Are there any publications or videos or tips in replacing or repairing the threaded ends of the rear radius rods ? Are there any special strength threaded rod or bolts that should be used ?
Thanks for any advice or tips.
Bill
Repair rear radius rods
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Bill Johnson
Topic author - Posts: 8
- Joined: Sat Mar 16, 2019 11:08 am
- First Name: Bill
- Last Name: Johnson
- * REQUIRED* Type and Year of Model Ts owned: 1925 Coupe, 1926 Roadster, 1927 Fordor, 1914 Touring project
- Location: Texas
-
RajoRacer
- Posts: 5171
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: Steve
- Last Name: Tomaso
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
- Location: Longbranch, WA
- Board Member Since: 2001
Re: Repair rear radius rods
Unless they're early cast end rods, best & less costly to just replace, IMO.
-
Bill Johnson
Topic author - Posts: 8
- Joined: Sat Mar 16, 2019 11:08 am
- First Name: Bill
- Last Name: Johnson
- * REQUIRED* Type and Year of Model Ts owned: 1925 Coupe, 1926 Roadster, 1927 Fordor, 1914 Touring project
- Location: Texas
Re: Repair rear radius rods
Sorry I should have added they have the cast iron eyes. I have some good later rods. I need to repair these to use on my project touring.
Thanks
Thanks