Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 81359 Views
-
Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm
-
-
Big Lot of Mostly 1925-1926 'T' Parts
Replies: 2
by
budsstuff » Mon Oct 30, 2023 2:03 pm
First post
ALL parts SOLD
Last post
I'm looking for both front fenders. Do you have for a 1926-1927 Model T Roadster? How much and location? Might be interested in everything but kinda far away. Let's talk.
- 2 Replies
- 734 Views
-
Last post by Kuffs565
Tue Oct 31, 2023 9:55 am
-
-
F.S. Dash Lamps ( Ford ) ?
Replies: 2
by
Stephen1915 » Mon Oct 30, 2023 10:11 pm
First post
4 dash lamps for one money. The three identical ones appear unused. The one on the far left has a bulb socket in it and a cut wire. Nickle is good on all these, but could use a polish.
Not sure if these are the later Ford made accessory type or not.
$80 shipped.
314-287-1901
Last post
Payment pending
- 2 Replies
- 665 Views
-
Last post by Stephen1915
Tue Oct 31, 2023 12:22 am
-
-
- 1 Replies
- 479 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:51 pm
-
-
Hanky's Saturday/Sunday Blow Out Sale
Replies: 17
by
Henry K. Lee » Sat Oct 21, 2023 2:13 pm
First post
More shelving to clear off..., Here we go! Email me if interested, no PM's!
6 volt starter with seal on the shaft! $180.00 plus shipping.
IMG_1891.jpeg
1926/27 fuel tank with straps, one of the best I have seen. Acid bathed and red coat installed.., $200.00 plus shipping.
IMG_1883.jpeg
IMG_1884.jpeg
IMG_1885.jpeg
IMG_1886.jpeg
Last post
Rim Spreaders and Light still available!
- 17 Replies
- 4238 Views
-
Last post by Henry K. Lee
Mon Oct 30, 2023 6:54 pm
-
-
FS 1915 Chassis
by
25tfire » Mon Oct 30, 2023 5:49 pm
1915 Frame, front and rear leaf springs, over axle wish bone, running boards and brackets, front and rear axles, brake lever, front spring clip, rear spring attach U bolts, radius rods and other misc. chassis parts. Local pick up only. Asking $750. Some pictures to your text or email, Jim 970three7three88six4
- 0 Replies
- 657 Views
-
Last post by 25tfire
Mon Oct 30, 2023 5:49 pm
-
-
FS 1914 Engine and Transmission "SOLD"
by
25tfire » Mon Oct 30, 2023 5:36 pm
1914 complete engine and transmission together, condition unknown, removed from a shed, does turn over but stiff. SN 578415. Asking $550 plus shipping or local pick up. Jim nine7zero37388six4 Pictures to your text or email. SOLD Pending payment.
- 0 Replies
- 492 Views
-
Last post by 25tfire
Mon Oct 30, 2023 5:36 pm
-
-
WTB, Waukesha Ricardo head
Replies: 1
by
Billy Vrana » Thu Oct 26, 2023 9:08 pm
First post
Looking for one for a speedster build, let me know if you have one,
Last post
Last one that I've seen for sale was by Mark Friemiller on EBAY with starting bid of $400.00.
- 1 Replies
- 676 Views
-
Last post by ModelTWoods
Mon Oct 30, 2023 12:05 pm
-
-
WTB Buffalo wire wheel & wheel carrier bracket
Replies: 2
by
havnfun » Sun Oct 22, 2023 8:08 pm
First post
I’m looking for one or more original buffalo wire wheels 23inch 30x3.5, also would like to buy a mounting bracket for spare wheel.
IMG_6037.jpeg
Last post
Still looking for the allusive good buffalo wheel(s)
- 2 Replies
- 718 Views
-
Last post by havnfun
Mon Oct 30, 2023 11:55 am
-
-
NOS FRONT SHACKLE SET *SALE*
Replies: 2
by
Stephen1915 » Sun Oct 29, 2023 1:09 pm
First post
1923-27 Style, but will fit all years. These are New old stock. Not slightly used or mint- NEW. GENUINE FORD quality.
314-287-1901
Last post
Pending Payment
- 2 Replies
- 533 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:29 am
-
-
F.S. NOS 1923-1927 REAR SHACKLE SET * SALE*
Replies: 2
by
Stephen1915 » Sat Oct 28, 2023 10:06 pm
First post
Set of Perfect NOS rear Shackles correct for 1923-1927. They even have their NOS tie bars. Genuine FORD. If you want quality these are for you. +
314-287-1901
Last post
Pending Payment
- 2 Replies
- 503 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:28 am
-
-
- 2 Replies
- 671 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 11:07 am
-
-
Holley G Carburetor Pat’s Dec 22, 1914/sold
Replies: 1
by
Corey Walker » Sun Oct 29, 2023 8:55 pm
First post
Completely disassembled and cleaned, new float, needle and seat, venturi, choke spring, throttle shaft bushing, reconditioned spray needle, test run. $245 postpaid to continental USA email: wlkma9@gmail.com
Last post
Email sent
- 1 Replies
- 553 Views
-
Last post by G.ARMS86
Mon Oct 30, 2023 6:41 am
-
-
Wanted to buy - Ford Special Spindle Arm
Replies: 1
by
Grntea » Thu Oct 26, 2023 9:21 pm
First post
I am looking for a Ford Special Spindle Arm - the one with a hole in it to mount a speedometer drive gear set. Please contact me with a picture and a price! Thanks MTFCA !!!
Last post
Have you found one? I have a set of a L&R I would sell.
Stephen.
314-287-1901
- 1 Replies
- 556 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 12:58 am
-
-
F.S. NOS 5:1 Steering Gears & Pinion *SALE*
Replies: 1
by
Stephen1915 » Sat Oct 28, 2023 6:32 pm
First post
For your 5:1 Steering Cars or to convert to one. These parts are NOS GENUINE FORD. 3 of the 5 gears were together, the other two are stragglers. Pinion is NOS as well.
$40 + Flat Rate Shipping
314-287-1901
Last post
Genuine Ford parts for less than reproduction prices.
- 1 Replies
- 499 Views
-
Last post by Stephen1915
Mon Oct 30, 2023 12:55 am
-
-
Stewart Warner Hand Horn
Replies: 5
by
ThreePedalTapDancer » Sat Oct 28, 2023 6:27 pm
First post
Original Stewart Warner 114 hand horn. Excellent original unrestored condition, gears and internals nice and working smoothly with little to no wear. Original paint with chips and some imperfections and surface rust here and there but no serious pitting or damage. Mounting bracket is a replacement. Perfect for original car. Very loud and crisp...
Last post
Ok address sent to your email
- 5 Replies
- 789 Views
-
Last post by ThreePedalTapDancer
Sun Oct 29, 2023 8:16 pm
-
-
Sold Kingston coil box switch
Replies: 4
by
Bjerm » Mon Oct 16, 2023 7:56 am
First post
Really nice coilbox switch. $200 plus the ride best way to reach me is by email bjerm10@gmail.com
Last post
Check your mail
- 4 Replies
- 872 Views
-
Last post by JTT3
Sun Oct 29, 2023 8:12 pm
-
-
Misc Valve Stem Hardware F/S
by
Jeff Perkins » Sun Oct 29, 2023 6:52 pm
One 777 and one 888 Valve stem plus all the misc. nuts,caps etc. some Dill brand, and a few Model A pieces. $100.00 for all INCUDES shipping in the continental USA. or PM.
- 0 Replies
- 520 Views
-
Last post by Jeff Perkins
Sun Oct 29, 2023 6:52 pm
-
-
For Sale: 1913-1919 Closed Pinion Bearing Spool
Replies: 3
by
Ed Fuller » Mon Oct 16, 2023 9:34 pm
First post
1913-1919 closed pinion bearing spool. Would make a good core for a Timken bearing conversion. The bearing sleeve is unusable and very pitted. Housing has no cracks that I can see.
$30 plus shipping in the U.S.
IMG_2777.jpeg
IMG_2775.jpeg
IMG_2778.jpeg
Last post
Still for sale.
- 3 Replies
- 758 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 5:40 pm
-
-
FS HASSLER BOLTS (NORS)
Replies: 4
by
Mark Chaffin » Thu Oct 12, 2023 4:22 pm
First post
I have several NORS Hassler Bolts that recently came out of an estate sale. I have a very small quantity of both the long bolts (3 5/8 ) and short bolts (3 ). I believe these were produced by Jack Daron. These are currently unavailable. Price is $100 each with free domestic shipping. While supplies last. Mark Chaffin (951) 805-0928
Hassler...
Last post
What do you have left? I am mounting double spring Hasslers to my 1914 Speedster. Thanks, Bill
- 4 Replies
- 868 Views
-
Last post by GOLDBARBILL
Sun Oct 29, 2023 4:56 pm
-
-
- 2 Replies
- 633 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 4:49 pm
-
-
For Sale: 1917-1925 Open Car Door Latch
Replies: 1
by
Ed Fuller » Tue Oct 24, 2023 6:47 pm
First post
For Sale 1917-1925 open car door latch. Operates freely.
$20 plus shipping in the U.S.
IMG_2869.jpeg
IMG_2870.jpeg
Last post
Price drop. $20 plus shipping in the U.S..
- 1 Replies
- 376 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 4:46 pm
-
-
For Sale: 1914-1916 Door Latches
Replies: 1
by
Ed Fuller » Tue Oct 24, 2023 6:44 pm
First post
For Sale, three 1914-1916 door latches. All the same side. The rusty one is seized and the other two move freely.
$50 plus shipping in the U.S.
IMG_2867.jpeg
IMG_2868.jpeg
Last post
Price drop. $50 plus shipping in the U.S. for all 3.
- 1 Replies
- 416 Views
-
Last post by Ed Fuller
Sun Oct 29, 2023 4:45 pm
-
-
SOLD: pair of Clamert headlight lenses 8.25 inches
Replies: 4
by
Walt Wise » Fri Oct 27, 2023 6:20 pm
First post
These were removed from a Model T headlight rim/ring and fit perfectly in them, just FYI. Lenses are in excellent condition - almost perfect, no chips, and have just a hint of purple to them. See the pics below - the lenses are identical in size, it's just my amateur photography skills that make the single shots different sizes. They are perfectly...
Last post
Mr. Glahn,
Sent you and email and a PM as well. Need your shipping info, so reply to one of those two messages please. Not here though, since they aren't safe anymore from AI.
Thanks!!!
Walt Wise
P.S. Thanks MTFCA as well for another successful sale!!!
- 4 Replies
- 860 Views
-
Last post by Walt Wise
Sun Oct 29, 2023 3:55 pm
-
-
W T B 17-22 Low Hood
Replies: 4
by
Burlingtontguy » Fri Sep 29, 2023 6:56 pm
First post
I am looking for a 17-22 Low Hood to build a 1917 Model T ambulance. Found One,,,, Thanks, Dennis
Last post
to the top
- 4 Replies
- 1137 Views
-
Last post by Burlingtontguy
Sun Oct 29, 2023 1:46 pm
-
-
F.S. NOS 1926-1927 Rear Spring Perches
Replies: 1
by
Stephen1915 » Sat Oct 28, 2023 5:13 pm
First post
For the “ Improved Ford” of 1926-1927
These rear perches are Nos originals.
Perfect condition. 90+ years of dirty on these.
$150 + Flat Rate shipping
314-287-1901
Last post
Pending Payment
- 1 Replies
- 373 Views
-
Last post by Stephen1915
Sun Oct 29, 2023 11:44 am
-
-
Running engine for sale May 1922
Replies: 4
by
1915ford » Tue Oct 24, 2023 10:46 am
First post
May 1922 engine for sale. Runs nice i have video of it running on my stand. Still has std iron pistons and original style valves that stand well above the deck. Has starter but no generator. Carb, coils and test stand not included. Pickup in southern minnesota one hour south of mpls. Text me at 507-390-1080 for reply with video. $ 650.00 Thanks....
Last post
Engine sold. Going to Kansas. Thanks.
- 4 Replies
- 1260 Views
-
Last post by 1915ford
Sun Oct 29, 2023 11:06 am
-
-
FS: Splitdorf Model H Magneto…..
Replies: 6
by
George House » Tue Oct 24, 2023 1:09 pm
First post
…. off a 1910 two cylinder Maxwell. Complete. Might’ve been restored by Marks Magneto. Been so long, I can’t remember.Includes spark advance. $750.+ shipping
gwhouse731(at)gmail(dot)com
Last post
My only **Btt* until this ad falls into obscurity 😔
Heck, Merle has the same mag he’d sell for $1 K..
- 6 Replies
- 895 Views
-
Last post by George House
Sun Oct 29, 2023 7:51 am
-
-
FS: Brass Top….
Replies: 2
by
George House » Tue Oct 24, 2023 1:51 pm
First post
….for brass top coil $23 postpaid
gwhouse731(at)gmail(dot)com
Last post
My only **BTT* until this ad falls into obscurity 😔
- 2 Replies
- 707 Views
-
Last post by George House
Sun Oct 29, 2023 7:49 am
-
-
FS: TT Rear Shackles
Replies: 2
by
George House » Tue Oct 24, 2023 1:43 pm
First post
some wear. $30 + USPS small flat rate
gwhouse731(at)gmail(dot)com
Last post
My only **Btt** until this ad falls into obscurity 😔
- 2 Replies
- 445 Views
-
Last post by George House
Sun Oct 29, 2023 7:48 am
-
-
FS Scripted USED Rear Shackles & Tie Bars 1923-27
by
TRDxB2 » Sun Oct 29, 2023 1:55 am
These original used scripted shackles are sold individually with NOS or used scripted tie bars, and used period correct nuts. These all appear to still be usable. Insured USPS shipping is extra PayPal to Family/Friends preferred, checks accepted as well
More items for sale here - save & combine shipping
USED 4 obviously pitted but bolts don't...
- 0 Replies
- 432 Views
-
Last post by TRDxB2
Sun Oct 29, 2023 1:55 am
-
-
- 0 Replies
- 391 Views
-
Last post by TLeroux
Sat Oct 28, 2023 9:45 pm
-
-
For Sale Ruckstell Parts Group SOLD
Replies: 4
by
Bill Mullins » Tue Sep 26, 2023 4:58 pm
First post
Misc. Ruckstell used parts the left differetial housing has a crack.Sold as a group.$150.00 includes shipping.
NEW PRICE
Last post
Bill, put my name in the number 2 spot.
Thanks Kevin
- 4 Replies
- 1116 Views
-
Last post by kevinf
Sat Oct 28, 2023 7:30 pm
-
-
FS: Two 1914 Corcoran Cowl Lamps….
Replies: 1
by
George House » Tue Oct 24, 2023 2:00 pm
First post
…Can’t call them a pair but they’re left and right sides. One has a ‘jewel’ in the rear and the other doesn’t. One has a burner and the other doesn’t. One has a cracked bevel glass and the other doesn’t. Otherwise great condition. $110+the ride… I believe Corcoran was the rarest of the 4 kerosene lamp providers
Last post
Spoken for awaiting payment. Thank you Phill and MTFCA 😎
- 1 Replies
- 489 Views
-
Last post by George House
Sat Oct 28, 2023 6:20 pm
-
-
FS: Complete 1918 Engine & Transmission
Replies: 2
by
George House » Wed Oct 25, 2023 4:24 pm
First post
Looks to be 4 25 18. Motor turns over nicely. This is last year of pre generator. $550. Local pick up only. Need more pictures ? Just ask… gwhouse731(at)gmail(dot)com
Last post
My only **BTT**until this ad falls into obscurity
- 2 Replies
- 588 Views
-
Last post by George House
Sat Oct 28, 2023 6:16 pm
-
-
SOLDNon Ford headlights speedster
Replies: 2
by
Nv Bob » Sat Oct 28, 2023 4:22 pm
First post
Sold thanks Tim and MTFCA
These fit model T forks unknown make in decent shape
Can send more pics
Asking $80 for the pair+ shipping
Last post
Tim replied
If you didn't get it
Try
Jalopyt@yahoo.com
- 2 Replies
- 613 Views
-
Last post by Nv Bob
Sat Oct 28, 2023 6:01 pm
-
-
F.S. NOS ELGIN Front Shackle Set
Replies: 1
by
Stephen1915 » Sat Oct 28, 2023 2:49 pm
First post
Pair of NOS Elgin Front Shackles for Model T Ford. These are very nice quality and give a nice high ring when tapped, leading me to believe they are forged like original Ford Shackles. Cotter pin holes are parallel with each other.
$70 Pair + Flat Rate Shipping
314-287-1901
Last post
Pending Payment.
- 1 Replies
- 414 Views
-
Last post by Stephen1915
Sat Oct 28, 2023 3:45 pm
-
-
Parts for sale
Replies: 3
by
KimDobbins » Sun Oct 22, 2023 8:27 pm
First post
1909-11 original hood board with 2 hood hooks. $75.00. Buttler brand brass water pump rebuilt. $200.00. Front license plate mount pat. 1911. Mounts on the radiator neck.$85.00. 2 neverout rear tail light brackets. $60.00 each. All plus shipping, kdmks AT att.net.
Last post
Email sent on the pump
- 3 Replies
- 1084 Views
-
Last post by 1913Runabout
Sat Oct 28, 2023 2:03 pm
-
-
WTB: Scandinavia Linings Pre 26 ;Brake Lining Failure Fall Tour Put Me on the Vulture Wagon
Replies: 16
by
hailey.harris03 » Mon Oct 23, 2023 7:54 pm
First post
I was recently on the St. Louis Chapter's Fall Tour and after earning the trophy of First Woman to Drive on a Tour I also earned the trophy of Brake Transmission Bands Failing in addition to the nickname EXON for anxiously flooding oil into my '23 touring after trusting the sight glass. -NEVER AGAIN- :lol:
*I am looking for some -PRE 26...
Last post
Hi Hailey,
Sorry I don't have any spare bands for sale & after the Kevlar shortage I picked up any bands I could find. Since this has devolved into a forum
discussion I have a question for those that have more experience than I. Having only installed Scandinavia in uninstalled in a car transmissions
( only tested on the run stand ) All of the...
- 16 Replies
- 2278 Views
-
Last post by Craig Leach
Sat Oct 28, 2023 12:24 pm
-
-
WTB- left rear fender TT express bed
Replies: 3
by
Etudes10 » Tue Sep 19, 2023 6:44 pm
First post
I am looking for a left rear fender for a 1925 express bed.
Will consider buying a pair if necessary.
Thanks, Greg
I added a couple of pictures of the right rear fender that I have. Need the the left. The fenders offered by the vendors look different.
Last post
Still looking for a left rear fender. Bump.
- 3 Replies
- 798 Views
-
Last post by Etudes10
Sat Oct 28, 2023 12:07 pm
-
-
wire wheels and tires and pictures
Replies: 4
by
dinosbunny » Sat Oct 21, 2023 8:28 pm
First post
For Sale, Four wire wheels with hubs, front hubs have NEW inner/outer race (installed), NEW inner and threaded outer bearings, NEW seals, NEW cad lug nuts and 4 brand NEW universal black-wall tires with tubes. Tires and tubes still in wrapper-- Bearings have been greased but never run--
SOLD pending payment, thank you
$1600.00 here are some...
Last post
sorry, wheels are sold pending payment, add moved by mistake
- 4 Replies
- 1384 Views
-
Last post by dinosbunny
Sat Oct 28, 2023 11:38 am
-
-
Victor model 2 headlight bucket fs
Replies: 4
by
CTLeonard » Tue May 24, 2022 12:12 pm
First post
A very good bucket for sale. Is missing one of the pins for the reflector. 30.00 plus shipping IMG_20220524_110607817.jpg IMG_20220524_110549004.jpg IMG_20220524_110536918.jpg IMG_20220524_110523360.jpg
Last post
30.00 plus shipping for this really good victor bucket. ctleonard64@gmail.com
- 4 Replies
- 1407 Views
-
Last post by CTLeonard
Sat Oct 28, 2023 11:10 am
-
-
(Found)WTB - two 30x3 round-fellow wheels
Replies: 1
by
bpresslylsmo » Fri Oct 27, 2023 5:23 pm
First post
Looking for a set of front wheels for a 1911 Touring. 2- 30x3 wooden round fellow wheel in good shape. Thanks
email bpresslyLSMO(at)aol(dot)com
Last post
Email sent. ctleonard64@gmail.com
- 1 Replies
- 436 Views
-
Last post by CTLeonard
Sat Oct 28, 2023 8:11 am
-
-
‘24-‘25 parts
Replies: 2
by
G.ARMS86 » Mon Oct 23, 2023 8:04 am
First post
1924-1925 sheet metal parts asking $75 or best offer plus shipping
Last post
To the top
- 2 Replies
- 718 Views
-
Last post by G.ARMS86
Sat Oct 28, 2023 7:14 am
-
-
Crane/Hoist DYRR Mfg Co. $250.00 Sold!
Replies: 2
by
Etudes10 » Fri Oct 27, 2023 7:00 pm
First post
DYRR Mfg Co crane or hoist. Bolts to the bed of any truck or use as a static display. This thing is heavy so shipping is most likely out of the question.
Asking $250.00 or trade?
Nine-0-nine nine-0-8 3876
Last post
Crane is sold. Thanks mtfca!
- 2 Replies
- 858 Views
-
Last post by Etudes10
Sat Oct 28, 2023 12:36 am
-
-
- 0 Replies
- 453 Views
-
Last post by 25tfire
Fri Oct 27, 2023 9:19 pm
-
-
Early parts for sale
Replies: 6
by
1915ford » Sun Oct 22, 2023 9:46 am
First post
1909-13 frame, blasted, primed and ready to use $750.00. 11-12 clamshell housings in excellent condition $2200.00. 1909-10 six rivet housings, painted and ready to use $1800.00. 2 pce driveshaft housing complete and painted $650.00. 1909-14 radius arms, painted and ready to go $200.00. 1911-12 kingston box with coils, unrestored good condition...
Last post
Kingston carb and coil box are sold.
- 6 Replies
- 1684 Views
-
Last post by 1915ford
Fri Oct 27, 2023 6:53 pm
-
-
FS: Complete 1919 Engine & Transmission
Replies: 5
by
George House » Wed Oct 25, 2023 4:16 pm
First post
Complete and dismantled. Engine free. Looks to be 11 7 19
Includes fan assy, generator, starter & bendix assy, coolant inlet & outlets, all nuts/bolts fasteners and transmission cover. Local pickup only. $450. Need more pictures ? Just ask….
gwhouse731(at)gmail(dot)com
Last post
‘19 motor spoken for pending payment and more pictures from me to Perry. Thank you MTFCA
- 5 Replies
- 1313 Views
-
Last post by George House
Fri Oct 27, 2023 6:36 pm
-
-
FS: Three Early Spindle Arms…
Replies: 2
by
George House » Tue Oct 24, 2023 1:13 pm
First post
…Swap meet inventory ? Only $75+ the ride
gwhouse731(at)gmail(dot)com
Last post
Thanks Bob and MTFCA. One sold - two left
- 2 Replies
- 517 Views
-
Last post by George House
Fri Oct 27, 2023 6:34 pm
-
-
FS: TT C Cab Door Hinges
Replies: 3
by
George House » Tue Oct 24, 2023 1:38 pm
First post
…$45 for the 3 or $15 each + the ride
gwhouse731(at) gmail(dot)com
Last post
Spoken for. Thanks Charlie and MTFCA
- 3 Replies
- 629 Views
-
Last post by George House
Fri Oct 27, 2023 6:31 pm
-
-
Tubes fs. 30x3 1/2 metal stem. Sold
Replies: 1
by
CTLeonard » Fri Oct 27, 2023 3:46 pm
First post
Four new metal stem tubes fs. 30x3 1/2. 200.00 plus shipping. ctleonard64@gmail.com IMG_20231027_144247576.jpg IMG_20231027_144307290.jpg
Last post
Email sent
Scott
- 1 Replies
- 305 Views
-
Last post by South park zephyr
Fri Oct 27, 2023 5:20 pm
-
-
WTB parts with patina
Replies: 2
by
Allan » Fri Oct 27, 2023 12:37 am
First post
I need the following unrestored parts for a barn fresh tourer.
A coilbox lid of similar appearance to this one 20231019_094202.jpg
An H headlight lens. New ones out of stock.
A headlight rim that was once nickel plated like this one. 20231019_094202.jpg
One or two original number 53 ignition keys.
I have a volunteer in Texas who will accept...
Last post
eBay item number:196051334762
Coil box lid,Bob
- 2 Replies
- 793 Views
-
Last post by FATMAN
Fri Oct 27, 2023 4:05 pm
-
-
F-S Nice pair if 1917-25 running board aprons.
Replies: 4
by
FATMAN » Wed Oct 25, 2023 10:32 am
First post
F-S Nice pair if 1917-25 running board splash aprons touring & roadster.
nice original set local pick up here at the shop in Loves PARK, Il
75.00
Bob
815-633-7244
modelt2001@comcast.net
Last post
try again on new photos
- 4 Replies
- 1056 Views
-
Last post by FATMAN
Fri Oct 27, 2023 11:30 am
-
-
Best Price touring body
Replies: 2
by
dinosbunny » Thu Oct 19, 2023 5:30 pm
First post
For Sale, Late 23-25 touring body, all new wood, no cancer in the sheet metal, comes with a hood and all the floor boards, ready to bolt on your chassis, last best price before I repaint it next year and yes, the price will be much more. $2500.00
Last post
to the top again
- 2 Replies
- 1170 Views
-
Last post by dinosbunny
Fri Oct 27, 2023 10:14 am
-
-
Round fellow wheel fs
by
CTLeonard » Fri Oct 27, 2023 9:39 am
You are basically buying the rim.theres a few good spokes, and the hub.. The inner edges of the rim are in good shape. 70.00 plus shipping. ctleonard64@gmail.com IMG_20231027_083146326.jpg IMG_20231027_083210163.jpg IMG_20231027_083138962.jpg IMG_20231027_083246987.jpg IMG_20231027_083252186.jpg
- 0 Replies
- 382 Views
-
Last post by CTLeonard
Fri Oct 27, 2023 9:39 am
-
-
- 0 Replies
- 451 Views
-
Last post by Nv Bob
Thu Oct 26, 2023 10:50 pm
-
-
Payment for parts
Replies: 23
by
Dennis_Brown » Fri Jan 20, 2023 10:22 pm
First post
When you sold items on classified parts, how did you get paid?
Last post
Beware of PayPal..! I had an account for over 15 years with no issues at all.
A couple months ago I got scammed outta $300 on another site so I went through the steps to stop payment which was very frustrating to navigate. But I got the payment stopped after a couple of hours trying to go through all the steps, so, I felt relieved that PayPal...
- 23 Replies
- 6418 Views
-
Last post by Runabout
Thu Oct 26, 2023 10:05 pm
-
-
Wanted to Buy: Weaver wrecker set up
by
Mike Lebsack-Iowa » Thu Oct 26, 2023 10:02 pm
Title says it all. Finishing up a nice TT steel C cab restoration and would like to wrap it up right with a good Weaver set up. I’ve been offered a few over the years but simply never thought I would have a use for one. Oh well, times change .🤪
- 0 Replies
- 499 Views
-
Last post by Mike Lebsack-Iowa
Thu Oct 26, 2023 10:02 pm
-
-
WTB:1927 brake lever escutcheon with tsbs
Replies: 1
by
Brent Mize » Thu Oct 26, 2023 5:55 pm
First post
Looking for a 1927 brake lever escutcheon trim plate with tabs instead of mounting holes.
Looking for a decent piece that will restore well for a show car.
Thanks Brent
Last post
Looking for a 1927 brake lever escutcheon trim plate with tabs instead of mounting holes.
Looking for a decent piece that will restore well for a show car.
Thanks Brent
- 1 Replies
- 507 Views
-
Last post by Brent Mize
Thu Oct 26, 2023 5:56 pm
-
-
For Sale Stevens T-120 Gear Puller
Replies: 2
by
Humblej » Thu Oct 26, 2023 4:23 pm
First post
For Sale: Stevens T-120 Duplex gear puller for driveshaft pinion gear and transmission drive gear. Puller is in nice shape, clean, and with original paint. A prior owner ground the end to a sharper angle for better clearance to get under a gear so it is not perfect, but fully functional, perhaps even functions better this way. $75 plus actual...
Last post
Sorry Bill, first to PM me is Robbie. Sold pending payment. Bill is backup if Robbie falls thru.
- 2 Replies
- 569 Views
-
Last post by Humblej
Thu Oct 26, 2023 5:07 pm
-
-
For sale low drum
by
Tim D » Thu Oct 26, 2023 11:58 am
Very nice low drum no visible cracks.teeth have no wear on them.
$100 plus shipping in the USA.
- 0 Replies
- 403 Views
-
Last post by Tim D
Thu Oct 26, 2023 11:58 am
-
-
For sale trans brake hub
by
Tim D » Thu Oct 26, 2023 11:47 am
Brake hub shaft for sale looks good drum is cracked. Can remove some of it before shipping in the USA. May need new inside bushing.
$50 plus shipping.
- 0 Replies
- 377 Views
-
Last post by Tim D
Thu Oct 26, 2023 11:47 am
-
-
Low head fs. sold
Replies: 4
by
CTLeonard » Tue Aug 01, 2023 10:10 am
First post
200.00 plus shipping. ctleonard64@gmail.com 16908989002468974526677095732084.jpg 16908989232578780233167031993004.jpg 16908989667184787579650818038158.jpg
Last post
Xxxxxxxxxxxx
- 4 Replies
- 1140 Views
-
Last post by CTLeonard
Thu Oct 26, 2023 11:44 am
-
-
14 steering column fs. Sold
Replies: 1
by
CTLeonard » Thu Oct 12, 2023 10:17 am
First post
At least I believe it's 14. Has the dodge bros. Below quadrant. 180.00 plus shipping. ctleonard64@gmail.com 16971201583254417126918515154303.jpg 16971201785521618357837759178951.jpg 16971201999191248204179490086059.jpg 16971202198527946112809610490912.jpg
Last post
Xxxxxxxxxxxx
- 1 Replies
- 438 Views
-
Last post by CTLeonard
Thu Oct 26, 2023 11:43 am
-
-
- 0 Replies
- 393 Views
-
Last post by Tim D
Thu Oct 26, 2023 11:42 am
-
-
- 0 Replies
- 408 Views
-
Last post by Tim D
Thu Oct 26, 2023 11:23 am
-
-
30x3 1/2 tire carrier fs. Sold
by
CTLeonard » Thu Oct 26, 2023 10:50 am
As stated, 30x31/2 tire carrier fs. 85.00 plus shipping. Please don't ask me what shipping is. I'm not the post office. Shipping is what it is, ctleonard64@gmail.com IMG_20231026_093802196.jpg IMG_20231026_093818508.jpg
- 0 Replies
- 343 Views
-
Last post by CTLeonard
Thu Oct 26, 2023 10:50 am
-
-
30x3 1/2 tires for sale. Sold
Replies: 3
by
CTLeonard » Wed Oct 25, 2023 3:50 pm
First post
I have two 30x3 1/2 tires fs. There's no name but made in Australia. These have excellent tread left on them, and still very plyable. 90.00 for both plus shipping IMG_20231025_144522084.jpg IMG_20231025_144555493.jpg IMG_20231025_144549559.jpg
Last post
email sent
- 3 Replies
- 716 Views
-
Last post by KMorford
Thu Oct 26, 2023 9:56 am
-
-
Three Model T Hub Pullers
Replies: 1
by
Jeff Perkins » Tue Oct 24, 2023 9:23 pm
First post
Two for passenger chassis, one for TT truck. Choice $40.00 each plus postage. or PM
Last post
The middle one is sold. Thank You Mike!
- 1 Replies
- 737 Views
-
Last post by Jeff Perkins
Thu Oct 26, 2023 7:55 am
-
-
WTB: 1917 Towncar literature
Replies: 11
by
jaybee47 » Fri Oct 13, 2023 9:53 am
First post
Seeking any literature copies regarding the '17 Towncar, articles, pictures, etc. Also asking what library can be contacted to obtain copies. The McCalley book does not include what I seek. Thank you for any leads.
Last post
Here is another photo,
this one was taken in Russia
- 11 Replies
- 1785 Views
-
Last post by Luxford
Thu Oct 26, 2023 1:35 am
-
-
WTB 1925 Pick-Up Bed
Replies: 5
by
Stephen1915 » Thu Oct 12, 2023 11:36 pm
First post
Looking for a 1925 Pickup Bed.
Complete or Parts.
Call or text
314-287-1901
stephensmail2001@gmail.com
Last post
I know where you might get a whole 25 roadster pick-up that needs rod bearing work that is know of for sure.
Where is it located and how much?
- 5 Replies
- 963 Views
-
Last post by Kuffs565
Thu Oct 26, 2023 12:08 am
-
-
FOR SALE Chassis's with or without engines
Replies: 1
by
Burlingtontguy » Sun Dec 18, 2022 10:12 pm
First post
I have Model T chassis's for sale with or without engines. Pick your steering columns, springs,rear axle, front axle, ETC... Give me a call or send an e-mail.. Thanks, Dennis 401-932-3191
Last post
to the top
- 1 Replies
- 1165 Views
-
Last post by Burlingtontguy
Wed Oct 25, 2023 10:27 pm
-
-
E&J 656 headlights fs. Sold
Replies: 2
by
CTLeonard » Wed Oct 18, 2023 12:17 pm
First post
Fonts have a couple minor dings, doors have been replaced with dent free ones. One has a cracked reflector, the other is good. Both have glass and burners even the elbows. One bucket has small hole in the back. 475.00 plus shipping. ctleonard64@gmail.com 16976456504983367011359881661296.jpg 16976456689602197671833050068978.jpg...
Last post
E-mail sent
- 2 Replies
- 750 Views
-
Last post by bryan831daniel
Wed Oct 25, 2023 9:02 pm
-
-
F/S Several original T&TT Hubcaps
Replies: 4
by
Jeff Perkins » Tue Oct 24, 2023 9:40 pm
First post
Not beat up….pretty nice originals. $15.00 each plus postage. Also one 1911-12 hubcap, same condition. $30.00 plus postage. Two TT hubcaps, same condition, $10.00 each. or PM
Last post
Early hubcap, as well as the high F hubcap are both sold. The TT hubcaps are also sold. Thank you MTFCA!
- 4 Replies
- 943 Views
-
Last post by Jeff Perkins
Wed Oct 25, 2023 5:47 pm
-
-
DB marked spindle….SOLD
Replies: 2
by
Jeff Perkins » Tue Oct 24, 2023 9:15 pm
First post
$75.00 plus postage. or PM
Last post
Send me an email with your address and zip so I can get postage. Thank you! Jeff P.
- 2 Replies
- 748 Views
-
Last post by Jeff Perkins
Wed Oct 25, 2023 5:42 pm
-
-
Pan replacement ears for sale 2 pairs
by
elliott1936 » Wed Oct 25, 2023 4:16 pm
For sale are two (2) pair of pan replacement ears. 10.00 per set with cost of postage. They should mail for about $10.00 or less.
Tom Elliott five03-644-937four twoelliott@msn.com
- 0 Replies
- 414 Views
-
Last post by elliott1936
Wed Oct 25, 2023 4:16 pm
-
-
FS: Spare Tire Carrier…
Replies: 2
by
George House » Tue Oct 24, 2023 1:47 pm
First post
…. I think this is probably Model A. $5 should cover my boxing and taking into town + the ride.
gwhouse731(at)gmail(dot)com
Last post
Here’s another view of this 5 dollar item
- 2 Replies
- 694 Views
-
Last post by George House
Wed Oct 25, 2023 4:00 pm
-
-
Two 30x3" wheels & tires for sale
by
Fozz71 » Wed Oct 25, 2023 3:54 pm
Here are two 1917+ 30x3 wooden wheels with square felloes for sale. Good tires and one holds air yet. The wood wheel on one is good and the other is very loose with loose spokes. So you get two good tires, a tube and a good wheel and the other would be for display or to rebuild. Asking $70 for both located in Oswego, IL 60543, please come and get...
- 0 Replies
- 543 Views
-
Last post by Fozz71
Wed Oct 25, 2023 3:54 pm
-
-
Wanted - One 30x3.5 Hayes Metal Felloe - Found!
Replies: 7
by
CudaMan » Mon Oct 23, 2023 5:57 pm
First post
I was able to get three felloes from Melba Nolan (thanks, Melba!), but I need a fourth so that I can build up a spare set of 30x3.5 wheels for my 1924. I already have the hubs and spokes, I just need one felloe.
The three felloes that I already have have four dents in the rim to allow clearance for the lug feet , as shown in the attached pic.
Last post
I have seen some on this forum with notches, but the ones I have seen in person have had the dents . There is some discussion on this further up in this thread. :)
- 7 Replies
- 1023 Views
-
Last post by CudaMan
Tue Oct 24, 2023 9:31 pm
-
-
For Sale: Flip Top Radiator Cap
Replies: 3
by
Ed Fuller » Sat Oct 14, 2023 12:09 pm
First post
Flip top brass radiator cap. Looks like it was nickel plated at one time. Needs some cleaning up, has some stress cracks on the sides.
$40 plus shipping in the U.S.
IMG_2722.jpeg
IMG_2724.jpeg
IMG_2725.jpeg
IMG_2726.jpeg
Last post
Cap is sold.
- 3 Replies
- 841 Views
-
Last post by Ed Fuller
Tue Oct 24, 2023 6:40 pm
-
-
Stainless Ford Valves FS MORE STUFF
Replies: 8
by
Dan Hatch » Sun Oct 15, 2023 8:49 am
First post
Here is a set of 10 standard .312 stem valves. These are going for $11 each from vendors. I will take $80 + shipping for all of this. These are extra to me.
Adding 2 more valves for total of 10. 4 New Std push rods AKA Lifters, 5 New cups, 8 used valve springs and 4 used valves. All for same price. See pictures
Email me at address in pictures....
Last post
Dan, I sent another email. If.you don't receive it would you please call me at 503-728-3476 Thanks Ted
- 8 Replies
- 1332 Views
-
Last post by T Cruiser
Tue Oct 24, 2023 2:59 pm
-
-
WTB: Neverout rear license plate bracket as shown
Replies: 5
by
MTPhono » Mon Oct 23, 2023 10:44 pm
First post
Looking to buy a Neverout rear license plate bracket. I need the blade connector, not the round style.
Let me know what you have. Thanks - Scott
Last post
The lights on my '13 will accept either style (tapered or flat). They pop up on EBay once in a while. That's where I got mine.
- 5 Replies
- 1072 Views
-
Last post by A400
Tue Oct 24, 2023 9:07 am
-
-
Leather fender frames
by
Wayne Mims » Mon Oct 23, 2023 8:40 pm
For sale horseless carriage leather fender frames un known origin $50 + shipping. please respond on classifieds. IMG_0263.jpeg
- 0 Replies
- 569 Views
-
Last post by Wayne Mims
Mon Oct 23, 2023 8:40 pm
-
-
For Sale: 1913 Touring door latches
Replies: 2
by
Ed Fuller » Sat Oct 21, 2023 4:00 pm
First post
Set of door latches for 1913 Touring. They are rusty and seized and need to be freed up.
$150 plus shipping in the U.S. for all.
IMG_2841.jpeg
IMG_2842.jpeg
Last post
Latches are sold.
- 2 Replies
- 773 Views
-
Last post by Ed Fuller
Mon Oct 23, 2023 6:22 pm
-
-
- 0 Replies
- 319 Views
-
Last post by Belliott3
Mon Oct 23, 2023 12:27 pm
-
-
WANTED: 23-25 Radiator Apron
Replies: 4
by
Stephen1915 » Sun Oct 15, 2023 10:39 pm
First post
Looking for a VERY NICE mint or Nos, ORIGINAL radiator Apron for 1923-25 Cars.
Call, Text, or email
314-287-1901
stephensmail2001@gmail.com
Last post
I have these for sale call or text 2036873827
- 4 Replies
- 729 Views
-
Last post by G.ARMS86
Mon Oct 23, 2023 8:24 am
-
-
Wanted: One good narrow band w/detachable ears
Replies: 3
by
Mark Osterman » Sat Oct 21, 2023 3:15 pm
First post
As the heading says, I’m looking for just one good greasy narrow band with the button type Ford detachable ears.
Mark Osterman
mosterman@icloud.com
Last post
Well … I tried messaging you. How about you email me? 😄
Markosterman@icloud.com
- 3 Replies
- 1033 Views
-
Last post by Mark Osterman
Mon Oct 23, 2023 7:10 am
-
-
1911-12 Oil Pan-SOLD
Replies: 1
by
ModelTRoadster » Sun Oct 22, 2023 4:38 pm
First post
1911-1912 Oil Pan $700
Some minor pitting but fairly good condition.
Serious inquiries only, no solicitations.
Call Tom at 585-738-1988.
Last post
I will take it. Message left on your phone and text sent.
- 1 Replies
- 666 Views
-
Last post by rnwilliams
Sun Oct 22, 2023 8:27 pm
-
-
Hand Sparton Horn (SOLD)
by
ThreePedalTapDancer » Sun Oct 22, 2023 7:26 pm
Original “Hand Sparton” accessory horn. It works by pushing the ball lever forward instead of pushing, emitting a very loud “AWOOOOH!” sound. It is in excellent mechanical condition. Loud crisp noise and smooth action. Nice black paint with polished bell. Bell has a few tiny imperfections but looks wonderful overall. Neat smaller bell size. 6.5...
- 0 Replies
- 370 Views
-
Last post by ThreePedalTapDancer
Sun Oct 22, 2023 7:26 pm
-
-
Brass Steering Wheel (SOLD)
Replies: 2
by
ThreePedalTapDancer » Sat Oct 21, 2023 2:14 pm
First post
Very nice 15 inch diameter brass steering wheel. Wood rim is solid with a nice cherry stain. Brass is heavy with a nice polish, no damage. Hard to find, no longer being made. Ready to mount and use. 425 includes shipping US.
IMG_9156.jpeg
Last post
E-Mail sent.
- 2 Replies
- 742 Views
-
Last post by Bill Everett
Sun Oct 22, 2023 5:53 pm
-
-
WTB Parts for Castle Gas Headlights
Replies: 2
by
JSteele » Tue Oct 17, 2023 12:51 pm
First post
I need most of the inside parts, burner assembly, reflectors, lenses and one good chimney for a pair Model 1106 Castle Lamp.
:?: I'm not positive but am guessing most of the internal parts may be interchangeable with other model Castle & Castle Atwood lamps. Maybe someone who knows can comment on that.
If you know off a vendor or other...
Last post
Hi Kim,
I need reflectors and complete burner assemblies for sure. I'm not sure what holds the reflators in place. I do have brass trim that that must go around the reflectors, maybe just behind them. this afternoon I will go out and and take a few measurements and pictures.
thank you,
John
- 2 Replies
- 679 Views
-
Last post by JSteele
Sun Oct 22, 2023 9:23 am
-
-
For Sale: Lot of Model T Times magazines MTFCI 2001 - 2010
Replies: 6
by
VinTin23 » Thu May 18, 2023 10:14 am
First post
Model T Times Magazines
For Sale: A lot of Model T Times magazines from the Model T Ford Club International. All magazines are in Good-Excellent Condition from non-smokers home. A good number of them have the yellow protective cover.
It’s just fascinating to see this snapshot in time of how the hobby has progressed.
These are priced to sell,...
Last post
Charlie, Payment received, will be in the mail Monday. Thank you.
- 6 Replies
- 1593 Views
-
Last post by VinTin23
Sat Oct 21, 2023 6:12 pm
-
-
For Sale: Early Champion X Smooth Insulator Spark Plugs
Replies: 2
by
Ed Fuller » Sat Oct 21, 2023 11:10 am
First post
4 barn fresh, used early Champion X spark plugs with smooth insulators. 3 of them do NOT have “Pat Office” markings which I believe makes them pre-1915. The other one has the “Pat Office” markings.
$100 plus $10 shipping in the U.S.
IMG_2805.jpeg
IMG_2807.jpeg
IMG_2808.jpeg
IMG_2809.jpeg
Last post
Plugs are sold!
- 2 Replies
- 638 Views
-
Last post by Ed Fuller
Sat Oct 21, 2023 2:41 pm
-
-
For Sale: Rajo Accessory Oil Level Gauge
Replies: 2
by
Ed Fuller » Sat Oct 14, 2023 11:57 am
First post
New, well made reproduction Rajo oil level gauge made by the talented Tim Morsher. If you’re not familiar with the parts he make, they are of outstanding quality.
The fitting installs in place of your lower oil petcock and the top part of the gauge goes through one of the pan bolt holes.
I am not sure if he is making these any longer.
$150...
Last post
Oil level gauge is sold.
- 2 Replies
- 829 Views
-
Last post by Ed Fuller
Sat Oct 21, 2023 10:46 am
-
-
WTB top of window seal
Replies: 3
by
Tinner12 » Wed Oct 18, 2023 5:31 pm
First post
I need a top of the window seal trim piece. I have a 1926 fordoor that I need it for. The part is the same for top of all doors and rear windows. Maybe other years of coupes and sedans may be the same????
Last post
found my part, Thanks to Joe
- 3 Replies
- 682 Views
-
Last post by Tinner12
Sat Oct 21, 2023 8:15 am
-
-
wire wheels and tires
Replies: 1
by
dinosbunny » Fri Oct 20, 2023 11:03 pm
First post
For Sale, Four wire wheels with hubs, front hubs have NEW inner/outer race (installed), NEW inner and threaded outer bearings, NEW seals, NEW cad lug nuts and 4 brand NEW universal black-wall tires with tubes. Tires and tubes still in wrapper--
$1600.00
Last post
Email sent
- 1 Replies
- 787 Views
-
Last post by Grntea
Fri Oct 20, 2023 11:59 pm
-
-
RUCKSTELL BOOK, HALF PRICE
Replies: 28
by
Chaffins » Tue Mar 21, 2023 4:53 pm
First post
GLOVER E. RUCKSTELL AND THE RUCKSTELL AXLE RETAIL PRICE $34.95 GET YOUR COPY WHILE THE SUPPLY LASTS FOR HALF PRICE $22.50 POSTAGE PAID, FOREIGN SHIPPING AT COST
951-735-4791 1939 S. MAIN ST. CORONA, CAL 92882
RUCKSTELL BOOK.docx BOOK_ADS.pdf
Last post
Is this deal still available?
- 28 Replies
- 6560 Views
-
Last post by Jim11787
Fri Oct 20, 2023 10:57 pm
-
-
SOLD: Early 1900-1909 Steering Column/Tiller Brass Horn
Replies: 1
by
GGZ » Fri Oct 20, 2023 3:31 pm
First post
SOLD!!!
Here is an original, all brass horn that would fit onto a steering column or tiller that would date from 1900 to about 1909. This horn measures about 5 3/4 in the diameter and is about 7 by 9 in overall measurements. It is in excellent condition and has the 2-piece mounting bracket and a reed. A great, early horn.Take a look at the photos...
Last post
More photos.......
- 1 Replies
- 610 Views
-
Last post by GGZ
Fri Oct 20, 2023 5:05 pm
-
-
- 6 Replies
- 2094 Views
-
Last post by Bill Anziani
Fri Oct 20, 2023 4:47 pm
-
-
- 0 Replies
- 395 Views
-
Last post by joshboogie
Fri Oct 20, 2023 2:55 pm
-
-
FS REAR AXLE BEARINGS (SOLD)
Replies: 1
by
Mark Chaffin » Fri Oct 20, 2023 12:30 pm
First post
Not the best and not the worst. Four rear axle bearings. Some minor pitting. Rollers measure .491 to .494. Price is $10.00 each plus $8.50 domestic shipping. Mark Chaffin (951)805-0928 SOLD
20231020_092341.jpg
20231020_092424.jpg
Last post
Sold to Rich. Thank you.
- 1 Replies
- 418 Views
-
Last post by Mark Chaffin
Fri Oct 20, 2023 12:50 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum