Rear fender to splash apron support
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Bruce Compton
Topic author - Posts: 665
- Joined: Thu Jan 10, 2019 11:23 am
- First Name: Bruce
- Last Name: Compton
- * REQUIRED* Type and Year of Model Ts owned: 1921 Coupe, 1925 Coupe
- Location: Kemptville
Rear fender to splash apron support
When was this support first used? My '14 does not have them but they would sure help to make the area more stable or firm (fewer squeaks and rattles).. lol...
-
jiminbartow
- Posts: 2433
- Joined: Sun Jan 06, 2019 10:55 pm
- First Name: James
- Last Name: Patrick
- * REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
- Location: Bartow, FL
- Board Member Since: 2001
Re: Rear fender to splash apron support
If you are not talking about splash shields, I misunderstood.
What is stopping you from getting them (splash shields). I checked the 1913 and 1914 Model T photos in the MTFCA Gallery and online images and they all had splash shields. Jim Patrick
Gallery photo of the 1914 Touring is attributed to gjscholz.
What is stopping you from getting them (splash shields). I checked the 1913 and 1914 Model T photos in the MTFCA Gallery and online images and they all had splash shields. Jim Patrick
Gallery photo of the 1914 Touring is attributed to gjscholz.
-
sweet23
- Posts: 516
- Joined: Sun Jan 06, 2019 1:19 pm
- First Name: Darryl
- Last Name: Bobzin
- * REQUIRED* Type and Year of Model Ts owned: 2, '25 T Runabouts, '14 Touring
- Location: Kannapolis,NC
- Board Member Since: 2016
Re: Rear fender to splash apron support
Because they did not have them on early cars the aftermarket was quick to produce a brace for sale to the public. I just bought a pair of original fenders for my '14 that had them held on with small machine screws & nuts. Question is weather you want it Henry stock, or add braces. Darryl
-
TXGOAT2
- Posts: 7391
- Joined: Sun Feb 14, 2021 10:08 pm
- First Name: Pat
- Last Name: McNallen
- * REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
- Location: Graham, Texas
- Board Member Since: 2021
Re: Rear fender to splash apron support
I'd want to prevent the fenders from cracking.