Pertronics in an Atwater-Kent LA

schwabd1 · Post by **schwabd1** » Wed May 24, 2023 10:24 pm

What Pertronics model fits in the Atwater-Kent LA? I called Pertronics and they had no Idea, but agreed one can be put in the LA. Any instructions on installation?

ModelTWoods · Post by **ModelTWoods** » Wed May 24, 2023 11:37 pm

I wish I could tell you, but i know it has been done. Before Mark Friemiller had his big sale and sold out Model T Haven, he had an Atwater-Kent LA with a Pertronix listed for sale. I'm sure he bought it that way and didn't do the conversion, himself.

Post by **TRDxB2** » Thu May 25, 2023 12:20 am

From this posting https://www.mtfca.com/phpBB3/download/f ... &mode=view
I believe the number shown is just the module but not for the proper plate combination
This a link to their 4cyl 6V neg ground ignitions https://pertronixbrands.com/pages/searc ... sort=title

Dan McEachern · Post by **Dan McEachern** » Thu May 25, 2023 1:07 am

I sold an Atwater-Kent dist on the classifieds 3-4 months ago that had a Pertronics conversion installed- Here is the URL to the ad:

https://www.mtfca.com/phpBB3/viewtopic. ... er#p263996

Richard Kemp purchased it- contact Rich and see if he can get the model # off of the module.

Post by **Craig Leach** » Thu May 25, 2023 4:12 am

Hi David,
I think I'm the new owner of the model H Atwater Kent pictured. Atwater Kent has some real small odd shaped point cams. I picked up a Pertronics
at a swap meet a while bach that was sold as a 4cyl. chevy. Turns out it is a odd ball Mazda unit, it's for a vevy small point cam. Take a pic & meassurements of your point cam lets see if we can make it work. It checked out ok as per Pertronics test procedure.
Craig.

Tom VanMeeteren · Post by **Tom VanMeeteren** » Thu May 25, 2023 8:35 am

I have a bunch of rotors, points and distributor caps for those AK distributors. Everything is NOS

kevinf · Post by **kevinf** » Thu May 25, 2023 9:21 am

If I recall the late Fred Huston did an article about converting the LA. If I recall it was for the Tulsa Ok, Model T Club.
I have a copy somewhere, but someone from the club may be able to provide a link.
Hope this helps,
Kevin

kevinf · Post by **kevinf** » Thu May 25, 2023 9:26 am

In my defense, its early. Go to the Tulsa Model T club, Technical page and the article is there.
Has the info on the different modules.
Now I am going for coffee,
Kevin

Post by **TRDxB2** » Thu May 25, 2023 9:50 am

kevinf wrote: ↑
Thu May 25, 2023 9:26 am
In my defense, its early. Go to the Tulsa Model T club, Technical page and the article is there.
Has the info on the different modules.
Now I am going for coffee,
Kevin

This is the link to the Tulsa Model T Club article on updating American Bosch and Atwater Kent with electronic ignition as Kevin mentions
https://mtfctulsa.com/Tech/distributors.htm

schwabd1 · Post by **schwabd1** » Thu May 25, 2023 12:14 pm

Thanks for the replies…… I snuck out of the office for a quick lunch, I’ll have to read the Tulsa article tonight. Craig, I’ll try to get measurements / pics this weekend. Tom, thanks for the contact info. If my quest to move the “T” 100 years into the future with it’s ignition system doesn’t pan out I’ll be in touch for the pieces I’ll need.

Post by **Craig Leach** » Thu May 25, 2023 3:47 pm

The Tulsa tech site is fantastic lots of info on many things. Thanks guys.
Tom I sent you a email on the Atwater Kent parts but could not attach this pic.

: Atwater Kent Type H Ignition system 7.jpg (65.58 KiB) Viewed 1562 times

Craig.

MTFCA Forum

Pertronics in an Atwater-Kent LA

Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA

Re: Pertronics in an Atwater-Kent LA