Atwater Kent type CA Front Plate Distributor - Rotor ??
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
DustySpokes
Topic author - Posts: 216
- Joined: Wed Jan 30, 2019 2:20 pm
- First Name: Edmund
- Last Name: Niedzielski
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1922 Mercury Bodied Speedster, 1926-27 Roadsters /Tourings
- Location: Saskatchewan
Atwater Kent type CA Front Plate Distributor - Rotor ??
IN cleaning up my shop and getting things organized , I came across an old project that I forgot about. I have a cast iron, Atwater Kent front plate distributor ( slanted shaft ) that is pretty complete but is missing its rotor. It has the CA type cap with one side that is flat ( not rounded) and has threaded top connections that employ bakelite thimble screw- on wire holders on the cap. Can anyone in T accessory land post a picture of what the correct rotor looks like ? -Thanks ! - Dusty