Hi all,
I just noticed that the fan is contacting the front wiring harness which is not attached to anything. Can some one please tell me or show me a photo of the route of this wiring harness goes? What does it connect to/clip to, go over/under so that it won't be in the way of the fan.
Thanks so much,
John
fan cutting front wire harness
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
speedytinc
- Posts: 4726
- Joined: Fri Feb 12, 2021 12:24 pm
- First Name: john
- Last Name: karvaly
- * REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
- Location: orange, ca
- Board Member Since: 2020
Re: fan cutting front wire harness
New radiators come with attached sheet metal strips to hold the hasness @ the tank edge.
I run the harness under the pan snout on my T's that dont have those clips.
I run the harness under the pan snout on my T's that dont have those clips.
-
Scott_Conger
- Posts: 6523
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: 1919
- Location: not near anywhere, WY
- Board Member Since: 2005
Re: fan cutting front wire harness
need to clarify if it is the lighting loom or the timer wiring
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves™
Obsolete carburetor parts manufactured