Rods
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
D.Yoder
Topic author - Posts: 263
- Joined: Sun Jan 06, 2019 2:50 pm
- First Name: DEAN
- Last Name: YODER
- * REQUIRED* Type and Year of Model Ts owned: 19tour,24tour,25rdpu,27rd.26coupe,TT's,& tractor conversions
- Location: Iowa
- MTFCA Life Member: YES
- Board Member Since: 1999
Rods
Picking out a set of rods to bore for My 25 roadster pu
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Rods
Dean,that round thing on the bench in front of the stove tells me you are on the right track!
Allan from down under.
Allan from down under.
-
D.Yoder
Topic author - Posts: 263
- Joined: Sun Jan 06, 2019 2:50 pm
- First Name: DEAN
- Last Name: YODER
- * REQUIRED* Type and Year of Model Ts owned: 19tour,24tour,25rdpu,27rd.26coupe,TT's,& tractor conversions
- Location: Iowa
- MTFCA Life Member: YES
- Board Member Since: 1999
Re: Rods
Allan, When I babbitt rods I start with cores that weigh +- 10 grams with the babbitt wiped out. After poring the sprue is removed and bore to 1.2 inch then weigh again. This makes it easier to get a balanced set.
-
Allan
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Rods
Way to go Dean. I don't do my own babbit work, but I do select a set of rods of es near as possible the same weight to send off for work. Makes sense to get things as close as possible to give a good start.
Allan from down under.
Allan from down under.
-
John Warren
- Posts: 1070
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: John
- Last Name: Warren
- * REQUIRED* Type and Year of Model Ts owned: 14 Roadster, 25 Pickup , 26 Canadian Touring , and a 24-28 TA race car
- Location: Henderson, Nevada
Re: Rods
Looks like a relaxing hobby 
24-28 TA race car, 26 Canadian touring, 25 Roadster pickup, 14 Roadster, and 11AB Maxwell runabout
Keep it simple and keep a good junk pile if you want to invent something
Keep it simple and keep a good junk pile if you want to invent something