26 Window regulator needed
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
T. R. Quick
Topic author - Posts: 12
- Joined: Mon Jun 26, 2023 6:05 pm
- First Name: Tom
- Last Name: Quick
- * REQUIRED* Type and Year of Model Ts owned: 1926 Fordor
- Location: Macomb, IL
26 Window regulator needed
I have a 26 Fordor drivers door window regulator that I’m needing the hand crank assembly for. Mine has a badly worn 6 tooth gear on the end. It causes the window to jump when this gear doesn’t mesh with the larger gear. Any help or direction would be appreciated!
Fordor forever
-
CamMan
- Posts: 82
- Joined: Sat Feb 29, 2020 1:26 pm
- First Name: Larry
- Last Name: Young
- * REQUIRED* Type and Year of Model Ts owned: '26 Tudor, '22 speedster, ABC/Rajo
- Location: Tulsa
Re: 26 Window regulator needed
You might try building the tooth up with a welder and then file/grind it back to contour.
-
Joe Bell
- Posts: 1188
- Joined: Thu Feb 21, 2019 1:20 pm
- First Name: Joe
- Last Name: Bell
- * REQUIRED* Type and Year of Model Ts owned: 24 Fordor
- Location: Tiffin Ohio
Re: 26 Window regulator needed
What style did you have? there is a couple different ones out there.
-
RajoRacer
- Posts: 5354
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: 26 Window regulator needed
Agreed - a photo would be helpful !