- 05E9B951-7BFA-46D2-A362-B804E12C56B5.jpeg (14.82 KiB) Viewed 1173 times
- 575975E4-F31C-49F5-A301-4376828114EA.jpeg (16.6 KiB) Viewed 1173 times
- 81B8E965-1487-4146-BA4A-75C3F55939C3.jpeg (16.93 KiB) Viewed 1173 times
Thanks in advance .
Intake manifolds
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Oldrusty26
Topic author - Posts: 37
- Joined: Tue Jan 22, 2019 8:13 am
- First Name: Travis
- Last Name: Melnick
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu 27 Tudor 25 TT etc...
- Location: Waterford pa
- Board Member Since: 2012
Intake manifolds
Found these today during an outing on an old farm , hoping to get some information on them , intake manifolds , same spacing as the T , but like a lot of things , I’ve never seen them before , aftermarket ? Not ford ? Ideas ??
Thanks in advance .
Thanks in advance .
-
Scott_Conger
- Posts: 6605
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: Intake manifolds
Aftermarket...used for any number of updraft carbs where interference with a generator is not an issue. The bottom one is commonly found with Meyer updraft carbs.
If you ever sell them, I'd be interested.
If you ever sell them, I'd be interested.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured