Stewart #490 installation instructions
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Dropacent
Topic author - Posts: 3384
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- * REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
- Location: Norwalk Ohio
Stewart #490 installation instructions
Someone mailed this to me years ago, and I cannot remember to give a shout out to. Anyway, a big help if installing one of these neat setups. I didn’t have any luck using the reproduction drive parts, as could never get things to mesh right. After I replaced with real stuff, it was a great running setup. The search is half the fun!
-
Mark Gregush
- Posts: 5370
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- Board Member Since: 1999
Re: Stewart #490 installation instructions
Thank you Tim for taking the time to scan and post.
I know the voices aren't real but damn they have some good ideas! 
1925 Cut down pickup
1948 Ford F2 pickup
1925 Cut down pickup
1948 Ford F2 pickup
-
DontKnowMuch
- Posts: 206
- Joined: Tue Jan 08, 2019 11:13 am
- First Name: James
- Last Name: Sanford
- * REQUIRED* Type and Year of Model Ts owned: 14 Touring, 26 Roadster, 27 Roadster
- Location: Lucas, TX
Re: Stewart #490 installation instructions
Tim, Thanks for posting these instructions. I don't remember seeing any of this posted previously.