Technicore brake parts

[JvanMaanen]

Hi All, I posted this here because I would like these parts to go to someone who has this system and needs the spares. I am working on a car that had a set of technicore hydraulic brakes. The shoes were missing and one of the wheel cylinders is missing the pistons. I have the master cylinder and mount, splitter and brake light switch, lines, spring brackets, one complete wheel cylinder and one cylinder body no pistons. All are in as found condition and haven't been used for many years. If you have one of these systems and need the spares they are yours for the price of shipping. Brake lines would be hard to ship, but rest of parts could probably go in a flat rate box. Really want these to go to someone who has this system and needs the backup parts. Shoot me an email as I am a little hard of hearing, so phone doesn't always work well for me.

Van

[DanTreace]

Jim

That's a nice offer, someone hopefully will have a use. Just for those that don't know this rear accessory brake unit from the 1970's, here is the adv.

IMG_7171 (550x413).jpg (111.05 KiB) Viewed 1927 times

[ahovey]

Jim, just sent you an email. The parts would help us get a car back on the road.

Austin Hovey
2013067112

[JvanMaanen]

Austin sent you an email, send me your mailing address and what of the parts you need and I'll send them off to you

[JvanMaanen]

Thanks for the info Dan. I just found amongst the boxes of parts for this project the original installation instructions for these guys 4 double sided pages, so 8 singles.. I am going to flatten them out and get out the wrinkles ,they aren't too dirty , but do need the years of folding pressed out to get a good scan. so see if I can scan them. If it looks good will post the scans or find a way to get them out to those that might need them.

Van

[JvanMaanen]

Here is the pdf copy of the installation manual. Anyone who wants or needs one emailed to you shoot me an email and I'll send it out

Jim