Classifieds - Parts - Page 89

Classifieds - Parts

New Topic

10413 topics

Page 89 of 105
- Jump to page:
Previous
1
…
87
88
89
90
91
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

83915 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

WTB: ammeter for 1927

Last post by RajoRacer « Sun Mar 19, 2023 11:43 am
Replies: 3
by bmklawt » Sat Mar 18, 2023 10:32 pm

First post

Looking for an ammeter, I'll buy the whole ignition switch if needed.

Last post

Model A ammeters are wired for + ground - the wires need to be reversed when hooking up for a T.

Your switch assembly appears to be a reproduction due to the lack of Ford script under the headlamp lever & no number stamped into the key cylinder - just FYI.

3 Replies

903 Views

Last post by RajoRacer
Sun Mar 19, 2023 11:43 am
side curtains Luray

Last post by Will_Vanderburg « Sun Mar 19, 2023 10:44 am
Replies: 1
by RichJ » Sat Mar 18, 2023 5:05 am

First post

Last year in Luray a Guy bought side curtains from me. I was informed that he put them on form for sale ,He said they didn't fit .
I'll gladly refund your money ,I'll be there ,in same spot this year.
Rich 561 262 0393

Last post

That was me. I’m planning to come this year and will bring them.

1 Replies

876 Views

Last post by Will_Vanderburg
Sun Mar 19, 2023 10:44 am
Free: 10-24 x 3/8" Slotted Truss Head Screws

Last post by Charlie_26_TT_Ccab « Sun Mar 19, 2023 1:08 am
Replies: 1
by Rodger Erickson » Sat Mar 18, 2023 12:35 pm

First post

Free: I found still more more old hardware I don't think I'll ever need, this time it's 10-24 x 3/8 truss head slotted screws. I have approx 4. lbs of these, and they should all fit in one USPS Small Flat Rate Box. You pay shipping and they're yours. Sorry if this is off-topic, but no one besides Model T Guys show much interest in this.

Also, I...

Last post

Roger, sent you an email.

1 Replies

753 Views

Last post by Charlie_26_TT_Ccab
Sun Mar 19, 2023 1:08 am
anyone interested in these?

Last post by havnfun « Sun Mar 19, 2023 12:34 am
Replies: 6
by Wayne Mims » Sat Feb 11, 2023 3:32 pm

First post

These are early ball bearings for the real early model t

Last post

If still available, I’m interested

6 Replies

2234 Views

Last post by havnfun
Sun Mar 19, 2023 12:34 am
Model T rear end suction pump

Last post by Ken Buhler « Sat Mar 18, 2023 11:42 pm
Replies: 1
by Craig Leach » Sat Mar 18, 2023 10:35 pm

First post

Brass rear end suction pump. Nice period correct tool for use or display. Polished with new leathers, works great. $75 + shipping. IMG_2503.jpg
email or call sixo2-7six9-0two57
Craig. IMG_2504.jpg

Last post

First in, Craig, I will call you in the morning.
Ken

1 Replies

785 Views

Last post by Ken Buhler
Sat Mar 18, 2023 11:42 pm
SOLD: Original Large Early Boyce Moto Meter with Cap

Last post by South park zephyr « Sat Mar 18, 2023 10:42 pm
Replies: 1
by GGZ » Sat Mar 18, 2023 4:58 pm

First post

SOLD to SCOTT!

This is a nice, original Boyce Universal Model Moto Meter. This is a larger version that is 3 in diameter and 5 tall. The moto meter is in excellent condition and has a machined, steel cap. The moto meter has brass trim and beveled glass. A great piece.

The price is 125.00 including shipping/insurance via FedEx Ground in the USA....

Last post

I’d like to buy the Moto Meter

Scott

1 Replies

800 Views

Last post by South park zephyr
Sat Mar 18, 2023 10:42 pm
Complete 1914 Engine

Last post by Craig Leach « Sat Mar 18, 2023 10:41 pm
Replies: 7
by RichJ » Fri Apr 22, 2022 7:49 pm

First post

I have a complete 1914 engine. It came out of long time dry storage.
.060 aluminum pistons. Very clean. Usable as is, but should be gone through.
Can be picked up in Luray or Richmond if prearranged.
Rich
561-262-0393

Last post

Mark ,
Further examination of the bolts indicates you are correct. I should have looked closer.
Craig.

7 Replies

3171 Views

Last post by Craig Leach
Sat Mar 18, 2023 10:41 pm
Carburetors at Chickasha

Last post by dr1960 « Sat Mar 18, 2023 10:07 pm
Replies: 1
by Corey Walker » Thu Mar 16, 2023 8:05 pm

First post

I never know if I’m going or not until the last minute but I’m here this year. I’ve got the following carburetors if anyone is interested.
1- 1912 Holley H1, viton tipped needle and brass float $550
2- 1914 Holley Pats Pending $325 each
2- cast iron Holley G, one single choke arm, one double $200 each
1 brass Kingston L4. $150
2 brass Holley G...

Last post

Corey it was good to see you there and meet you in person. The Holley G i bought from you on eBay works fantastic on my 1915 T. I could not be happier with it. I hope you did well there.

-David

1 Replies

1120 Views

Last post by dr1960
Sat Mar 18, 2023 10:07 pm
SOLD: 1907 Ford Parts and Instruction Book and "R" Booklet

Last post by Richard K « Sat Mar 18, 2023 9:01 pm
Replies: 1
by GGZ » Sat Mar 18, 2023 12:43 pm

First post

SOLD to Rich!

Here are two pre-Model T books. These are EARLY REPRODUCTION books done by Polyprints in the 1950s. Both are in good condition. The Price List of Parts and Instruction Book is about 50 pages and the Model R is about 20 pages.

The price is 55.00 for both and includes shipping within the USA.

Please call me at 734-730-4274 or email:...

Last post

Have emailed Guy for purpose of buying these Books. Rich

1 Replies

813 Views

Last post by Richard K
Sat Mar 18, 2023 9:01 pm
WTB 26-27 DRIVERS SIDE RAD.SHELL "FOOT"

Last post by MR.T.46962 « Sat Mar 18, 2023 5:25 pm
Replies: 3
by MR.T.46962 » Sat Mar 18, 2023 2:13 pm

First post

I need a L.F. or drivers side radiator shell foot or lower mounting bracket. The piece that rivets to the shell.Thanx,T.

Last post

Got it.Thanx

3 Replies

972 Views

Last post by MR.T.46962
Sat Mar 18, 2023 5:25 pm
Accessory wishbone and tie rod caps F/S

Last post by havnfun « Sat Mar 18, 2023 4:57 pm
Replies: 1
by Layden Butler » Sat Mar 18, 2023 4:15 pm

First post

Incomplete set of accessory spring loaded caps for tie rod and wishbone, $40, domestic postage $10.

Last post

Layden,

I sent you an email

1 Replies

667 Views

Last post by havnfun
Sat Mar 18, 2023 4:57 pm
Rebuilt Kingston L4 #2 FS

Last post by rickd « Sat Mar 18, 2023 4:42 pm

by rickd » Sat Mar 18, 2023 4:42 pm

Rebuilt Kingston L4. On my shop shelves for the last four years, never installed. $115.00+$17.00 usps shipping. Check or money order. Email me through this site. KK1.jpg KK2.jpg KK3.jpg KK4.jpg

0 Replies

658 Views

Last post by rickd
Sat Mar 18, 2023 4:42 pm
Rebuilt Kingston L4 FS

Last post by rickd « Sat Mar 18, 2023 4:38 pm

by rickd » Sat Mar 18, 2023 4:38 pm

Rebuilt Kingston L4 carb. On my shop shelves for the last 4 years, never installed. $115.00+$17.00 usps shipping. Check or money order. Email me through this site. K1.jpg K2.jpg K3.jpg K4.jpg

0 Replies

650 Views

Last post by rickd
Sat Mar 18, 2023 4:38 pm
WTB Used Copy of Vic Zannis' Engine Book.

Last post by ModelTWoods « Sat Mar 18, 2023 3:50 pm

by ModelTWoods » Sat Mar 18, 2023 3:50 pm

Just what title says. I can't find my original copy. Smudges O.K. as long as book is readable. Reply by message on forum or email. Terry Woods

0 Replies

589 Views

Last post by ModelTWoods
Sat Mar 18, 2023 3:50 pm
FS Steering column Electric horn switch SOLD

Last post by Grntea « Sat Mar 18, 2023 3:38 pm
Replies: 5
by TRDxB2 » Tue Feb 07, 2023 8:32 pm

First post

This appears to be an all original switch with original paint. Correct bolt , switch parts, bracket & button
$60 + shipping PayPal to Friend & Family preferred, check & cash okay too

SOLD

Last post

Email sent

5 Replies

1716 Views

Last post by Grntea
Sat Mar 18, 2023 3:38 pm
FOR SALE - SEVEN MODEL T ERA HORN MOUNTING BRACKETS

Last post by Grntea « Sat Mar 18, 2023 3:35 pm
Replies: 1
by Jay In Northern Ca. » Sat Mar 18, 2023 3:22 pm

First post

Asking $45 plus postage.
Horn mounting brackets.jpg
email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Last post

Email sent.

1 Replies

657 Views

Last post by Grntea
Sat Mar 18, 2023 3:35 pm
FS 10 TOOTH PINION NOS

Last post by Mark Chaffin « Sat Mar 18, 2023 3:05 pm
Replies: 1
by Mark Chaffin » Mon Mar 13, 2023 6:50 pm

First post

Interesting 10 tooth pinion. No Ford script. Stamped 24C-C ? on the rear. Looks to be in NOS condition. Price is $125.00 plus $10.20 domestic shipping. Mark Chaffin (951) 805-0928

Pinion 1.jpg

Pinion 2.jpg

Pinion 3.jpg

Last post

Sold to Dave. Thank you Dave.

1 Replies

717 Views

Last post by Mark Chaffin
Sat Mar 18, 2023 3:05 pm
FS LOW CYLINDER HEADS (REDUCED PRICE)

Last post by Mark Chaffin « Sat Mar 18, 2023 12:33 pm
Replies: 2
by Mark Chaffin » Tue Mar 14, 2023 7:04 pm

First post

Four nice low cylinder heads available for purchase. Inspected with no visible cracks detected. Spark plug threads look good. Take your pick was $200.00 each now $175.00. First come first serve. Actual domestic shipping extra. Mark Chaffin (951) 805-0928.

Low 1.jpg

Low 2.jpg

Low 3.jpg

Low 4.jpg

Last post

#4 pending sold to Phill.

2 Replies

1102 Views

Last post by Mark Chaffin
Sat Mar 18, 2023 12:33 pm
Free: Junk E & J "1908" Parts

Last post by Rodger Erickson « Sat Mar 18, 2023 12:27 pm
Replies: 2
by Rodger Erickson » Sat Mar 04, 2023 10:43 am

First post

Free: Another pile of leftover parts from E & J tail lights, mostly sides with the glass broken out, and a couple of bodies with too many stress cracks to use for restoration. Maybe good to practice repairs on? They're yours if you pay shipping. All of this should fit in one USPS Flat Rate Box. Thanks for looking.

ejpcs02.jpg

Last post

Spoken for.
Thanks, MTFCA.

2 Replies

1031 Views

Last post by Rodger Erickson
Sat Mar 18, 2023 12:27 pm
WTB: Front spring, 8 leaf, for my 1927 Touring

Last post by RichJ « Sat Mar 18, 2023 4:53 am
Replies: 2
by bmklawt » Fri Mar 17, 2023 3:55 pm

First post

Looking for the front spring for my 1927 Touring

Last post

I have a very good one ,it will be in Luray also complete ft and rear axle assembly.

2 Replies

954 Views

Last post by RichJ
Sat Mar 18, 2023 4:53 am
FS DASH LAMP

Last post by Mark Chaffin « Fri Mar 17, 2023 5:04 pm
Replies: 1
by Mark Chaffin » Fri Mar 17, 2023 4:20 pm

First post

Dash lamp NORS in the box Old Colony Switches . Bolt spacing appears to be 1 1/8 . The reproductions retail for $29.95 and higher. This one is $20.00 plus $10.20 USPO Domestic Flat Rate shipping. I have two available. Mark Chaffin (951) 805-0928

Lamp.jpg

Last post

Both sold to Steve. Thanks Steve! :)

1 Replies

684 Views

Last post by Mark Chaffin
Fri Mar 17, 2023 5:04 pm
Hand pump and gauge F/S

Last post by Layden Butler « Fri Mar 17, 2023 4:03 pm
Replies: 3
by Layden Butler » Wed Nov 30, 2022 8:08 pm

First post

Brass hand pump made by Lunkenheimer and new pressure gauge $95 for the pair. Domestic shipping $10.

Last post

New price.... $75 including domestic postage!

3 Replies

1403 Views

Last post by Layden Butler
Fri Mar 17, 2023 4:03 pm
F-S O.S. Locking Grease cups for steering and rear axle

Last post by FATMAN « Fri Mar 17, 2023 11:22 am
Replies: 2
by FATMAN » Thu Mar 16, 2023 10:59 am

First post

F-S O.S. Locking Grease cups for steering and rear axle
photo shows size compared to stock grease cups these have the spring retainer to keep cover from coming loose most look to be N.O.S. 3.50 Each plus postage, Bob

Last post

Tom send me a e mail. with name and address so I can figure postage
26 sold so far

2 Replies

1001 Views

Last post by FATMAN
Fri Mar 17, 2023 11:22 am
1911 Brass Jno Brown Carbide Generator (Sold)

Last post by modeltbarn « Thu Mar 16, 2023 5:47 pm
Replies: 5
by modeltbarn » Sat Mar 04, 2023 4:46 pm

First post

This is a new repop, never mounted, made by the same person in Australia that has built them for years for the vendors. It's never been mounted. It can use polishing, but I gave away my brass polish.... $1,500 plus actual shipping, local pickup in Southern CA is fine, or I can bring it to Tulare in April.

Last post

This is sold

5 Replies

2007 Views

Last post by modeltbarn
Thu Mar 16, 2023 5:47 pm
FS early crank handle SOLD

Last post by Quickm007 « Thu Mar 16, 2023 5:25 pm
Replies: 1
by Model T Tom » Thu Mar 16, 2023 9:13 am

First post

Nice crank handle $75.00 plus shipping
Tom Butterworth
772-475-9142

Last post

If the person change her mind, I'm interested. I'm on my way to Florida tomorrow.

1 Replies

1016 Views

Last post by Quickm007
Thu Mar 16, 2023 5:25 pm
17-21 ball bearing fan

Last post by ThreePedalTapDancer « Thu Mar 16, 2023 4:30 pm
Replies: 3
by ThreePedalTapDancer » Sat Feb 25, 2023 2:12 pm

First post

Nice sealed bearing fan, turns smooth and silent. Good crown on hub. Ready to use. 75.00 plus shipping lower 48.

BB058F35-397F-4E25-83A4-82BFD4BF8B22.jpeg

Last post

Email sent Ryan.

3 Replies

1170 Views

Last post by ThreePedalTapDancer
Thu Mar 16, 2023 4:30 pm
Ignition timing coil & spark tester

Last post by Craig Leach « Thu Mar 16, 2023 1:46 pm
Replies: 1
by Craig Leach » Wed Mar 15, 2023 8:57 pm

First post

US Pat. 1184154 May 23 1916 Automatic Motor Control Corp NY city TDC dial indicator with spark cap gauge. Five plug adapters, 5 piston
probes with locks & wires ( had to machine the one for model T adaptor) Thanks to Dan Hatch I know what this is, Weidenhoff I think is
the Mfg. This is a very period correct tool for collecting or using. Dial...

Last post

Sale pending. Thanks Richard.
Craig.

1 Replies

720 Views

Last post by Craig Leach
Thu Mar 16, 2023 1:46 pm
For Sale: Complete set of 1926-7 Model T Fenders for touring and sedan

Last post by GatorsModelT « Thu Mar 16, 2023 10:47 am

by GatorsModelT » Thu Mar 16, 2023 10:47 am

For Sale: Complete set of 1926-27 Model T Fenders for touring and sedan. Right front fender is New Old Stock other fenders are used but in good condition. The fendors will be at the Chickasha swap meet in Oklahoma. Will be there till Saturday. They can be picked up there.
$1150.00 for complete set. Can't place but 5 photos here. Call for more...

0 Replies

708 Views

Last post by GatorsModelT
Thu Mar 16, 2023 10:47 am
F-S Original Carburetor heat pipe

Last post by FATMAN « Thu Mar 16, 2023 10:27 am

by FATMAN » Thu Mar 16, 2023 10:27 am

F-S Original Carburetor heat pipe, pre. 1926-7,nice condition, some very light surface rust 15.00 plus postage
Bob
815-633-7244
modelt2001@comcast.net

0 Replies

625 Views

Last post by FATMAN
Thu Mar 16, 2023 10:27 am
FS another early crank handle # 2

Last post by Model T Tom « Thu Mar 16, 2023 9:17 am

by Model T Tom » Thu Mar 16, 2023 9:17 am

One more $30.00 plus shipping
Tom Butterworth
772-475-9142

0 Replies

768 Views

Last post by Model T Tom
Thu Mar 16, 2023 9:17 am
2 bands

Last post by Melba Nolan « Thu Mar 16, 2023 7:48 am
Replies: 4
by Melba Nolan » Tue Nov 08, 2022 5:52 pm

First post

For sale: 2 bands has new wood lining and the other is regular lining. $25 each plus shipping
20221104_162043.jpg 20221104_163813.jpg

Last post

wooden band sold

4 Replies

1530 Views

Last post by Melba Nolan
Thu Mar 16, 2023 7:48 am
Hand Pump

Last post by Craig Leach « Wed Mar 15, 2023 9:51 pm
Replies: 2
by Craig Leach » Wed Mar 15, 2023 8:15 pm

First post

Large hand pump, has no brackets & any mount has been cut off the end ( maybe vintage beer pump) $50 + shipping looks like it will fit in
a medium USPS flat Rate box. IMG_2496.jpg IMG_2497.jpg
Please email or call 6027six 9 zero two 57
Craig.

Last post

Sale pending. Thanks Richard.
Craig.

2 Replies

988 Views

Last post by Craig Leach
Wed Mar 15, 2023 9:51 pm
F.S. accessory elevated timer

Last post by DustySpokes « Wed Mar 15, 2023 9:36 pm
Replies: 1
by Nate22huckster » Wed Mar 15, 2023 9:08 pm

First post

For sale: accessory elevated timer, unknown make, I do not have the cam gear, has broken linkage arm. I do have the lid, I just took it off to show the internals. Condition is as shown in the pictures. $100 + shipping OBO

DDBE0A16-2020-44CF-9882-448DF5373BAF.jpeg

319E4CAE-7B84-42FE-8040-819901FC9914.jpeg...

Last post

I have one like this . The idea of this job was to keep the timer up high and dry out of the water.

1 Replies

885 Views

Last post by DustySpokes
Wed Mar 15, 2023 9:36 pm
FS Lots of parts. 15% OFF any parts on my list

Last post by TXGOAT2 « Wed Mar 15, 2023 6:30 pm
Replies: 2
by BenLefebre » Tue Feb 26, 2019 4:02 pm

First post

FOR SALE - I have quite a few more items available at 15% OFF my latest list that was sent out to many of you that requested it. If any one else would like one, just email me - benlefebre@juno.com -and I'll attach it. Check out my ad from Saturday 02-23-19 ,at 8:52PM for lots of other items . If you would like photos of any of the items, I can...

Last post

Check the date on the ad.

2 Replies

2311 Views

Last post by TXGOAT2
Wed Mar 15, 2023 6:30 pm
rear spring shackles 23/27 reduced price sold

Last post by Melba Nolan « Wed Mar 15, 2023 6:09 pm
Replies: 5
by Melba Nolan » Sat Oct 29, 2022 10:11 am

First post

For sale: very good condition rear spring shackles complete. $125 includes shipping 23/27
20221029_085141.jpg 20221029_085129.jpg 20221029_085129.jpg

new price $75 plus shipping

Last post

sold pending payment

5 Replies

1756 Views

Last post by Melba Nolan
Wed Mar 15, 2023 6:09 pm
ISO clamps brackets for bud vase

Last post by Britanietx « Wed Mar 15, 2023 4:48 pm
Replies: 3
by Britanietx » Wed Mar 15, 2023 9:53 am

First post

ISO of clamps - brackets :D for bud vases

Last post

Thank you Ed, I see them and will order - want to go home tonight and pick which one I need - I see there are ( 3) versions- thanks!

3 Replies

852 Views

Last post by Britanietx
Wed Mar 15, 2023 4:48 pm
For Sale

Last post by GPS « Wed Mar 15, 2023 11:43 am

by GPS » Wed Mar 15, 2023 11:43 am

FS KW Master Vibrator In Good Original As Found Condition With Original Finish $75.00 plus shipping Greg 612 940-5972 gregps@msn.com

0 Replies

795 Views

Last post by GPS
Wed Mar 15, 2023 11:43 am
For Sale

Last post by GPS « Wed Mar 15, 2023 11:40 am

by GPS » Wed Mar 15, 2023 11:40 am

FS 1911-1914 Right Side (passenger) Headlight Fork Good Used Original Ford $50.00 plus shipping Greg 612 940-5972 gregps@msn.com

0 Replies

690 Views

Last post by GPS
Wed Mar 15, 2023 11:40 am
FOR SALE - PRIMING CUP CLINDER HEAD BOLTS, PATENTED APRIL 15 1913. NEW OLD STOCK IN THE ORIGINAL BOX

Last post by Richard K « Wed Mar 15, 2023 9:59 am
Replies: 2
by Jay In Northern Ca. » Tue Mar 14, 2023 5:23 pm

First post

These are well over a hundred year old brand new priming cup head bolts that turn a standard Model T cylinder head into a priming cup cylinder head. Asking $225 plus postage. primmer cups 1.jpg Primmer Cups 2.jpg Primmer Cups 3.jpg Primmer Cups 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg

Last post

Email sent for purchase of this item. Rich

2 Replies

1194 Views

Last post by Richard K
Wed Mar 15, 2023 9:59 am
FS: SOLD: Heavy Duty Wire Hub and TT Truck Puller (SOLD)

Last post by WaltM « Wed Mar 15, 2023 9:54 am
Replies: 3
by WaltM » Sat Mar 04, 2023 4:47 pm

First post

Item has been sold

Last post

Heavy duty TT puller has been Sold, pending payment. Thanks Walt

3 Replies

1020 Views

Last post by WaltM
Wed Mar 15, 2023 9:54 am
Cam bearings

Last post by Joe Bell « Wed Mar 15, 2023 7:00 am
Replies: 5
by BarrettR » Tue Mar 14, 2023 12:18 am

First post

Hey guys, does anybody pour babbit in old cam bearing shells? I know new ones are available from langs but I heard they don't fit well without repairing.

Last post

As Dan said you do want to start with good shells.

5 Replies

1734 Views

Last post by Joe Bell
Wed Mar 15, 2023 7:00 am
Want to buy: shackles

Last post by Nv Bob « Wed Mar 15, 2023 1:13 am
Replies: 2
by Nate22huckster » Sun Mar 12, 2023 9:21 pm

First post

Looking for good 1923-1927 style “u” shaped shackles that aren’t obround and worn out and have good threads. I’d consider buying individual shackles or front/rear sets. Picture for reference. Thanks!

5DA3168C-124A-47DD-B10E-04D68B8257E3.jpeg

Last post

Got set of fronts need cotter pins hole correctly drilled got them in a trade
Make an offer
Dm me if interested
thanks

2 Replies

1073 Views

Last post by Nv Bob
Wed Mar 15, 2023 1:13 am
FOR SALE - THE LINCOLN GEAR SHIFT HOLDS LOW GEAR NEW OLD STOCK PATENTED 1922

Last post by South park zephyr « Tue Mar 14, 2023 10:04 pm
Replies: 1
by Jay In Northern Ca. » Tue Mar 14, 2023 8:03 pm

First post

This is a handy new old stock accessory item ready to bolt onto your Model T. It allows you to hold low gear for a prolonged time without holding your foot down on the pedal. Comes with a copy of the original installation instructions. Asking $120 plus postage.
The Lincoln Gear Shift 1.jpg The Lincoln Gear Shift 2.jpg The Lincoln Gear Shift 3.jpg...

Last post

Email sent

1 Replies

830 Views

Last post by South park zephyr
Tue Mar 14, 2023 10:04 pm
Pasco Wire Wheels and Hubs

Last post by NoelChico « Tue Mar 14, 2023 6:03 pm
Replies: 3
by namdc3 » Tue Mar 07, 2023 8:39 pm

First post

Two Pasco wheels and two hubs with nuts but no caps. One wheel is missing one spoke. I'm happy to answer any questions I can. Pick up in Kansas City metro area or free delivery to Chickasha. $1000.

IMG-9158.png IMG-9159.png IMG-9160.png IMG-9166.png

Last post

For what it's worth, spokes are available at Buchanon Spoke and Rim, Inc.

3 Replies

1655 Views

Last post by NoelChico
Tue Mar 14, 2023 6:03 pm
FOR SALE -ULCO FORD HEADLIGHT EQUALIZER FOR MODEL T'S WITH MAGNETO HEADLIGHTS NOS IN THE ORIGINAL BOX

Last post by Jay In Northern Ca. « Tue Mar 14, 2023 4:58 pm

by Jay In Northern Ca. » Tue Mar 14, 2023 4:58 pm

Over a hundred years old new in the original box. Measures 4 x2 x2 . Asking $55 plus postage.
equalizer 1.jpg equalizer 2.jpg equalizer 3.jpg equalizer 4.jpg

email address below and NOT the personal messaging system to contact me, Thanks!

email.jpg

0 Replies

662 Views

Last post by Jay In Northern Ca.
Tue Mar 14, 2023 4:58 pm
1911 Holley 4500 Carburetor - Sold

Last post by RGould1910 « Tue Mar 14, 2023 3:59 pm
Replies: 1
by Ashley » Mon Mar 13, 2023 1:56 pm

First post

An original 1911 Holley 4500 carburetor. The carburetor we are offering is all brass, complete and in very good condition. The levers and adjustment screw move freely, and the float also free. It can easily be restored to show quality. $1750 plus shipping. Please contact Lang's Old Car Parts at 1-800-872-7871 and mention the MTFCA forum....

Last post

Email sent

1 Replies

967 Views

Last post by RGould1910
Tue Mar 14, 2023 3:59 pm
FS ACCESSORY ALUMINUM STEP PLATE SET

Last post by Mark Chaffin « Tue Mar 14, 2023 3:13 pm
Replies: 1
by Mark Chaffin » Mon Mar 13, 2023 5:46 pm

First post

Unusual aluminum step plate set with mounting hardware. Will require polishing. Price is $40.00 for the pair plus $17.10 domestic flat rate shipping. Mark Chaffin (951) 805-0928.

Step Plates.jpg

Last post

Sold to Steve.

1 Replies

712 Views

Last post by Mark Chaffin
Tue Mar 14, 2023 3:13 pm
Seeking Horn Switch Internals

Last post by jab35 « Tue Mar 14, 2023 12:45 pm

by jab35 » Tue Mar 14, 2023 12:45 pm

I'm looking for the battery horn switch 'guts' for my '26, the Bakelite cylinder with the horn wire connections on one end and the brass switch contacts on the other. I have a NOS horn button and mount. I know the complete assembly repro horn switches are available and I can go that route, but all I really need is the electrical part. Thanks,...

0 Replies

590 Views

Last post by jab35
Tue Mar 14, 2023 12:45 pm
For Sale - Rocky Mountain Brake Set for 1926-27

Last post by gwk « Tue Mar 14, 2023 8:28 am
Replies: 5
by gwk » Sun Mar 05, 2023 6:23 pm

First post

For Sale: Rocky Mountain Brake Set for 1926-27 Model T for large brake drum. Excellent condition.
Price: $650.00
Will hold with deposit.
Free delivery to Chickasha, OK

Pictures attached.
IMG_7374.jpg IMG_7373.jpg IMG_7371.jpg

Last post

Sorry they have sold.

5 Replies

1749 Views

Last post by gwk
Tue Mar 14, 2023 8:28 am
SPOKEN FOR - SENG ACCESSORY EXTENDED HORN BUTTON FOR YOUR FORD NEW IN THE ORIGINAL BOX

Last post by Lawrence « Tue Mar 14, 2023 1:51 am
Replies: 1
by Jay In Northern Ca. » Wed Mar 08, 2023 5:19 pm

First post

Here's a great vintage as new accessory horn button that readily bolts to the steering column. It allows you to press the horn button without leaving your hand from the steering wheel. Asking $85 plus postage.
SENG HORN BUTTON 1.jpg SENG HORN BUTTON 2.jpg SENG HORN BUTTON mounted 1.jpg SENG HORN BUTTON mounted 2.jpg

Please use this
email...

Last post

I'm interested jay, if you happy sending to new zealand.
Thanks Chris Lawrence

1 Replies

861 Views

Last post by Lawrence
Tue Mar 14, 2023 1:51 am
WTB: Neway Valve and Seat Cutters

Last post by Ken Buhler « Tue Mar 14, 2023 12:34 am
Replies: 2
by Ken Buhler » Mon Mar 13, 2023 2:32 pm

First post

I'm looking for a Neway valve and seat cutter set with pilots. Please let me know what you have. Vin Tin Tin three sixty at gmail dot com
Ken

Last post

Thanks Scott,
I had a good visit with him tonight. I will order a set tomorrow.

2 Replies

877 Views

Last post by Ken Buhler
Tue Mar 14, 2023 12:34 am
Modern axle bearings for sale

Last post by Nate22huckster « Mon Mar 13, 2023 9:11 pm
Replies: 1
by Nate22huckster » Mon Mar 13, 2023 8:02 pm

First post

I bought these for a project that I never completed. Brand new never used. Model T ranch part # 1050. Was about $225 when I bought it. Will sell for $180 shipping included to the lower 48. Thank you

3193E1BB-0070-40F2-B698-3E21EA5FFB71.jpeg

3193E1BB-0070-40F2-B698-3E21EA5FFB71.jpeg

Last post

Pending sale

1 Replies

887 Views

Last post by Nate22huckster
Mon Mar 13, 2023 9:11 pm
Accessory tie rod and wishbone caps SOLD

Last post by Layden Butler « Mon Mar 13, 2023 8:14 pm

by Layden Butler » Mon Mar 13, 2023 8:14 pm

Set of bodies for accessory spring loaded wishbone and tie rod ends,

0 Replies

735 Views

Last post by Layden Butler
Mon Mar 13, 2023 8:14 pm
Outside oiler fittings brass F/S

Last post by Layden Butler « Mon Mar 13, 2023 7:52 pm

by Layden Butler » Mon Mar 13, 2023 7:52 pm

Pair of original era accessory outside oiler fittings. $35 pair, domestic postage $10.

0 Replies

748 Views

Last post by Layden Butler
Mon Mar 13, 2023 7:52 pm
FS MISCELLANEOUS LOT #1

Last post by Mark Chaffin « Mon Mar 13, 2023 7:18 pm
Replies: 3
by Mark Chaffin » Mon Mar 13, 2023 5:53 pm

First post

Miscellaneous parts as described below. Domestic shipping extra. Mark Chaffin (951) 805-0928

Lot 1.jpg
1. Ball Bearing Fourth Main New $35.00 plus $10.20 domestic shipping
2. Brake cam and arm set (26/27) $35.00 plus $10.20 domestic shipping. SOLD
3. Universal Joint Ford script excellent condition $75.00 plus $10.20 domestic shipping. SOLD
4....

Last post

#4 sold to Rich.

3 Replies

965 Views

Last post by Mark Chaffin
Mon Mar 13, 2023 7:18 pm
FS DIFFERENTIAL ASSEMBLY

Last post by Mark Chaffin « Mon Mar 13, 2023 6:31 pm
Replies: 1
by Mark Chaffin » Mon Mar 13, 2023 6:06 pm

First post

One excellent rear axle differential assembly. Since I can't be certain this is NOS, I'll just say it is in outstanding overall condition. Doubt you will find one of these in better condition. Price is $175.00 plus $17.10 domestic shipping. Mark Chaffin (951) 805-0928 SOLD *SOLD*SOLD

Dif 1.jpg

Dif 2.jpg

Dif 3.jpg

Dif 4.jpg

Last post

Differential has been sold.

1 Replies

676 Views

Last post by Mark Chaffin
Mon Mar 13, 2023 6:31 pm
FS RUCKSTELL SHIFT LEVERS

Last post by Mark Chaffin « Mon Mar 13, 2023 6:09 pm
Replies: 2
by Mark Chaffin » Mon Mar 13, 2023 5:49 pm

First post

Two Ruckstell shift levers. Prices and shipping as indicated below. Mark Chaffin (951) 805-0928

Ruckstell Shift Levers.jpg
#1 has been modified $125.00 plus $22.80 domestic shipping
#2 Late style with spine for easy adjustment $150.00 plus $22.80 domestic shipping SOLD

Last post

Marty email sent.

2 Replies

911 Views

Last post by Mark Chaffin
Mon Mar 13, 2023 6:09 pm
FS - 1911 Torpedo/Open Runabout Floorboards - Free shipping, see pictures

Last post by ahovey « Mon Mar 13, 2023 1:52 pm
Replies: 4
by ahovey » Mon May 23, 2022 12:25 pm

First post

Have a set of new floorboards I purchased at Luray last year that I don’t need anymore. Made by Jonathan Anderson for an ‘11 Torpedo. Would like to get back what I paid for them, $210. Willing to ship domestically at my expense.

Feel free to reach out.

Thanks,
Austin

Last post

Back to the top, this is $15-$45 less what is seen online and the ride is free.

4 Replies

1976 Views

Last post by ahovey
Mon Mar 13, 2023 1:52 pm
WTB: 1926-27 Ignition Switch Assembly

Last post by TRDxB2 « Mon Mar 13, 2023 11:27 am
Replies: 4
by ArthurB » Sun Mar 12, 2023 9:45 pm

First post

Looking for a usable 1926-27 ignition switch assembly. The reproduction one only lasted a couple of years, looking for an original this time.

Last post

Arthur,
I posted a 26-7 switch in the classifieds January 10, 2023. Its still for sale. Do a search in the classifieds and see if it is what you need. Price is negotiable.

Arthur
Here is the link to Rick's switch that he posted

4 Replies

1247 Views

Last post by TRDxB2
Mon Mar 13, 2023 11:27 am
EARLY NH STRAIGHT THRU

Last post by David Babcock « Sun Mar 12, 2023 7:42 pm

by David Babcock » Sun Mar 12, 2023 7:42 pm

THIS ONE SHOWS NO WEAR, HAS CAST BRASS LEVERS. CLEAN BOWL WITH CORK FLOAT THAT LOOKS GOOD. $289. SHIPPED IN USA.

0 Replies

879 Views

Last post by David Babcock
Sun Mar 12, 2023 7:42 pm
1915 Model T Ford Car

Last post by TXGOAT2 « Sun Mar 12, 2023 4:25 pm
Replies: 12
by Claytonhackett » Sat Mar 11, 2023 7:02 pm

First post

1915 Model T Ford. The 1915 Model T Ford was manufactured and sold in the late 1915. There were 989 built that were all aluminum rear body panel. In mid 1915 Ford changed to a steel body but the body style didn't change through 1916. This is the all steel body which is the 1916 and the last year of the brass radiator and headlights. There were...

Last post

Incorrect hose clamps... not worth a nickle over $2500...

12 Replies

2587 Views

Last post by TXGOAT2
Sun Mar 12, 2023 4:25 pm
1923 ROADSTER

Last post by schlegggg@aol.com « Sun Mar 12, 2023 3:25 pm
Replies: 2
by schlegggg@aol.com » Sun Mar 12, 2023 3:14 pm

First post

1923 Roadster. Been in the family for almost 70 years. Complete body restoration and top a few years ago. Now has a few hundred miles on a rebuilt engine. Rebuilt suspension and running gear with a new roller bearing differential. New interior, mats, and top. New wiring, coils, starter, and 6v generator. A regular driver. Looks good and has won a...

Last post

1923 Roadster. Been in the family for almost 70 years. Complete body restoration and top a few years ago. Now has a few hundred miles on a rebuilt engine. Rebuilt suspension and running gear with a new roller bearing differential. New interior, mats, and top. New wiring, coils, starter, and 6v generator. A regular driver. Looks good and has won a...

2 Replies

863 Views

Last post by schlegggg@aol.com
Sun Mar 12, 2023 3:25 pm
Model T Racing/Speedster Engine *SOLD*

Last post by Dan Hatch « Sun Mar 12, 2023 2:21 pm
Replies: 9
by jakeknapp29 » Sat Mar 11, 2023 3:48 pm

First post

I am selling my T racing engine that I was building for a speedster/hill climber. Unfortunately I will not be able to finish my project. This is a 26/27 block with all the work done. Insert main bearings and rod bearings. Model A counterbalanced crankshaft and Model A camshaft. Bored out with Buick pistons installed. Hard valve seats. 1.7 intakes,...

Last post

Which Buick pistons are those? Thanks Dan

9 Replies

2612 Views

Last post by Dan Hatch
Sun Mar 12, 2023 2:21 pm
FS LOT #2 (REDUCED PRICES)

Last post by Mark Chaffin « Sun Mar 12, 2023 1:52 pm
Replies: 6
by Mark Chaffin » Fri Mar 10, 2023 3:22 pm

First post

A variety of hard to find items available for purchase. Items are as described below. Domestic shipping USPO Priority Mail Flat Rate will be an additional charge as described below. Message me or call (951) 805-092eight.

#1 Early aluminum Winfield carburetor Model 4V nice snug throttle barrel was $450.00 now $400.00 plus $22.80 shipping.
#2...

Last post

Bump to top.

6 Replies

1932 Views

Last post by Mark Chaffin
Sun Mar 12, 2023 1:52 pm
Transport to chick

Last post by tman12 « Sun Mar 12, 2023 12:44 pm
Replies: 1
by tman12 » Fri Mar 10, 2023 6:49 pm

First post

Hi From Iowa to All you Great Ole Car Folks! I desperately need help getting a roadster body on a 4x8 rolling pallet transported from Chualar CA to the Chickashaw swap in Ok. There are also 5 wire wheels & 4 hubs that need hauling. If there is any way you can help I'm willing to pay anything you feel is fair. If there is any way you can help me I...

Last post

Bump - Help!

1 Replies

871 Views

Last post by tman12
Sun Mar 12, 2023 12:44 pm
Gas headlamp reflector mounting wedges SOLD

Last post by Layden Butler « Sun Mar 12, 2023 12:28 pm
Replies: 2
by Layden Butler » Sun Dec 11, 2022 7:34 pm

First post

Wedges to mount glass reflectors in gas headlamps.

Last post

Sorry Joe but they are sold.

2 Replies

1007 Views

Last post by Layden Butler
Sun Mar 12, 2023 12:28 pm
Transportation needed!

Last post by Belliott3 « Sun Mar 12, 2023 11:25 am
Replies: 2
by Belliott3 » Fri Mar 10, 2023 2:02 pm

First post

Is there anyone near metro Detroit that is planning on going to Chickasha that could pick up a set of Demountable’s for me? I’d gladly pay for your time. 586-651-5760 Bill

Last post

Bump to the top

2 Replies

846 Views

Last post by Belliott3
Sun Mar 12, 2023 11:25 am
WTB Saddle arms and Saddles for 1924 Roadster

Last post by Humblej « Sun Mar 12, 2023 9:01 am
Replies: 2
by Humblej » Sat Mar 04, 2023 7:45 am

First post

WTB a pair of straight saddle arms and saddles for a 1924 roadster. The saddles hold the top bows when the top is in the down position. Roadster and touring should be the same. My body bracket has a 5/8-11 thread so that is the size I need. Looking for originals, not a repop.

Last post

Still looking, back to the top.

2 Replies

657 Views

Last post by Humblej
Sun Mar 12, 2023 9:01 am
Allen HCCT Meter Mount Plate.

Last post by BE_ZERO_BE « Sat Mar 11, 2023 9:48 pm

by BE_ZERO_BE » Sat Mar 11, 2023 9:48 pm

Allen HCCT meter mount plates are now available.
I had some cast recently (raw castings shown).
These are cast from aluminum.
Original ones were cast iron (or steele).
Drilled, taped and ready for meters.
This part is commonly missing or broken.

$55.00

Bob Cascisa
RMC Engineering Services LLC
360-620-3226
bcascisa@comcast.net

IMG_0454(1).JPG...

0 Replies

644 Views

Last post by BE_ZERO_BE
Sat Mar 11, 2023 9:48 pm
FS LOT #3

Last post by Mark Chaffin « Sat Mar 11, 2023 5:59 pm
Replies: 9
by Mark Chaffin » Fri Mar 10, 2023 3:28 pm

First post

A variety of new items available for purchase. Items are as described below. Domestic shipping USPO Priority Mail Flat Rate will be an additional charge of $10.20. Message me or call (951) 805-092eight.

#1 Dog Bone Radiator Cap Hex Chrome (Not Drilled) Vintique$30.00 SOLD
#2 Dog Bone Radiator Cap Hex Chrome (Drilled) Vintique $30.00 SOLD
#3...

Last post

#2 and #6 sold to Ed.

9 Replies

2431 Views

Last post by Mark Chaffin
Sat Mar 11, 2023 5:59 pm
Horn issues

Last post by Allan « Sat Mar 11, 2023 5:48 pm
Replies: 4
by Reno Speedster » Sat Mar 11, 2023 2:17 pm

First post

I installed the horn I got today and when I press the button I get one very short sound, so the ground is working. I took the cover off and it is all clean, no rust. I can’t see the diaphragm under the cover but it looks ok down the bell. Is there an adjustment that I need to do?

Last post

But battery horns should not! This battery horn most likely responded to adjustment of the weight on the cross spring.

Allan from down under.

4 Replies

1007 Views

Last post by Allan
Sat Mar 11, 2023 5:48 pm
T frame, Front & Rear End

Last post by jakeknapp29 « Sat Mar 11, 2023 4:29 pm

by jakeknapp29 » Sat Mar 11, 2023 4:29 pm

Pretty nice Model T frame, front end and rear end. Surface rusty but not terrible. $300 OBO

0 Replies

773 Views

Last post by jakeknapp29
Sat Mar 11, 2023 4:29 pm
FS LOT #1

Last post by Mark Chaffin « Sat Mar 11, 2023 2:02 pm
Replies: 4
by Mark Chaffin » Fri Mar 10, 2023 3:17 pm

First post

A variety of hard to find items available for purchase. Items are as described below. Shipping USPO Priority Mail Flat Rate will be an additional charge of $10.20. Message me or call (951) 805-092eight.

#1 Scandinavia Band Lining Set (26/27). No longer available $100.00 SOLD
#2 Scandinavia Band Lining Set (26/27). No longer available $100.00...

Last post

#1 and #2 sold to Rick.

4 Replies

1422 Views

Last post by Mark Chaffin
Sat Mar 11, 2023 2:02 pm
How to Unstrangle your Kingston L-4... The New Kingston Super Valve - sold out

Last post by Scott_Conger « Fri Mar 10, 2023 7:45 pm
Replies: 6
by Scott_Conger » Thu Mar 09, 2023 1:32 pm

First post

Once I have gaskets in hand, I will have 10 of these Super Valves available for purchase. These may be the first of many or the last of a few, depending on response.

Improvements over the stock valve are as follows:

throughput is massively greater than a stock valve
has a superior Viton tip to seal far better than traditional steel tips...

Last post

All gone

thank you very much

6 Replies

1514 Views

Last post by Scott_Conger
Fri Mar 10, 2023 7:45 pm
SPOKEN FOR - PENBERTHY IN TANK DIAL READ OUT GAS GAUGE FOR SQUARE TANK ON FORD COUPE & SEDAN NOS IN THE ORIGINAL BOX

Last post by TXGOAT2 « Fri Mar 10, 2023 7:18 pm
Replies: 1
by Jay In Northern Ca. » Fri Mar 10, 2023 6:04 pm

First post

This is an excellent in the tank gas gauge for your Model T Coupe or Sedan. Unlike many you don't have to remove it from the tank to add gas. It firmly bolts into the tank and uses a standard Model T gas cap. This makes it easy to see at a glance how much gas you have without using a stick. Quality control tag in the box has the date 8/10/21 in...

Last post

That's a high grade item. Penberthy made a lot of steam items.

1 Replies

740 Views

Last post by TXGOAT2
Fri Mar 10, 2023 7:18 pm
WTB 1928 Whippet radiator cap

Last post by jwrightjr « Fri Mar 10, 2023 6:43 pm
Replies: 3
by jelenbaas » Tue Mar 07, 2023 5:47 pm

First post

Neck is 1 15/16 inches in diameter and the pitch is approximately 16 tpi.

Last post

Found this also without looking too hard. Just needs to be spun back down.

3 Replies

1177 Views

Last post by jwrightjr
Fri Mar 10, 2023 6:43 pm
Chickasha swapmeet

Last post by George House « Fri Mar 10, 2023 5:31 pm
Replies: 1
by Gene_French » Fri Mar 10, 2023 10:27 am

First post

am taking orders for items to be picked up at the swapmeet ... you can save a bunch on postage given the current postal rates ... the cost of postage on a linebore unit is at or over $100 in lower 48 states ... the smaller items can be posted in the flat rate packages ,BUT , still pricey ...i can also bore ball caps to your specific size for...

Last post

Are you still buying ball caps ?

1 Replies

935 Views

Last post by George House
Fri Mar 10, 2023 5:31 pm
Stud buckles for early tops NOS F/S

Last post by havnfun « Fri Mar 10, 2023 4:07 pm
Replies: 3
by Layden Butler » Sun Jan 15, 2023 7:39 pm

First post

These are stud buckles to adjust the length of the top strap to either radiator base or windshield on early Model Ts, early tops were made up with this style fitting. They are New Old Stock and sold as a pair ( one for each strap). They are made of iron and painted with black Japan enamel. $35 pair, domestic postage $10.

Last post

Layden,

Sent you an email

3 Replies

1349 Views

Last post by havnfun
Fri Mar 10, 2023 4:07 pm
FS 26/27 LUG NUT SET

Last post by Mark Chaffin « Fri Mar 10, 2023 3:51 pm
Replies: 2
by Mark Chaffin » Fri Mar 10, 2023 3:44 pm

First post

These were produced approximately 30 years ago and are no longer in production. One set of Nickle wire wheel lug nuts. I only have the one set. Price is $200.00 plus $10.20 shipping.

Lugs 2.jpg

Lugs 1.jpg

Last post

Pending sold to Richard.

2 Replies

949 Views

Last post by Mark Chaffin
Fri Mar 10, 2023 3:51 pm
Earlier front motor mount parts Sold

Last post by Layden Butler « Fri Mar 10, 2023 3:50 pm

by Layden Butler » Fri Mar 10, 2023 3:50 pm

This group of parts

0 Replies

643 Views

Last post by Layden Butler
Fri Mar 10, 2023 3:50 pm
Schrader tire tube stem cover set F/S

Last post by Layden Butler « Fri Mar 10, 2023 3:38 pm

by Layden Butler » Fri Mar 10, 2023 3:38 pm

Set of 5 covers and nuts $45, domestic postage $10.

0 Replies

612 Views

Last post by Layden Butler
Fri Mar 10, 2023 3:38 pm
Prest-o-lite valve wrenches both SOLD

Last post by Tbird « Fri Mar 10, 2023 2:55 pm
Replies: 1
by Tbird » Fri Mar 10, 2023 2:36 pm

First post

These are period valve wrenches with the Prestolite insignia on them in a script font. They fit the square valve to crack open the tank to your prestolite tank. I have 2 of them $15 a piece plus shipping

mikebird@lifeattheridge.net or five (7) four 5 (8) four 6 seven (44)

IMG_2184.JPG

Last post

Bottom one sold- Holding for Rick

1 Replies

668 Views

Last post by Tbird
Fri Mar 10, 2023 2:55 pm
Prestolite Decal- SOLD

Last post by Tbird « Fri Mar 10, 2023 2:45 pm

by Tbird » Fri Mar 10, 2023 2:45 pm

Here is a brand-new decal never been mounted for an early prestolite tank. This comes with two decals. 1 is the the main decal that has all the information and the second is the long prestolite logo.
$25 plus shipping

mikebird@lifeattheridge.net or five (7) four 5 (8) four 6 seven (44)

IMG_2185.JPG

0 Replies

588 Views

Last post by Tbird
Fri Mar 10, 2023 2:45 pm
Prestolite-Regulator SOLD

Last post by Tbird « Fri Mar 10, 2023 2:32 pm

by Tbird » Fri Mar 10, 2023 2:32 pm

Here is an early very nice prestolite regulator FS. The threads are great, the valve turns very nice and presto lite wording is crisp. Just a little grungy but should clean up very nice.
$125 plus shipping

mikebird@lifeattheridge.net or five (7) four 5 (8) four 6 seven (44)

IMG_2181.JPG

IMG_2181.JPG

IMG_2181.JPG

0 Replies

612 Views

Last post by Tbird
Fri Mar 10, 2023 2:32 pm
SOLD Steering Wheel - 17" Guardian unlocking wood steering wheel with center horn button

Last post by South park zephyr « Fri Mar 10, 2023 11:50 am
Replies: 4
by MAG » Sun Jan 08, 2023 1:20 pm

First post

17” Guardian unlocking wood steering wheel with center horn button. This wheel has a key to unlock the steering wheel so it free wheels and cannot be steered as to prevent theft. This was fully restored and new nickel plating applied. These are rare and can be yours for $400 and $35 shipping east of the Rockies. markpaulagember AT aol DOT com

Last post

Thank you Mark for the help with the wheel, Other than UPS doing their part to muck it up, I am very happy with it.

4 Replies

1555 Views

Last post by South park zephyr
Fri Mar 10, 2023 11:50 am
For Sale: original commercial Rajo head

Last post by Ahr « Thu Mar 09, 2023 11:32 pm

by Ahr » Thu Mar 09, 2023 11:32 pm

Fir sale is an original commercial Rajo head. The head has been baked, blasted and magna fluxed. It looks to have been decked as well. There are two small cracks on the deck surface that should not hurt anything. The original intake/exhaust manifold is included. Someone changed the flange to suit their needs. I have no other parts for this head. I...

0 Replies

979 Views

Last post by Ahr
Thu Mar 09, 2023 11:32 pm
For Sale:Set of 26-27 Scandinavia band linings

Last post by Ahr « Thu Mar 09, 2023 11:20 pm

by Ahr » Thu Mar 09, 2023 11:20 pm

This is a complete set if linings for a 26-27 transmission. You will receive one wide brake band and two narrow bands plus the brass rivets. Thus set looks to be in good shape and is 20+ years old. The set is $110 plus shipping. Delivery to Chickasha is possible. Please email through the forum as I did not check pm's often.

0 Replies

682 Views

Last post by Ahr
Thu Mar 09, 2023 11:20 pm
For Sale: Set of narrow Scandinavia bands

Last post by Ahr « Thu Mar 09, 2023 11:14 pm

by Ahr » Thu Mar 09, 2023 11:14 pm

One set of Scandinavia band linings, look to be in good condition. Will include brass rivets for mounting. These bands are likely 20+years old. $110 plus shipping. Delivery to Chickasha is possible. Please email through the forum. I do not check pm's.

0 Replies

614 Views

Last post by Ahr
Thu Mar 09, 2023 11:14 pm
SPOKEN FOR - JERICHO CABLE OPERATED TAIL PIPE EXHAUST WHISTLE

Last post by Dan McEachern « Thu Mar 09, 2023 10:09 pm
Replies: 1
by Jay In Northern Ca. » Thu Mar 09, 2023 5:18 pm

First post

Cast aluminum, Model T size, in excellent working condition. Marked Jericho Horn Number 0 Patented July 2nd 1912. Asking $155 plus postage.
Jericho 00 Whistle 1.jpg Jericho 00 Whistle 2.jpg

Please use this email address below and NOT the personal messaging system to contact me, Thanks! email.jpg

Last post

Nice one Jay- those are hard to find in good condition!!

1 Replies

775 Views

Last post by Dan McEachern
Thu Mar 09, 2023 10:09 pm
SPOKEN FOR - INERTIA ACTIVATED COP RAISES ARMS TO SIGNAL"STOP"

Last post by Harry Lillo « Thu Mar 09, 2023 7:26 pm
Replies: 1
by Jay In Northern Ca. » Thu Mar 09, 2023 5:36 pm

First post

This a a novel whimsy stop signal for mounting on the rear of your T. When you apply the brake inertia acts on the counter weight attached to the cops arms making them raise. The arms lower when the car is stopped, or forward motion is regained. Asking $125 plus postage.
Inertia cop 1.jpg Inertia cop 3.jpg Inertia cop 4.jpg

Please use this...

Last post

Jay,
I sent you an email note earlier on the policeman.
Harry

1 Replies

997 Views

Last post by Harry Lillo
Thu Mar 09, 2023 7:26 pm
Ford O SOLD

Last post by Melba Nolan « Thu Mar 09, 2023 6:37 pm
Replies: 3
by Melba Nolan » Fri Dec 23, 2022 10:48 pm

First post

For sale: Ford O license plate and tail light holder $45 plus postage
20221205_123235.jpg 20221205_123228.jpg 20221205_123219.jpg

Last post

move to top

3 Replies

1968 Views

Last post by Melba Nolan
Thu Mar 09, 2023 6:37 pm
KR Wilson tools

Last post by Modeltmike « Thu Mar 09, 2023 5:08 pm

by Modeltmike » Thu Mar 09, 2023 5:08 pm

This is an assortment of tools I’m taking to Chickasha. I would like to trade for transmission tools and other model T special tools. Would also consider selling. Not wanting to ship them at this point. Thanks

0 Replies

873 Views

Last post by Modeltmike
Thu Mar 09, 2023 5:08 pm
Wanted: Early Starter Switches

Last post by RajoRacer « Thu Mar 09, 2023 3:59 pm
Replies: 12
by RajoRacer » Wed Feb 08, 2023 11:09 am

First post

Looking to purchase several early foot switches (photo below) that have 2 screws holding the plunger to the base plate for a rebuilding project. Will also consider the later type with the fold-over tabs IF they've not already been bent over before - quite easy to recognize. Please contact me through the Forum unless you have my email.

Last post

Back up once again - nobody has any in their swap meet stuff ?

12 Replies

2701 Views

Last post by RajoRacer
Thu Mar 09, 2023 3:59 pm
1925 quarter windows and window regulators

Last post by mike catlin « Thu Mar 09, 2023 3:48 pm
Replies: 11
by mike catlin » Mon Mar 06, 2023 11:28 am

First post

For sale 1925 quarter windows includes all trim and pieces shown. 150.00 Also two front window regulators 50.00 a piece contact me at 58six 306 one887

Last post

These items are SOLD

11 Replies

2120 Views

Last post by mike catlin
Thu Mar 09, 2023 3:48 pm
SOLD- FS Ruckstell Large Drum Rebuilt Rear Axle Assembly

Last post by MAG « Thu Mar 09, 2023 10:28 am
Replies: 1
by MAG » Wed Mar 08, 2023 7:49 pm

First post

o Fully rebuilt Ruckstell large drum rear axle assembly including a Ruckstell center shifter & control rod, relined emergency brake shoes with rods & and supports – painted gloss black – full assembly ready to install.
o The total rebuild included all NEW: standard ring & pinion, axle shafts, hardened bearing sleeves, inner and outer modern...

Last post

Updated price to $3850 due to typo in original add.

1 Replies

1242 Views

Last post by MAG
Thu Mar 09, 2023 10:28 am
WTB: Ford Script Rear Hub Puller

Last post by snowt « Thu Mar 09, 2023 9:42 am
Replies: 6
by snowt » Sat Feb 11, 2023 8:34 am

First post

Hello all. I'm looking for a Ford script rear hub puller with damaged or stripped threads (the threads that thread on to the hub). I'm using this as a donor for a non-model t project and need to bore out the ID and rethread it, and just can't bring myself to ruin a perfectly good hub puller.

Has to have good threads in the jack screw.

Thank you.

Last post

Bump......

6 Replies

1620 Views

Last post by snowt
Thu Mar 09, 2023 9:42 am
WTB thunderbolt overhead valve cover

Last post by frontyboy « Wed Mar 08, 2023 11:12 pm
Replies: 2
by Jakekj » Wed Mar 08, 2023 11:30 am

First post

Wanted thunderbolt valve cover for overhead conversion

Last post

On my 28 Chev 4 cylinder sprint car I had a new Jern valve cover and it sorta fit the cylinder head machined surface. I used black gasket sealer and fashioned rubberized damn seal inside the oil galley up against the boss for the original valve cover to sit on.

I had no oil leaks and was able to oil rockers often and keep the engine clean....

2 Replies

970 Views

Last post by frontyboy
Wed Mar 08, 2023 11:12 pm
REQUEST

Last post by dobro1956 « Wed Mar 08, 2023 11:09 pm
Replies: 2
by Mark Chaffin » Tue Mar 07, 2023 10:04 am

First post

Anyone from California driving to Chickashae for the annual swap meet that has room for a K.R. Wilson tool? Mark Chaffin (951)805-0928

Last post

To the top for Mark

2 Replies

1197 Views

Last post by dobro1956
Wed Mar 08, 2023 11:09 pm
WTB 26-27 Transmission brake drum + shaft

Last post by Jwenger « Wed Mar 08, 2023 7:55 pm

by Jwenger » Wed Mar 08, 2023 7:55 pm

Looking for a usable late 26-27 brake drum and also a transmission shaft. Thanks

0 Replies

624 Views

Last post by Jwenger
Wed Mar 08, 2023 7:55 pm
SPOKEN FOR - CROW MECHANICAL FAN BELT FOR FORD CARS NEW OLD STOCK IN THE ORIGINAL BOX WITH INSTRUCTIONS

Last post by Michael Peternell « Wed Mar 08, 2023 7:50 pm
Replies: 1
by Jay In Northern Ca. » Wed Mar 08, 2023 6:24 pm

First post

This is a never used, in the original box accessory mechanical fan belt made for the Ford Model T. The box is shelf worn and missing a flap. Comes with the original paper work. Asking $65 plus postage.
Crowe Fan belt 1.jpg Crowe fan belt 2.jpg Crowe fan belt 3.jpg
Please use this email address below and NOT the personal messaging system to...

Last post

I'll bite! Missed out too many times!

1 Replies

936 Views

Last post by Michael Peternell
Wed Mar 08, 2023 7:50 pm

New Topic

10413 topics

Page 89 of 105
- Jump to page:
Previous
1
…
87
88
89
90
91
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum