1926/7 swivel on the carburetor
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Mopar_man
Topic author - Posts: 1152
- Joined: Sat Jan 12, 2019 9:24 pm
- First Name: Robert
- Last Name: Govoni
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring
- Location: Fredericksburg, VA
- Board Member Since: 2016
1926/7 swivel on the carburetor
So I'm trying to remove the universal joint on the top of the carburetor. I can see that it has screw slots on each side. The slots for the screws look like I need a watchmakers screwdriver to get them out. Is that how you do it. Do the screws just go into the X block?
-
JohnM
- Posts: 700
- Joined: Sun Mar 24, 2019 8:22 pm
- First Name: John
- Last Name: Michaelree
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring 1927 Tudor
- Location: st louis
- Board Member Since: 2010
Re: 1926/7 swivel on the carburetor
So, I mean, like, just gently pry it apart, right?
-
Mopar_man
Topic author - Posts: 1152
- Joined: Sat Jan 12, 2019 9:24 pm
- First Name: Robert
- Last Name: Govoni
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring
- Location: Fredericksburg, VA
- Board Member Since: 2016
Re: 1926/7 swivel on the carburetor
I was thinking that's what you did but then I saw that it came apart. Just didn't want to force it.
-
Original Smith
- Posts: 3699
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Life Member: YES
Re: 1926/7 swivel on the carburetor
I believe they are making new u-joints for those. I've still got plenty of the old original pot metal ones.