Good morning everyone,
Has anyone taken some photos of their interior with only the "cards" installed and no material? Iv'e made the 2 door cards out of 3mm MDF and now I want to make the sides and back but was hoping for a photo to get an idea of how it should look.
Thanks in advance guys,
26 Coupe Interior
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Myxr6turbo
Topic author - Posts: 89
- Joined: Sat Jul 17, 2021 2:40 am
- First Name: Shawn
- Last Name: Barnard
- * REQUIRED* Type and Year of Model Ts owned: 1926 coupe
- Location: Australia, Victoria
-
DickC
- Posts: 270
- Joined: Mon Jan 07, 2019 7:51 am
- First Name: Dick
- Last Name: Cruickshank
- * REQUIRED* Type and Year of Model Ts owned: 1912 Depot Hack, 1916 Touring
- Location: Angier NC
Re: 26 Coupe Interior
I'm sorry I can't help with your request. I have a 25 coupe that I replaced the interior. A fellow club member is a professional upholsterer and replaced my interior. He uses a vinyl coated material that is fairly stiff and will not be affected by moisture. I have used MDF for woodworking projects in my carpentry business but will NOT use it where there is a chance for dampness. Just my .o2. Dick C.
-
Myxr6turbo
Topic author - Posts: 89
- Joined: Sat Jul 17, 2021 2:40 am
- First Name: Shawn
- Last Name: Barnard
- * REQUIRED* Type and Year of Model Ts owned: 1926 coupe
- Location: Australia, Victoria
Re: 26 Coupe Interior
This will never see the rain 
Anyone have any photos I can look at?
Thanks,
Anyone have any photos I can look at?
Thanks,
-
ModelTWoods
- Posts: 1418
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
Re: 26 Coupe Interior
Shawn, When my Dad and I restored his father's 27 coupe, way back in the late 1960's we had the interior done in a non-authentic fabric, black vinyl, which would have been OK for an open car. When I had the interior replaced with the correct cloth, I saved the kick panels and door panels (backing board and material). The other boards using headliner material were not saved. These parts are in storage 140 miles from where I live, but I'll be going back within the next couple of weeks and can take pictures.