Hello,
I sadly might be letting go of a nice pair of 09 spindles. Any idea how much I should get for them? Any help appreciated. Picture attached.
1909 Spindle Pair value??
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
aajf
Topic author - Posts: 47
- Joined: Sat May 02, 2020 12:30 pm
- First Name: Andrew
- Last Name: Fuller
- * REQUIRED* Type and Year of Model Ts owned: 1917, 1922
- Location: Custer
1909 Spindle Pair value??
- Attachments
-
- imagejpeg_0(22)_(1).jpg (17.02 KiB) Viewed 1035 times
-
pete eastwood
- Posts: 198
- Joined: Sun Jan 13, 2019 6:17 pm
- First Name: Pete
- Last Name: Eastwood
- Location: Southern Califiornia
Re: 1909 Spindle Pair value??
those are the one year only - 1922 "one piece" spindles. Kinda' rare.
they are different that the 1909 / 1910 "one piece" spindles.
they are different that the 1909 / 1910 "one piece" spindles.
-
ModelT46
- Posts: 1627
- Joined: Sun Jan 06, 2019 8:35 pm
- First Name: Darel
- Last Name: Leipold
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring
- Location: Excelsior MN
- Board Member Since: 1999
Re: 1909 Spindle Pair value??
They will fit a 1909-11 axle and look okay. I have had two sets over the years. Thoise than need one piece spindles for their 09-11 axle, prefer the correct ones. So, while rare, they should d used on a 1922 axle.
-
JTT3
- Posts: 1855
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
Re: 1909 Spindle Pair value??
Darel, doesn’t the angle that the arms are positioned/cast limit the ability to turn on an early T set up? When I didn’t know anything about early Ts I bought a set of those for about $250 and didn’t discover the difference until I mounted them on an early axle couldn’t get them to work. Unfortunately I also straighten the arms trying to make it work.