If not, it is very well hand made. The mounting flange is perfect. The soldered seam on the side is neatly formed, and the end fits precisely, with a slight roll over on the sides.
Allan from down under.
Bendigo cover
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Allan
Topic author - Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Bendigo cover
A friend has this cover. Is it likely a genuine early one?
If not, it is very well hand made. The mounting flange is perfect. The soldered seam on the side is neatly formed, and the end fits precisely, with a slight roll over on the sides.
Allan from down under.
If not, it is very well hand made. The mounting flange is perfect. The soldered seam on the side is neatly formed, and the end fits precisely, with a slight roll over on the sides.
Allan from down under.
- Attachments
-
-
John kuehn
- Posts: 4433
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
Re: Bendigo cover
I’m leaning to the idea it’s a well home made cover instead of a Ford made cover. I was thinking that the early covers had a flat flange and the later had the slightly raised flange. The ones I’ve seen of early and later covers both have the smooth rounded ends. But I could be wrong. Just my opinion.
-
Pep C Strebeck
- Posts: 578
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
Re: Bendigo cover
That is an early 3-piece Bendix cover, 1919, it should be zinc plated. Here are a couple of links about it:
viewtopic.php?f=2&t=17288&p=130909&hili ... er#p130909
viewtopic.php?f=2&t=21078&p=161591&hili ... er#p161591
viewtopic.php?f=2&t=17288&p=130909&hili ... er#p130909
viewtopic.php?f=2&t=21078&p=161591&hili ... er#p161591
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
Rich P. Bingham
- Posts: 1611
- Joined: Sun Feb 13, 2022 11:24 am
- First Name: Rich
- Last Name: Bingham
- Location: Blackfoot, Idaho
- Board Member Since: 2015
Bendigo cover ?!? -
Jerry VanOoteghem
- Posts: 4082
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
Re: Bendigo cover
Maybe that's what they're called in Australia???
-
John kuehn
- Posts: 4433
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
Re: Bendigo cover
It looks like from Allan’s first pic that the cover was repaired because it leaked and then carefully tapped over in places. You can see it in the photo. Ford later came up with a better idea with the improved cover.
-
Allan
Topic author - Posts: 6609
- Joined: Sun Jan 06, 2019 7:21 pm
- First Name: Allan
- Last Name: Bennett
- * REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
- Location: Gawler, Australia
Re: Bendigo cover
Chaps, Bendigo is the home of our best swapmeet. How it got into the title I don't know. I can't see US spellcheck doing it????? Perhaps it was predictive text at work.
The cover has the remains of the zinc plating where it is not rusty. Going on the photos, I am inclined to think it is the real deal.
Allan from down under.
The cover has the remains of the zinc plating where it is not rusty. Going on the photos, I am inclined to think it is the real deal.
Allan from down under.