...

Last post

Allan:
sent an email to the address you sent me ...have a servicable rod here ... pay postage to Au. and it's yours ...Gene French

6 Replies

982 Views

Last post by Gene_French
Sat Oct 07, 2023 10:45 am
Fender eye bolts fs. Sold

Last post by CTLeonard « Sat Oct 07, 2023 10:04 am

by CTLeonard » Sat Oct 07, 2023 10:04 am

Four fender eye bolts fs. 30.00 plus shipping. ctleonard64@gmail.com

0 Replies

278 Views

Last post by CTLeonard
Sat Oct 07, 2023 10:04 am
Straight spindle arm fs

Last post by CTLeonard « Sat Oct 07, 2023 10:01 am

by CTLeonard » Sat Oct 07, 2023 10:01 am

Have a t-270 spindle arm with good threads. 40.00 plus shipping. ctleonard64@gmail.com 16966872122381575089619692325904.jpg 16966872295764341670855755704459.jpg 16966872500071996448034468627658.jpg

0 Replies

301 Views

Last post by CTLeonard
Sat Oct 07, 2023 10:01 am
FS Brass Radiator

Last post by buff6345 « Sat Oct 07, 2023 9:31 am
Replies: 1
by YellowTRacer » Sat Oct 07, 2023 2:39 am

First post

Not sure who made this but I assume the Brassworks. Was on a car for a short time several years ago and has been in storage ever since. $850.00

Ed aka #4

Last post

sent email

1 Replies

611 Views

Last post by buff6345
Sat Oct 07, 2023 9:31 am
WTB Ruckstell left hand shift linkage

Last post by Woody23 « Sat Oct 07, 2023 8:41 am

by Woody23 » Sat Oct 07, 2023 8:41 am

Hello, I have a Ruckstell rear wind but missing all the linkage. So looking for all the parts to connect it, I prefer the left hand shift.

Thanks

David
Williamston, Mi

0 Replies

402 Views

Last post by Woody23
Sat Oct 07, 2023 8:41 am
WTB Seat Cover Hinges

Last post by adam13 « Fri Oct 06, 2023 10:37 pm

by adam13 » Fri Oct 06, 2023 10:37 pm

Want to buy 3 seat cover hinges like the one pictured. Please email at ajeyre13@icloud.com.

0 Replies

305 Views

Last post by adam13
Fri Oct 06, 2023 10:37 pm
What are these?

Last post by rwephill « Fri Oct 06, 2023 7:05 pm
Replies: 3
by rwephill » Fri Oct 06, 2023 10:42 am

First post

I am gradually working my way to restoring a '25 TT C-Cab from parts. This forum and the knowledge of the members has been critical in me figuring out what things are and how they fit together. In all of my parts I found these. Can anyone tell me what they are or if they are even part of this vehicle? There is definitely one for left and one for...

Last post

Thanks Stephen. I would have never gotten that on my own. I appreciate the description and the picture.

3 Replies

945 Views

Last post by rwephill
Fri Oct 06, 2023 7:05 pm
Accessory Do-Ray Cuckoo Dash Horn (SOLD pending)

Last post by ThreePedalTapDancer « Fri Oct 06, 2023 5:10 pm
Replies: 1
by ThreePedalTapDancer » Fri Oct 06, 2023 5:08 pm

First post

Here is an original very rare early Doray Cuckoo Horn. It was made by the Do-Ray Lamp Company, which is interesting because they were known for safety lights and reflectors. This model is early, with a pat pending stamp. It has a removable mounting bracket. Later versions had a fixed mounting bracket. It was designed to mount to the outside of the...

Last post

IMG_9065.jpeg

1 Replies

508 Views

Last post by ThreePedalTapDancer
Fri Oct 06, 2023 5:10 pm
Brass Steering Wheel (SOLD)

Last post by Fire_chief « Fri Oct 06, 2023 2:40 pm
Replies: 1
by ThreePedalTapDancer » Fri Oct 06, 2023 2:13 pm

First post

Cast polished brass steering wheel. 15 inches diameter. Nice condition and polish. Has some minor pitting and blems on the bottom side, top near perfect. Wood is very nice no damage or separation. Ready to mount and use. These are not being reproduced anymore. 425 includes shipping US.

IMG_9046.jpeg

Last post

Sent email

1 Replies

506 Views

Last post by Fire_chief
Fri Oct 06, 2023 2:40 pm
SOLD!!!!

Last post by GGZ « Fri Oct 06, 2023 10:19 am
Replies: 10
by GGZ » Wed Jun 21, 2023 12:14 pm

First post

SOLD!!!!!!!!

Last post

SOLD!!!!!!!!!

10 Replies

2280 Views

Last post by GGZ
Fri Oct 06, 2023 10:19 am
FS 1925 GE Refridgerator

Last post by Henry K. Lee « Fri Oct 06, 2023 7:40 am
Replies: 3
by Henry K. Lee » Mon Sep 11, 2023 4:46 pm

First post

Perfect for your Model T Bedroom, Fully restored and works really well. $1,200.00. Email if interested.

Hank

IMG_0393.jpeg

IMG_0392.jpeg

IMG_0390.jpeg

IMG_0389.jpeg

IMG_0388.jpeg

Last post

New price...., $1,000.00.

Hank

3 Replies

1389 Views

Last post by Henry K. Lee
Fri Oct 06, 2023 7:40 am
Voltage Regulators - I Need To Buy: OLD Cutouts!

Last post by Allan « Fri Oct 06, 2023 7:13 am
Replies: 40
by AdminJeff » Thu Aug 10, 2023 9:16 pm

First post

Im looking to buy/trade for old cutouts. I'm building diode cutouts and Model T & Model A voltage regulators and I have the bases I'm currently manufacturing, but the cans I'm thinking of ordering have an 8-10 week lead time from manufacturing .

The specific cutouts/tops I'm looking for are these - they have the rectangular notches in the base....

Last post

The model T cut outs with which I am familiar have the two terminals on the flat. Any cutout with an output screw on the side is likely for a model A or something later. That said, on the Ebay listing, only the two on the lower left of the offering are T model items.

Hope this focuses attention.
Allan from down under.

40 Replies

6366 Views

Last post by Allan
Fri Oct 06, 2023 7:13 am
FS Winfield 5v Carburetor (SOLD)

Last post by Kevin Pharis « Thu Oct 05, 2023 10:46 pm
Replies: 6
by ThreePedalTapDancer » Tue Jul 25, 2023 7:21 pm

First post

Here is a nice original Winfield 5V, aluminum bodied updraft racing carburetor. It is complete with nice barrel float. Everything moves as it should and is very clean. Perfect for an era correct speedster or dirt track racer. 1-3/8 flange opening. Impossible to find, very rare. Perfect to restore to operating condition and use. 550 includes...

Last post

Thanks for throwing my hat in the ring Ed. I do not inventory any parts for the H/V series carbs. But, I have made several parts before and always catalog the designs as I go. The fuel strainer bowl has yet to make the list, but have made throttle barrels and float seats before. Happy to share these if someone needs…

6 Replies

1503 Views

Last post by Kevin Pharis
Thu Oct 05, 2023 10:46 pm
WTB Door for a John Brown 115 Taillight

Last post by DontKnowMuch « Thu Oct 05, 2023 10:27 pm
Replies: 1
by DontKnowMuch » Tue Oct 03, 2023 2:02 pm

First post

I would like to buy a red lens and door for a John Brown 115 taillight. This has a red, round lens like the one below. 1914 Brown Taillight (2).jpg
Please let me know if you have one. Thanks
Dennis

Last post

Still Looking.

1 Replies

505 Views

Last post by DontKnowMuch
Thu Oct 05, 2023 10:27 pm
FS EARLY FORD COIL BOX SWITCH (18-22)

Last post by skyhunter « Thu Oct 05, 2023 10:07 pm
Replies: 3
by Mark Chaffin » Wed Sep 13, 2023 6:45 pm

First post

Very nice early Ford script coil box switch (18-22). Price is $50.00 plus $8.50 domestic shipping. Mark Chaffin (951) 805-0928

sWITCH 1.jpg

Switch 2.jpg

Last post

Does anyone carry just the plain switch plate? The 4730 look too pretty.

3 Replies

717 Views

Last post by skyhunter
Thu Oct 05, 2023 10:07 pm
Hershey Close Out Deals Last Day

Last post by Dan Hatch « Thu Oct 05, 2023 6:29 pm
Replies: 2
by Dan Hatch » Thu Oct 05, 2023 4:49 am

First post

Last day specials
26/27 Wire Wheels $50 each and up
30x3 rims $30 each
NOS 23/25 Sedan Rear Fenders $30 each
Aluminum Hogs heads $50 each
13/14 Rear End Housings $45 each

Spaces CR33/38, Lightpole 68

Get there early or lose out

Last post

Sorry no can do

2 Replies

775 Views

Last post by Dan Hatch
Thu Oct 05, 2023 6:29 pm
WTB 1912 Fore-Door Brackets

Last post by rnwilliams « Thu Oct 05, 2023 11:18 am

by rnwilliams » Thu Oct 05, 2023 11:18 am

I need a pair of the fore-door brackets that fasten the fore-doors to the firewall at the top in a 1912 touring.
Ricky Williams, text or call (731)618-0207, email to rwilliams@humboldtministorage.com or PM

0 Replies

353 Views

Last post by rnwilliams
Thu Oct 05, 2023 11:18 am
REBUILT 1927 Short Block FS

Last post by Gen3AntiqueAuto « Thu Oct 05, 2023 9:50 am
Replies: 9
by Gen3AntiqueAuto » Wed Aug 24, 2022 4:18 pm

First post

I have a rebuilt 1927 T short block here for sale. It has a 290 cam and adjustable lifters. Professionally rebuilt and then re-built again the right way by me after it arrived here in a show car with an oil pan full of coolant and less than 10 minutes of run time.

Not sure how to stick a video in here so here's the link showing the engine that is...

Last post

I still have this here and it needs a new home!

9 Replies

2635 Views

Last post by Gen3AntiqueAuto
Thu Oct 05, 2023 9:50 am
WTB Header plate

Last post by TRDxB2 « Wed Oct 04, 2023 8:49 pm
Replies: 5
by Mark Anderson » Tue Oct 03, 2023 5:20 pm

First post

Is anyone making header plates anymore. Does someone have dimensions for one? Thanks..

Last post

Is anyone making header plates anymore. Does someone have dimensions for one? Thanks..

Chaffin's Garage was making them

5 Replies

958 Views

Last post by TRDxB2
Wed Oct 04, 2023 8:49 pm
FOR SALE Original 26=7 hood

Last post by Bodyman.315 « Wed Oct 04, 2023 8:20 pm
Replies: 1
by Burlingtontguy » Tue Oct 03, 2023 6:26 pm

First post

I have a 26-7 original Model T hood, Faded red paint, no rust out , light sand blast, prime and paint, We all know original T-Stuff lines up the best
$375 O B O plus shipping, e=mail or call me at 401-932-3191, Thanks ,, Dennis

Last post

Hi Dennis this Eric I bought the engine blocks from you.Could you text me some pics of the hood thanks.

1 Replies

475 Views

Last post by Bodyman.315
Wed Oct 04, 2023 8:20 pm
21” wheels and Tires at Hershey on sale Thursday

Last post by Dan Hatch « Wed Oct 04, 2023 6:43 pm
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:22 pm

First post

Got a set of wood and wire wheels with tires at Hershey. Also some wire wheel hubs, front and rear. Spaces CR 33-38
Light pole 68. Thanks

Last post

Wire wheels are going on SALE tomorrow at 9:00.
Be there or be SQUARE

2 Replies

558 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:43 pm
brake light, side lights and other parts.

Last post by TRDxB2 « Wed Oct 04, 2023 12:57 pm
Replies: 10
by skyhunter » Thu Sep 28, 2023 12:18 pm

First post

I am in PA now so nothing to sell. But I did score some stuff I really needed.

Last post

My friend at Hershey says you haven't contacted him to deliver the Tank straps & bases. I emailed you his location. Sending you a PM with that info

10 Replies

1948 Views

Last post by TRDxB2
Wed Oct 04, 2023 12:57 pm
ISO ignition tumbler

Last post by Tim D « Wed Oct 04, 2023 9:49 am
Replies: 4
by Tim D » Tue Oct 03, 2023 4:42 pm

First post

Need a ignition tumbler with a key. repro is fine.
Thanks Tim

Last post

The suppliers are all out and they don't have a date for new ones yet.

4 Replies

823 Views

Last post by Tim D
Wed Oct 04, 2023 9:49 am
New in the box T hoods at Hershey

Last post by Mike Lebsack-Iowa « Wed Oct 04, 2023 8:08 am
Replies: 5
by Mike Lebsack-Iowa » Fri Sep 29, 2023 6:10 pm

First post

I have 5 new Model T hoods still in the original boxes. Save shipping cost. $410 each.
One each, 26/27, 23-25, 17-22, 15-16 aluminum, 13-14 aluminum. Text or call me at 319-fourthirty-49ninetyfive.
First come first serve. I have more but no room to haul. Thanks, Mike

Last post

I have one 23-25 hood and one 15-16 aluminum hood left at Hershey. These are new Rootlieb in original unopened boxes.
They currently list for $425 plus shipping in the catalogs. I am selling these for $410 and no shipping if you pick them up from me. I am on the Green Field space # GBL 26.
You can also text or call me at 319-4thirty- 49ninety...

5 Replies

1342 Views

Last post by Mike Lebsack-Iowa
Wed Oct 04, 2023 8:08 am
13/14/15 Hogs Heads at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:20 am

by Dan Hatch » Wed Oct 04, 2023 6:20 am

Still have a couple nice 13/14/15 Transmission covers.
SpatCr-33/38, Lightpole 68

0 Replies

283 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:20 am
Coilboxs at Hershey FS

Last post by Dan Hatch « Wed Oct 04, 2023 6:15 am
Replies: 1
by Dan Hatch » Mon Oct 02, 2023 6:59 pm

First post

1914 Coilbox with Lid, 1915 Coilbox with Lid.
Spaces CR 33/38 Lightpole 68
Thanks

Last post

Back to the top

1 Replies

386 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:15 am
1914 Steering column at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:15 am
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:55 pm

First post

Pair of 1914 Steering columns at Hershey FS.
Spaces CR 33/38.
Also a 1915 column Lightpole 68
Thanks

Last post

Back to the top

2 Replies

457 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:15 am
1914 WT fenders FS at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:14 am
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:41 pm

First post

Nice pair of 1914 Wide Track front Fenders at Hershey. Spaces
CR 33-38. Lightpole 68 Come by and see. Thanks

Last post

Back to the top

2 Replies

447 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:14 am
1911 Brassworks Radiator at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 6:13 am
Replies: 2
by Dan Hatch » Mon Oct 02, 2023 6:53 pm

First post

Nice 1911/12 Brass Radiator FS at Hershey. Spaces CR-33/38. Thanks

Last post

Back to the top

2 Replies

725 Views

Last post by Dan Hatch
Wed Oct 04, 2023 6:13 am
13/14 Axle Housings at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:58 am

by Dan Hatch » Wed Oct 04, 2023 4:58 am

13/14 rear Axle Housings cheap
CR-33/38, Lightpole 68

0 Replies

216 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:58 am
Small Drum Ruckstell at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:56 am

by Dan Hatch » Wed Oct 04, 2023 4:56 am

Small drum Ruckstell kit
Spaces Cr-33/38. Lightpole 68

0 Replies

389 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:56 am
Canadian Windshield FS at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:53 am
Replies: 1
by Dan Hatch » Mon Oct 02, 2023 5:21 pm

First post

There is a nice 1920-22 Canadian Windshield at Hershey, spaces CR-33/38.
IMG_3165.jpeg

Last post

Leaving Thursday

1 Replies

257 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:53 am
30x3 wheels & rims at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:53 am
Replies: 1
by Dan Hatch » Tue Oct 03, 2023 5:43 am

First post

Got some good 30x3 wheels and rims at Hershey. Price is right.
Spaces CR-33/38. Lightpole 68. Thanks

Last post

Leaving Thursday

1 Replies

330 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:53 am
1911 New GasTank

Last post by Dan Hatch « Wed Oct 04, 2023 4:52 am
Replies: 1
by Dan Hatch » Mon Oct 02, 2023 7:01 pm

First post

1911 New in the box at Hershey
Spaces CR 33/38 Lightpole 68
Thanks

Last post

Leaving Thursday better get this, not being made anymore.

1 Replies

461 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:52 am
14 Windshields at Hershey parting out

Last post by Dan Hatch « Wed Oct 04, 2023 4:51 am

by Dan Hatch » Wed Oct 04, 2023 4:51 am

Parting out 1914 Windshields at Hershey. Got 2 that will be parting .Old Frames, new frames, cross pieces, brass channels, braces.
CR-33/38. Lightpole 68
Leaving Thursday.

0 Replies

230 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:51 am
Roll of top material FS at Hershey

Last post by Dan Hatch « Wed Oct 04, 2023 4:46 am
Replies: 1
by Dan Hatch » Tue Oct 03, 2023 10:47 am

First post

Roll of top material at spaces CR-33/38, Lightpole 68.
Cheap

Last post

Sold Thanks

1 Replies

301 Views

Last post by Dan Hatch
Wed Oct 04, 2023 4:46 am
FS Stewart Model 103 Speedometer

Last post by JBog « Tue Oct 03, 2023 8:54 pm

by JBog » Tue Oct 03, 2023 8:54 pm

This is my eBay listing.

0 Replies

410 Views

Last post by JBog
Tue Oct 03, 2023 8:54 pm
WTB Rear Seat Frame Lid for 1917-1918 Touring Rear Seat

Last post by adam13 « Tue Oct 03, 2023 4:25 pm

by adam13 » Tue Oct 03, 2023 4:25 pm

Wtb one rear seat frame lid for a 17 -18 touring rear seat compartment. This is the panel under the seat cushion that is hinged. This is for a 17-18 touring that is being restored with 100% of its ford sheetmetal.

0 Replies

262 Views

Last post by adam13
Tue Oct 03, 2023 4:25 pm
M<isc parts

Last post by 23ford « Tue Oct 03, 2023 4:04 pm
Replies: 6
by 23ford » Mon Oct 02, 2023 1:37 pm

First post

Misc for sale wite truck pressure gage $50 1925 floorboard risers $30. Fram suction gum $40 Cast iron brake shoes $30 all plus ride pr free pickup tulsa,,,,,,,call nine one 8 6nine 3 five 2 sx 7

Last post

thank you for adding the pictures

6 Replies

913 Views

Last post by 23ford
Tue Oct 03, 2023 4:04 pm
Wanted: Side and tail lights

Last post by Philip Lawrence « Tue Oct 03, 2023 1:02 pm
Replies: 3
by Philip Lawrence » Sun Oct 01, 2023 11:36 pm

First post

I'm looking for a nice set of side lights and also a nice tail light for a 1916. These would have steel rims and have the small vent holes around the base of the chimney. The reflector inside is round unlike the later lights that have a more square shaped reflector.

Last post

Allen, Thank you for your comment. I wish the kerosene lamps here had reflectors made of brass, U.S. production used steel reflectors. It's hard to find them without heavy rust and pitting these days. I think the square type reflectors came along about 1919 in the U.S. The reflectors I believe were zinc plated.

3 Replies

597 Views

Last post by Philip Lawrence
Tue Oct 03, 2023 1:02 pm
15-22 roadster touring windshield frame fs. Sold

Last post by CTLeonard « Tue Oct 03, 2023 9:29 am

by CTLeonard » Tue Oct 03, 2023 9:29 am

A nice straight dent free frame. Missing one glass clamp and the upper glass channel. Folds nicely, no rust issues. Good original, 185.00 plus shipping. Have stanchions if needed ctleonard64@gmail.com 16963396347223013115316245675895.jpg 16963396118782579947064181730653.jpg 169633958332413963949363943119.jpg

0 Replies

304 Views

Last post by CTLeonard
Tue Oct 03, 2023 9:29 am
1923 coil box lid - FOUND.

Last post by Dan Hatch « Tue Oct 03, 2023 5:43 am
Replies: 3
by TheSaintDiscJockey » Mon Oct 02, 2023 9:39 am

First post

Looking to purchase a coil box cover for a 1923 box.
PM or text six zero nine 920 four 2 2 zero.
Many thanks!

Last post

Spaces CR -33/38

3 Replies

608 Views

Last post by Dan Hatch
Tue Oct 03, 2023 5:43 am
For Sale: Offset Spindles

Last post by Bruce Z « Mon Oct 02, 2023 9:11 pm
Replies: 2
by Bruce Z » Mon Oct 02, 2023 1:58 pm

First post

Pair of offset spindles that are Magne fluxed good. New king pin bushings that will have to be fitted to your front end. $300.00 plus $20 shipping Please contact me via email IMG_1006.JPG IMG_1005.JPG IMG_0616.JPG

Last post

sold pending payment

2 Replies

636 Views

Last post by Bruce Z
Mon Oct 02, 2023 9:11 pm
F/S Torpedo firewall bracket

Last post by Bruce Z « Mon Oct 02, 2023 9:10 pm
Replies: 2
by Bruce Z » Mon Oct 02, 2023 2:24 pm

First post

Repro firewall bracket for a torpedo roadster. $10.00 plus $12 shipping. Please contact me via email. IMG_1018.JPG IMG_0616.JPG

Last post

Sold pending payment

2 Replies

483 Views

Last post by Bruce Z
Mon Oct 02, 2023 9:10 pm
Passed date

Last post by mike catlin « Mon Oct 02, 2023 7:10 pm
Replies: 3
by skyhunter » Sun Oct 01, 2023 4:21 pm

First post

Safe travels home all.

This topic can be deleted.

Last post

Sent you a email

3 Replies

841 Views

Last post by mike catlin
Mon Oct 02, 2023 7:10 pm

New Topic

9001 topics

Page 56 of 91
- Jump to page:
Previous
1
…
54
55
56
57
58
…
91
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum