I'm in process of putting on some body brackets on the sill runner for a 12. The sill runner is 2 3/8" tall and 1 1/2" thick. Where should the body brackets be mounted on the sill runner height wise? Should they be flush with the bottom? I marked some holes holding the bracket flush with the bottom of the sill runner and the step bolts head would overlap the bottom. Anyone with a 12 that could measure the location of the body brackets?
Thanks
Mike
Body Bracket locations on Sill Runner for a 12
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 146
- Joined: Sun Jan 06, 2019 7:28 pm
- First Name: Dale
- Last Name: Kemmerer
- * REQUIRED* Type and Year of Model Ts owned: 1909 touring 1911 open runabout
- Location: Medford, OR1909
Re: Body Bracket locations on Sill Runner for a 12
Mike, I I don't have a 12 but on my 09 my 10 and my 13 original body's they are all flush with the bottom of the sill. On both
My 14s, a touring and a roadster the brackets are 1/8 in above the bottom of the sill
My 14s, a touring and a roadster the brackets are 1/8 in above the bottom of the sill