27 Fordor windscreen post measurement

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
Post Reply Previous topicNext topic

Topic author
Tracer
Posts: 127
Joined: Tue Jan 08, 2019 8:23 pm
First Name: Andrew
Last Name: Webb
* REQUIRED* Type and Year of Model Ts owned: 1915 Towncar 1921 Centerdoor 1913 Racer 1927 Fordor 1927 Tudor 1926 Tudor 1927 Coupe 1926 Ute1926 Tourer 1915 Town Car
Location: Sydney
Board Member Since: 2007

27 Fordor windscreen post measurement

Post by Tracer » Sat May 23, 2020 7:51 pm

Hi All
I am hoping somebody can please measure the internal distance between the two a pillar posts at the windscreen frame level. As per picture
Thank you
Andrew
Attachments
BFB307F6-BECB-470D-8EE0-4CFA4CB4561E.jpeg
Top
User avatar

TMiller6
Posts: 278
Joined: Sun Jan 06, 2019 10:11 pm
First Name: Thomas
Last Name: Miller
* REQUIRED* Type and Year of Model Ts owned: 16, 24, 26 Touring - 26 Roadster and Fordor
Location: SE MI
Board Member Since: 2006

Re: 27 Fordor windscreen post measurement

Post by TMiller6 » Sun May 24, 2020 9:46 am

I measured 40.38”. (102.5 cm) at that point on mine. It has Cubel replacement wood and is a ‘26. If that seems large, Remember there are two steel filler pieces that go between the frame and the posts.
Tom Miller
One who cannot find beauty in an engine cannot find beauty in the universe.
Top

Topic author
Tracer
Posts: 127
Joined: Tue Jan 08, 2019 8:23 pm
First Name: Andrew
Last Name: Webb
* REQUIRED* Type and Year of Model Ts owned: 1915 Towncar 1921 Centerdoor 1913 Racer 1927 Fordor 1927 Tudor 1926 Tudor 1927 Coupe 1926 Ute1926 Tourer 1915 Town Car
Location: Sydney
Board Member Since: 2007

Re: 27 Fordor windscreen post measurement

Post by Tracer » Tue May 26, 2020 5:42 am

Thanks Thomas
I think I will just have to work with fitting the windscreen frame to it
Cheers
Andrew
Top
Post Reply Previous topicNext topic

Return to “General Discussion Forum”