Classifieds - Parts - Page 72

Classifieds - Parts

New Topic

9300 topics

Page 72 of 93
- Jump to page:
Previous
1
…
70
71
72
73
74
…
93
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

79887 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

For sale 13/14 John Brown headlamp

Last post by Model T Mark « Wed May 17, 2023 8:03 am

by Model T Mark » Wed May 17, 2023 8:03 am

Decent Black and brass headlamp. Decent brass. Mirror has a chipped edge. Missing burner but has stand. Took it in as partial payment for rebuilding a rearend. 225.00 plus shipping.
Mark Eyre meyre14t@yahoo.com

0 Replies

648 Views

Last post by Model T Mark
Wed May 17, 2023 8:03 am
FRONT FLOOR BOARD SUPPORTS

Last post by Dan McEachern « Tue May 16, 2023 10:54 pm
Replies: 5
by Sanary22FT » Mon May 15, 2023 2:41 pm

First post

Hello, i found this parts.
Where do you buy ?

S-176 - 22-25 TOURING AND ROADSTER FRONT FLOOR BOARD SUPPORTS (PR)

Thanks for the help

Last post

HI Scott- you might be correct regarding the correct supports. Perhaps someone else will need the ones I have for their project.
Mine obviously have provision for the three body mount bracket bolts to pass thru the supports I have.

5 Replies

1217 Views

Last post by Dan McEachern
Tue May 16, 2023 10:54 pm
Rug rsil for sale

Last post by Ken Buhler « Tue May 16, 2023 9:30 pm
Replies: 1
by Allan » Tue May 16, 2023 6:51 am

First post

This original accessory item is all brass, nickel plated, including the mounting screws. 29 wide. $85 including postage to your door.
Allan from down under. 20230516_171323.jpg 20230516_171323.jpg

Last post

Allan,
That's a beautiful piece. When yours is sold, I will post mine which is useable but not as nice.
For now, if you call it a Robe Rail, the trout might grab the hook.
OT, I took the OF apart, it's really nice inside, thanks.

1 Replies

759 Views

Last post by Ken Buhler
Tue May 16, 2023 9:30 pm
Metzger

Last post by GOLDBARBILL « Tue May 16, 2023 12:59 pm

by GOLDBARBILL » Tue May 16, 2023 12:59 pm

WTB. Support Rods for a Metzger Automatic Windshield. Bill @ 360=544=2160

0 Replies

709 Views

Last post by GOLDBARBILL
Tue May 16, 2023 12:59 pm
Water pump

Last post by Franko « Tue May 16, 2023 11:17 am
Replies: 1
by Franko » Tue May 16, 2023 10:55 am

First post

Used Texas T. Water pump. Removed from my 26. Good condition! $150. Plus shipping. Tim at. 216-387-9544 .

Last post

Sold to David from Tenn. within. 5 minutes

1 Replies

647 Views

Last post by Franko
Tue May 16, 2023 11:17 am
WTB: 12 or 13 tooth pinion

Last post by Mark Gregush « Tue May 16, 2023 1:24 am
Replies: 3
by popeyet » Mon May 15, 2023 10:20 am

First post

looking for a 12 tooth pinion to put in my roadster. Suppliers do not seem to have them in stock.

Thanks for the tips guys, I do have the recessed 40 tooth Ruckstell ring gear and I do have Rocky Mountain brakes. I With the lightness of the roadster and good running engine I think the 3.07:1 or 3:33 ratio will be what I want. I did find a 13...

Last post

Edit your title and put wanted in it.

3 Replies

1075 Views

Last post by Mark Gregush
Tue May 16, 2023 1:24 am
FOR SALE - BRASS ERA OVER THE AXLE WISHBONE PERCH SET

Last post by Jay In Northern Ca. « Mon May 15, 2023 11:03 pm

by Jay In Northern Ca. » Mon May 15, 2023 11:03 pm

Pair of left and right used perch's. One with a bushing and one without. Asking $75 for the set plus postage SOLD!
Earl perch set 2.jpg Earl perch set 1.jpg

Pair of left and right used perch's. One with a bushing and one without. Asking $75 for the set plus postage.
email.jpg

0 Replies

753 Views

Last post by Jay In Northern Ca.
Mon May 15, 2023 11:03 pm
FOR SALE - 1924 CALIFORNIA COMMERCIAL LICENSE PLATE

Last post by Jay In Northern Ca. « Mon May 15, 2023 10:44 pm

by Jay In Northern Ca. » Mon May 15, 2023 10:44 pm

Metal is nice and straight and in good condition. Asking $45 plus postage.SOLD!
1924 California Commercial License Plate 1.jpg 1924 California Commercial License Plate 2.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

0 Replies

577 Views

Last post by Jay In Northern Ca.
Mon May 15, 2023 10:44 pm
PRICE LOWERED - THE ROAD LAWS OF CALIFORNIA 1919-1920 ,482 PAGES HARD BOUND

Last post by Jay In Northern Ca. « Mon May 15, 2023 8:49 pm
Replies: 1
by Jay In Northern Ca. » Fri Feb 24, 2023 5:37 pm

First post

This book is in super clean mint condition and was the Bible of Road laws in California during 1919 thru 1920. Asking $30 post paid to your door in the U.S. only. The Road Laws Of California 1919-1920 2.jpg The Road Laws Of California 1919-1920 1.jpg The Road Laws Of California 1919-1920 3.jpg

Please use this email address below and NOT the...

Last post

PRICE LOWERED!

1 Replies

711 Views

Last post by Jay In Northern Ca.
Mon May 15, 2023 8:49 pm
PRICE REDUCED!! - LOT OF 27 USED MODEL T HUBCAPS

Last post by Jay In Northern Ca. « Mon May 15, 2023 8:43 pm
Replies: 1
by Jay In Northern Ca. » Fri May 12, 2023 7:43 pm

First post

These are barn fresh with a few having bumps and bruises. Asking $65 plus postage.SOLD!
Ford hubcaps 2.jpg Ford hubcaps 1.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

PRICE REDUCED!

1 Replies

764 Views

Last post by Jay In Northern Ca.
Mon May 15, 2023 8:43 pm
WTB 1917-1922 Touring front floorboards

Last post by Belliott3 « Mon May 15, 2023 5:58 pm

by Belliott3 » Mon May 15, 2023 5:58 pm

Looking for a usable set of original front floorboards for a 1922 Touring: anything from 1917-1922. Bill 586-651-5760

0 Replies

443 Views

Last post by Belliott3
Mon May 15, 2023 5:58 pm
12v Converted T Starter For Sale

Last post by AdminJeff « Mon May 15, 2023 3:53 pm
Replies: 2
by AdminJeff » Wed Apr 19, 2023 1:16 am

First post

I just finished ONE 12v starter conversion. These are such a PITA! I'm not sure how many more of these I'm going to do.

New brushes, new field coils, oil seal/main shaft bearing update, reconditioned armature, the works. All detailed here:

More info on the 12v conversions here:

$525 plus $28 shipping in a custom wood box, with core swap.

I...

Last post

SOLD! But I can build more if someone needs one.

2 Replies

772 Views

Last post by AdminJeff
Mon May 15, 2023 3:53 pm
Victor model 12 headlight bucket fs

Last post by CTLeonard « Mon May 15, 2023 10:11 am
Replies: 1
by CTLeonard » Tue Apr 18, 2023 1:50 pm

First post

This is a dent free bucket. Got blasted and now has surface rust. Not pitted very good bucket. 30.00 plus shipping. ctleonard64@gmail.com IMG_20230418_124624025.jpg IMG_20230418_124558827.jpg IMG_20230418_124633092.jpg

Last post

Xxxxxxxxxxx

1 Replies

677 Views

Last post by CTLeonard
Mon May 15, 2023 10:11 am
John Brown Model 16 Gas Lights Pair

Last post by catfishunter99 « Mon May 15, 2023 6:59 am
Replies: 5
by catfishunter99 » Sun May 14, 2023 11:12 am

First post

John Brown Model 16 acetylene headlights complete with mounting forks and burners. Just out of long term dry storage. Both housings are rust and dent free. Both chimneys are also dent free. One rim is near perfect and the other has soft dents that would be easily removed. No cracks in any of the brass or steel. One reflector is very good and the...

Last post

Sold! Thanks MTFCA!

5 Replies

1322 Views

Last post by catfishunter99
Mon May 15, 2023 6:59 am
F-S Spark plug wire set '26-'27

Last post by John iaccino « Sat May 13, 2023 6:26 pm
Replies: 1
by John iaccino » Tue Apr 25, 2023 3:00 pm

First post

Spark plug wire set, new. $12 plus flat rate shipping

Last post

Please re-post

1 Replies

807 Views

Last post by John iaccino
Sat May 13, 2023 6:26 pm
F-S Early Front Bearing Pieces

Last post by John iaccino « Sat May 13, 2023 6:25 pm
Replies: 1
by John iaccino » Wed Apr 26, 2023 2:53 pm

First post

Early Front Bearing Pieces. Make offer. $10.50 Flat rate shipping.

Last post

Please re-post

1 Replies

935 Views

Last post by John iaccino
Sat May 13, 2023 6:25 pm
PRICE LOWERED! - KIRSTIN FIL-GAGE VISIBLE FILLER/GAUGE FOR MODEL T SEDANS TO 1923 NOS COMPLETE IN THE ORIGINAL BOX

Last post by Harry Lillo « Sat May 13, 2023 4:09 pm
Replies: 4
by Jay In Northern Ca. » Sat Apr 29, 2023 8:21 pm

First post

This is a excellent brand new 100 year old accessory Filler/visible see in the dark from the drivers seat gas gauge! Comes with the original paper work and template ready to install on your T. Asking $150 plus postage.
Kistin Fill gauge 1.jpg Kistin Fill gauge 2.jpg Kistin Fill gauge 3.jpg Kistin Fill gauge 4.jpg

Please use this email address...

Last post

Jay,
I will take it for Rosalie's fire truck
Harry

4 Replies

1480 Views

Last post by Harry Lillo
Sat May 13, 2023 4:09 pm
FS Stromberg OF carb

Last post by KimDobbins « Sat May 13, 2023 9:01 am
Replies: 8
by KimDobbins » Tue Mar 28, 2023 6:16 pm

First post

For Sale is a NOS gold plated Stromberg OF. Complete beautiful carb. $800.00. Kdmks AT att.net.

Last post

The story I got was it was a salesman's sample. Carb is sold.

8 Replies

2681 Views

Last post by KimDobbins
Sat May 13, 2023 9:01 am
Steering column fs. Sold

Last post by TWrenn « Sat May 13, 2023 8:49 am
Replies: 3
by CTLeonard » Fri May 12, 2023 12:02 pm

First post

Believe this to be the 13-15 era. Teeth on quadrant are worn. 270.00 plus shipping. ctleonard64@gmail.com 16839072418122395077215771813255.jpg 16839072624192280654877988278021.jpg 1683907277344378292411354998836.jpg 1683907298284276297975038350632.jpg

Last post

Offset hole definitely a 12 feature, has square holes instead of round and the flattened control rods which were 13 features. Would be interesting to see the control rods if they have the checkered pattern. I’m guessing late 12 early 13.

'13 also had the offset bolt hole. Sadly, and probly no one will ever know exactly when, the change was made...

3 Replies

995 Views

Last post by TWrenn
Sat May 13, 2023 8:49 am
FOR SALE - MODEL T STANDARD BRAND BRASS BULB HORN

Last post by Jay In Northern Ca. « Fri May 12, 2023 10:10 pm

by Jay In Northern Ca. » Fri May 12, 2023 10:10 pm

This original horn marked STANDARD is in very nice condition for it's age. The horn bell measures five and a half inches by four and a quarter inches.It comes with a four foot long brass horn tube and will need a reed for the reed chamber available from the vendors along with a rubber horn bulb. Asking $275 plus postage.
Standard horn 1.jpg...

0 Replies

705 Views

Last post by Jay In Northern Ca.
Fri May 12, 2023 10:10 pm
FOR SALE - NEVEROUT TAILIGHT BRACKET TO BAYONET MOUNT A ELECTRIC TAIL LIGHT TO A OIL TAIL LIGHT MOUNT

Last post by Jay In Northern Ca. « Fri May 12, 2023 9:42 pm

by Jay In Northern Ca. » Fri May 12, 2023 9:42 pm

This bracket and tail lamp allows you to easily switch between a brass era kerosene lamp and a electric lamp.The brass Neverout light is missing the clear glass insert. The bracket fits a stand size taillight electric socket so a different tail light could also be used with this hard to find bracket. Asking $75 plus postage. SPOKEN FOR!
neverout...

0 Replies

696 Views

Last post by Jay In Northern Ca.
Fri May 12, 2023 9:42 pm
Looking for brass running board step plates

Last post by kommandant 95 « Fri May 12, 2023 9:33 pm
Replies: 2
by kommandant 95 » Sun Apr 30, 2023 8:32 pm

First post

I'm looking for brass step plates as no model T parts dealers have new stock. I can do with one, three is preferable. Open to the new style with the black or the older style with no paint. Please contact me if interested in selling.

Last post

Hi fronty,
Sorry for the long delay, I've been busy. If you could send me a photo to my email, click the contact bubble under my name and I believe it will send it to my email.

2 Replies

921 Views

Last post by kommandant 95
Fri May 12, 2023 9:33 pm
FS MISCELLANEOUS LOT #2

Last post by Bill Mullins « Fri May 12, 2023 8:52 pm
Replies: 10
by Mark Chaffin » Mon Mar 13, 2023 6:02 pm

First post

Miscellaneous items as described below. Domestic shipping extra. Mark Chaffin (951) 805-0928

Lot 3.jpg

1. Rear axle bearings and drive shaft bearing new $30.00 plus $10.20 domestic shipping SOLD
2. Wood transmission band set (09-25) $40.00 plus $10.20 domestic shipping.
3. Dash light new $20.00 plus $10.20 domestic shipping.
4. Spark plug set...

Last post

I will take #4 spark plug set. Bill

10 Replies

2313 Views

Last post by Bill Mullins
Fri May 12, 2023 8:52 pm
FOR SALE - HAND PULL DASHBOARD CLAMP ON CONTROL CABLE

Last post by YellowTRacer « Fri May 12, 2023 5:03 pm
Replies: 2
by Jay In Northern Ca. » Thu May 11, 2023 10:34 pm

First post

This is a nice period cast iron dashboard clamp on control cable so no holes need to be drilled to install it.Cable measures six foot long so this can be used for a exhaust whistle instead of a kick pedal or other cable pull accessory. Asking $55 plus postage.SOLD!
clamp on Dash pull cable 1.jpg clamp on Dash pullcable 2.jpg
Please use this...

Last post

Jay, if Scott doesn't buy it I will.

Ed aka #4

2 Replies

798 Views

Last post by YellowTRacer
Fri May 12, 2023 5:03 pm
Stromberg LF Carburetor (SOLD)

Last post by ThreePedalTapDancer « Fri May 12, 2023 4:39 pm
Replies: 6
by ThreePedalTapDancer » Wed Nov 16, 2022 5:36 pm

First post

Stromberg LF carburetor and matching pre-heater. The carburetor is in solid clean condition, only missing fuel inlet banjo bolt on bottom of float chamber. Very little play on throttle arm, moves smoothly. Includes barrel float, but requires solder repair of two small cracks to seal float. Venturi appears intact peering down throat. Includes...

Last post

Still available.

6 Replies

2011 Views

Last post by ThreePedalTapDancer
Fri May 12, 2023 4:39 pm
Zero Maintenance Timer

Last post by SurfCityGene « Fri May 12, 2023 1:09 pm
Replies: 9
by MKossor » Sat Mar 25, 2023 11:43 am

First post

Tired of messy timer maintenance every 500 Miles? Surging, jerking, missing....

An Ideal Timer is completely maintenance Free and direct drop in replacement for the stock mechanical timer. Start on battery and run on Magneto, the I-Timer is immune to timing cover misalignment and provides reliable coil activation precisely synchronized with...

Last post

WOW!! I just saw that post also... Very confusingly interesting was the wording of that post and then to see it was his first sign in and post??

Never trust the computer out of your site...

Thanks for catching that!

BTW I have been using the Etimer now for years. I find it's very serviceable but I have never had to open it up??./@?

Thanks Mike

9 Replies

3043 Views

Last post by SurfCityGene
Fri May 12, 2023 1:09 pm
FOR SALE - FORD SPECIAL STEWART SPEEDOMETER FOR RESTORATION

Last post by Tim D « Fri May 12, 2023 9:38 am
Replies: 2
by Jay In Northern Ca. » Thu May 11, 2023 9:46 pm

First post

This will need the mechanism cleaned and restored since the needle does not spin and the mileage won't reset. Asking $75 plus postage.SOLD!
Ford Special Stewart Speedometer 1.jpg Ford Special Stewart Speedometer 2.jpg Ford Special Stewart Speedometer 3.jpg
Please use this email address below and NOT the personal messaging system to contact me....

Last post

If it falls thru I would like to be 2nd.

2 Replies

908 Views

Last post by Tim D
Fri May 12, 2023 9:38 am
Wanted 1917 touring top irons

Last post by Cjohns1 « Fri May 12, 2023 8:23 am
Replies: 2
by Cjohns1 » Thu May 04, 2023 12:35 pm

First post

Looking for top irons for 1917 touring for a reasonable price. Thanks!

Last post

Hi Curtis, email just sent.

Thanks,

Collin

2 Replies

779 Views

Last post by Cjohns1
Fri May 12, 2023 8:23 am
WTB key #58 and rearview mirrors for 1920 Roadster

Last post by Matt in California « Thu May 11, 2023 8:46 pm
Replies: 1
by Matt in California » Wed May 10, 2023 12:08 am

First post

A friend recently picked up a roadster that was almost complete except It didn’t have mirrors or the key. If you have either the key number 58 or mirrors please message me with the price and shipping to California.

Last post

No responses yet. I am looking for a rearview mirror for an open car. It is okay if it is not exactly the correct year...

1 Replies

767 Views

Last post by Matt in California
Thu May 11, 2023 8:46 pm
Wanted for '26/'27

Last post by Daktarirp « Thu May 11, 2023 7:59 pm

by Daktarirp » Thu May 11, 2023 7:59 pm

Wanted: '26/'27 taillight / tag bracket (do not need fender mounting bracket). Also, Victoria accessory stop/tail light (complete) which snaps in in place of standard taillight. See pictures.

0 Replies

686 Views

Last post by Daktarirp
Thu May 11, 2023 7:59 pm
WTB rear axle sleeve puller

Last post by catfishunter99 « Thu May 11, 2023 7:52 pm

by catfishunter99 » Thu May 11, 2023 7:52 pm

Looking for a used sleeve puller for a 27 car axle. I know I can buy one new but thought I'd see if someone had a spare to part with for less.

0 Replies

567 Views

Last post by catfishunter99
Thu May 11, 2023 7:52 pm
For Sale: Lot of Fuel Sediment Bowls for parts

Last post by John Haynes « Thu May 11, 2023 5:33 pm
Replies: 2
by John Haynes » Thu May 11, 2023 4:11 pm

First post

For Sale are 11 sediment bowls for parts or repair. Included are 1 Brass , 10 cast Iron. 5 have the shut off handles and 6 have the shut off handles missing or broken. Will ship in large flat rate box. $40.00 plus shipping ($22.80). Please contact me by email, I don't see the PM's.

Last post

The sediment bowls are SOLD. Thank you MTFC and thank you Richard!

2 Replies

840 Views

Last post by John Haynes
Thu May 11, 2023 5:33 pm
FS - Coil Tester

Last post by MKossor « Wed May 10, 2023 10:58 pm
Replies: 5
by MKossor » Sat Mar 25, 2023 9:17 am

First post

Spring is finally here!

Learn about the art of coil testing and tuning here:

Webinar2.JPG

Get the tools needed to keep your Model T coils
running at peak performance all season long: www.modeltecct.com

ECCT and AFSW.jpg

Most of All, Have a Safe and Enjoyable Touring Season!

Last post

Not this year, unfortunately. Perhaps next year. we had a wonderful time last time.

5 Replies

2405 Views

Last post by MKossor
Wed May 10, 2023 10:58 pm
FS- Transmission Hub Puller-SOLD

Last post by Dan McEachern « Wed May 10, 2023 10:05 pm
Replies: 2
by Dan McEachern » Wed May 10, 2023 1:49 pm

First post

For Sale- transmission clutch hub puller. New hardened screw. One side bolt has wear, but perfectly functional as is.
$125.00 plus $12.00 USPS priority mail shipping in US. dmcgearsATyahooDOTcom

Hub puller 1.jpg .jpg

Last post

I had two- both are now sold. Thanks Ken and Rich.

2 Replies

851 Views

Last post by Dan McEachern
Wed May 10, 2023 10:05 pm
1915 Brass Horn Tube (SOLD)

Last post by ThreePedalTapDancer « Wed May 10, 2023 4:31 pm

by ThreePedalTapDancer » Wed May 10, 2023 4:31 pm

Older reproduction 1915 brass horn tube, nice condition, no damage will polish up beautiful 80.00 includes shipping lower 48 3464E804-48E6-4F74-9942-D924858681C0.jpeg

0 Replies

584 Views

Last post by ThreePedalTapDancer
Wed May 10, 2023 4:31 pm
Little Hershey Swap Meet & Bob's Sale May 20th 2023

Last post by FATMAN « Wed May 10, 2023 1:03 pm
Replies: 3
by FATMAN » Mon Feb 20, 2023 12:11 pm

First post

Join us at the Little Hershey Swap Meet & Bob's Sale May 20th, 2023.
Enter at gate 3 this year. 6 am. Bob's will have the shop open from 9 am till it slows down, stop by the swap meet then come to Bob's only about 12 miles or so from the meet
7826 Forest Hills Rd
Loves Park, IL
Questions on swap meet contact Dave @ 815-979-4544
Bob's 815-633-7244

Last post

I will have the shop open on that Saturday with some good deals I have 2 rebuilt short blocks for sale 1919 and 1924 bargain 2500.00 each,Bob

3 Replies

1593 Views

Last post by FATMAN
Wed May 10, 2023 1:03 pm
FOR SALE - FORD SPECIAL SPEEDOMETER

Last post by micshotrodgarage « Wed May 10, 2023 11:36 am
Replies: 1
by Jay In Northern Ca. » Tue May 09, 2023 9:48 pm

First post

This unit is in nice looking condition and will need to be restored. The input shaft doesn't move the needle when spun and sticks. The beveled cover glass is in excellent condition. Asking $85 plus postage. SOLD!
Ford Special Standard Speedometer 1.jpg Ford Special Standard Speedometer 2.jpg Ford Special Standard Speedometer 3.jpg
Please use...

Last post

I would be interested in the speedo If still available. Please send me an e mail Thanks. Mike

1 Replies

958 Views

Last post by micshotrodgarage
Wed May 10, 2023 11:36 am
Stan Howe Stromberg OF

Last post by MNToys « Wed May 10, 2023 11:11 am
Replies: 2
by MNToys » Tue May 09, 2023 5:50 pm

First post

This Stromberg OF was rebuilt by Stan Howe and has never been run. Pictures show freshly reconditioned condition. Includes Stan’s book. Asking $650.
Thanks
Nick Rein
PSUNicholas@yahoo.com
551 427 1593
IMG_5167.jpeg

IMG_5168.jpeg

IMG_5169.jpeg

Last post

sold pending payment

2 Replies

1017 Views

Last post by MNToys
Wed May 10, 2023 11:11 am
Compression whistle valve and adapter wanted 1/2 pipe thread size

Last post by Mark Gregush « Wed May 10, 2023 10:20 am
Replies: 1
by Mark Gregush » Tue May 02, 2023 12:47 pm

First post

Looking for just the valve for a sparkplug type compression whistle. Have the whistle and don't need the adapter for my application.
Thanks

Last post

If no one has just the valve, then will consider one with Model T pipe thread adapter.

1 Replies

681 Views

Last post by Mark Gregush
Wed May 10, 2023 10:20 am
WTB gas headlight mounting brackets

Last post by FATMAN « Wed May 10, 2023 9:33 am
Replies: 8
by mklooksup » Sat May 06, 2023 10:05 am

First post

I have a set of brass headlights that need mounting brackets hook type. I have called all the suppliers and none have any at this time. I would take any condition at this point. Thanks manny

Last post

just sent you a e mail, Bob

8 Replies

1646 Views

Last post by FATMAN
Wed May 10, 2023 9:33 am
WTB: Bracket for Carbide Generator

Last post by 1912touring « Tue May 09, 2023 11:55 pm

by 1912touring » Tue May 09, 2023 11:55 pm

Looking for the locking bracket for a carbide generator like the one pictured below. Please PM through the Forum with any leads.

Thank you for your time.

Kind regards,
Michael Hanson

0 Replies

643 Views

Last post by 1912touring
Tue May 09, 2023 11:55 pm
hood shelves 1909 thru 1916

Last post by Melba Nolan « Tue May 09, 2023 11:29 pm
Replies: 1
by Melba Nolan » Wed Apr 19, 2023 10:25 am

First post

for sale: wooden hood shelves $25 plus shipping
20221101_173536.jpg

Last post

shelves sold

1 Replies

745 Views

Last post by Melba Nolan
Tue May 09, 2023 11:29 pm
Haynes rims

Last post by Melba Nolan « Tue May 09, 2023 11:25 pm
Replies: 2
by Melba Nolan » Fri Mar 31, 2023 10:01 am

First post

for sale: 2 haynes rims 30 x 3 good condition with surface rust. $300 plus shipping

email melbanolan@aol.com or text 314-575-7115 for pictures

Last post

haynes rims sold

2 Replies

1078 Views

Last post by Melba Nolan
Tue May 09, 2023 11:25 pm
PRICE LOWERED! - COLLECTION OF EIGHT MINI OIL CANS

Last post by Jay In Northern Ca. « Tue May 09, 2023 9:27 pm

by Jay In Northern Ca. » Tue May 09, 2023 9:27 pm

Here's a set of barn fresh small oil cans from my display shelf. Asking $39 plus postage.
8 Mini Oil Cans.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

0 Replies

739 Views

Last post by Jay In Northern Ca.
Tue May 09, 2023 9:27 pm
Tire Pump SOLD

Last post by aDave « Tue May 09, 2023 9:16 pm
Replies: 3
by aDave » Wed May 03, 2023 9:22 pm

First post

Model T era single brass tube hand operated tire pump. Base is cast iron and is marked Ford. Tube is free of dings, but has obvious wear signs…must have been riding under the seat or in the turtle deck for years. It does compress air, but there is a new air hose, but no nozzle to attach to the tube valve stem – the thingamajig that screws onto the...

Last post

Hi Jim,
I haven't rec'd your PM yet.
I believe the pump has been sold...I am awaiting payment....I will let you know by 5/12.
Dave

3 Replies

1359 Views

Last post by aDave
Tue May 09, 2023 9:16 pm
Luray / Richmond

Last post by RichJ « Tue May 09, 2023 8:00 pm
Replies: 6
by RichJ » Sun Apr 09, 2023 12:54 pm

First post

2 sets 21 inch wheels and hubs
I'm not bring unless someone has intrest

Last post

Also 1912 brass headlights ,cowl and taillights restored steering column show quality Not Cheep!!

6 Replies

2131 Views

Last post by RichJ
Tue May 09, 2023 8:00 pm
counter balance crankshaft

Last post by RichJ « Tue May 09, 2023 7:54 pm
Replies: 3
by RichJ » Sat Apr 08, 2023 3:48 pm

First post

I'll be in Luray in May and Homecoming in June

I have a counterbalanced Shur Mike crankshaft.

I have a set of 21-inch very clean wheels with new 40-plus-year-old tires, also have the hubs.
I am looking for four 30 x 3 1/2 wheels with good tires. Possibly someone wants to swap for my 21-inch wire wheels.
I'll put some posts in the parts...

Last post

Also have overhead valve head with adapter plate .and valve cover,
see it Friday in Luray!

3 Replies

2021 Views

Last post by RichJ
Tue May 09, 2023 7:54 pm
FOR SALE - FACTORY STEERING GEAR BALL ARM

Last post by Jay In Northern Ca. « Tue May 09, 2023 7:32 pm

by Jay In Northern Ca. » Tue May 09, 2023 7:32 pm

This is a good used FORGED Ford factory steering arm unlike the CAST reproductions arms offered by the vendors. You can see from the photos that it's got a full round ball. Asking $45 plus postage.SOLD!
Steering Arm 1.jpg Steering Arm 2.jpg Steering Arm 3.jpg

Please use this email address below and NOT the personal messaging system to contact...

0 Replies

605 Views

Last post by Jay In Northern Ca.
Tue May 09, 2023 7:32 pm
PRICE LOWERED! - PERIOD DASH BOARD PULL CABLE MEASURES 6 FT LONG

Last post by Jay In Northern Ca. « Tue May 09, 2023 7:23 pm

by Jay In Northern Ca. » Tue May 09, 2023 7:23 pm

This will look period correct on your Model T or speedster for actuating a number of different accessory items. Asking $40 plus postage.Sold to Rich.
Dash pull Cable 1.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

0 Replies

659 Views

Last post by Jay In Northern Ca.
Tue May 09, 2023 7:23 pm
WTB .. Looking for a brass dogbone rad cap and working moto-meter

Last post by Allan « Tue May 09, 2023 6:24 pm
Replies: 5
by Bruce Compton » Sun May 07, 2023 12:10 pm

First post

Wanting to buy a brass dog-bone rad cap with a working brass bodied moto-meter for my '14. New, or nice used with patina is fine. Thanks in advance : Bruce

Last post

That's a nice one Frank.

Allan from down under.

5 Replies

1101 Views

Last post by Allan
Tue May 09, 2023 6:24 pm
Emergency brake drum needed

Last post by rls120 « Tue May 09, 2023 5:29 pm
Replies: 2
by rls120 » Sat Apr 29, 2023 7:22 pm

First post

Does anyone have a small (8 ) emergency brake drum they'd be willing to sell?

Thank you

Last post

Thanks, Melba, for sending me a very nice drum at an extremely reasonable price!

2 Replies

854 Views

Last post by rls120
Tue May 09, 2023 5:29 pm
Taillamps fs

Last post by CTLeonard « Tue May 09, 2023 4:13 pm
Replies: 4
by CTLeonard » Tue Jan 17, 2023 9:40 am

First post

Overall good condition. Has a dent in the top and one on the corner. Thumb wheel spins as should. Glass is good. 50.00 plus shipping. ctleonard64@gmail.com IMG_20230117_082543375.jpg IMG_20230117_082554536.jpg IMG_20230117_082607602.jpg IMG_20230117_082616228.jpg

Last post

Back to top

4 Replies

1644 Views

Last post by CTLeonard
Tue May 09, 2023 4:13 pm
Bosch Side Mount Magneto Drive Unit (SOLD)

Last post by ThreePedalTapDancer « Tue May 09, 2023 4:08 pm
Replies: 1
by ThreePedalTapDancer » Tue May 09, 2023 4:07 pm

First post

Here is a hard to find very clean and working original Bosch side drive magneto. It mounts in place of the generator on a late T generator engine block. The Bosch AT4 MAGNETO is hot and puts out a good spark. Very nice condition, some pitting on drive gear, but all teeth intact and it works as it should. 600.00 includes shipping lower 48....

Last post

G IMG_7771.jpeg

1 Replies

650 Views

Last post by ThreePedalTapDancer
Tue May 09, 2023 4:08 pm
Early style front motor mount SOLD

Last post by Layden Butler « Tue May 09, 2023 3:41 pm

by Layden Butler » Tue May 09, 2023 3:41 pm

Early front motor mount with cap, just dirty with very light rust. includes domestic postage.

0 Replies

541 Views

Last post by Layden Butler
Tue May 09, 2023 3:41 pm
FOR SALE: 1914 Fenders, Running boards, and Splash Aprons - Can be seen at Luray

Last post by Jaomlam « Mon May 08, 2023 5:35 am
Replies: 2
by NatalieWeaver » Tue May 02, 2023 11:54 pm

First post

I am helping a family friend find a new home for these items: 1914 front and rear fenders, running boards, and splash aprons. Rootlieb (older), never painted, never mounted to a car. Additional pictures available upon request. I will have these at the Mid-Atlantic Pre-War Swap Meet in Luray, VA. $1,550 OBO.

1.jpg
2.jpg
3.jpg
4.jpg

Last post

I am late

avatar game

2 Replies

965 Views

Last post by Jaomlam
Mon May 08, 2023 5:35 am
Stevens Thread Chaser on TBay

Last post by Allan « Mon May 08, 2023 5:09 am
Replies: 30
by Mark Chaffin » Mon Apr 03, 2023 11:35 am

First post

Not my ad. On TBay now.

Screenshot_20230403_083219_Chrome.jpg

Last post

Nicely don Ken.

Allan from down under.

30 Replies

5771 Views

Last post by Allan
Mon May 08, 2023 5:09 am
Wanted: Rader Distributor Body Only !

Last post by Mark Gregush « Mon May 08, 2023 12:53 am
Replies: 8
by RajoRacer » Fri May 05, 2023 5:19 pm

First post

Any chance of an orphan distributor housing for a Bill Rader distributor hanging on a wall or nail in somebody's garage ??? Friend brought in a rebuilt engine all covered & wrapped as it made a 1000 mile road trip and someone pushed on the front of the engine not knowing what was under the package ! Needless to say, the little arm that grabs the...

Last post

Could you mount a plate with a slot cut at the same arc?

8 Replies

1584 Views

Last post by Mark Gregush
Mon May 08, 2023 12:53 am
FOR SALE - NEW YORK COIL COMPANY MASTER VIBRATOR DASH MOUNT COILBOX

Last post by J1MGOLDEN « Sun May 07, 2023 8:59 pm
Replies: 1
by Jay In Northern Ca. » Sat May 06, 2023 8:29 pm

First post

In good condition for its age. Asking $45 plus postage. SOLD!
New York Coil Company 1.jpg New York Coil Company 2.jpg New York Coil Company 3.jpg New York Coil Company 4.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

Jay, I'll take it.

1 Replies

695 Views

Last post by J1MGOLDEN
Sun May 07, 2023 8:59 pm
WTB: Aftermarket Cast Iron Head

Last post by Schrep771 « Sun May 07, 2023 8:57 pm
Replies: 8
by Schrep771 » Mon May 01, 2023 8:09 pm

First post

Looking to purchase an after market cast iron head, Giant, Haibe, Green engineering, Waukesha-Ricardo, etc.
Any leads appreciated, will be in Luray.
Thanks Steve

Last post

Bump...to the...Top

8 Replies

2480 Views

Last post by Schrep771
Sun May 07, 2023 8:57 pm
Found Lower Windshield late 23 Touring/open car

Last post by Will_Vanderburg « Sun May 07, 2023 12:31 pm
Replies: 12
by RVA23T » Wed May 03, 2023 3:43 pm

First post

23 touring, want the lower Windshield frame at least, with safety glass at best. Kinda would like a good pass/right stanchion with nice square bolt holes where it mounts to the body

Intend on being in Luray next Friday

Last post

I can check and see how good it is and get back to you

12 Replies

1896 Views

Last post by Will_Vanderburg
Sun May 07, 2023 12:31 pm
FS Transmission clutch spring compressor tool

Last post by NealW « Sun May 07, 2023 9:57 am
Replies: 2
by NealW » Sun May 07, 2023 8:05 am

First post

Homemade clutch spring compressor tool shown below. Based on design shown in the MTFCA transmission book. Works well, and am only selling because I have two spring compressor tools.

$30 which includes priority mail shipping. Please contact me using the info shown below. No PM please.

Thanks,

Neal

Last post

SOLD pending payment!

2 Replies

846 Views

Last post by NealW
Sun May 07, 2023 9:57 am
WTB Bauer Fat Man Steering Wheel

Last post by Wayne Sheldon « Sun May 07, 2023 2:53 am
Replies: 1
by Reno Speedster » Sun May 07, 2023 12:07 am

First post

I am interested in a Bauer fat man steering wheel. If you have one you would be willing to part with please send me some pictures and let me know what you would like for it

Last post

Layden Butler did have a couple Bauer steering wheels for sale awhile back. I don't know if he sold them all or not.

His contact information can be found in a recent ad for another part;

1 Replies

584 Views

Last post by Wayne Sheldon
Sun May 07, 2023 2:53 am
FOR SALE - AEROMORE #00 BRASS EXHAUST WHISTLE

Last post by Jay In Northern Ca. « Sat May 06, 2023 9:02 pm

by Jay In Northern Ca. » Sat May 06, 2023 9:02 pm

Whistle measures 18 inches long by 3 x 3 inches. Asking $75 plus postage.
aeromore 1.jpg aeromore 2.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

0 Replies

678 Views

Last post by Jay In Northern Ca.
Sat May 06, 2023 9:02 pm
FOR SALE - FORD SCRIPT CAST BRASS RADIATOR BADGE

Last post by Jay In Northern Ca. « Sat May 06, 2023 6:39 pm

by Jay In Northern Ca. » Sat May 06, 2023 6:39 pm

This is an excellent cast brass radiator badge that is 3D rather then the repro stamped 2D brass sheet badge. Asking $55 plus postage. SOLD!
Ford Script Radiator Badge.jpg
Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

0 Replies

763 Views

Last post by Jay In Northern Ca.
Sat May 06, 2023 6:39 pm
FS used brass hubcaps need repair

Last post by KimDobbins « Sat May 06, 2023 3:53 pm
Replies: 2
by KimDobbins » Sat May 06, 2023 1:52 pm

First post

21 brass hubcaps, all need some type of repair. Some are not bad. $80.00 postpaid in USA. Kdmks AT att.net.

Last post

Sold to Mark

2 Replies

837 Views

Last post by KimDobbins
Sat May 06, 2023 3:53 pm
camshaft

Last post by RichJ « Sat May 06, 2023 10:40 am
Replies: 6
by RichJ » Sat Apr 08, 2023 3:38 pm

First post

I'll be in Luray in May

Last post

Also 1914 block with score in clyinder,
real nice transmission and pan.
Rich 561 262 0393

6 Replies

2311 Views

Last post by RichJ
Sat May 06, 2023 10:40 am
21inch wire wheels and hubs

Last post by RichJ « Sat May 06, 2023 10:35 am
Replies: 4
by RichJ » Sat Apr 08, 2023 3:27 pm

First post

I have a set of 21 inch wire wheels and hubs very good condition very old allstate tires ,
I'd be open to trading for set of 30 x3 1/2 wheels with good tires.
I'll be in Luray.
561 262 0393

Last post

I have second set wheels and hubs. Will consider 30x3 1/2 tires towards the purchase. Will not bring up unless there is interest. Rich 561 262 0393.

I have a block that is someones unfinished project from many years ago It has a datsun pump bolted on it
I'm not able to get to it for about a week,to get pictures. It could be in Luray if...

4 Replies

1945 Views

Last post by RichJ
Sat May 06, 2023 10:35 am
1913 Ford Model T engine and transmission

Last post by BlackTinLizzie « Sat May 06, 2023 9:07 am
Replies: 5
by BlackTinLizzie » Fri Apr 28, 2023 3:08 pm

First post

Late 1913 Model T engine and transmission
This was a running engine from a Jalopy that I no longer have.
Has screw in freeze plugs transmission later low head tea cup oil pan see photos
Free delivery to Luray if paid for.

Last post

Still available

5 Replies

2184 Views

Last post by BlackTinLizzie
Sat May 06, 2023 9:07 am
WTB a block letter 466 badge for a headlight

Last post by JTT3 « Fri May 05, 2023 8:54 pm
Replies: 2
by JTT3 » Wed May 03, 2023 8:08 pm

First post

Looking for a 466 headlamp badge that looks like this! Please let me know if you have one you’d part with. Took the badge off to polish the headlight and I can’t find where I put it. It’s been over a month and I’ve given up. Best John

Last post

Still looking

2 Replies

838 Views

Last post by JTT3
Fri May 05, 2023 8:54 pm
Original Ford Manuals, and parts book

Last post by YellowTRacer « Fri May 05, 2023 6:44 pm
Replies: 2
by YellowTRacer » Fri May 05, 2023 1:58 am

First post

Trying to help an old friend. He has 2 original Model T Ford owners manuals, one has original pencil writings and is from Lindsleys Ford Garage Main St. Santa Rosa, Cal. Also 1 original Model T Ford parts book, and 1 original 1949/50 Ford Radio receiver Service Manual for cars and F Series trucks. The lot for $80.00 plus shipping.

Ed aka #4

Last post

Original Ford Manuals and parts book are sold pending payment.

Ed aka #4

2 Replies

895 Views

Last post by YellowTRacer
Fri May 05, 2023 6:44 pm
FS- New-New Price-Rim Jacks for 21" Split Rims- Ready to Use

Last post by Dan McEachern « Fri May 05, 2023 5:33 pm
Replies: 6
by Dan McEachern » Tue Apr 11, 2023 6:10 pm

First post

I have two rims jacks for sale. If you have 21 split rims on your T, these are a necessary tool to have when changing tires. These are blasted and painted with gloss enamel. $50.00 each plus USPS Priority mail shipping. Please e-mail to dmcgearsATyahooDOTcom if you are interested.
One is the more common screwtype while the red one is a ratchet...

Last post

Great Idea! perhaps I need to get out the old trusty blue to red transformer thingerator.

6 Replies

1427 Views

Last post by Dan McEachern
Fri May 05, 2023 5:33 pm
FOR SALE: Spare tire carrier for 26-27 pick up T Truck

Last post by Jack Putnam, in Ohio « Fri May 05, 2023 1:33 pm
Replies: 7
by Jack Putnam, in Ohio » Tue Apr 12, 2022 6:08 pm

First post

This is a new reproduction spare tire carrier for the 26-27 T pickup truck. Made using the original Ford blue prints. Available now. $600 plus the ride to you. PayPal between friends, check, or pictures of dead presidents if you pick up. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.

Last post

You can mount wire or split rims with this carrier. Split rims require the Y bracket

7 Replies

2980 Views

Last post by Jack Putnam, in Ohio
Fri May 05, 2023 1:33 pm
WTB High Hood for TT 23-25 Rusty Preferred

Last post by FordFool « Fri May 05, 2023 1:32 pm
Replies: 1
by SurfCityGene » Thu May 04, 2023 12:06 am

First post

Long Beach T club needs a TT High Hood in ANY condition to complete the TT restoration for the Long Pine Train Museum project!
Mostly from donations we have restored this TT Truck found rusty and sitting near the Lone Pine California Train Museum. Club members worked to free up all the mechanicals and rebuilt an engine and replaced the wheels and...

Last post

The club is looking for a 23-25 high hood not a 26-27 passenger car hood. It’s for a TT.

1 Replies

734 Views

Last post by FordFool
Fri May 05, 2023 1:32 pm
FS set of 5 brass hubcaps

Last post by KimDobbins « Fri May 05, 2023 1:04 pm
Replies: 5
by KimDobbins » Thu May 04, 2023 6:13 pm

First post

Set of five brass reproduction hubcaps. These are in nice condition, heavier than the originals. $75.00 plus postage. kdmks AT att.net.

Last post

Hubcaps are sold.

5 Replies

1313 Views

Last post by KimDobbins
Fri May 05, 2023 1:04 pm
FS Bear wheel alignment tool

Last post by KimDobbins « Fri May 05, 2023 1:04 pm
Replies: 8
by KimDobbins » Thu May 04, 2023 10:13 pm

First post

For sale is a Bear brand wheel alignment tool. Adjustable and spring loaded, it can be used on a variety of cars. $200.00 plus shipping. Kdmks AT att.net.

Last post

Sold to Ken.

8 Replies

1554 Views

Last post by KimDobbins
Fri May 05, 2023 1:04 pm
Friction Shocks for sale

Last post by Unprr « Fri May 05, 2023 10:28 am

by Unprr » Fri May 05, 2023 10:28 am

I have a pair of friction shocks, purchased from Speedway Motors. I tried to mount them on my Model T
But failed to find a proper location for them. ( I’m not a welder) .
I’m asking $80 OBO plus shipping.

0 Replies

760 Views

Last post by Unprr
Fri May 05, 2023 10:28 am
Model T engine and parts

Last post by TWrenn « Fri May 05, 2023 9:57 am
Replies: 1
by mainengine » Thu May 04, 2023 1:46 pm

First post

My dad started collecting and restoring cars in the fifties. Over the years he parted out a lot of model Ts and I ended up with what was left of T parts. I have couple of engines and transmissions, 1917-1923hood, sheetmetal and brackets for roadster seat,
two or three steering columns, quite a few windsheild posts, headlight brackets, running...

Last post

Can at least see that the lower engine is a '17 casting date anyway.

1 Replies

1045 Views

Last post by TWrenn
Fri May 05, 2023 9:57 am
FS battery/ electric horns

Last post by KimDobbins « Fri May 05, 2023 1:44 am
Replies: 9
by KimDobbins » Sat Apr 22, 2023 4:03 pm

First post

All 3 horns work, $100 each. Plus shipping. Kdmks AT att.net.

Last post

Horns are sold

9 Replies

1958 Views

Last post by KimDobbins
Fri May 05, 2023 1:44 am
Lot of Model T Times magazines from the MTFCI 1964 - 1976

Last post by stevechallotte « Fri May 05, 2023 12:47 am
Replies: 4
by VinTin23 » Wed May 03, 2023 9:37 am

First post

For Sale: A lot of Model T Times magazines from the Model T Ford Club International. These are some of the early issues.
All magazines are in Good-Excellent Condition from non-smokers home. It’s just fascinating to see this snapshot in time of how the hobby has progressed.

These are priced to sell, $30.00 Shipped in Lower 48 Continental States....

Last post

Ohh no!!! I love these magazines but I come too late.

cubes 2048

4 Replies

1148 Views

Last post by stevechallotte
Fri May 05, 2023 12:47 am
Adjustable Drill Holder - Lathe

Last post by fbergski « Thu May 04, 2023 11:00 pm
Replies: 2
by fbergski » Thu May 04, 2023 8:10 pm

First post

I know this isn't a t part but I do know there are a few of us that are machinists, up for sale is a Somma Tool adjustable drill holder with a 3/4 shank, brand new never used. This is used when your lathe turret is off center. New these are pricey so I'll let it go for $75 plus shipping via USPS priority mail service standard rate.

Thanks

3131...

Last post

Email received, I'll contact you tomorrow.

2 Replies

1183 Views

Last post by fbergski
Thu May 04, 2023 11:00 pm
Trade: Model T Exhaust Header Plate

Last post by speedytinc « Thu May 04, 2023 6:48 pm
Replies: 1
by ModelTWoods » Thu May 04, 2023 6:18 pm

First post

Looking To Trade, one Model T Exhaust Header Plate. This is what you'd start with if you were making your own set of Speedster Headers. Looking to trade for similar plate that is used to mate a Model A or B intake and exhaust manifold to a T block.The T to A adapter plate is presently available from most T vendors. Although it used to be...

Last post

It is not necessary to use an adapter plate to fit an A or B manifold set.
Its a straight bolt on with minor modification to some of the manifold stud reliefs.

1 Replies

732 Views

Last post by speedytinc
Thu May 04, 2023 6:48 pm
FOR SALE Fairbanks Hand Crank Coil Tester

Last post by J1MGOLDEN « Thu May 04, 2023 3:17 pm
Replies: 2
by J1MGOLDEN » Mon May 01, 2023 4:07 pm

First post

A Fairbanks Hand Crank Coil Tester completely restored with all parts bead blasted and painted. The HCCT parts are painted the correct Ford green, a remanufactured meter and new inductor is painted black (like the original), a Magneto coil ring is red and the flywheel is silver. The bronze spark ring is correct and the flywheel magnets are fully...

Last post

The HCCT has been sold.

Thanks for looking!

2 Replies

983 Views

Last post by J1MGOLDEN
Thu May 04, 2023 3:17 pm
Battery box.

Last post by CudaMan « Thu May 04, 2023 11:23 am
Replies: 4
by Dollisdad » Mon May 01, 2023 3:01 pm

First post

Looking for a battery box

Last post

Oh, you need the chassis bracket that the box fits into! That's different. :)

That one is incomplete, it is missing the bottom strap that the battery box sits on.

If someone else doesn't step up with one, contact Bob Bergstadt (modelt2001 on ebay) or Mark Freimiller (modelt96 on ebay). Send them your picture so that they know exactly what you...

4 Replies

1324 Views

Last post by CudaMan
Thu May 04, 2023 11:23 am
Wanted: Hub Flanges for 20" TT Wheels

Last post by RajoRacer « Thu May 04, 2023 10:37 am
Replies: 2
by RajoRacer » Wed May 03, 2023 5:11 pm

First post

Anyone have a decent pair of hub flanges available ?

Last post

Found a pair - thanks Steven & MTFCA !

2 Replies

813 Views

Last post by RajoRacer
Thu May 04, 2023 10:37 am
SOLD: Great NOS Brass Era-1920s "STOP" Brake Light Assembly

Last post by GGZ « Thu May 04, 2023 10:09 am
Replies: 10
by GGZ » Sat Jan 28, 2023 2:20 pm

First post

SOLD 5/10/23

Here is a great NOS, all original, STOP brake light assembly. It is in original with excellent paint and has never been used or mounted. Excellent lens, plated rim, mounted bracket, etc. It measures 4 1/4 diameter by 2 1/2 in depth. A really nice piece and a desirable accessory.

Price is 195.00 includes FedEx shipping and insurance...

Last post

SOLD 5/ 10 / 23

10 Replies

3359 Views

Last post by GGZ
Thu May 04, 2023 10:09 am
Fordson tooling FS ??

Last post by Dan Hatch « Thu May 04, 2023 4:18 am
Replies: 1
by Dan Hatch » Sun Apr 30, 2023 4:52 pm

First post

Is anyone here interested in a Fordson Hempy Cooper main bearing boring bar, a Universal Fordson pouring bar and a Fordson mag setting gage? Surplus to my shop. Can bring to Luray or Homecoming. Will send pictures to anyone interested. Email me at address in pictures. Thanks Dan
IMG_0260.jpeg

Last post

Back to the top

1 Replies

756 Views

Last post by Dan Hatch
Thu May 04, 2023 4:18 am
1914 complete engine

Last post by TRZim « Thu May 04, 2023 12:18 am
Replies: 3
by TRZim » Thu Feb 23, 2023 2:45 pm

First post

Selling my extra 1914 engine, it's complete ready to bolt into your car.
Asking $5,000.00. You pick up.

Last post

New price $4,000. Located in Upland Ca. On engine stand if local you can take a look. Aluminum pistons 60 over, was rebuilt by local engine guy 20 years ago. Has always run great. It has completed many tours engine has always run great.

3 Replies

1997 Views

Last post by TRZim
Thu May 04, 2023 12:18 am
Wanted…..Running boards 27 Tudor

Last post by Flyingpiper59 « Wed May 03, 2023 11:01 pm

by Flyingpiper59 » Wed May 03, 2023 11:01 pm

Looking for right side RB…..rusted through from having a battery sitting on it since 54…
If someone has a pair and they don’t want to split them up, I’ll take them both, thanks in advance
Ed 585-808-3311

0 Replies

533 Views

Last post by Flyingpiper59
Wed May 03, 2023 11:01 pm
fan pulley with ball bearing 1922

Last post by Rich Huggins « Wed May 03, 2023 9:41 pm

by Rich Huggins » Wed May 03, 2023 9:41 pm

WTB Looking for fan fan pulley with ball bearings inserts made by fun producets that replaces brass bushing still listed by parts venders for 47.00 but back orderd Rich Huggins 520-827-0295

0 Replies

577 Views

Last post by Rich Huggins
Wed May 03, 2023 9:41 pm
WTB Early 20's Roadster Gas Tank Metal Cover Panel

Last post by Howard Tomlinson « Wed May 03, 2023 9:18 pm

by Howard Tomlinson » Wed May 03, 2023 9:18 pm

Hello Everyone,

I have a early 1920's Roadster and need the metal panel that covers the gas tank (under the bottom seat springs). I'd like to find an original. Some patina is OK.

I'll be vending at Luray next week if you are coming that way.

Thanks,
Howard Tomlinson

0 Replies

555 Views

Last post by Howard Tomlinson
Wed May 03, 2023 9:18 pm
WTB:1919-1925 Hogshead

Last post by Mark Gregush « Wed May 03, 2023 3:25 pm
Replies: 7
by Jacob Mangold » Mon May 01, 2023 5:53 pm

First post

I would like to find a 1919-1925 starter Hogshead in decent, usable condition for my 1924 TT. I would prefer to find someone close to me so shipping is not an issue but I won’t be too picky.

Thanks in advance, Jacob Mangold

Last post

Check with Bob;

You can also try using the Quick Links and do a member search by state, which could include close by states. There are 20 members showing their location as Nevada.
Silver State Model T Ford Club
c/o Dick Markley
Gardnerville, NV 89410-5610

Southern Nevada Model T Club
c/o Tom Collins
Henderson, NV 89015-4773

7 Replies

1306 Views

Last post by Mark Gregush
Wed May 03, 2023 3:25 pm
WTB set of rear radius rods for 1925

Last post by havnfun « Wed May 03, 2023 10:26 am
Replies: 3
by kgibbo » Tue May 02, 2023 7:08 pm

First post

Wanted: used set of rear radius rods for 1925 - in useable condition. Thanks in advance!

Last post

I’ll dig some out this afternoon and send you pictures

3 Replies

842 Views

Last post by havnfun
Wed May 03, 2023 10:26 am
1927 Model T Coupe Body and parts.

Last post by BobP « Wed May 03, 2023 7:31 am
Replies: 7
by BobP » Tue Apr 25, 2023 7:11 pm

First post

No one seems to want the whole thing so we will try to part it. 1927 coupe body in good condition. doors open and shut very good. Body includes trunk lid and doors and body and garnish. $2200. Set of 4 fenders in very good shape, $1,000. Chassis with complete running gear, engine turns, steering column, 5 wire wheels in very good shape and a good...

Last post

Chassis and wheels and fenders are sold pending payment, Thanks MTFCA, Bob.

7 Replies

1771 Views

Last post by BobP
Wed May 03, 2023 7:31 am
Various parts. 26-27 fenders, DB front axle, etc

Last post by Craig E. Luton « Tue May 02, 2023 11:56 pm
Replies: 2
by DylanWills » Sun Mar 19, 2023 6:07 pm

First post

Hello guys,

I got some parts I'd like to move on. Got the usual hoarding parts, axle housings, high heads, later blocks. Also have a decent pair of 26-27 front fenders and one rear. Have a single DB front axle I'd let out of the hoard too. I prefer local pickup in Lake Stevens, WA. I can get pictures and get shipping quotes if there's something...

Last post

sent an e-mail 5/02/2023
Craig

2 Replies

1137 Views

Last post by Craig E. Luton
Tue May 02, 2023 11:56 pm
WTB - Nickel Headlight Rings

Last post by 208ModelT « Tue May 02, 2023 10:45 pm

by 208ModelT » Tue May 02, 2023 10:45 pm

Good evening Model T friends. I am in Meridian Idaho looking for Nickel Headlight rings for my 1926 Model T Tudor.

0 Replies

515 Views

Last post by 208ModelT
Tue May 02, 2023 10:45 pm
Wtb '23 touring door handle

Last post by Steve Bender « Tue May 02, 2023 10:08 pm
Replies: 9
by Steve Bender » Tue Apr 25, 2023 8:07 am

First post

I need a door handle for 1923 touring right front passenger side. Mine broke makes it hard to get in and out. But it does now have a General Lee feel to it! 8-)

Last post

I am interested.

9 Replies

1513 Views

Last post by Steve Bender
Tue May 02, 2023 10:08 pm
NEW LOWER PRICE! -ULCO FORD HEADLIGHT EQUALIZER FOR MODEL T'S WITH MAGNETO HEADLIGHTS NOS IN THE ORIGINAL BOX

Last post by Jay In Northern Ca. « Tue May 02, 2023 3:42 pm
Replies: 1
by Jay In Northern Ca. » Tue Mar 21, 2023 8:19 pm

First post

This is a over hundred year old Model T accessory new in the original box. Measures 4 x2 x2 . Asking $40 plus postage.
equalizer 1.jpg equalizer 2.jpg equalizer 3.jpg equalizer 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Last post

NEW LOWER PRICE!

1 Replies

848 Views

Last post by Jay In Northern Ca.
Tue May 02, 2023 3:42 pm
NEW LOWERED PRICE - CONTINENTAL HOT AIR STOVE FOR YOUR CARBURETOR

Last post by Jay In Northern Ca. « Tue May 02, 2023 3:36 pm
Replies: 2
by Jay In Northern Ca. » Fri Apr 21, 2023 5:53 pm

First post

This cast Aluninium accessory bolts up onto your exhaust manifold and passes air coming thru the radiator into contact with the hot exhaust manifold on the way to the carburetor intake. you will need to provide a length of flex-tube between it and the carb intake when installing it. Asking $45 plus postage.

CONTINENTAL HOT AIR STOVE 1.jpg...

Last post

NEW LOWERED PRICE!

2 Replies

854 Views

Last post by Jay In Northern Ca.
Tue May 02, 2023 3:36 pm
NEW LOWERED PRICE! - PAIR OF WOOD CASED KRW GENERATOR BENCH TEST METER & HOYT BENCH MAGNETO TEST METER

Last post by Jay In Northern Ca. « Tue May 02, 2023 3:31 pm
Replies: 1
by Jay In Northern Ca. » Sat Apr 29, 2023 7:19 pm

First post

This is a nice pair of original Model T period repair shop meters. Asking $90 for the pair plus postage.SPOKEN FOR!
Hoyt meter1.jpg Hoyt meter 2.jpg KRW Test Meter 1.jpg KRW Test Meter 2.jpg

Please use this email address below and NOT the personal messaging system to contact me.
email.jpg

Last post

New Lower Price!

1 Replies

783 Views

Last post by Jay In Northern Ca.
Tue May 02, 2023 3:31 pm
FS early assorted parts

Last post by KimDobbins « Tue May 02, 2023 3:21 pm
Replies: 6
by KimDobbins » Sun Apr 30, 2023 9:02 pm

First post

1912 oil filler timer and cover, both pieces are NOS. $700.00. 2 original Ford Babbitt drive shaft bearings. $30 each. 1912 hand crank , $200,00. 2 pair of brass lamp burners, $75.00 each. 1912 torpedo gas tank sediment bulb $225.00. 1917-19 combo headlight switch horn button NOS, $85.00. All plus shipping. kdmks AT att.net.

Last post

Headlight/horn switch, 1912 timer and cover and 1912 hand crank are sold.

6 Replies

1878 Views

Last post by KimDobbins
Tue May 02, 2023 3:21 pm

New Topic

9300 topics

Page 72 of 93
- Jump to page:
Previous
1
…
70
71
72
73
74
…
93
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum