What are you bringing to Luray?? Post it here to let us know.

Post by **James_Lyons-WV** » Sat Apr 08, 2023 10:28 am

If you are coming to Luray to sell your parts, post some details in this thread to give folks a teaser so everyone knows what you have.

Post by **sweet23** » Sat Apr 08, 2023 4:17 pm

I will be there, selling Model T parts, and Model T tools. Darryl Bobzin

CraneJon · Post by **CraneJon** » Sat Apr 08, 2023 5:54 pm

I am looking for a 1920''s front wishbone with a nice ball.
Jon Crane
cranejon@hotmail.co

Post by **Don Demio** » Sat Apr 08, 2023 6:28 pm

I will be selling assorted T parts and looking to buy Model T Keys.

Drive safe and C U there,

Don

Post by **James_Lyons-WV** » Sun Apr 09, 2023 8:14 am

I will be bringing the following:
- NOS Holley (Model S) 2-screw carburetor for someone who wants their 1913 to be complete and original.
- Restored 1915 version of the Holley G with steel bowl
- Wheel Bearings
- Useable Brass hub fan
- Rocky Mountain brakes (repro) - complete set, never used.
- Some Maxwell 2-cylinder parts.
- Other misc. Ford T parts.

If you have any questions, email me at: jlyons111@hotmail.com

Post by **mike catlin** » Sun Apr 09, 2023 8:25 am

1925 coupe interior parts including seats,seat box , windshield.

tom_strickling · Post by **tom_strickling** » Sun Apr 09, 2023 9:33 am

Simplex pull starter

Snowmobile Skis

Visor kits for 23-25 closed cars EXCELLENT reproduction.

Rverse Pedal Extensions in aluminum and BRASS

tom_strickling · Post by **tom_strickling** » Sun Apr 09, 2023 10:04 am

Should say ORIGINAL Model T Snowmobile conversion skis plus a Repro Snowmobile step

Post by **Original Smith** » Sun Apr 09, 2023 10:35 am

Wish I could join you this year!

Post by **James_Lyons-WV** » Sun Apr 09, 2023 4:17 pm

Miss seeing you Larry! Looking forward to hanging out in my barn with you in October!

Post by **Dan Hatch** » Mon Apr 10, 2023 9:55 am

Check my post on Loading the Trailer for Luray. Thanks Dan

Post by **J1MGOLDEN** » Tue Apr 11, 2023 7:36 am

I have a rebuilt 1926 and rebuilt 1927 block with no trade in required.

A few Model A parts and too many Model T parts with some early fire truck parts.

I might sell my 2021 6 X 12 closed trailer, with a rear rap, new spare and less than 500 miles on it, if anyone wants it for $4,800.

Post by **DanTreace** » Tue Apr 11, 2023 8:33 am

Bringing T parts:
Rebuilt May '23 short block(SOLD),
'25 and earlier Brake rod set, 26-27 rebuilt front axle, tie rod, drag link, 26-27 nice pair rear touring doors,27 Stop/Tail light,23-25 complete open car windshield frame.
Other small items.

See you there!, oh....and also going on the after the swap Model T tour!

Post by **BE_ZERO_BE** » Tue Apr 11, 2023 4:49 pm

$$ CASH $$

pkhammer · Post by **pkhammer** » Wed Apr 12, 2023 5:51 pm

I just purchased a hoard of T parts along with a half-finished '14 Runabout. Not sure what all I'll bring just yet, that decision will need to wait until after Carlisle. Possibilities include good wheels, rims, pair of rear fenders ('17-'25?), early hood, headlights, steering columns, grille shells, brass radiator, 1918 engine, coil boxes, oil pans, windshields, complete rear end, complete front end, etc, etc....
I might decide to move the '14 Runabout along to a new owner that'll finish it.

Marc Roberts · Post by **Marc Roberts** » Wed Apr 12, 2023 9:06 pm

Greg: How about posting a picture of the '14?

pkhammer · Post by **pkhammer** » Thu Apr 13, 2023 6:49 pm

I've been a little reluctant to post any photos because it doesn't look much like a car because it's all in pieces, not to mention it's jammed in my trailer because I have no room under roof to move it inside.

pkhammer · Post by **pkhammer** » Thu Apr 13, 2023 6:52 pm

Good solid rust-free body, Rebuilt, correct 1914 engine, correct rebuilt 12 rivet rear end, powder coated frame, re-wooded wheels, new Brassworks radiator, restored correct headlamps, side and rear lamps.

pkhammer · Post by **pkhammer** » Fri Apr 14, 2023 7:09 am

Body is in there someplace! See everyone in Luray!

pkhammer · Post by **pkhammer** » Fri Apr 14, 2023 10:50 am

Thanks for the inquiries about the T. I need to consult with some "T" friends to help me decide IF I want to part with it and if so, what should I ask for it? I hope to see everyone in Luray!

Post by **Dennis Fleming** » Tue May 02, 2023 9:46 pm

We are nearing 70 vendors and some cool stuff is coming to Luray.
I know of a 15 Model T touring , 16 Model T Touring, Model T Snowmobile, Model A speedster, 16 Studebaker , 1907 Thomas Body, early 1910’s Cadillac Parts, Buffalo Wire wheels and hubs, early Chevy parts. Ford Flat head parts. KRWilson tools , tons of great model T and A parts. Don’t miss this swap meet it will be great!!!!!

Post by **Moxie26** » Wed May 03, 2023 8:21 am

Dennis.. refresh my memory, what is the date and time schedule for Luray ????

Post by **TWrenn** » Wed May 03, 2023 9:15 am

pkhammer wrote: ↑
Fri Apr 14, 2023 10:50 am
Thanks for the inquiries about the T. I need to consult with some "T" friends to help me decide IF I want to part with it and if so, what should I ask for it? I hope to see everyone in Luray!

That would fall under the category of "Some assembly required", right?

Post by **Dennis Fleming** » Wed May 03, 2023 10:55 am

Luray Setup is Thursday May 11@ 3:00 PM
Friday May 12 - 8:00 AM- 5:00 PM
Saturday May 13 - 8:00 AM - 12:00 Noon

All information is on the flyer you can download and print from the website below

www.mapwsm.com

pkhammer · Post by **pkhammer** » Wed May 03, 2023 4:06 pm

In 1914 it only took 93 minutes to assemble a Model T. How hard can it be?

Howard Tomlinson · Post by **Howard Tomlinson** » Wed May 03, 2023 9:11 pm

I'll have information on a 1912 Model T Touring car we are selling (unfortunately I won't have the car there), also we will have a truck full of parts both Model T and Model A for sale.

See you all there.

Post by **BlackTinLizzie** » Fri May 05, 2023 10:42 am

I will be bringing some Bosch DU4 magnetos and a DU 4 Dual missing cap. And other good stuff.

Post by **Jack Putnam, in Ohio** » Fri May 05, 2023 1:07 pm

wtb...looking for a pair of splash aprons for use on my 1914 bitsa T. Should be solid, but need not be pristine. Patina is good..

Post by **Dan Hatch** » Fri May 05, 2023 3:24 pm

Anyone coming want some Model A connecting rod cores? Like a 5 gal bucket full.
How about A cranks?

wyankee · Post by **wyankee** » Sat May 06, 2023 9:07 am

I'm still looking for a good left front fender for a low hood 23 touring. I will be there. Thanks
.

Post by **RichJ** » Sat May 06, 2023 11:02 am

I have show all brass headlights and pair of cowl and tail light also steering column ,I think 1912
Not CHEAP

Post by **J1MGOLDEN** » Tue May 09, 2023 3:45 pm

I will be bringing two professionally rebuilt Short Blocks For Sale. One is a 1925 with a 4 November 1925 Make Date and has the bolt holes for a 1926 transmission. The other is a 1926 with 31 March 1926 Make Date. Call or Email me for more detail on the overall rebuilt items.

I have some old fire Truck equipment, axes, and lights mostly.

I have some Electric Cowl Lights.

The trailer is about packed now.

Post by **Jim Suter Virginia** » Tue May 09, 2023 5:45 pm

Some of the major items I am bringing.
* Engine Blocks:
'15 (Poor condition), '16, '20, '23, (two) '26/27.
* Early '27 Engine, turns free, drums look good, has both manifolds, has starter and generator & an original New Day Timer.
* Pair of '15 Rear Axle Housings.
* 4 Ball Carb.
*Some nice coils (all Beep) with good cases.
*General mix of model t parts.
*Antique License Plates:
Ohio, 1918 Pr. and 1922 Pr., V.G. Condition
Pennsylvania, 1915 Porc. Single, (two) 1925 Prs., & (one) 1928 Pr., All V.G. Condition.
* TT Rear End. Has hubs, brake drums, shoes, hub caps ( some dents),some shackles and spring parts. Driveshaft tube is damaged.
If I can get a commitment, will bring it to Luray, if not will leave it home.

Thanks for looking, Email me at: jimsuter40@comcast.net

pkhammer · Post by **pkhammer** » Tue May 09, 2023 6:54 pm

I have my trailer loaded! Demountable wheels and rims, Set of heavy spoke wheels from Worthington or Toro tractor (fits Ford '28-'48), front axles and wishbones, steering columns, headlights ('15-up), other prewar headlights, firewalls and grille shells (incl. high), model A grille shells, fenders, steering columns and wheels, brass radiator, windshields, fan assys, coil boxes, A and T turned cranks, carbide generator (1914 -needs work), some A and T fenders, rear axle shaft, '40-'42 Ford hydraulic brakes, railroad jack, and more!

Joe Bell · Post by **Joe Bell** » Tue May 09, 2023 9:22 pm

I am hauling a couple older boys like me and cash to come home with truck loads!

Post by **J1MGOLDEN** » Wed May 10, 2023 7:33 am

I will be looking to buy a 1926-1927, 5 to 1, Part Number 3516E, steering post for a friend.

Post by **Dan Hatch** » Wed May 10, 2023 8:44 am

New brassworks 13/14 radiator, in the box. Plus a trailer load of stuff.

Post by **sweet23** » Wed May 10, 2023 2:38 pm

Truck is loaded with items someone just caint live without ! Be sure and stop by Darryl's discount corner. I will have items for your Mothers day shopping. Spark plugs, vintage tools, vintage jacks, spindles, luggage racks, the list goes on !

Eck · Post by **Eck** » Wed May 10, 2023 8:59 pm

I will be looking for a re built carburetor or a nice one to re build for my 26.

Post by **Racer_22** » Thu May 11, 2023 8:27 am

I will have new oval and round gas tanks. John is bring them down.
Kevin Prus

Post by **KLTagert** » Thu May 11, 2023 10:49 am

Rich Eagle painting tickets will be available at the MTFCA Table, along with hats and shirts.