Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 78138 Views
-
Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm
-
-
FS 26/27 SPINDLE SET
Replies: 2
by
Mark Chaffin » Tue Apr 25, 2023 6:00 pm
First post
One set of very nice 26/27 spindles with speedometer drive gear mount. Threads and bearing races are in excellent condition. Price for the pair is $100.00 plus $17.10 Domestic USPO Priority shipping. Mark Chaffin (951) 805-0928
Spindle Set 1.jpg
Spindle Set 2.jpg
Last post
Pending to Aaron.
- 2 Replies
- 878 Views
-
Last post by Mark Chaffin
Wed Apr 26, 2023 9:25 am
-
-
13-14 cherry plywood firewall fs. Sold
Replies: 1
by
CTLeonard » Mon Apr 24, 2023 3:59 pm
First post
Purchased in 2020. 13-14 firewall. 21 1/2 tall 32 1/4 wide. Firewall banding included. One little ding on bottom. 195.00 plus shipping. This has never been installed. These are still on backorder, like everything else. ctleonard64@gmail.com IMG_20230424_144736930.jpg IMG_20230424_144605927.jpg IMG_20230424_144617960.jpg
Last post
Price drop of 175.00 plus shipping
- 1 Replies
- 665 Views
-
Last post by CTLeonard
Wed Apr 26, 2023 9:05 am
-
-
Early 1926 Fan Bracket Wster Outlet FS
Replies: 5
by
Dan Hatch » Sun Apr 23, 2023 4:11 pm
First post
Here is a nice Early 1926 Fan Bracket Water Outlet. This is a very nice one, not broken or rusted bad. If you have an early 26 you know how hard good ones are to find. They are either broken cause someone did not know how to adjust them. Or they are rusted so bad. The pulley on this is not much good, you are buying the not broken housing not the...
Last post
Thank you, Frank!
- 5 Replies
- 1046 Views
-
Last post by Shannon_in_Texas
Tue Apr 25, 2023 7:59 pm
-
-
- 0 Replies
- 534 Views
-
Last post by Tim D
Tue Apr 25, 2023 6:45 pm
-
-
1915 Horn (SOLD)
Replies: 6
by
ThreePedalTapDancer » Mon Feb 27, 2023 4:33 pm
First post
1915 horn. Nice solid condition, has new brass screen and cover. Appears dent free, has a few tiny dings here and there. 150.00 includes shipping lower 48.
F5DB5DBE-B07F-40C4-AAAF-B34B9511B956.jpeg 4292B1DF-D5D9-4504-B536-8FCE69FD65B4.jpeg
Last post
This is a correct 1915 horn…still available
- 6 Replies
- 1824 Views
-
Last post by ThreePedalTapDancer
Tue Apr 25, 2023 4:43 pm
-
-
Old grease guns fs. Sold
by
CTLeonard » Tue Apr 25, 2023 3:13 pm
Alemite lubricator pat. 1919.the big one still pushes old grease. Has braided lines on them. Use them or hang em on the wall. 20.00 for the small one, 25.00 for the bigger, plus shipping. ctleonard64@gmail.com IMG_20230425_140732888.jpg IMG_20230425_140720741.jpg
- 0 Replies
- 657 Views
-
Last post by CTLeonard
Tue Apr 25, 2023 3:13 pm
-
-
- 0 Replies
- 593 Views
-
Last post by John iaccino
Tue Apr 25, 2023 2:56 pm
-
-
More jnobrown 110 sidelights fs
by
CTLeonard » Tue Apr 25, 2023 2:36 pm
Chimneys are trash, but these have fonts and burners. glass is good. 150.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20230425_132952086.jpg IMG_20230425_132923274.jpg IMG_20230425_132932245.jpg
- 0 Replies
- 588 Views
-
Last post by CTLeonard
Tue Apr 25, 2023 2:36 pm
-
-
Jno brown 110 sidelights fs
by
CTLeonard » Tue Apr 25, 2023 2:25 pm
No fonts no burners. Good glass , reflectors and jewels. One mint brass chimney. 100.00 for the pair plus shipping. ctleonard64@gmail.com IMG_20230425_131946053.jpg IMG_20230425_132004068.jpg IMG_20230425_131933314.jpg
- 0 Replies
- 568 Views
-
Last post by CTLeonard
Tue Apr 25, 2023 2:25 pm
-
-
- 2 Replies
- 613 Views
-
Last post by John iaccino
Tue Apr 25, 2023 2:13 pm
-
-
Kingston L-4 brass carb fs
by
CTLeonard » Tue Apr 25, 2023 2:04 pm
Looks to be complete ready for rebuild.45.00 plus shipping. ctleonard64@gmail.com IMG_20230425_130206217.jpg IMG_20230425_130130835.jpg IMG_20230425_130218449.jpg
- 0 Replies
- 467 Views
-
Last post by CTLeonard
Tue Apr 25, 2023 2:04 pm
-
-
Pair of e&j 32 sidelamps fs. Sold
by
CTLeonard » Tue Apr 25, 2023 1:58 pm
Let's not get real excited. Tops are dented.one font has been filled with something. One square glass is cracked.one door hinge is broken. both have good reflectors. I'd like to ask 100.00 for the pair, plus shipping. Will take a reasonable offer though. Both have burners ctleonard64@gmail.com IMG_20230425_124720364.jpg IMG_20230425_124644982.jpg...
- 0 Replies
- 521 Views
-
Last post by CTLeonard
Tue Apr 25, 2023 1:58 pm
-
-
FS Spot Light, Trouble Light SOLD PP
Replies: 1
by
got10carz » Tue Apr 25, 2023 1:31 pm
First post
For Sale, Light as pictured. Wood handle. Appears to plug into head light thimble. $20 Steve 701 212 5009
Last post
Nice light. Ill buy it.
- 1 Replies
- 706 Views
-
Last post by Novice
Tue Apr 25, 2023 1:58 pm
-
-
Westchester square no. 6 sidelight fs
Replies: 1
by
CTLeonard » Tue Apr 25, 2023 12:17 pm
First post
An all brass light. Top is dented and cracked. No font or burner. Has good glass and door with jewel 30.00 plus shipping. ctleonard64@gmail.com IMG_20230425_110923184.jpg IMG_20230425_110932537.jpg IMG_20230425_110917118.jpg IMG_20230425_110955379.jpg IMG_20230425_110944712.jpg
Last post
That woulda been accessory on a 1910 Maxwell.
- 1 Replies
- 491 Views
-
Last post by George House
Tue Apr 25, 2023 1:18 pm
-
-
- 0 Replies
- 688 Views
-
Last post by got10carz
Tue Apr 25, 2023 1:15 pm
-
-
4 rebiult coils FS Sold
Replies: 1
by
Nv Bob » Tue Apr 25, 2023 10:03 am
First post
Set of 4 coils new inside and new points tested on ECCT by professional coil rebiulder
Asking $180 to your door in the connected 48 states
Jalopyt@yahoo.com
Last post
Sold thanks mtfca and John
- 1 Replies
- 543 Views
-
Last post by Nv Bob
Tue Apr 25, 2023 11:51 am
-
-
Jno brown model 85 sidelight fs. Sold
Replies: 2
by
CTLeonard » Tue Apr 25, 2023 10:38 am
First post
Parts lamp. This is an all brass light. Top is beat pretty good. Door hinge is gone. Font and burner is good, as is one glass. Has a red jewel! 45.00 plus shipping. ctleonard64@gmail.com 16824334091148022414370986489673.jpg IMG_20230425_092339181.jpg IMG_20230425_092315460.jpg IMG_20230425_092327024.jpg
Last post
Sorry John. A matter of three minutes
- 2 Replies
- 518 Views
-
Last post by CTLeonard
Tue Apr 25, 2023 11:15 am
-
-
Stronghold Brakes
Replies: 1
by
Liberty Garage » Mon Apr 24, 2023 5:42 pm
First post
Stronghold brakes for small drum rearend. I only have parts shown. $200 + $25 ship
Last post
SOLD!! thanks MTFCA
- 1 Replies
- 850 Views
-
Last post by Liberty Garage
Tue Apr 25, 2023 10:15 am
-
-
09 double twist horns
by
Scott Rosenthal » Tue Apr 25, 2023 9:59 am
FS double twist brass horns(2). Both pristine show pieces. One marked Nonperiel 800.00. Other has no markings 700.00. 513 three seven eight 4325.
- 0 Replies
- 646 Views
-
Last post by Scott Rosenthal
Tue Apr 25, 2023 9:59 am
-
-
FS Lettered Pedals SOLD
Replies: 3
by
25tfire » Mon Apr 10, 2023 11:49 am
First post
FS set of lettered pedals (C R B) with new shafts. $250 plus Priority USPS shipping. Pictures to your text on request.
Last post
Sold Thanks Joe and MTFCA
- 3 Replies
- 1242 Views
-
Last post by 25tfire
Tue Apr 25, 2023 9:36 am
-
-
1926-7 Deck Lid
Replies: 5
by
BobP » Sun Apr 23, 2023 4:17 pm
First post
For sale barn fresh 1926-7 deck lid. No rust. It still has the original weather strip on the top edge. Has a very small dent on the bottom edge. Very good condition. $650. A new fiberglass one is $850. Located in Southern Minnesota. NO TEXTING. CALL five07458677eight.
Last post
New price, $550.
- 5 Replies
- 1030 Views
-
Last post by BobP
Tue Apr 25, 2023 7:55 am
-
-
WTB TT Radiator Apron
Replies: 3
by
Jeepbone1 » Sat Jun 25, 2022 7:17 am
First post
I need a nice radiator apron for my 27 TT. All I have is the shorter T aprons. Doesn’t need to be perfect. It’ll be painted to match the truck anyway. Call or text anytime at 540-7six1-two303 or email at bkirtner(at)gmail(dot)com. I can send PayPal, check or postal moneyorder. Thanks
Brad
Last post
Back to the top please!
Brad
- 3 Replies
- 1428 Views
-
Last post by Jeepbone1
Mon Apr 24, 2023 10:18 pm
-
-
WTB. KRW Engine Stand Base
Replies: 1
by
Dan Hatch » Sun Apr 23, 2023 11:06 am
First post
Doo anyone have a base for a KRW Engine Stand that they want to sell? Are you coming to Luray by chance? Email me at address in pictures. Thanks Dan
IMG_0260.jpeg
Last post
Back to the top
- 1 Replies
- 624 Views
-
Last post by Dan Hatch
Mon Apr 24, 2023 8:25 pm
-
-
WTB NOS front spring shackle for 1926
Replies: 1
by
Vonau » Mon Apr 24, 2023 6:03 pm
First post
I am looking for NOS or good original front spring shackles for my 1926 Touring.
Can anybody help me further?
Last post
We have NOS front U style shackles (Ford Script) available. Call Steven 1-800-Tparts1
Lang’s Old Car Parts
- 1 Replies
- 661 Views
-
Last post by Tparts
Mon Apr 24, 2023 8:20 pm
-
-
FS- single 30 x 3½ Budd Wire Wheel
by
Dan McEachern » Mon Apr 24, 2023 7:45 pm
One Budd wire wheel for Sale- Center is in great shape- rim is pretty beat up. $100.00 plus shipping UPS or USPS Flat Rate. Willing to ship complete wheel or just the center.
IMG_4918a.jpg
- 0 Replies
- 518 Views
-
Last post by Dan McEachern
Mon Apr 24, 2023 7:45 pm
-
-
FS: Kerosene Taillamp and Bracket…
Replies: 2
by
George House » Mon Apr 24, 2023 9:37 am
First post
…for 1916,17,18 thru non electric 25 roadster. Lamp super nice original with burner - no glass chips, no dents. Bracket cast or forged. Only $95 + USPS medium box. gwhouse73(one)(at)gmail.com
Last post
Sold to George M. Pending payment. 🙏 MTFCA and George
- 2 Replies
- 688 Views
-
Last post by George House
Mon Apr 24, 2023 6:31 pm
-
-
26-27 front corner brackets fs
by
CTLeonard » Mon Apr 24, 2023 2:43 pm
I have two pair of these brackets. 60.00 a pair plus shipping. Look at photos closely. ctleonard64@gmail.com IMG_20230424_131227321.jpg IMG_20230424_131237575.jpg IMG_20230424_131257925.jpg IMG_20230424_131306832.jpg
- 0 Replies
- 448 Views
-
Last post by CTLeonard
Mon Apr 24, 2023 2:43 pm
-
-
26-27 sediment bowl fs. Sold
Replies: 2
by
CTLeonard » Mon Apr 24, 2023 11:30 am
First post
Valve turns easily, will need to be cleaned out. 35.00 plus shipping. ctleonard64@gmail.com IMG_20230424_102829760.jpg IMG_20230424_102809412.jpg IMG_20230424_102803574.jpg
Last post
Sent you an email
- 2 Replies
- 689 Views
-
Last post by CTLeonard
Mon Apr 24, 2023 2:17 pm
-
-
HAIBE HiPOWER HEAD
Replies: 4
by
Temple2426 » Sun Apr 23, 2023 6:50 pm
First post
I have a Haibe Hipower Head for sale. It has been thermal cleaned In a Sunnen thermal bake System and ready to be painted and installed. The spark plug threads and deck surface are in great shape. No cracks that I can see. Located in Braxton Mississippi. I will ship at buyers expense. $450
Last post
Put me third on the list if things fall through or any others pop-up.
Thanks
- 4 Replies
- 1471 Views
-
Last post by Schrep771
Mon Apr 24, 2023 2:02 pm
-
-
FS: TT Runningboard…
by
George House » Mon Apr 24, 2023 12:00 pm
…of the longer “boot scraper” variety. $40 + the ride
gwhouse73(one)(at)gmail.com…See minor damage bottom right mounting hole. Easily repaired.
- 0 Replies
- 512 Views
-
Last post by George House
Mon Apr 24, 2023 12:00 pm
-
-
Early motor mount fs
by
CTLeonard » Mon Apr 24, 2023 10:53 am
30.00 plus shipping. ctleonard64@gmail.com IMG_20230424_095123059.jpg IMG_20230424_095139294.jpg
- 0 Replies
- 443 Views
-
Last post by CTLeonard
Mon Apr 24, 2023 10:53 am
-
-
Non Starter Transmissions FS
Replies: 3
by
Dan Hatch » Mon Mar 20, 2023 2:53 pm
First post
I have 3 complete non starter transmissions for sale. These are extra to me. $150 EACH. Pickup here or I can bring to Luray. Here pictures of 2 the other I have not gotten out yet. Email me at address in pictures. Thanks Dan
8AB8269E-C93D-4E4B-BC40-A766F4DDEF45.jpeg
EC78FA81-AC28-4EC4-8D28-6DD205F4C7F7.jpeg...
Last post
Still available can bring to Luray
- 3 Replies
- 983 Views
-
Last post by Dan Hatch
Mon Apr 24, 2023 10:14 am
-
-
Running board brackets fs. All sold
Replies: 5
by
CTLeonard » Fri Apr 21, 2023 1:12 pm
First post
Tired of moving them. 10.00 plus shipping gets you a set of four. ctleonard64@gmail.com IMG_20230421_120906909.jpg IMG_20230421_120918074.jpg
Last post
Email sent
- 5 Replies
- 1065 Views
-
Last post by JTT3
Mon Apr 24, 2023 9:37 am
-
-
More free Hardware - #8 Wood Screws & 1/4-20 Screws
Replies: 3
by
Rodger Erickson » Mon Apr 24, 2023 12:22 am
First post
Free: #8 wood screws with round head slotted drive, approx 1 1/4 length. Also 1/4 -20 x 0.75 round head slotted drive screws, with a few square nuts thrown in. I can fit maybe two or three lbs. of these into one small flat rate box. You pay shipping and they're yours.
8rnd01.jpg
q20rnd01.jpg
Thanks for looking!
Last post
Rodger, Please let me know if you have any more of these.
Thanks
Dennis
- 3 Replies
- 1006 Views
-
Last post by DontKnowMuch
Mon Apr 24, 2023 8:43 am
-
-
FS DEMOUNTABLE TRANSMISSION BAND SETS
Replies: 5
by
Mark Chaffin » Fri Apr 21, 2023 6:28 pm
First post
Four demountable band transmission band sets. Restored and ready for band lining. Each set as described below. Price is $75.00 per set plus $17.10 domestic shipping. Mark Chaffin (951) 805-0928
Set #1 26/27 band set. Slot and stake demountable ears. Sold
Set #2 09/25 band set. Pin and hole demountable ears.
Set #3 26/27 band set. Pin and hole...
Last post
2 sets remaining.
- 5 Replies
- 988 Views
-
Last post by Mark Chaffin
Mon Apr 24, 2023 12:39 am
-
-
PRICE REDUCED ! - ACE CAST IRON TIMER RAISER
Replies: 3
by
Jay In Northern Ca. » Fri Apr 07, 2023 3:11 pm
First post
This is a very well made period timer raiser. It comes with a wiper rotor but any Model T timer rotor or timer will work. Comes without the camshaft gear. Asking $35 plus postage.
Ace Timer Riser 1.jpg Ace Timer Riser 2.jpg Ace Timer Riser 3.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg
Last post
Hi Jay,
I have out of self defence tried to not buy any more Timer elivatores or Distributers that have a missing cam gear ( I have a box of
distributers & the like and gears that don't match anything) I do have a gear that looks like a match to that timer elivator. Can you give me
a tooth count and angle or pitch just in case I have a gear...
- 3 Replies
- 1157 Views
-
Last post by Craig Leach
Sun Apr 23, 2023 9:59 pm
-
-
- 5 Replies
- 1481 Views
-
Last post by SIR TIMOTHY
Sun Apr 23, 2023 9:25 pm
-
-
Kingston Coilbox Key
Replies: 6
by
ThreePedalTapDancer » Wed Aug 10, 2022 5:27 pm
First post
Original Kingston Coilbox key. Excellent condition. Very hard to find. 100.00 shipped lower 48.
B6B4FD38-9249-4E8C-906C-C9D068E59CEB.jpeg FF98D1F1-578F-412F-A34F-7D1CBBDD6B67.jpeg
Last post
Still have it, very hard to find for that perfect coil box restoration…
- 6 Replies
- 1714 Views
-
Last post by ThreePedalTapDancer
Sun Apr 23, 2023 9:02 pm
-
-
FS pair of 1909 Atwood Castle #84 brass headlights
Replies: 3
by
KimDobbins » Thu Apr 06, 2023 3:24 pm
First post
Pair of AC #84 headlights that were privately labeled for Dutie Wilcox Flint who was a large dealer in providence, RI. Very rare. $1600.00. Plus shipping. kdmks AT att.net.
Last post
Very cool Kim, they have the early tall F in the ford script !
- 3 Replies
- 995 Views
-
Last post by havnfun
Sun Apr 23, 2023 6:17 pm
-
-
PRICE LOWERED! - PAIR OF MODEL T AIR FRICTION ALUMINUM BODIED CARBURETORS
Replies: 1
by
Jay In Northern Ca. » Sat Mar 25, 2023 6:12 pm
First post
Pair of Air Friction carburetors in good condition for rebuild.They have Isinglass windows (Mica) on both sides of the fuel bowl so you can view the gas level! Asking $55 for the pair plus postage.
Air Friction pair 2.jpg Air Friction pair 3.jpg Air Friction pair 3.jpg air friction 4.jpg air friction 8.jpg
Please use this email address below...
Last post
.........................
- 1 Replies
- 881 Views
-
Last post by Jay In Northern Ca.
Sun Apr 23, 2023 4:23 pm
-
-
Fs two Heinze coil boxes
Replies: 2
by
Bjerm » Sun Apr 02, 2023 4:34 pm
First post
Two Heinze coil boxes missing lids $200each plus the ride best way to reach me is by email. Bjerm10@gmail.com
Last post
Back to the top
- 2 Replies
- 1118 Views
-
Last post by Bjerm
Sun Apr 23, 2023 1:14 pm
-
-
- 4 Replies
- 1293 Views
-
Last post by Vonau
Sun Apr 23, 2023 1:13 pm
-
-
W T B 1911 torpedo gas tank
Replies: 9
by
Burlingtontguy » Mon Feb 06, 2023 10:05 pm
First post
I am looking for a 1911 Torpedo Gas tank good original or new repop left over from an uncompleted project., Thanks, Dennis
Last post
to the top
- 9 Replies
- 2454 Views
-
Last post by Burlingtontguy
Sun Apr 23, 2023 12:58 pm
-
-
fan sold
Replies: 3
by
Melba Nolan » Fri Mar 17, 2023 11:29 am
First post
20230316_125051.jpg
for sale: fan, pulley and bracket $40 plus postage
20230316_125044.jpg 20230316_125051.jpg
Last post
sold pending payment
- 3 Replies
- 891 Views
-
Last post by Melba Nolan
Sun Apr 23, 2023 9:47 am
-
-
Free: 1920's Dyke's Encyclopedia in Poor Condition
Replies: 1
by
Rodger Erickson » Sun Apr 23, 2023 9:29 am
First post
Free: Dykes encyclopedia in poor condition. The front cover is missing along with several pages. Still too good to throw away, if you want it, it's yours, just pay shipping. This can go book rate so shipping won't be a lot of money. Thanks for looking.
dykes01.jpg
dykes02.jpg
Last post
I’ll take it. Best John
- 1 Replies
- 443 Views
-
Last post by JTT3
Sun Apr 23, 2023 9:43 am
-
-
F-S BRASS VALVE COVERS/RUBBER STEM
Replies: 3
by
John iaccino » Sat Apr 22, 2023 12:25 pm
First post
BRASS VALVE COVERS/RUBBER STEM. These are made to screw onto the rubber valve stem. Coker charges $32 each, buy all 4 for $100 plus flat rate shipping.
Last post
Email sent to Harry Lillo
- 3 Replies
- 832 Views
-
Last post by John iaccino
Sat Apr 22, 2023 10:20 pm
-
-
1909-1910 Kingston 5 Ball Carburetor
Replies: 7
by
ThreePedalTapDancer » Thu Oct 06, 2022 6:58 pm
First post
Nice 1909-1910 Kingston 5 ball carburetor. It is complete with float. Very clean condition. Some minor play in throttle shaft. Easy rebuild. Has hard to find fuel line elbow. Was a spare that I no longer need. 1300.00 includes shipping lower 48.
9ACCFF2B-B033-43C7-BD10-826A068CF95B.jpeg
Last post
Yes it is, email sent.
- 7 Replies
- 2174 Views
-
Last post by ThreePedalTapDancer
Sat Apr 22, 2023 8:57 pm
-
-
turtle deck
Replies: 3
by
Melba Nolan » Mon Dec 26, 2022 12:30 pm
First post
For sale: in good condition, has one place that has a crack that will need fixed. good plywood floor. $350 pickup only
20200618_170727.jpg 20200618_170759.jpg 20200618_172829.jpg 20200618_170827.jpg
Last post
move to top
- 3 Replies
- 1496 Views
-
Last post by Melba Nolan
Sat Apr 22, 2023 8:04 pm
-
-
engine support
Replies: 3
by
Melba Nolan » Fri Mar 03, 2023 9:18 pm
First post
for sale: front engine support 1917-1924 $20 plus postage
20220513_095526.jpg
Last post
move to top
- 3 Replies
- 1087 Views
-
Last post by Melba Nolan
Sat Apr 22, 2023 8:00 pm
-
-
Fan 20/25
Replies: 4
by
Melba Nolan » Fri Dec 23, 2022 12:10 am
First post
For sale: Fan surface rust but no holes 20/25 $10 plus postage
20221222_095140.jpg 20221222_095132.jpg
Last post
move to top
- 4 Replies
- 1223 Views
-
Last post by Melba Nolan
Sat Apr 22, 2023 7:57 pm
-
-
Truck Bed. Supposedly for a 1925 roadster - cheap
Replies: 1
by
RodMc » Sat Apr 22, 2023 5:06 pm
First post
I have had this wooden truck bed for over 40 years. I was told fits the 1925 Model T roadster that used to be in my garage as well.
Now I am retiring and moving and all the junk has to go.
If I can find a willing buyer that would be great, but in a couple of months it is going to the dump.
There are also a few old tires, but seeing as how they...
Last post
You could just leave it there. I'd love to move into a new place and find that in the garage!
- 1 Replies
- 662 Views
-
Last post by TXGOAT2
Sat Apr 22, 2023 7:07 pm
-
-
Early Model T Alternator Mounting Bracket
by
ModelTRoadster » Sat Apr 22, 2023 6:57 pm
Bracket kit for early Model T Ford. This kit will allow mounting and alternator on pre-1919 Model Ts. Please review the requirements and notes on the attached photo. Serious inquiries only, no solicitations. Contact Tom at 585-738-1988.
- 0 Replies
- 561 Views
-
Last post by ModelTRoadster
Sat Apr 22, 2023 6:57 pm
-
-
Packing truck for Luray
Replies: 1
by
BlackTinLizzie » Fri Apr 21, 2023 12:14 pm
First post
Here is a quick first list of parts going to Luray.
Shortened early rear end most likely for a tractor or snowmobile with short driveshaft
Small drum Rocky mountain brakes no rods or pedal
2 Bermuda bells
Non starter right hand drive hogs head with steering frame bracket
Early brass radiator no made in USA not perfect but held water
1912 hood no...
Last post
Will be adding more to the list as date nears.
- 1 Replies
- 724 Views
-
Last post by BlackTinLizzie
Sat Apr 22, 2023 5:24 pm
-
-
- 0 Replies
- 514 Views
-
Last post by KimDobbins
Sat Apr 22, 2023 4:14 pm
-
-
- 5 Replies
- 1538 Views
-
Last post by jscailik82
Sat Apr 22, 2023 2:11 pm
-
-
- 0 Replies
- 485 Views
-
Last post by KimDobbins
Sat Apr 22, 2023 1:58 pm
-
-
- 0 Replies
- 490 Views
-
Last post by KimDobbins
Sat Apr 22, 2023 1:45 pm
-
-
For Sale Peening Hammer
Replies: 4
by
WaltM » Tue Jan 31, 2023 5:06 pm
First post
For Sale: Peening Hammer $185. with free shipping in US only. Head diameter measures 1.183 inches. I don't see any markings on the tool. The ad below is from The Model T Ford Owner manual. Call or text (248) 894-75fiveone. Thanks, Walt
Last post
To the Top
- 4 Replies
- 1936 Views
-
Last post by WaltM
Sat Apr 22, 2023 11:21 am
-
-
- 4 Replies
- 1432 Views
-
Last post by WaltM
Sat Apr 22, 2023 11:20 am
-
-
6Th Annual Model T- Model A- Prewar Swap. Minnesota.
Replies: 14
by
BobP » Sun Mar 05, 2023 2:58 pm
First post
We are having our 6th annual Model T- Model A- prewar swap meet and car show at our farm Saturday, April 22, 2023 starting at 7AM. Free overnight primitive camping. Free setup, free admission. Rest room and lunch wagon on site. Location is 7525 County 12 Blvd, Kenyon, Mn. 55946. 50 miles south of St. Paul. Buy, sell, swap or look. Questions, Bob &...
Last post
Bttttttttttttttttttt
- 14 Replies
- 2834 Views
-
Last post by BobP
Fri Apr 21, 2023 9:04 pm
-
-
WTB: 1 manifold stud for my 1927 Tourung
Replies: 3
by
bmklawt » Fri Apr 21, 2023 7:00 pm
First post
I need one manifold stud, the kind threaded on both ends, of coarse I can't find my old ones, I have bolts on there now but think I could better fit the hot air pipe by double nutting the end of a stud.
Last post
I have many of each. shoulder & without. I’ll email you a picture so you can. match. later too night
The longer stud has enough threads on the block end for a nut & washer. The short stud with the stop requires the the clamp to be inverted. I also have some of the earlier short ones without the stop.
IMG_4717.JPG
--
stock.png
--
IMG_4719.JPG
- 3 Replies
- 799 Views
-
Last post by TRDxB2
Fri Apr 21, 2023 8:32 pm
-
-
Air Compressor FS
Replies: 4
by
Dan Hatch » Sat Jan 21, 2023 3:43 pm
First post
Here is a Quincy air Compressor I was keeping as a back up for my compressor. I have since picked up a IR unit as a back. I don’t need this one. It ran fine when I pulled it off a tank and scrap it. Had a 5 JP motor running it. It is two stage. Anyone want it for $50 pickup here. NO SHIPPING. Extra to me.
Or if you want parts off it we can talk....
Last post
Email sent
- 4 Replies
- 1361 Views
-
Last post by Grntea
Fri Apr 21, 2023 8:10 pm
-
-
- 1 Replies
- 1201 Views
-
Last post by ChrisB
Fri Apr 21, 2023 7:43 pm
-
-
- 0 Replies
- 590 Views
-
Last post by Layden Butler
Fri Apr 21, 2023 6:55 pm
-
-
split rims SOLD
Replies: 6
by
Melba Nolan » Wed Apr 19, 2023 10:19 am
First post
for sale: set of 2 split rims. good condition $200 plus shipping
email: melbanolan@aol.com or text 314-575-7115
Last post
sold pending payment
- 6 Replies
- 1244 Views
-
Last post by Melba Nolan
Fri Apr 21, 2023 6:41 pm
-
-
Stevens Front Axle Inserts FS
Replies: 60
by
Dan Hatch » Thu Aug 25, 2022 9:14 am
First post
Just got batch of Stevens Front Axle Inserts finished. Have both top and bottom in stock now. Sorry to say but yes there’s a price increase. Top tapered inserts $4.00 each. Lower threaded inserts $6.00 each. All + shipping. Better stock up way things are going may not be another run. Email me at address in pictures. Thanks Dan...
Last post
Received inserts and taps today from Dan, nice parts ...
Very Happy
Regards
Steve
- 60 Replies
- 9879 Views
-
Last post by Stevew
Fri Apr 21, 2023 6:00 pm
-
-
Brass steering gear case fs
Replies: 1
by
CTLeonard » Fri Apr 21, 2023 1:58 pm
First post
I guess that's what it's called. Has no gears. 80.00 plus shipping. ctleonard64@gmail.com IMG_20230421_125551232.jpg IMG_20230421_125520047.jpg IMG_20230421_125510180.jpg
Last post
I have gears if needed
- 1 Replies
- 615 Views
-
Last post by CTLeonard
Fri Apr 21, 2023 4:09 pm
-
-
Model T Coil Box Switch
Replies: 4
by
Unprr » Wed Apr 19, 2023 9:29 pm
First post
I have a Model T coil Box switch for sale. As the photos show, it’s in very good condition. I do not have a key but I showed how the switch ( photos ) moves as designed.
The brass face, as shown, is very nice.
Asking $200 + shipping. Sorry, no international shipping.
Last post
Sold thanks
- 4 Replies
- 1177 Views
-
Last post by Unprr
Fri Apr 21, 2023 4:00 pm
-
-
SOLD:PRICE REDUCED! Early Large Brass Solar 128-C Side Lamp c. 1908-1912
Replies: 13
by
GGZ » Thu Feb 02, 2023 3:36 pm
First post
SOLD and shipped to Bill!
Price reduced to 100.00 includes USA shipping.
Here is a nice, original, brass, large size Solar Model 128-C side lamp from the 1908-1912 era. This large lamp is about 11 tall and 7 1/4 diameter rim. The large round lens has a crack but the side lamp and red jewel are good. It has the Solar tag on the front as well as...
Last post
SOLD and shipped to Bill! Thank you.
- 13 Replies
- 2648 Views
-
Last post by GGZ
Fri Apr 21, 2023 3:50 pm
-
-
SOLD: PRICE REDUCED Very Large Brass Head or Side Lamp European c. 1900-1905
Replies: 13
by
GGZ » Thu Feb 02, 2023 5:06 pm
First post
Sold and shipped to Bill!
Price Reduced to 200.00 with shipping in USA
Here is a great, European or British all brass lamp. This could be a very large side lamp or a headlamp. It is all brass and is in nice condition with a good beveled lens. Very high quality. It measures about 16 tall and 7 3/8 rim and 6 3/4 in depth. A great lamp that would...
Last post
SOLD and shipped to Bill! Thank you.
- 13 Replies
- 2888 Views
-
Last post by GGZ
Fri Apr 21, 2023 3:48 pm
-
-
FS DEMOUNTABLE BAND SET
Replies: 3
by
Mark Chaffin » Tue Apr 04, 2023 3:33 pm
First post
Unique Raybestos Brand demountable band set (09-25). Neat accessory item. Price for the set is $60.00 plus $19.10 domestic shipping. Mark Chaffin (951) 805-0928
Ray 1.jpg
Ray 2.jpg
Ray 3.jpg
Last post
I forgot to post a thank you
I got them last week
Scott
- 3 Replies
- 821 Views
-
Last post by South park zephyr
Fri Apr 21, 2023 2:03 pm
-
-
09-25 Scandinavia Linings FS
Replies: 3
by
Jeepbone1 » Tue Apr 04, 2023 12:18 am
First post
Brand new from 1995! Band linings with rivets and box in excellent shape. $70 plus the ride. Call or text any time 54zero-7six1-2three03. PayPal f/f preferred. Will take a check or postal money order.
Brad
Last post
Got them today
Thanks
Scott
- 3 Replies
- 1048 Views
-
Last post by South park zephyr
Fri Apr 21, 2023 2:02 pm
-
-
Wanted 26-27 amp gauge
Replies: 4
by
NY John T » Wed Apr 19, 2023 3:18 pm
First post
Hi I'm lookin g for an original 20-20amp gauge in working condition. Anybody have one?
Thanks,
John
Last post
I have some, pm me
- 4 Replies
- 976 Views
-
Last post by Don ellis
Fri Apr 21, 2023 1:56 pm
-
-
Wood wheel brake drums fs. Sold
by
CTLeonard » Fri Apr 21, 2023 1:46 pm
30.00 plus shipping gets both. ctleonard64@gmail.com IMG_20230421_124425488.jpg IMG_20230421_124410853.jpg IMG_20230421_124418425.jpg IMG_20230421_124403287.jpg
- 0 Replies
- 426 Views
-
Last post by CTLeonard
Fri Apr 21, 2023 1:46 pm
-
-
Engine splash pans fs. Sold
Replies: 1
by
CTLeonard » Fri Apr 21, 2023 1:34 pm
First post
Don't know the years, pick a no. And make me an offer.5.00 each or the one you want. You pay shipping also. 10.00 plus shipping you can have all four. ctleonard64@gmail.com IMG_20230421_122833688.jpg IMG_20230421_122824892.jpg IMG_20230421_122814262.jpg
Last post
Email sent
- 1 Replies
- 497 Views
-
Last post by SteveD
Fri Apr 21, 2023 1:39 pm
-
-
FS Brass Carbide Generator $100 / SOLD!!
Replies: 2
by
Harry Lillo » Thu Apr 20, 2023 11:34 pm
First post
Unrestored brass carbide generator suitable for survivor car or for parts. The top tank has multiple vertical stress cracks all the way around. The bottom tank only has 3 cracks no dents and shows well from one side. The carbide basket is missing along with the water filler cap. The attached base is in very good condition with no dents. Height is...
Last post
The generator is sold.
Thank you for the many re[lies.
Thank you Phillip.
- 2 Replies
- 996 Views
-
Last post by Harry Lillo
Fri Apr 21, 2023 11:46 am
-
-
BUSINESS FOR SALE
Replies: 36
by
Chaffins » Sun Aug 04, 2019 4:02 pm
First post
CHAFFIN'S GARAGE ING. OUR RETAIL SALES ARE OVER $500,000.00/YEAR. WE MANUFACTURE OVER 300 NEW PARTS FOR THE MODEL T FORD, INCLUDING THE RUCKSTELL AXLE, NEW CAMSHAFTS, HIGH VOLUME INTAKE AND EXHAUST MANIFOLDS, RING AND PINION GEARS, ALL OF THE FRONT AND REAR SPRING SHACKLES, CLUTCH SPRING, BOSCH PLATE DISTRIBUTOR, BRASS ROBE RAIL AND THE LIST GOES...
Last post
Remove EMILY TOO
- 36 Replies
- 13667 Views
-
Last post by TRDxB2
Fri Apr 21, 2023 11:27 am
-
-
Speedometer Stewart 26
by
MNToys » Fri Apr 21, 2023 9:22 am
This speedometer is a “D” ser #. The trip reset button is broken. It works correctly when you spin the input. The face is in very nice shape. Asking $135 including shipping to the lower 48.
Thanks!
Nick
PSUNicholas@yahoo.com
551 427 1593
7418662F-9B52-4940-84E1-2DEAE35B7EA0.jpeg 60696E89-9730-4066-8236-977A6C15BB03.jpeg...
- 0 Replies
- 548 Views
-
Last post by MNToys
Fri Apr 21, 2023 9:22 am
-
-
1910 model t ford chassis
by
Jakekj » Fri Apr 21, 2023 6:28 am
I have what I believe is a 1910 frame. Doesn't have the bolt on ears on rear crossmember has riveted brackets. Pitted. Will get some photos.
- 0 Replies
- 841 Views
-
Last post by Jakekj
Fri Apr 21, 2023 6:28 am
-
-
- 9 Replies
- 1721 Views
-
Last post by wjmodelt
Fri Apr 21, 2023 12:28 am
-
-
Another Free to Good Home - 1/2" Lock Washers
Replies: 5
by
Rodger Erickson » Sat Nov 12, 2022 9:53 pm
First post
Free: approx 300 pcs. (Fits in a USPS Small Flat Rate box) unplated steel lock washers, fits 1/2 threads. You pay shipping. Again, sorry if this seems a little off-topic, but Model T Guys seem to be the only people interested in stuff like this. Thanks for looking!
05lw01.jpg
Last post
Lock washers are gone.
Thanks MTFCA.
- 5 Replies
- 1766 Views
-
Last post by Rodger Erickson
Thu Apr 20, 2023 11:40 pm
-
-
Loading trailer for Luray!
Replies: 6
by
Dan Hatch » Sun Apr 02, 2023 2:42 pm
First post
I am starting to load trailer for Luray. Looking through my “I have a dream collection “ for things. So far
23/25 Sedan Rear NOS Fenders
1914 Rootlieb Front Fender set
2 sets 1913/14 Rear Fenders
1915 Rootlieb WIDE TRACK Fenders set
1915 original WIDE TRACK Front Fender
Tapered Leaf Rear Springs
Spring spreader
Big box of A parts
1914...
Last post
I am interested in the 1911 radiator.
- 6 Replies
- 1961 Views
-
Last post by tom_strickling
Thu Apr 20, 2023 9:53 pm
-
-
Kingston 4 ball carb
by
colonelpowers » Thu Apr 20, 2023 8:47 pm
I went out to help a young guy get his 26 T running today and show him how to drive it. When I raised th hood I was surprised to see a nice polished 4 ball Kingston. We got the car started and it ran pretty good but the choke/mixture linkage for a 26 doesn't work with that carb. To start it it took someone outside to choke it and adjust the carb....
- 0 Replies
- 566 Views
-
Last post by colonelpowers
Thu Apr 20, 2023 8:47 pm
-
-
13/32 X 16 TPI Tap ANNOUNCEMENT TAPS READY
Replies: 79
by
Dan Hatch » Thu Feb 16, 2023 1:57 pm
First post
These are for the Pinion Bearing Bolts. Special size not available at hardware store.
Please use email address in picture, not PM
Taps are done! Sending out totals
I have some extra taps if you want one email me at address in pictures
I have had inquiries about making another run of these. If you are interested list it here or send me an...
Last post
Very few left, if I still have any I will bring to Luray. But you better make arrangements to be sure you get one.
- 79 Replies
- 15755 Views
-
Last post by Dan Hatch
Thu Apr 20, 2023 1:49 pm
-
-
coil box with coils reduced price
Replies: 2
by
Perry Goble » Sun Apr 02, 2023 5:51 pm
First post
Metal coil box with coils . was working when taken out of car some years ago . 250.00 plus shipping .
Last post
to the top
- 2 Replies
- 1333 Views
-
Last post by Perry Goble
Thu Apr 20, 2023 11:48 am
-
-
No longer available
Replies: 4
by
Adam » Wed Feb 08, 2023 5:32 pm
First post
No longer available
Last post
No longer available
- 4 Replies
- 1357 Views
-
Last post by Adam
Thu Apr 20, 2023 10:44 am
-
-
4/19, new price & FREE SHIPPING; Complete set of 4 very good TT brake shoes w/ decent lining.
Replies: 3
by
Adam » Mon Jan 23, 2023 12:57 pm
First post
Here’s a set of 4 TT shoes that have been ultrasonic cleaned in hot solvent to get as much oil as possible out of the linings. The linings are decent and the shoes are all in good solid condition. If you have much experience with TT’s you know that rear brake shoes are often found broken and no reproductions are available. $350 takes the set....
Last post
4/19 new price & added FREE SHIPPING.
- 3 Replies
- 1074 Views
-
Last post by Adam
Thu Apr 20, 2023 10:43 am
-
-
FS RUCKSTELL PARTS
Replies: 5
by
Mark Chaffin » Wed Apr 19, 2023 6:41 pm
First post
Some pretty darn good looking Ruckstell parts here. Very minimal wear. Get the whole lot $300 plus domestic shipping. Mark Chaffin (951) 805-0928
Ruckstell1.jpg
Ruckstell2.jpg
Last post
I understand the time change issue. Going on day three. Still waiting for his shipping address information to provide quote.
- 5 Replies
- 1395 Views
-
Last post by Mark Chaffin
Thu Apr 20, 2023 10:07 am
-
-
- 7 Replies
- 1562 Views
-
Last post by Scott_Conger
Thu Apr 20, 2023 9:28 am
-
-
- 4 Replies
- 1358 Views
-
Last post by WaltM
Thu Apr 20, 2023 8:13 am
-
-
1920s pedal car FS
by
Nv Bob » Thu Apr 20, 2023 1:23 am
Orginal model T era lots character yet perfect foe grand kids
Asking $1000 may trade buddy l or keystone steel toys of the same era
Pickup or find a ride
Nvbob
Sparks Nv
Jalopyt@yahoo.com
- 0 Replies
- 688 Views
-
Last post by Nv Bob
Thu Apr 20, 2023 1:23 am
-
-
WTB Driver's side windshield stanchion (post)
Replies: 7
by
TSMock » Fri Mar 10, 2023 6:38 pm
First post
I have a 1923 roadster and I would like to add cowl lamps. I found one on T bay but I need the driver's side to have a pair. If you have a pair and don't want to separate them, I will buy both. I would prefer to match the one that I have. Photos and measurements are in my post.
IMG_9380.JPG
IMG_9379.JPG
IMG_9378.JPG
IMG_9377.JPG...
Last post
Yes, the driver is on the left side when sitting in the car, so that is what I mean when I say driver's side.
- 7 Replies
- 1471 Views
-
Last post by TSMock
Wed Apr 19, 2023 11:27 pm
-
-
WTB American Bosch Distributor Parts
Replies: 26
by
Bryant » Sat Aug 13, 2022 7:54 am
First post
I know it’s not easy but Iam looking for parts for the American Bosch distributor. Type T-448. Manly the distributor cap. Part#65942. Also any surviving information books on the distributor. Thanks B6E467FE-99CB-4721-9808-92D022F342D6.jpeg
Last post
Thanks Jerry! I think I’ve seen those before but wasn’t clear if they where for my distributor.
Thanks Frank for all the good info! The gears I have look to be repaired and I don’t think I will trust them.
Paul I sent you a email
Bryant
- 26 Replies
- 5100 Views
-
Last post by Bryant
Wed Apr 19, 2023 6:01 pm
-
-
Bruce McCalley Model T Ford Hardcover
Replies: 2
by
jwrightjr » Tue Apr 18, 2023 6:28 pm
First post
Somehow I ended up with 2 copies of Model T Ford The car that changed the world by Bruce W McCalley. As good as the book is I can only read one at a time :lol: So I am offering my extra copy for $40 plus media mail shipping or whatever if you want it faster. Book is in as new condition with no marks I can find. PM or email works.
Last post
SPF to Jesse
- 2 Replies
- 977 Views
-
Last post by jwrightjr
Wed Apr 19, 2023 5:35 pm
-
-
Water outlet and fan fs. Sold
Replies: 1
by
CTLeonard » Wed Apr 19, 2023 3:52 pm
First post
26-27 outlet fan and pulley. 40.00 plus shipping. ctleonard64@gmail.com IMG_20230419_144831320.jpg IMG_20230419_144807220.jpg IMG_20230419_144820018.jpg
Last post
Hello
Is the outlet fan and pulley still available?
Best regards
Beat
- 1 Replies
- 622 Views
-
Last post by Vonau
Wed Apr 19, 2023 5:22 pm
-
-
Model T Doors 1926/27
Replies: 3
by
Dietcoke! » Wed Apr 19, 2023 2:39 pm
First post
1926/7 Model T doors, Four with hinges, some intact glass and handels. $500 OBO
Pictures upon request
Located in Omaha
Contact Julia
Last post
2 Door or 4 Door sedan? It makes a big difference. One will not fit the other, and since you appear to have 4 doors for sale, they probably came off of a 4 door sedan. If they are for a 4 door sedan, the rear doors should be shaped differently from the front doors.The driver's (left) side doors should be a mirror image of its mate (passenger or...
- 3 Replies
- 967 Views
-
Last post by ModelTWoods
Wed Apr 19, 2023 5:02 pm
-
-
F/S Ford Methods Shops Original Book and others
Replies: 3
by
rschnell78 » Sun Apr 16, 2023 2:21 pm
First post
I have the following books for sale-
Ford Methods & Shops 1919 Edition. This is an original not a reprint. Book is in good condition, all pages & fold outs are complete. This book is hard to find and the photos are crisp & clear unlike the reprints. $250
The Selling Process by Norval Hawkins. Hawkins was a Ford employee and later went out on...
Last post
On a personal note, I have a reprinted edition of Ford Methods & Shops. It's a great book, and I must admit, I envy you a little. It's a treasure for any Ford enthusiast. Interestingly, my son recently wrote a research paper on this book. He embarked on an in-depth exploration of its content and found a wealth of helpful information. To aid him in...
- 3 Replies
- 1182 Views
-
Last post by Ben77
Wed Apr 19, 2023 1:35 pm
-
-
Bosch style dist. Fs. Sold
Replies: 7
by
CTLeonard » Mon Apr 17, 2023 11:46 am
First post
For non generator car. Has model a dist. Points and condenser readily available. 295.00 plus shipping. ctleonard64@gmail.com IMG_20230417_104057725.jpg IMG_20230417_104030163.jpg IMG_20230417_104040161.jpg
Last post
To David from down under. Tried to return email, came back as incomplete. Would you email me again. ctleonard64@gmail.com
- 7 Replies
- 1453 Views
-
Last post by CTLeonard
Wed Apr 19, 2023 10:44 am
-
-
FS HOOD SHELF SETS
Replies: 2
by
Mark Chaffin » Tue Apr 18, 2023 7:36 pm
First post
I have two sets of hood shelves available for purchase. These currently are not available from the dealers. Prices and description are as indicated below. Actual domestic shipping will be an additional charge. Mark Chaffin (951) 805-0928
Set #1 1916-1922 radiator hood shelf set in excellent condition $50.00
Set #2 1916-1922 radiator hood shelf...
Last post
Set #1 pending sold to Jim.
- 2 Replies
- 876 Views
-
Last post by Mark Chaffin
Wed Apr 19, 2023 10:14 am
-
-
FS ENGINE SPLASH PAN SETS
Replies: 2
by
Mark Chaffin » Tue Apr 18, 2023 7:32 pm
First post
I have several engine splash pan sets available for purchase. Prices and description are as indicated below. Actual domestic shipping will be an additional charge. Mark Chaffin (951) 805-0928
Set #1 1919-1927 set in used condition $75.00
Set #2 1919-1927 in good used condition $95.00
Set #3 1919-1927 in excellent condition $125.00 SOLD
Set #4...
Last post
Set #4 pending sold to Bill. Set #3 pending sold to Beat.
- 2 Replies
- 826 Views
-
Last post by Mark Chaffin
Wed Apr 19, 2023 10:12 am
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum