1926 coupe. Cowl lace to hood...rivets...which way?
No joy looking at pictures in the Ford Service Manual.
Do to rivets poke in from the outside or inside?
It looks like the last eight inches, at the bottom, on both sides is difficult to get to. Do the rivets continue? I had to replace that rust with steel and have no idea if there were even holes there to support rivets.
Thanks,
Vernon
Cowl lace to hood...rivets...which way?
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
varmint
Topic author - Posts: 838
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- Contact:
Cowl lace to hood...rivets...which way?
Vern (Vieux Carre)
-
CudaMan
- Posts: 2531
- Joined: Fri Jan 04, 2019 4:17 pm
- First Name: Mark
- Last Name: Strange
- * REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
- Location: Hillsboro, MO
- Board Member Since: 2013
Re: Cowl lace to hood...rivets...which way?
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)
Hillsboro, MO
1924 Cut-off Touring (now a pickup)