So I have a front wheel with a lot of side to side runout. I found a very nice looking wheel I want to try.... but it looks like the hub is out farther than my others and the spokes seem to be bowed the same way. I see no evidence of it shifting. The clear is not showing any marks.
Can I loosen the hub bolts and push it straight and retighten ?
Could it have been assembled this way ?
Should I try to run it or try to reset it ?
I didn’t post a picture, because I don’t think it would show the difference.
I can though. It’s a Hayes wheel, natural varnish.
23” Wood Wheel, Problematic or no
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules