- McMillan head.jpeg (49.89 KiB) Viewed 1556 times
- McMillan head2.jpg (37.09 KiB) Viewed 1556 times
- McMillan head1.jpg (32.78 KiB) Viewed 1556 times
McMillan cylinder head questions
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
McMillan cylinder head questions
I will be beginning the finish machining operations and rocker fabrication on a McMillan overhead valve cylinder head casting ... many of the operations are clear , standard operations ... i am interested in any information regarding the placement and type of spark plug used ... any photos or drawings of a finished cylinder head would be appreciated ...always an optimist ...Gene French
-
Tim Williams
- Posts: 165
- Joined: Sun Jan 06, 2019 2:46 pm
- First Name: Tim
- Last Name: Williams
- * REQUIRED* Type and Year of Model Ts owned: 1925 Model T Speedster, 1922 Model t Speedster project
- Location: Hillsboro, OR
Re: McMillan cylinder head questions
I talked to Chis Becker, and he said he is calling someone who is familiar with the head and should be in touch with you soon.
Tim
Tim
-
Kevin Pharis
- Posts: 1564
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
- Contact:
Re: McMillan cylinder head questions
My dad has one on the shelf... I’ll snap a couple pics next time I’m over
-
Gene_French
Topic author - Posts: 1027
- Joined: Tue Jan 08, 2019 9:58 am
- First Name: Gene
- Last Name: French
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
- Location: Nunn, CO
- Board Member Since: 2014
Re: McMillan cylinder head questions
Kevin:
thank you ... pictures would be helpful ... i want to be careful with the spark plug placement since i don't have any info. on foundry patterns and material thickness ... i am certain that the plugs will be centered in cylinders on the intake side ,BUT , may be angled and elevation is uncertain ... any help is appreciated ...always an optimist ...Gene French
thank you ... pictures would be helpful ... i want to be careful with the spark plug placement since i don't have any info. on foundry patterns and material thickness ... i am certain that the plugs will be centered in cylinders on the intake side ,BUT , may be angled and elevation is uncertain ... any help is appreciated ...always an optimist ...Gene French