Classifieds - Parts - Page 86

Classifieds - Parts

New Topic

9701 topics

Page 86 of 98
- Jump to page:
Previous
1
…
84
85
86
87
88
…
98
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

81388 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Rebuilt NH Carb (C1) SOLD

Last post by rickd « Fri Feb 10, 2023 10:50 am
Replies: 6
by rickd » Wed Feb 08, 2023 3:07 pm

First post

I am going to be posting 6 rebuilt NH carbs. All of the carbs have been professionally rebuilt by the carb guys that sell on this site. No core needed. $140.00 includes usps flate rate shipping. Check or money order. Email me through this site. C1.jpg C11.jpg C12.jpg

Last post

Robert bought the swivel top carb. Thank you. This carb is still for sale.

6 Replies

1655 Views

Last post by rickd
Fri Feb 10, 2023 10:50 am
Late 1925 Transmission Brake Drum FS

Last post by rickd « Fri Feb 10, 2023 10:25 am

by rickd » Fri Feb 10, 2023 10:25 am

Late 1925 transitional brake drum set up to use 26-7 lug shoes. $275.00+$25.00 UPS shipping. Check or money order. Email me through this site. T2.jpg T4.jpg T1.jpg T3.jpg

0 Replies

664 Views

Last post by rickd
Fri Feb 10, 2023 10:25 am
WTB: Title for Roadster, 1922-1925

Last post by FATMAN « Fri Feb 10, 2023 9:48 am
Replies: 7
by jmichaelmetz » Wed Feb 08, 2023 6:42 pm

First post

Need title for a T Roadster 1922-25....Have 1962 bill of sale that Dad got when he purchased, but no serial number and now Dad and seller are deceased. Texas won't accept bill of sale without engine number or serial number even for a bonded title application. Thanks, John

Last post

Did you find a title yet? Bob
if so e m me

7 Replies

1932 Views

Last post by FATMAN
Fri Feb 10, 2023 9:48 am
26/27 Steering column brackets SOLD

Last post by Jeepbone1 « Thu Feb 09, 2023 9:22 pm
Replies: 1
by Jeepbone1 » Thu Feb 09, 2023 10:57 am

First post

As title states. $45 plus the ride. Call or text me anytime. 54zero-761-2three03.

Brad

Last post

SOLD

Brad

1 Replies

952 Views

Last post by Jeepbone1
Thu Feb 09, 2023 9:22 pm
WTB side curtains for 26 touring

Last post by colonelpowers « Thu Feb 09, 2023 8:08 pm
Replies: 1
by colonelpowers » Sun Dec 18, 2022 12:10 am

First post

Hello,
I posted this a while back and thought that I would try again. I am looking for a usable set of side curtains for my 26 touring. The old car is unrestored and a little bit ugly so I just need something that will keep the snow and rain out, they don't have to be perfect. If anybody has anything laying around, please let me know.

Thanks and...

Last post

I just thought I would try again to see if anyone has any usable side curtains for a 26 touring. They don't need to be nice just something to keep a little wind out.

1 Replies

803 Views

Last post by colonelpowers
Thu Feb 09, 2023 8:08 pm
WTB Lugnut! Firestone? Bought!

Last post by Layden Butler « Thu Feb 09, 2023 7:04 pm
Replies: 4
by Brian D » Mon Feb 06, 2023 1:39 pm

First post

Looking for a lugnut for another Model T owner. Has just one missing.
Please let me know if you have one you'll part with.
Brian
586 864 5110

Last post

Stone was a manufacturer of aftermarket rim and wheel parts. On small parts they abbreviated their mark to TN.

4 Replies

1514 Views

Last post by Layden Butler
Thu Feb 09, 2023 7:04 pm
WTB - 1926 Steering Column

Last post by CatGuy « Thu Feb 09, 2023 3:04 pm
Replies: 3
by CatGuy » Tue Jan 10, 2023 9:37 am

First post

I'm looking for a steering column for a '26.

Last post

I have one now. Thanks.

3 Replies

1413 Views

Last post by CatGuy
Thu Feb 09, 2023 3:04 pm
Heinz coil boxes FS

Last post by Jeepbone1 « Thu Feb 09, 2023 10:48 am

by Jeepbone1 » Thu Feb 09, 2023 10:48 am

Nice Heinz coil boxes for sale. Make offer on each. Call me anytime at 54zero-761-23zero3.

Brad

0 Replies

827 Views

Last post by Jeepbone1
Thu Feb 09, 2023 10:48 am
Rebuilt NH Carb (C4) side drain SOLD

Last post by SoNorCal « Wed Feb 08, 2023 11:08 pm
Replies: 1
by rickd » Wed Feb 08, 2023 3:57 pm

First post

I am posting 6 rebuilt NH carbs. All of the carbs have been professionally rebuilt by carb guys that sell on this site. No core needed. $140.00 includes usps flat rate shipping. Check or money order. Email me through this site. C4.jpg C41.jpg C42.jpg

Last post

PM sent. NH carbs are one of those things you always need another of lest you regret it

1 Replies

856 Views

Last post by SoNorCal
Wed Feb 08, 2023 11:08 pm
For Sale: 1914 Nonpareil Horn

Last post by SoNorCal « Wed Feb 08, 2023 11:04 pm
Replies: 4
by Ed Fuller » Fri Jan 27, 2023 4:42 pm

First post

Nice 1914 Nonpareil brass horn. Has several normal small dings but no major dents. The rim is mangled and cracked in one place. $150 plus shipping in the U.S.

3A6A9343-8A84-42C8-B01E-658141F568BB.jpeg

E2F9DDD7-74EC-4028-82B6-0992B2BD3E3D.jpeg

A683227C-EE28-4071-AF58-BE626FE30A02.jpeg

26D46450-0E65-46F5-844A-D1C998FC473D.jpeg

Last post

Pm sent to Ed. Horn needs a home, I have one - win win

4 Replies

1513 Views

Last post by SoNorCal
Wed Feb 08, 2023 11:04 pm
For Sale: 1915 Brass Holley G Carburetor

Last post by Ed Fuller « Wed Feb 08, 2023 4:43 pm
Replies: 3
by Ed Fuller » Fri Jan 27, 2023 5:25 pm

First post

This carburetor came from an estate collection of T parts so I have no knowledge of its condition. From what I can tell I think it’s a 1915 style. Has the December 1914 date on the cover plate. The throttle shaft is pretty loose in the bore in the body. The body could stand to have a bushing installed. Otherwise looks pretty complete.

$100 plus...

Last post

Price drop. $65 plus shipping in the U.S.

3 Replies

1084 Views

Last post by Ed Fuller
Wed Feb 08, 2023 4:43 pm
Rebuilt NH Carb (C5) swivel top SOLD

Last post by rickd « Wed Feb 08, 2023 4:11 pm

by rickd » Wed Feb 08, 2023 4:11 pm

I am posting 6 rebuilt NH carbs. All of the carbs have been professionally rebuilt by carb guys that sell on this site. No core needed. $140.00 includes usps flat rate shipping. Check or money order. Email me through this site. C5.jpg C51.jpg C52.jpg

0 Replies

614 Views

Last post by rickd
Wed Feb 08, 2023 4:11 pm
FS Running Board Tool Box SOLD

Last post by South park zephyr « Wed Feb 08, 2023 4:02 pm
Replies: 7
by TRDxB2 » Wed Jan 25, 2023 1:41 pm

First post

Nice running board tool box 22 long 9-1/4 wide and 6-3/4 high no key $85 plus shipping (or pickup)
Prefer PayPal to Friends/Family to my email address, checks or cash accepted

Last post

The tool box arrived today,
You did a great job packaging
Thank you,
Scott

7 Replies

2128 Views

Last post by South park zephyr
Wed Feb 08, 2023 4:02 pm
Rebuilt NH Carb (C3) Sold

Last post by havnfun « Wed Feb 08, 2023 3:53 pm
Replies: 1
by rickd » Wed Feb 08, 2023 3:31 pm

First post

I am posting 6 rebuilt NH carbs. All of the carbs have been professionally rebuilt by the carb guys that sell on this site. No core needed. $140.00 incudes usps flat rate shipping. Check or money order. Email me through this site. C3.jpg C31.jpg C32.jpg

Last post

Sent you an email

1 Replies

717 Views

Last post by havnfun
Wed Feb 08, 2023 3:53 pm
1915 machined hub

Last post by got10carz « Wed Feb 08, 2023 3:20 pm
Replies: 6
by Mike Royster » Tue Feb 07, 2023 1:47 pm

First post

I am looking to buy a machined hub for my 15 T so that I use the speedometer that came on the car, and the car has unknown wire wheels. Attached are the pictures of the hub I need. Thanks much!

Mike Royster
mr@carolina.rr.com
704-418-1177 hub2.jpg

Last post

Most are probably roller bearing. All have short hub cap shoulder.All for sale $75 each

6 Replies

1852 Views

Last post by got10carz
Wed Feb 08, 2023 3:20 pm
Rebuilt NH carb (C2) Sold

Last post by rickd « Wed Feb 08, 2023 3:11 pm

by rickd » Wed Feb 08, 2023 3:11 pm

I am going to be posting 6 rebuilt NH carbs. All of the carbs have been professionally rebuilt by the carb guys that sell on this site. No core needed. $140.00 includes usps flat rate shipping. Check or money order. Email me through this site. C2.jpg C21.jpg C22.jpg

0 Replies

595 Views

Last post by rickd
Wed Feb 08, 2023 3:11 pm
TW timer rotor-round brush

Last post by TWrenn « Wed Feb 08, 2023 2:38 pm

by TWrenn » Wed Feb 08, 2023 2:38 pm

Okay fellow T'ers....for my next act to follow up the custom-made round brushes, I'd I have found a local source to make the rotor (CNC) for me. However, to get the best price he is suggesting a quantity of 20, which would run something like $36.50 which isn't too bad, compared to $170 for just ONE! So I'm putting it out there to see if anyone may...

0 Replies

601 Views

Last post by TWrenn
Wed Feb 08, 2023 2:38 pm
Original ammeter price reduction

Last post by Larry LaPatka « Wed Feb 08, 2023 1:54 pm

by Larry LaPatka » Wed Feb 08, 2023 1:54 pm

Ammeter original great condition
$38.00 plus postage
Thank You MTFCA
Email: ltlapatka@gmail.com
Text: 423.237.8846

0 Replies

796 Views

Last post by Larry LaPatka
Wed Feb 08, 2023 1:54 pm
Parts for sale

Last post by KimDobbins « Wed Feb 08, 2023 12:15 pm
Replies: 9
by KimDobbins » Tue Feb 07, 2023 5:30 pm

First post

Tapered leaf front spring, $200.00. E and J brass generator top tank, $225.00. 1915 horn, $100.00. Jones speedometer, cable and drive. 2. 50 to 1 ratio, right hand drive. $800.00. Exhaust whistle, $75.00. Valve cover doors, .065 thick, $40.00 pair, .040 thick, $10.00 pair. All plus shipping. Kdmks AT att.net.

Last post

Sorry Fred, I don't have and tool boxes.

9 Replies

2504 Views

Last post by KimDobbins
Wed Feb 08, 2023 12:15 pm
2nd pitman arm pending sold

Last post by Melba Nolan « Wed Feb 08, 2023 9:45 am
Replies: 1
by Melba Nolan » Wed Feb 08, 2023 9:31 am

First post

for sale: appears to be in new condition. has ford script. $30 plus $10 for postage
20230207_150520.jpg 20230207_150534.jpg 20230207_150556.jpg 20230207_150611.jpg

Last post

sold pending payment

1 Replies

692 Views

Last post by Melba Nolan
Wed Feb 08, 2023 9:45 am
Spiral wound rear axle roller bearings F/S

Last post by MarkS « Wed Feb 08, 2023 1:11 am
Replies: 7
by Layden Butler » Sun May 01, 2022 4:41 pm

First post

USED rear car axle spiral wound roller bearings part # 2508, these are for both inner and outer and left and right side, lightly used very good condition and measure .002 wear or less on the rollers, no loose cages, limited number available, most have no makers markings but some say Hyatt and a few Ford, all are the original style spiral wound...

Last post

Email sent

7 Replies

3014 Views

Last post by MarkS
Wed Feb 08, 2023 1:11 am
1914 Narrow Neck Pan (straitened)

Last post by frontyboy « Tue Feb 07, 2023 10:52 pm
Replies: 2
by frontyboy » Sat Jan 28, 2023 11:51 pm

First post

Excellent narrow neck pan just professionally straightened and ready to be installed. I had it restored and straightened and then decided to change to a 4 dip for access to the forth rod. Can send photos of inside and out.

$250 plus shipping expenses, can possibly get it to Tulare for the swap meet.

frontyboy

2ho69191949(Text)

Last post

back to the top

frontyboy

2 Replies

1233 Views

Last post by frontyboy
Tue Feb 07, 2023 10:52 pm
FS Modern Roller Bearing Thrust washer SOLD

Last post by TRDxB2 « Tue Feb 07, 2023 9:38 pm
Replies: 1
by TRDxB2 » Tue Feb 07, 2023 8:19 pm

First post

NOS Modern Roller Bearing Thrust washer assembly for sale. $40 + shipping Prefer PayPal to Friends & Family, Cash & Check okay

Last post

Sale pending

1 Replies

643 Views

Last post by TRDxB2
Tue Feb 07, 2023 9:38 pm
Early brass carb bowl and float mechanism F/S

Last post by Layden Butler « Tue Feb 07, 2023 6:16 pm

by Layden Butler » Tue Feb 07, 2023 6:16 pm

$75, domestic postage $10.

0 Replies

644 Views

Last post by Layden Butler
Tue Feb 07, 2023 6:16 pm
Brass Victor carbide generator F/S

Last post by Layden Butler « Tue Feb 07, 2023 4:37 pm
Replies: 2
by Layden Butler » Thu Sep 22, 2022 5:38 pm

First post

Really decent complete Victor brand brass carbide generator, can send set of pictures, can ship nationwide, happy to answer any questions, not perfect but only very minor issues, use as is on your barn find or restore.

Last post

New price $635 plus the ride.

2 Replies

1417 Views

Last post by Layden Butler
Tue Feb 07, 2023 4:37 pm
All brass E&J tail lamp F/S

Last post by Layden Butler « Tue Feb 07, 2023 4:34 pm
Replies: 4
by Layden Butler » Tue Dec 13, 2022 2:08 pm

First post

All brass 1908 tail lamp, $125 domestic shipping $20.

Last post

$99 including domestic shipping.

4 Replies

1696 Views

Last post by Layden Butler
Tue Feb 07, 2023 4:34 pm
Prest-O-Lite regulator F/S new price

Last post by Layden Butler « Tue Feb 07, 2023 4:30 pm
Replies: 2
by Layden Butler » Sun Jan 15, 2023 5:47 pm

First post

Gas regulator for use on a tank for supplying gas to headlamps, great for putting under the seat or on the running board as a cleaner source for gas than a generator.

Last post

To the top with new price.

2 Replies

968 Views

Last post by Layden Butler
Tue Feb 07, 2023 4:30 pm
1926-7 Spare rim carrier nut NOS F/S

Last post by Layden Butler « Tue Feb 07, 2023 4:26 pm
Replies: 1
by Layden Butler » Sun Jan 15, 2023 7:25 pm

First post

New Old Stock special nut with ears for padlock, this holds the spare wood wheel rim with tire to the carrier on 1926 1927 cars, Ford part number 2876. $25 each limited number available, domestic postage $10.

Last post

Back to the top!

1 Replies

938 Views

Last post by Layden Butler
Tue Feb 07, 2023 4:26 pm
FS headlight forks

Last post by T Cruiser « Tue Feb 07, 2023 1:54 pm
Replies: 4
by T Cruiser » Sat Feb 04, 2023 5:51 pm

First post

These are the 11-14 style. They appear to be old high quality repo's.They are a lot better than the last batch all the dealers had that needed to be fitted. $85.00 plus $17.10 shipping in the cont. US. Ted. 503-728-3476

Last post

They were sold Sunday AM. I tried to post that they were sold ,but it must have not been printed. Sorry for any inconvience. Ted

4 Replies

1525 Views

Last post by T Cruiser
Tue Feb 07, 2023 1:54 pm
WTB: Hood Panels

Last post by dinosbunny « Tue Feb 07, 2023 1:17 pm
Replies: 1
by RonGlowczewski » Tue Feb 07, 2023 3:41 am

First post

I am looking for the top hood panels for a 1925 Roadster. I already have the lower louvered sections. See picture for measurements.
38165.jpg

Last post

Hi Ron sent you a pm

1 Replies

706 Views

Last post by dinosbunny
Tue Feb 07, 2023 1:17 pm
Wtb new ovel speedster gas tank

Last post by Model T Tom « Tue Feb 07, 2023 12:06 pm

by Model T Tom » Tue Feb 07, 2023 12:06 pm

Looking for a friend for his project
Tom Butterworth
772-475-9142

0 Replies

680 Views

Last post by Model T Tom
Tue Feb 07, 2023 12:06 pm
WTB: Carburetor Linkage.

Last post by TRDxB2 « Tue Feb 07, 2023 11:28 am
Replies: 1
by RonGlowczewski » Tue Feb 07, 2023 3:37 am

First post

I am looking for the later style carburetor priming/adjusting rod assembly for a NH carburetor. See picture.
794801.jpg

Last post

I have a couple 4129B (langs #) need to measure their lengths. I'll send pictures to your email address later. We met via eBay shipping errors

1 Replies

671 Views

Last post by TRDxB2
Tue Feb 07, 2023 11:28 am
NOS Triple Gear Set & Driven Gear SOLD

Last post by Stephen1915 « Tue Feb 07, 2023 11:04 am
Replies: 2
by Stephen1915 » Sun Feb 05, 2023 9:43 pm

First post

Set of three FORD Triple gears. Guaranteed NOS. $300
Single FORD NOS driven Gear $75

Contact for photos.

314-287-1901

stephensmail2001@gmail.com

Last post

Sold to Dan

2 Replies

1240 Views

Last post by Stephen1915
Tue Feb 07, 2023 11:04 am
Scat Connecting rods and main bearing caps

Last post by Jeepbone1 « Tue Feb 07, 2023 7:41 am
Replies: 1
by frontyboy » Tue Feb 07, 2023 1:36 am

First post

Scat rods new with insert bearings. Also heavy duty new main bearing caps. These are left over from a speedster build. Never even opened the Scat shipping box. All above for $500.00 plus shipping.

frontyboy text 2h06-919-1949) Or call.

Last post

Just called and left a voicemail.

Brad

1 Replies

945 Views

Last post by Jeepbone1
Tue Feb 07, 2023 7:41 am
For Sale: New Stromberg OF parts

Last post by BUSHMIKE « Tue Feb 07, 2023 7:18 am
Replies: 1
by Scott_Conger » Mon Feb 06, 2023 2:51 pm

First post

I have a very limited supply of the following in stock and available right now

I do not wholesale parts or sell other people's parts as my own, nor do I make parts to order. When I need a part, I make extras, and that's what these are. These are reproduced in my shop, by me, to the highest degree of accuracy possible.
I cannot ship fabricated...

Last post

As a long time machinist with a pretty critical eye, I can say that these are some very nice looking parts! I wish I had an OF to utilize them.

1 Replies

803 Views

Last post by BUSHMIKE
Tue Feb 07, 2023 7:18 am
boyce moto meter

Last post by dinosbunny « Mon Feb 06, 2023 10:54 pm
Replies: 4
by dinosbunny » Mon Feb 06, 2023 3:13 pm

First post

FS new chrome low fin radiator cap $20 newcap1.jpeg
new boyce moto meter $85 meter2.jpeg meter3.jpeg

Last post

moto meter is sold pending payment thankyou

4 Replies

1423 Views

Last post by dinosbunny
Mon Feb 06, 2023 10:54 pm
starter for core

Last post by dinosbunny « Mon Feb 06, 2023 10:40 pm
Replies: 2
by dinosbunny » Mon Feb 06, 2023 3:06 pm

First post

FS- nice starter for rebuild-$65 plus shipping

Last post

starter is sold pending payment thankyou

2 Replies

943 Views

Last post by dinosbunny
Mon Feb 06, 2023 10:40 pm
WTB #55 Ford script key

Last post by Burlingtontguy « Mon Feb 06, 2023 10:02 pm

by Burlingtontguy » Mon Feb 06, 2023 10:02 pm

I am looking for an original #55 key, thanks, Dernnis

0 Replies

528 Views

Last post by Burlingtontguy
Mon Feb 06, 2023 10:02 pm
brass rim

Last post by dinosbunny « Mon Feb 06, 2023 9:33 pm
Replies: 2
by dinosbunny » Mon Feb 06, 2023 3:19 pm

First post

fs new 1 pair of repo brass headlight rims $65 plus shipping rims2.jpeg
1 pair original relectors $35 plus shipping reflector2.jpeg reflector1.jpeg

Last post

Brass headlight rims sold pending payment

2 Replies

1063 Views

Last post by dinosbunny
Mon Feb 06, 2023 9:33 pm
Aux transmission identification help

Last post by TXGOAT2 « Mon Feb 06, 2023 8:55 pm
Replies: 10
by Scott Gilham » Wed Feb 01, 2023 7:39 pm

First post

Got this trans in a T parts pickup. I'm thinking it was with this T stuff because they we're looking to adapt it to a T somehow.
Any guesses out there?

Last post

It may be a passenger car transmission modified for non-automotive use. I've seen a number of old, line-shaft driven machine tools set up to run off an electric motor thru an old car transmission to give a multi-speed drive.

10 Replies

2733 Views

Last post by TXGOAT2
Mon Feb 06, 2023 8:55 pm
Front Axle

Last post by Dan Hatch « Mon Feb 06, 2023 7:08 pm
Replies: 8
by BUSHMIKE » Mon Feb 06, 2023 7:34 am

First post

Anyone in the U.P. or Northern Wisconsin have a nice later Model T front axle?

Last post

I knew there was a lot of T guys in around Marquette. There may still be some. Most not on internet. Dan

8 Replies

1910 Views

Last post by Dan Hatch
Mon Feb 06, 2023 7:08 pm
Wanted: 1913/14 rear end halves

Last post by Craig E. Luton « Mon Feb 06, 2023 6:28 pm
Replies: 6
by Craig E. Luton » Sun Feb 05, 2023 7:45 pm

First post

Wanted 1913-14 rear end halves in good usable condition. Need 1 or a pair.
Craig E. Luton

Last post

Thank you everyone. I have just purchased a pair of 13-14 rear end halves so am not in need anymore.

Craig

6 Replies

2008 Views

Last post by Craig E. Luton
Mon Feb 06, 2023 6:28 pm
misc parts

Last post by dinosbunny « Mon Feb 06, 2023 4:30 pm
Replies: 1
by dinosbunny » Mon Feb 06, 2023 3:32 pm

First post

Fs new electric tail light $30 plus shipping light2.jpeg newtaillight1.jpeg
original nice ratchet for starting crank $15-plus shipping crankrachet.jpeg
license plate holder-not sure what year $15 plus shipping plateholder1.jpeg
engine blocks at ears -2- $5 plus shipping engineblock.jpeg

Last post

all parts have been sold pending payment, thank you

1 Replies

901 Views

Last post by dinosbunny
Mon Feb 06, 2023 4:30 pm
misc tools

Last post by dinosbunny « Mon Feb 06, 2023 4:29 pm
Replies: 10
by dinosbunny » Mon Feb 06, 2023 3:03 pm

First post

FS- misc model t repro tools, used on two cars only all for $200 plus shipping or by the piece.
spindle bushing reamer $75 reamer.jpeg
spindle bushing driver $15
spindle bushing removal tool $18
bushing thrust cutter $45 planer2.jpeg
thread repair tool (to chase the threads on the hub where the hub cap threads on) $75 chaser2.jpeg

Last post

All tools have been sold pending payment thank you

10 Replies

2446 Views

Last post by dinosbunny
Mon Feb 06, 2023 4:29 pm
Set of Five (5) Schrader 777 Tire Stems and Hardware

Last post by CudaMan « Mon Feb 06, 2023 3:52 pm
Replies: 4
by CudaMan » Mon Feb 06, 2023 3:26 pm

First post

Here is a set of five (5) Schrader 777 tire valve stems with dust covers and all the correct hardware for a black era car. Some have had modern valve cores installed, others still have their original cores. Some extra hardware is included, see the attached pic.

I'm asking $125.00 for all, which includes USPS Priority shipping. If interested, PM...

Last post

Sorry Mike, the stems are going to Stephen and Bill, they were the last I had.

All the stems are spoken for.

4 Replies

1280 Views

Last post by CudaMan
Mon Feb 06, 2023 3:52 pm
Wooden Wheels with 15" Tires

Last post by Ashley « Mon Feb 06, 2023 2:23 pm
Replies: 2
by Ashley » Wed Feb 01, 2023 1:04 pm

First post

Pair of wooden wheels with 1926-1927 Drums and Hubs with 15 tires. $200 for the pair.

thumbnail_IMG_1760.jpg
thumbnail_IMG_1759.jpg
thumbnail_IMG_1758.jpg
thumbnail_IMG_1757.jpg
thumbnail_IMG_1756.jpg

Last post

Sold, Thank you!

2 Replies

1239 Views

Last post by Ashley
Mon Feb 06, 2023 2:23 pm
Parts for sale

Last post by KimDobbins « Mon Feb 06, 2023 1:58 pm
Replies: 6
by KimDobbins » Sun Feb 05, 2023 6:48 pm

First post

Nice Buttler brass water pump, stainless steel shaft. $200. Original Battery box cover with door, very nice, $125. Tool for lifting transmission on and off engine, well made and very useful, $85. Ford oil can with original spring loaded mount, $85.00. All plus shipping. kdmks AT att.net.

Last post

all parts sold. Thanks MTFCA

6 Replies

2084 Views

Last post by KimDobbins
Mon Feb 06, 2023 1:58 pm
1915 Tail Light/License Bracket

Last post by 25tfire « Mon Feb 06, 2023 1:28 pm
Replies: 4
by 25tfire » Fri Feb 03, 2023 12:22 pm

First post

Like new condition, has the correct riveted end. $75 plus shipping. Jim

Last post

OK 16 it is, still for sale.

4 Replies

1420 Views

Last post by 25tfire
Mon Feb 06, 2023 1:28 pm
Steering wheel fs

Last post by CTLeonard « Mon Feb 06, 2023 9:23 am
Replies: 4
by CTLeonard » Fri Jul 22, 2022 9:59 am

First post

Dodge bros. Spider. 15 o.d. wheel. 200.00 plus shipping IMG_20220722_085541746.jpg IMG_20220722_085527453.jpg IMG_20220722_085515377.jpg

Last post

Xxxxxxxxxx

4 Replies

1777 Views

Last post by CTLeonard
Mon Feb 06, 2023 9:23 am
Oil can with bracket

Last post by Harvey Bergstrom « Mon Feb 06, 2023 7:39 am
Replies: 1
by Harvey Bergstrom » Sun Feb 05, 2023 9:22 pm

First post

WTB Oil can with bracket for my ‘24 Touring.

Last post

I’m sorry I forgot to specify that I would like an oil can with the Ford script on it.

1 Replies

1039 Views

Last post by Harvey Bergstrom
Mon Feb 06, 2023 7:39 am
WTB Differential Axle Gears (FOUND)

Last post by MarkS « Mon Feb 06, 2023 12:09 am
Replies: 16
by MarkS » Tue Jan 17, 2023 5:21 pm

First post

I am looking for two differential axle gears (the ones pressed onto the axles) in very good condition for use in my 1915 Touring car. I have purchased new axles, but my existing gears are quite pitted, and I understand that reproductions are not available.

After nearly a year's worth of effort, I have just recently gotten my car back on the road...

Last post

Thanks to all on this forum for the gears and advice I received. I built a holding fixture and was able to press the gears onto my new axles without issues. The press fit was 1.4 thousands interference, and I had to dress one side of the new keys a bit for a nice tap-in with a brass hammer fit. For the fixture, I welded a standard 5/8 -18 nut to...

16 Replies

3738 Views

Last post by MarkS
Mon Feb 06, 2023 12:09 am
Attention! Dan Snell!

Last post by SurveyKing « Sun Feb 05, 2023 9:59 pm
Replies: 1
by Larry LaPatka » Sat Feb 04, 2023 5:12 pm

First post

Dan, all I get is “all circuits are busy when trying to call you or text you. Call me 423.237.8846 or 423.623.5656
Package is ready.
Thanks Larry

Last post

Larry,
I just got your message, I'm out at my ranch where connection is poor. I'll call you tomorrow. Thanks
Dan

1 Replies

1170 Views

Last post by SurveyKing
Sun Feb 05, 2023 9:59 pm
Oil can with bracket

Last post by Harvey Bergstrom « Sun Feb 05, 2023 9:22 pm

by Harvey Bergstrom » Sun Feb 05, 2023 9:22 pm

WTB Oil can with bracket for my ‘24 Touring.
Harvey Bergstrom

0 Replies

815 Views

Last post by Harvey Bergstrom
Sun Feb 05, 2023 9:22 pm
Parts for salec

Last post by Larry LaPatka « Sun Feb 05, 2023 8:23 pm
Replies: 3
by Larry LaPatka » Sun Feb 05, 2023 12:45 pm

First post

Speedo wheel gear and plate $100.00
8 hood pins (4 with springs). $20.00
Original ammeter (black ring). $38.00
Beautiful dome light cover. $12.00
Original Carb pipe $10.00
New 5031 complete wire harness ( 1915-1922). $15.00
New 7853C chrome rear view mirror $35.00
All items plus postage
Call/text/email
Cell: 423.237.8846
Email: ltlapatka@gmail.com

Last post

I am sorry my error. The wiring harness is NOT a 5031 but rather a 5031 for 1915 thru 1922 Model T’s. The price is correct at $15.00 plus postage. Thank You MTFCA

3 Replies

1413 Views

Last post by Larry LaPatka
Sun Feb 05, 2023 8:23 pm
SOLD FS Front Fender

Last post by Stephen1915 « Sun Feb 05, 2023 6:57 pm
Replies: 1
by GPS » Sun Feb 05, 2023 6:26 pm

First post

FS New Old Stock Genuine Ford 1917 to 1923 right front fender. Has areas of surface rust $275.00 gregps@msn.com Cell 612 940 5972

Last post

I’ll take it

1 Replies

761 Views

Last post by Stephen1915
Sun Feb 05, 2023 6:57 pm
SOLD Ford Bumpers

Last post by GPS « Sun Feb 05, 2023 6:15 pm

by GPS » Sun Feb 05, 2023 6:15 pm

FS 1926, 1927 Genuine Ford accessory front and rear bumpers in excellent original condition $500.00 for all plus shipping email gregps@msn Cell 612 940 5972 Greg

0 Replies

733 Views

Last post by GPS
Sun Feb 05, 2023 6:15 pm
For Sale 10 Tooth Pinion Gear (SOLD)

Last post by WaltM « Sun Feb 05, 2023 5:51 pm
Replies: 5
by WaltM » Wed Jan 18, 2023 9:32 am

First post

Item has been sold

Last post

Sold. Thanks, Walt

5 Replies

1529 Views

Last post by WaltM
Sun Feb 05, 2023 5:51 pm
TW timer brushes- round

Last post by Rich P. Bingham « Sun Feb 05, 2023 5:37 pm
Replies: 7
by TWrenn » Wed Feb 01, 2023 2:02 pm

First post

I have a source for which to acquire the round brush for the TW timer. Naturally the larger the quantity the lower the price. Example...12 would be around $26 ea. but if I can scarf up an order for 24 it is down to a bit under $18, plus tax and shipping. Passing cost on directly. I'm not in the parts business. I just want to keep what I feel is...

Last post

One last bump. Don't want to miss anyone !
Thanks to all who responded, you've made this possible !!

7 Replies

1715 Views

Last post by Rich P. Bingham
Sun Feb 05, 2023 5:37 pm
wanted 1910 Exhaust muffler

Last post by T Cruiser « Sun Feb 05, 2023 4:41 pm
Replies: 1
by andrew o sullivan » Sun Feb 05, 2023 3:30 pm

First post

hi there looking wanted new Exhaust muffler 1910 ford model t anybody out there willing t part with it if you have one . i have looked in the parts suppliers but there out of stock

Last post

I have a good original. Ted 503-728-3476

1 Replies

819 Views

Last post by T Cruiser
Sun Feb 05, 2023 4:41 pm
9/16 Upholstery Nails

Last post by Original Smith « Sun Feb 05, 2023 2:11 pm

by Original Smith » Sun Feb 05, 2023 2:11 pm

Want to buy NOS or good used authentic upholstery nails. I'll buy a box if they correct. These may have been used up until the one man tops?

0 Replies

610 Views

Last post by Original Smith
Sun Feb 05, 2023 2:11 pm
Moved

Last post by Reno Speedster « Sun Feb 05, 2023 1:42 pm

by Reno Speedster » Sun Feb 05, 2023 1:42 pm

Moved to correct forum

0 Replies

752 Views

Last post by Reno Speedster
Sun Feb 05, 2023 1:42 pm
1927 "long block"

Last post by TWrenn « Sun Feb 05, 2023 12:55 pm
Replies: 1
by Gen3AntiqueAuto » Sun Feb 05, 2023 11:53 am

First post

Hey guys - I still have this engine sitting here getting dusty. Someone out there must need it. Got bills to pay here, gotta sell some stuff. Located in Middleborough MA. Cash and carry. Video examination so you can get a better look than just a still photo. Click this link to watch (it's on youtube):

Last post

Yep Tim it's 40 over!
And a posted price might help your cause...I dunno.

1 Replies

910 Views

Last post by TWrenn
Sun Feb 05, 2023 12:55 pm
FS: Walden 6318 Engine Block/Oil Pan Special Wrench

Last post by Scott_Conger « Sun Feb 05, 2023 12:17 pm
Replies: 4
by LOCParts » Sun Feb 05, 2023 10:04 am

First post

For Sale: A Walden Worcester #6318 9/16” speed wrench with the 6418 attachment that turns this speed wrench into a one man tool for loosening or tightening 9/16 inch size bolts and nuts commonly found on Model T motors. Unlike many other speed wrenches of this type, the 6418 attachment is removable so the 6318 portion of the wrench can be used as...

Last post

that was a nice wrench at a very nice price. Well done, Charlie!

4 Replies

1334 Views

Last post by Scott_Conger
Sun Feb 05, 2023 12:17 pm
FS: Alvord Model T Main Bearing Reamer

Last post by LOCParts « Sun Feb 05, 2023 11:43 am
Replies: 2
by LOCParts » Sun Feb 05, 2023 9:47 am

First post

For Sale: Alvord F3031-2-3 Model T main bearing reamer. This is a long reamer made by the Alvord Reamer Company of Millersburg, PA. It is designed to ream all three main bearings simultaneously. It is a good reamer to have when fitting a crankshaft to existing babbitt bearings. The reamer cuts bearings to the standard size of 1.250, but it’s...

Last post

The Alvord main bearing reamer has been spoken for.

Thanks MTFCA!

2 Replies

896 Views

Last post by LOCParts
Sun Feb 05, 2023 11:43 am
5Z-815 Wrench

Last post by Model T Matt « Sun Feb 05, 2023 8:28 am
Replies: 5
by Model T Matt » Tue Jan 31, 2023 9:23 am

First post

For sale wrench marked 5Z-815 this is a crankshaft center bearing bolt wrench per the tool list asking $70.00 shipped to your location call Matt 503-824-2681

Last post

sent you a e-mail saying the shipping was included as per the add- got no reply - went to next- Sorry-

5 Replies

1617 Views

Last post by Model T Matt
Sun Feb 05, 2023 8:28 am
SOLD 1913/14 BERGS Show Radiator Kit

Last post by Stephen1915 « Sat Feb 04, 2023 11:11 pm
Replies: 1
by Stephen1915 » Fri Feb 03, 2023 5:21 pm

First post

1913-1914 early 1915. Bergs Made, Round Tube Radiator Kit. Very nicely made components and much heavier gauge material when comparing to a Brassworks. Inlet and outlet connections are solid cast brass , and core fully soldered by Bergs. High Quality.

Have many more up close photos.

Can ship but would be best to deliver to Chickasha.

$750...

Last post

To the top

1 Replies

1100 Views

Last post by Stephen1915
Sat Feb 04, 2023 11:11 pm
WTB - Brake Rods 1920-1925

Last post by SurveyKing « Sat Feb 04, 2023 9:36 pm
Replies: 10
by SurveyKing » Tue Jan 24, 2023 5:59 pm

First post

I am looking to purchase as quickly as possible a pair of good used brake rods for my 1924 Touring. Must have good threads that will chase well and no wallowed-out holes in the end where it attaches to the brake cam lever. Thank You

Daniel Snell
Danielsnell2@twc.com

Last post

Thank you, I just ordered them. I always prefer Ford originals but they decent ones don't appear to be out there.

10 Replies

2938 Views

Last post by SurveyKing
Sat Feb 04, 2023 9:36 pm
transmission drums

Last post by Melba Nolan « Sat Feb 04, 2023 9:12 pm
Replies: 4
by Melba Nolan » Mon Sep 26, 2022 7:54 pm

First post

For sale: slow speed drum $150 plus postage
20220723_084930.jpg

Last post

move to top

4 Replies

1746 Views

Last post by Melba Nolan
Sat Feb 04, 2023 9:12 pm
worm gear TT 18-27

Last post by Melba Nolan « Sat Feb 04, 2023 9:11 pm
Replies: 2
by Melba Nolan » Sun Nov 20, 2022 10:59 am

First post

For sale: TT worm gear Ford script $200 plus postage
20221120_091907.jpg 20221120_091917.jpg 20221120_091947.jpg 20221120_091923.jpg 20221120_091937.jpg

Last post

move to top

2 Replies

1289 Views

Last post by Melba Nolan
Sat Feb 04, 2023 9:11 pm
Brass headlight rims reduced

Last post by Melba Nolan « Sat Feb 04, 2023 9:10 pm
Replies: 5
by Melba Nolan » Thu Aug 11, 2022 12:17 pm

First post

FOR SALE: heavy solid brass headlight rims no cracks. $175 for the pair
inside diameter is 8 15\16
20220811_110735.jpg 20220811_110800.jpg

Last post

reduced price: $150 plus postage

5 Replies

2060 Views

Last post by Melba Nolan
Sat Feb 04, 2023 9:10 pm
Early Electric Headlight with Lens

Last post by GatorsModelT « Sat Feb 04, 2023 8:25 pm

by GatorsModelT » Sat Feb 04, 2023 8:25 pm

Early electric headlight with lens. Fits very late 1914 and early 1915 Model T Ford. This is the time when they were phasing out gas and bringing in electric headlights. Brass rim has a few minor cracks. As mentioned above has very good Spreadlight lens. $75

0 Replies

764 Views

Last post by GatorsModelT
Sat Feb 04, 2023 8:25 pm
For Sale Gray Davis #7 Gas Head Light-No Longer Available

Last post by Mr. T Ford « Sat Feb 04, 2023 6:50 pm
Replies: 5
by Mr. T Ford » Mon Nov 07, 2022 6:23 pm

First post

For Sale Gray Davis #7 Gas Head Light, $190 or Best Reasonable Offer. See Attached Photographs.No Longer Available

Last post

For Sale Gray Davis #7 Gas Head Light No Longer Available and Removed From Listing

5 Replies

1788 Views

Last post by Mr. T Ford
Sat Feb 04, 2023 6:50 pm
FS Bosch dist parts

Last post by T Cruiser « Sat Feb 04, 2023 6:09 pm

by T Cruiser » Sat Feb 04, 2023 6:09 pm

Bosch model 600 clip on dist. Cam gear,nut,spacer,resister,and original instruction sheet.$30.00 plus $10.40 shipping cont. US. Ted 503-728-3476

0 Replies

697 Views

Last post by T Cruiser
Sat Feb 04, 2023 6:09 pm
FS: 1911 Holley 4500 Carburetor

Last post by LOCParts « Sat Feb 04, 2023 3:13 pm
Replies: 3
by LOCParts » Sat Feb 04, 2023 11:24 am

First post

For sale: An original 1911 Holley 4500 carburetor. The carburetor we are offering is all brass, complete and in very good condition. The levers and adjustment screw move freely, and the float also free. It can easily be restored to show quality. $1800 plus shipping.

F951CC59-D568-44CA-8005-FFF390122635.jpeg

The 4500 Holley differs from the...

Last post

The Holley 4500 carburetor has been spoken for.

Thanks MTFCA!

3 Replies

1217 Views

Last post by LOCParts
Sat Feb 04, 2023 3:13 pm
FS: Self-Adjusting Connecting Rod Bolts

Last post by LOCParts « Sat Feb 04, 2023 3:12 pm
Replies: 1
by LOCParts » Sat Feb 04, 2023 11:47 am

First post

For Sale: A complete set of self-adjusting connecting rod bolts for the Model T. These bolts replace the stock Ford connecting rod bolts. They are self-adjusting or tightening to keep the connecting rod bearings properly adjusted. The bolts are complete and in good used condition. This is a full set of eight, enough for all four connecting rods....

Last post

The self-adjusting connecting rod bolts have been spoken for.

Thanks MTFCA!

1 Replies

918 Views

Last post by LOCParts
Sat Feb 04, 2023 3:12 pm
FS: Stevens 2713-14 Spindle Bushing Reamer

Last post by LOCParts « Sat Feb 04, 2023 3:10 pm
Replies: 3
by LOCParts » Sat Feb 04, 2023 12:01 pm

First post

For sale: A genuine Stevens, NY reamer for the spindle body and spindle arm bushings. This reamer is two sizes and will do both the bushings in the spindle body and the spindle arms. Most importantly, it will ream the spindle body bushings to the correct .503” size Ford recommended when replacing the bushings. Reamers that will cut .503” are hard...

Last post

The Stevens 2713-14 spindle bushing reamer has been spoken for.

Thanks MTFCA!

3 Replies

1282 Views

Last post by LOCParts
Sat Feb 04, 2023 3:10 pm
Early steering gear case part

Last post by tselliott « Sat Feb 04, 2023 2:20 pm

by tselliott » Sat Feb 04, 2023 2:20 pm

Only the gear housing remains.
Make offer
Scott Elliott
971-5O6-94O2

0 Replies

833 Views

Last post by tselliott
Sat Feb 04, 2023 2:20 pm
For Sale: Stewart Speedometer

Last post by Ed Fuller « Sat Feb 04, 2023 12:10 pm
Replies: 4
by Ed Fuller » Sat Jan 28, 2023 8:35 pm

First post

Stewart speedometer. Shaft turns but is stiff. I’m sure it will need to be gone through. The bezel has one small crack.

$50 plus shipping in the U.S.

E74ABA3A-5801-45FC-9889-63E3ACBE5131.jpeg

6DC1A707-498D-43DD-836F-D9BDD6BEA11D.jpeg

B1C8A5FD-1B50-44F5-AFCC-CE5FB8C4A1D7.jpeg

D1DEE83C-B2B8-4C5D-A61E-AB2BE892B626.jpeg...

Last post

Speedometer is sold.

4 Replies

1764 Views

Last post by Ed Fuller
Sat Feb 04, 2023 12:10 pm
For Sale: Wards Riverside Spark Plugs

Last post by Ed Fuller « Sat Feb 04, 2023 12:10 pm
Replies: 2
by Ed Fuller » Sat Jan 28, 2023 9:23 pm

First post

Here is a nice looking set of 3 Wards Riverside spark plugs.

$30 plus shipping in the U.S.

C90D2F32-B90D-4F19-88E1-A2A9500D43F0.jpeg

CAAA7CC7-0226-43C5-ABF9-3E7C45CD1D7D.jpeg

64793947-9DE3-49C7-9247-CF614EB653F6.jpeg

874AE4DE-BF4B-4245-ACCC-64066D139CFA.jpeg

Last post

Plugs are sold.

2 Replies

1258 Views

Last post by Ed Fuller
Sat Feb 04, 2023 12:10 pm
FS - From Here to Obscurity - Hardcover

Last post by sprobst « Sat Feb 04, 2023 10:41 am
Replies: 2
by sprobst » Sat Feb 04, 2023 10:22 am

First post

I have a 1971 copy of From Here to Obscurity by Ray Miller and Bruce McCalley.

I will sell it to you for the cost of shipping.

Please send me your address through a private message and I will calculate the shipping and you can pay me through paypal.

IMG_2041.jpg

Last post

Sold. I'll get back to the folks that sent PM.

2 Replies

1029 Views

Last post by sprobst
Sat Feb 04, 2023 10:41 am
26/27 Roadster pu/ coupe fenders

Last post by fordrelic « Sat Feb 04, 2023 8:04 am

by fordrelic » Sat Feb 04, 2023 8:04 am

I have a set of rear fenders for 26/27 roadster or coupe.
$500 for the set.

0 Replies

702 Views

Last post by fordrelic
Sat Feb 04, 2023 8:04 am
WTB: 26/27 Right Rear Roadster Pickup Fender

Last post by fordrelic « Sat Feb 04, 2023 7:44 am
Replies: 1
by Nathan K » Mon Jan 30, 2023 10:46 pm

First post

I'll take a pair, but I really need the right rear. I'll pay for shipping if you're not within a reasonable drive of St Louis, MO. Thanks.

Last post

I have a pair of fenders if you are interested.

1 Replies

840 Views

Last post by fordrelic
Sat Feb 04, 2023 7:44 am
WTB Model B Zenith Carburetor and Intake manifold FOUND

Last post by fordrelic « Sat Feb 04, 2023 7:41 am
Replies: 5
by henryford2 » Tue Jan 31, 2023 5:44 pm

First post

Looking for a good complete rebuildable core Model B carburetor 1932 and intake manifold. There's a number of the them on Ebay, prefer to buy from a club member and hope to avoid the overpriced shipping and sales tax. Thanks

Last post

I have intake,if you still need one.

5 Replies

1594 Views

Last post by fordrelic
Sat Feb 04, 2023 7:41 am
FS pair of steering arms

Last post by Richard K « Sat Feb 04, 2023 1:23 am
Replies: 2
by Tim D » Thu Feb 02, 2023 3:56 pm

First post

for sale a pair of steering arms with new bushings. Overall nice condition.
$40 for the pair plus shipping in the US $10 by USPS

Last post

Email sent for purchase of the Steering Arms. Rich

2 Replies

1088 Views

Last post by Richard K
Sat Feb 04, 2023 1:23 am
KC warford transmission

Last post by ModelTWoods « Fri Feb 03, 2023 11:31 pm
Replies: 1
by Ron Osburn » Fri Feb 03, 2023 6:07 pm

First post

Want to buy a KC layne warford transmission .
Thank you .

Last post

Layne and some of the vendors sell new ones. Gently used ones are made of unobtainium , because an owner would have to be crazy to sell a used one.

1 Replies

982 Views

Last post by ModelTWoods
Fri Feb 03, 2023 11:31 pm
FTGH A/C Lamp parts

Last post by Scott Rosenthal « Fri Feb 03, 2023 9:40 pm
Replies: 1
by Scott Rosenthal » Wed Feb 01, 2023 10:49 am

First post

Free to good home...Atwood Castle 104A brass amp parts. No glass, fonts, or burners...some usable chimney caps, housings,reflectors, faceted jewels, doors. 2 boxes of parts.
You pay shipping. If not spoken for by 2,5,2023 will be trashed. 513 Three Seven Eight 4235. Phone or Text only please.

Last post

Atwood Castle lamp parts on their way to Randy. Thx Randy and thx MTFCA

1 Replies

922 Views

Last post by Scott Rosenthal
Fri Feb 03, 2023 9:40 pm
FS: 15-inch Model T Steering Wheel Marked "DODGE BROS." (SOLD)

Last post by WaltM « Fri Feb 03, 2023 5:52 pm
Replies: 1
by WaltM » Fri Feb 03, 2023 3:35 pm

First post

Item has been sold

Last post

Sold pending payment. Thanks, Walt

1 Replies

814 Views

Last post by WaltM
Fri Feb 03, 2023 5:52 pm
WTB 1914 Victor Cowl Light Font

Last post by 25tfire « Fri Feb 03, 2023 5:51 pm

by 25tfire » Fri Feb 03, 2023 5:51 pm

Looking for a nice font for the Victor cowl light for my 1914 Touring. This is the Black and Brass style. Jim 970-373-8864

0 Replies

773 Views

Last post by 25tfire
Fri Feb 03, 2023 5:51 pm
NOS/MINT FRONT FENDERS WANTED

Last post by Stephen1915 « Fri Feb 03, 2023 4:50 pm
Replies: 2
by Stephen1915 » Fri Feb 03, 2023 12:59 pm

First post

WANTED: 1923-25 Front fenders NOS or mint condition. No, I don’t want reproduction.

There are two types I know of-
•1923-mid 24 with rib going outside of apron
•1924-25 and Ford Replacement Fender with rib under apron.

Pairs of either of these are fine.

Going to Chickasha.

Please Email me at
stephensmail2001@gmail.com

Last post

Thanks Joe!

2 Replies

862 Views

Last post by Stephen1915
Fri Feb 03, 2023 4:50 pm
FS: APCO Specialty Tool. Steering Wheel Puller (SOLD)

Last post by WaltM « Fri Feb 03, 2023 4:39 pm
Replies: 1
by WaltM » Fri Feb 03, 2023 3:49 pm

First post

Item has been sold

Last post

Sold pending payment. Thanks Walt

1 Replies

744 Views

Last post by WaltM
Fri Feb 03, 2023 4:39 pm
Parts for sale

Last post by Larry LaPatka « Fri Feb 03, 2023 4:04 pm

by Larry LaPatka » Fri Feb 03, 2023 4:04 pm

Speedo wheel gear and plate. $100.00 plus postage
Original ammeter. $38.00 plus postage
Whirligig original. $13.00 plus postage
Dome light cover original. $12.00 plus postage
Mangan mirror for headlight no cracks $30.00 plus usp
Carb pipe original. $10.00 plus postage
T5030 complete wire loom new fits 1915-1922 T’s
$15.00 plus postage
Black side...

0 Replies

921 Views

Last post by Larry LaPatka
Fri Feb 03, 2023 4:04 pm
1909 Model T Champion X Double Ribbed Spark Plugs, 3X NIB,3X loose used, 4x antiques plugs lot

Last post by jscailik82 « Fri Feb 03, 2023 2:21 pm
Replies: 4
by jscailik82 » Wed Jan 18, 2023 1:38 pm

First post

3x NIB Champions, these look to be repros.
2x Used Champions, these look to be repros.
1x used champion X (update found the box)
4X antique plugs, all look to be used.

$250 For everything + postage
UPDATE : Price cut, $120 + postage

I can get more pictures tonight after work.
Located in Mt .Airy, Maryland

Last post

Lot UPDATE: $95 + postage

There are two new NOS wrapped, brand new

One new NOS repro gapped with note about a broken piece. As pictured
The rest (7x) look fired and are either repros or originals. More pics incoming.

$95 +postage

4 Replies

1593 Views

Last post by jscailik82
Fri Feb 03, 2023 2:21 pm
Wanted Running Board Tool Box

Last post by TRDxB2 « Fri Feb 03, 2023 12:29 pm
Replies: 1
by fredserfass12 » Fri Feb 03, 2023 9:50 am

First post

Wanted for my unrestored Model T. An original running board tool box in good undamaged , unmodified condition. Old paint and minimal surface rust okay. Any assistance from fellow club members will be appreciated.

Last post

Wanted for my unrestored Model T. An original running board tool box in good undamaged , unmodified condition. Old paint and minimal surface rust okay. Any assistance from fellow club members will be appreciated.

See my posting below this. Shipping cost is unfriendly

1 Replies

776 Views

Last post by TRDxB2
Fri Feb 03, 2023 12:29 pm
What is this headlight rim used on?

Last post by RandyB « Fri Feb 03, 2023 7:15 am
Replies: 5
by RandyB » Thu Feb 02, 2023 11:41 am

First post

I bought this rim at a swap meet for my Model T shortly after getting into the hobby. I thought it was a T headlight rim until noticing differences with a T rim. This one has a 9-1/8 diameter rather than the 9 diameter on a T headlight rim. There are also 4 steel pads on the outside of the rim, equally spaced. Does anyone know what this is used on?

Last post

I passed it around at the T club meeting last night. No guesses as to what its use was. If it had been modified in the past, the rim showed no tool markings on the inside of the rim where it might have been welded and ground down. I’m just curious enough to see what’s under the paint. Thanks for the replies on the headlight rim.

5 Replies

1338 Views

Last post by RandyB
Fri Feb 03, 2023 7:15 am
WTB: 1927 rear spring perches

Last post by mike catlin « Fri Feb 03, 2023 7:07 am
Replies: 2
by bmklawt » Thu Feb 02, 2023 5:26 pm

First post

I need 2 rear spring perches for my 1927 Touring.
I can't find mine after rebuilding the rear axle, I'm sure they will pop up as soon as buy some replacements.

Last post

Bruce have some will be at kzoo swap meet this afternoon call me at 58six 3o61887

2 Replies

884 Views

Last post by mike catlin
Fri Feb 03, 2023 7:07 am
Luggage rack

Last post by tselliott « Fri Feb 03, 2023 12:39 am
Replies: 3
by tselliott » Fri Jan 06, 2023 4:12 pm

First post

Running board luggage rack. Everything moves freely as it should. It needs some minor straightening.
$20 OBO plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Sorry I forgot to update this post to Sold

3 Replies

1584 Views

Last post by tselliott
Fri Feb 03, 2023 12:39 am
WTB Metal Front Seat Frame Lid for 1922

Last post by Reno Speedster « Thu Feb 02, 2023 9:15 pm

by Reno Speedster » Thu Feb 02, 2023 9:15 pm

I am looking for one of the metal lids over the gas tank for my 22 roadster. I would like one with the hole for gas cap. Smith and Jones show reproductions in the catalogue (see the photo) but they are experiencing some delay. Before I put one on back order I thought I would see if anyone has one on hand. A good or original or a reproduction would...

0 Replies

601 Views

Last post by Reno Speedster
Thu Feb 02, 2023 9:15 pm
1915 Door Lock F/S

Last post by Layden Butler « Thu Feb 02, 2023 3:06 pm

by Layden Butler » Thu Feb 02, 2023 3:06 pm

Door lock for 1915 right rear touring, not stuck works well but needs a spring, $15, domestic postage $10.

0 Replies

592 Views

Last post by Layden Butler
Thu Feb 02, 2023 3:06 pm
F-S 1926-7 Touring body see photos

Last post by FATMAN « Thu Feb 02, 2023 12:31 pm
Replies: 1
by FATMAN » Thu Feb 02, 2023 10:03 am

First post

Nice straight 1926-7 touring body, this is just the body and body parts,
you will need to make 2 patch panels that go behind where the rear fenders mount.
no chassis is included 1500.00 firm, Bob
815-633-7244

Last post

Good deal solid body

1 Replies

771 Views

Last post by FATMAN
Thu Feb 02, 2023 12:31 pm
09 top rear curtain straps

Last post by Scott Rosenthal « Thu Feb 02, 2023 11:44 am
Replies: 2
by Scott Rosenthal » Thu Jan 12, 2023 5:13 pm

First post

FS rear 09 curtain straps, new. Snyders Part number T-3876 LBCE. Does not include brass footman loops. Straps are black with solid brass buckles. 09 does not use D-rings but buckles directly to buggy rail. 35.00
513 three seven eight 4235.

Last post

Curtain straps spoken for, thx Richard and thx MTFCA.

2 Replies

1098 Views

Last post by Scott Rosenthal
Thu Feb 02, 2023 11:44 am

New Topic

9701 topics

Page 86 of 98
- Jump to page:
Previous
1
…
84
85
86
87
88
…
98
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum