Hi:
Does anyone know if these are still available or who might have a few in stock?
I'm looking for a spare rim for my 26 Touring.
Thank you.
McLaren 30x3.5 Demountable Clinchers
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
OilyBill
- Posts: 641
- Joined: Sat Apr 25, 2020 3:51 pm
- First Name: William
- Last Name: May
- * REQUIRED* Type and Year of Model Ts owned: 1914 Runabout
- Location: Tucson, Arizona
Re: McLaren 30x3.5 Demountable Clinchers
My understanding is that Mark McLaren is still making the rims.
The gentleman who took over the McLaren Wire Wheel business apparently still buys the rims he uses, from Mark McClaren.
I need to contact Mark, but cannot find his phone number. I need 3 each 24" plain clincher rims for my 1910 Brush Gentleman's Runabout. It uses 30 X 3 clincher tires, instead of the smaller tires used on the normal Brush Runabout.
If you are able to contact Mark, please leave the info here, so I can contact him as well about my rim requirements.
Thanks!
The gentleman who took over the McLaren Wire Wheel business apparently still buys the rims he uses, from Mark McClaren.
I need to contact Mark, but cannot find his phone number. I need 3 each 24" plain clincher rims for my 1910 Brush Gentleman's Runabout. It uses 30 X 3 clincher tires, instead of the smaller tires used on the normal Brush Runabout.
If you are able to contact Mark, please leave the info here, so I can contact him as well about my rim requirements.
Thanks!
-
Rick_Rice
- Posts: 160
- Joined: Sun Jan 06, 2019 7:12 pm
- First Name: Rick
- Last Name: Rice
- * REQUIRED* Type and Year of Model Ts owned: 1925 TT Closed Cab Express
- Location: Gainesboro, TN
Re: McLaren 30x3.5 Demountable Clinchers
Try Langs,
I have a copy of their 2017 catalog and back then they listed the 30" x 3.5" demountable clinchers for $400.00 each plus shipping. If you are going to Luray, I believe Lands will be on site. Good hunting!
Kind Regards,
Rick Rice
I have a copy of their 2017 catalog and back then they listed the 30" x 3.5" demountable clinchers for $400.00 each plus shipping. If you are going to Luray, I believe Lands will be on site. Good hunting!
Kind Regards,
Rick Rice
-
meskhov
Topic author - Posts: 4
- Joined: Sun Oct 04, 2020 12:44 pm
- First Name: Michael
- Last Name: Gulbankian
- Location: southboro,MA
Re: McLaren 30x3.5 Demountable Clinchers
Rick:
I spoke with Lang's a few weeks ago and they only have the lesser quality New Zealand manufactured rims. The problem is the lug tabs are only butt-welded whereas Mclaren's were a through the slot from behind and then welded. A much stronger joint.
That's what I've been told.
Any help appreciated.
I spoke with Lang's a few weeks ago and they only have the lesser quality New Zealand manufactured rims. The problem is the lug tabs are only butt-welded whereas Mclaren's were a through the slot from behind and then welded. A much stronger joint.
That's what I've been told.
Any help appreciated.
-
meskhov
Topic author - Posts: 4
- Joined: Sun Oct 04, 2020 12:44 pm
- First Name: Michael
- Last Name: Gulbankian
- Location: southboro,MA
Re: McLaren 30x3.5 Demountable Clinchers
Does anyone know how to contact Mark McLaren to see if he still has any of these rims?
Thanks
Thanks
-
Kevin Pharis
- Posts: 1562
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: McLaren 30x3.5 Demountable Clinchers
it’s been over a year since I last tried... but they didn’t answer the phone back then either...?
-
mountain muncher
- Posts: 8
- Joined: Sat Feb 16, 2019 5:40 pm
- First Name: John
- Last Name: Rehberg
- * REQUIRED* Type and Year of Model Ts owned: 1913 open express
- Location: Springfield, NE
Re: McLaren 30x3.5 Demountable Clinchers
Have you tried Mike Lebsack, Vintage Wire Wheel, LLC? He bought out McLaren. He is in Iowa City, IA. (319) 430-4995. Lebsackmike@gmail.com
John
John
-
Kevin Pharis
- Posts: 1562
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: McLaren 30x3.5 Demountable Clinchers
Unless something has changed fairly recently... Mike bought McLaren Wheels from John McLaren (father) a number of years ago. Mark McLaren (son) makes (made?) the rims.mountain muncher wrote: ↑Tue Oct 20, 2020 9:57 pmHave you tried Mike Lebsack, Vintage Wire Wheel, LLC? He bought out McLaren. He is in Iowa City, IA. <a href="tel:(319) 430-4995">(319) 430-4995</a>. Lebsackmike@gmail.com
John
Mike may well have some insight tho... would be worth the call
-
Joe Reid
- Posts: 270
- Joined: Thu May 23, 2019 12:21 pm
- First Name: Joe
- Last Name: Reid
- * REQUIRED* Type and Year of Model Ts owned: 1919 Coupe, 1920 Roadster, 1923 Touring, 1924 Roadster, 1913 Racer
- Location: Almond WI
- Board Member Since: 2007
Re: McLaren 30x3.5 Demountable Clinchers
www.vintagewirewheel.com is the website. Saw one of his wheels in Sept. They are a thing of beauty.