How do you protect your woodwork?

Posts that have nothing to do with the Model T. You can post here or OT posts will be moved here.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic
User avatar

Topic author
Rata Road
Posts: 208
Joined: Mon Mar 25, 2019 11:58 am
First Name: Kevin
Last Name: Weeds
* REQUIRED* Type and Year of Model Ts owned: 1923 Depot Hack, 1927 Coupe & 1914 Runabout
Location: New Zealand
Board Member Since: 2015

How do you protect your woodwork?

Post by Rata Road » Fri Jan 13, 2023 3:36 pm

Hi Guys off topic this time, I recently purchased a 1951 Rover 75 P4 know as a "Cyclops" for obvious reasons. Previous owner has passed away and had it for 60 years and it was always garaged. The interior woodwork is great and I want to keep it that way. Sun exposer when out and about is my main concern.
What do you suggest?

Thanks
Attachments
20221015_095108 s.jpg
20221015_095108 s.jpg (36.77 KiB) Viewed 1849 times
1870000975 ss.jpg
Top
User avatar

Rich Eagle
Posts: 6895
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID

Re: How do you protect your woodwork?

Post by Rich Eagle » Fri Jan 13, 2023 6:04 pm

I just clean mine with soap and water. There are dozens of commercial products for dashes out there. A good furniture polish would work too.
Others may share their favorite if they run across this.
Rich
When did I do that?
Top

TXGOAT2
Posts: 7391
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
Board Member Since: 2021

Re: How do you protect your woodwork?

Post by TXGOAT2 » Fri Jan 13, 2023 6:16 pm

Wood boat people may have some good tips.
Top

Loftfield
Posts: 271
Joined: Sun Jan 06, 2019 1:26 pm
First Name: Thomas
Last Name: Loftfield
* REQUIRED* Type and Year of Model Ts owned: 1912 Touring, 1912 Express Pick-up
Location: Brevard, NC, USA

Re: How do you protect your woodwork?

Post by Loftfield » Sat Jan 14, 2023 8:01 am

There are any number of spar varnishes with good UV protection, used on wooden boats when I had some. However, applying same will degrade the historical value of what is there now. My suggestion is to make up your own "polish" consisting of half spirits of gum turpentine, half boiled linseed oil. Rub on let sit a while rub off. If you want a glossier finish add some shaved bees wax to the polish mix, stir until dissolved. The bees wax will then require buffing after you have removed the excess polish. This mixture feeds the wood as well as the external finish, should prevent cracking of wood, crazing of the finish. Used on my antique furniture to keep it as original as possible.
Top
User avatar

Kaiser
Posts: 1102
Joined: Mon Jan 07, 2019 5:32 am
First Name: Leo
Last Name: van Stirum
* REQUIRED* Type and Year of Model Ts owned: 1923 Huckster, '66 CJ5 daily driver
Location: Netherlands
Board Member Since: 2016

Re: How do you protect your woodwork?

Post by Kaiser » Mon Jan 16, 2023 9:02 am

Just use any regular furniture wax, should work fine.
It was probably waxed in the past so refinishing with some other product might give problems.
Wax will work fine on anything without reacting with the finish that is on there now.
Be aware that if you want to refinish with something you may have to sand it first and the veneer used on British cars is litteraly paperthin !
Great car by the way !
When in trouble, do not fear, blame the second engineer ! 8-)
Leo van Stirum, Netherlands
'23 Huckster, '66 CJ5 daily driver
Top
User avatar

A Whiteman
Posts: 1125
Joined: Sun Jan 06, 2019 3:36 pm
First Name: Adrian
Last Name: Whiteman
* REQUIRED* Type and Year of Model Ts owned: 1926 TT, 1923 Colonial Roadster, 1924 'Bullnose' Morris, 1925 'Bullnose' Morris, 1936 JD AR
Location: South Island, New Zealand

Re: How do you protect your woodwork?

Post by A Whiteman » Tue Jan 17, 2023 2:24 am

Great find Kevin,

Probably just use furniture polish. I assume she will remain garaged and not be left outside, so the exposure would be limited.
Top
User avatar

Topic author
Rata Road
Posts: 208
Joined: Mon Mar 25, 2019 11:58 am
First Name: Kevin
Last Name: Weeds
* REQUIRED* Type and Year of Model Ts owned: 1923 Depot Hack, 1927 Coupe & 1914 Runabout
Location: New Zealand
Board Member Since: 2015

Re: How do you protect your woodwork?

Post by Rata Road » Sun Jan 22, 2023 2:02 am

Great ideas & feedback guys.
It wont be veneer I think it is solid wood and yes it wont be left outside except when being used.

Thanks for your time

Kevin
Top
Post Reply Previous topicNext topic

Return to “OT - Off topic”