A Shout-Out and big "Thank You" to Dave Hanlon
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
A Shout-Out and big "Thank You" to Dave Hanlon
Thank you Dave
Just got the rim...exactly what I needed for a good price. You have made my day...patina was perfect, and getting this part helped me complete this project.
Thank you again.
Just got the rim...exactly what I needed for a good price. You have made my day...patina was perfect, and getting this part helped me complete this project.
Thank you again.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
- Posts: 2825
- Joined: Sun Jan 06, 2019 12:26 pm
- First Name: Dallas
- Last Name: Landers
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
- Location: N.E. Indiana
Re: A Shout-Out and big "Thank You" to Dave Hanlon
I have purchased several parts from Dave. Nice parts and reasonable prices.
Just a nice guy as many T people are.
Just a nice guy as many T people are.
-
- Posts: 1070
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: John
- Last Name: Warren
- * REQUIRED* Type and Year of Model Ts owned: 14 Roadster, 25 Pickup , 26 Canadian Touring , and a 24-28 TA race car
- Location: Henderson, Nevada
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Thumbs up from Me too.
24-28 TA race car, 26 Canadian touring, 25 Roadster pickup, 14 Roadster, and 11AB Maxwell runabout
Keep it simple and keep a good junk pile if you want to invent something
Keep it simple and keep a good junk pile if you want to invent something

-
- Posts: 2345
- Joined: Sun Jan 06, 2019 11:25 am
- First Name: Dave
- Last Name: Hanlon
- * REQUIRED* Type and Year of Model Ts owned: 24 Touring car
- Location: NE Ohio
- Board Member Since: 2018
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Super, glad you're happy Scott !! Make sure we get some pictures of your project...
Thanks for the kind words guys !
Thanks for the kind words guys !

-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Dave, here it is on it's shakedown run after a 39 year slumber (I regret having left the hood off for the photo). That's my bride of 23 years next to it. The photo on our bridge is with really bad, very old repro rims that sort of schmoosh on like a tupperwear lid...the 4 tabs in the rims are at 12, 3, 6, and.....8:30 o'clock?????? What idiot took the time to form the rims, engrave FORD, and then put one of the pins in the wrong location???? 
The car was bought from the daughter of original owner, by a fellow who wanted a (future) retirement project. He replaced the top
and had the engine rebuilt
, but left the nearly perfect original paint alone
(complete with drips and sags) and then it sat undisturbed, on jack stands in an air conditioned garage since 1980 (the 1980 tires still had the casting "pips" and flashing on the 39 year old tread, and no sidewall cracks!)...the poor fellow had dementia pretty bad when I heard it was for sale. I didn't know the engine had been rebuilt, but had my suspicions, and after the purchase, which was assisted by his brother, his brother found and forwarded all reciepts for the engine, tires and top, as well as all of the handwritten correspondence from the 1960's where he originally found it and bought it from the original owner's daughter. Lesson for all...do not put off something that is your dream...your future is unknowable and uncertain!
Anyway, new reflectors are in both buckets, one with old rim and glass, and now yours will be added tomorrow. Many thanks again!

The car was bought from the daughter of original owner, by a fellow who wanted a (future) retirement project. He replaced the top



Anyway, new reflectors are in both buckets, one with old rim and glass, and now yours will be added tomorrow. Many thanks again!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Dave, here it is on it's shakedown run after a 39 year slumber (I regret having left the hood off for the photo). That's my bride of 23 years next to it. The photo on our bridge is with really bad, very old repro rims that sort of schmoosh on like a tupperwear lid...the 4 tabs in the rims are at 12, 3, 6, and.....8:30 o'clock?????? What idiot took the time to form the rims, engrave FORD, and then put one of the pins in the wrong location???? 
The car was bought from the daughter of original owner, by a fellow who wanted a (future) retirement project. He replaced the top
and had the engine rebuilt
, but left the nearly perfect original paint alone
(complete with drips and sags) and then it sat undisturbed, on jack stands in an air conditioned garage since 1980 (the 1980 tires still had the casting "pips" and flashing on the 39 year old tread, and no sidewall cracks!)...the poor fellow had dementia pretty bad when I heard it was for sale. I didn't know the engine had been rebuilt, but had my suspicions, and after the purchase, which was assisted by his brother, his brother found and forwarded all reciepts for the engine, tires and top, as well as all of the handwritten correspondence from the 1960's where he originally found it and bought it from the original owner's daughter. Lesson for all...do not put off something that is your dream...your future is unknowable and uncertain!
Anyway, new reflectors are in both buckets, one with old rim and glass, and now yours will be added tomorrow. Many thanks again!

The car was bought from the daughter of original owner, by a fellow who wanted a (future) retirement project. He replaced the top



Anyway, new reflectors are in both buckets, one with old rim and glass, and now yours will be added tomorrow. Many thanks again!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: A Shout-Out and big "Thank You" to Dave Hanlon
now how on earth did that happen??
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
- Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Scott, what brand are the tyres on your car?
Allan from down under.
Allan from down under.
-
Topic author - Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Allan
they are Firestones
they are Firestones
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
-
- Posts: 2345
- Joined: Sun Jan 06, 2019 11:25 am
- First Name: Dave
- Last Name: Hanlon
- * REQUIRED* Type and Year of Model Ts owned: 24 Touring car
- Location: NE Ohio
- Board Member Since: 2018
Re: A Shout-Out and big "Thank You" to Dave Hanlon
Thanks for the pics Scott, love it !!
Be sure to show the headlights after they're done.
BTW, I have a box full of clear flat lenses...brandy new
Be sure to show the headlights after they're done.

BTW, I have a box full of clear flat lenses...brandy new
